A versatile and rapid coating method via a combination of plasma polymerization and surface‐initiated SET‐LRP for the fabrication of low‐fouling surfaces

Substrate-independent and widely applicable deposition of antibacterial coatings

Antibacterial coatings are regarded as a necessary tool to prevent implant-related infections. Substrate-independent and widely applicable coating techniques are gaining significant interest to synthesize different types of antibacterial films, which can be relevant from a fundamental and application-oriented perspective. Plasma polymer- and polydopamine-based antibacterial coatings represent the most widely studied and versatile approaches among these coating techniques. Both single- and dual-functional antibacterial coatings can be fabricated with these approaches and a variety of dual-functional antibacterial coating strategies can still be explored in future work. These coatings can potentially be used for a wide range of different implants (material, shape, and size). However, for most implants, significantly more fundamental knowledge needs to be gained before these coatings can find real-life use.

Highly-reactive haloester surface initiators for ARGET ATRP readily prepared by radio frequency glow discharge plasma

New surface initiators for ARGET ATRP (activators regenerated by electron transfer atomic transfer radical polymerization) have been prepared by the plasma deposition of haloester monomers. Specifically, methyl 3-bromopropionate (M3BP), methyl 2-chloropropionate, and ethyl 2-fluoropropionate (E2FP) were plasma deposited onto glass discs using RF glow discharge plasma. This technique creates surface coatings that are resistant to delamination and rich in halogen species making them good candidates for surface initiators for ARGET ATRP. Of all the plasma polymerized surface coatings, M3BP showed the highest halogen content and was able to grow 2-hydroxyethyl methacrylate (HEMA) polymer brushes on its surface via ARGET ATRP in as little as 15 min as confirmed by XPS. Surprisingly, E2FP, a fluoroester, was also able to grow HEMA polymer brushes despite fluorine being a poor leaving group for ARGET ATRP. The versatility of RF glow discharge plasma offers a clear advantage over other techniques previously used to immobilize ARGET ATRP surface initiators.

Self-Assembling Protein-Polymer Bioconjugates for Surfaces with Antifouling Features and Low Nonspecific Binding

A new method is demonstrated for preparing antifouling and low nonspecific adsorption surfaces on poorly reactive hydrophobic substrates, without the need for energy-intensive or environmentally aggressive pretreatments. The surface-active protein hydrophobin was covalently modified with a controlled radical polymerization initiator and allowed to self-assemble as a monolayer on hydrophobic surfaces, followed by the preparation of antifouling surfaces by Cu(0)-mediated living radical polymerization of poly(ethylene glycol) methyl ether acrylate (PEGA) performed in situ. By taking advantage of hydrophobins to achieve at the same time the immobilization of protein A, this approach allowed to prepare surfaces for IgG1 binding featuring greatly reduced nonspecific adsorption. The success of the surface modification strategy was investigated by contact angle, XPS, and AFM characterization, while the antifouling performance and the reduction of nonspecific binding were confirmed by QCM-D measurements.

Substrate-Independent Micropatterning of Polymer Brushes Based on Photolytic Deactivation of Chemical Vapor Deposition Based Surface-Initiated Atom-Transfer Radical Polymerization Initiator Films

Precise microscale arrangement of biomolecules and cells is essential for tissue engineering, microarray development, diagnostic sensors, and fundamental research in the biosciences. Biofunctional polymer brushes have attracted broad interest in these applications. However, patterning approaches to creating microstructured biointerfaces based on polymer brushes often involve tedious, expensive, and complicated procedures that are specifically designed for model substrates. We report a substrate-independent, facile, and scalable technique with which to prepare micropatterned biofunctional brushes with the ability to generate binary chemical patterns. Employing chemical vapor deposition (CVD) polymerization, a functionalized polymer coating decorated with 2-bromoisobutyryl groups that act as atom-transfer radical polymerization (ATRP) initiators was prepared and subsequently modified using UV light. The exposure of 2-bromoisobutyryl groups to UV light with wavelengths between 187 and 254 nm resulted in selective debromination, effectively eliminating the initiation of ATRP. In addition, when coatings incorporating both 2-bromoisobutyryl and primary amine groups were irradiated with UV light, the amines retained their functionality after UV treatment and could be conjugated to activated esters, facilitating binary chemical patterns. In contrast, polymer brushes were selectively grown from areas protected from UV treatment, as confirmed by atomic force microscopy, time-of-flight secondary ion mass spectrometry, and imaging ellipsometry. Furthermore, spatial control over biomolecular adhesion was achieved in three ways: (1) patterned nonfouling brushes resulted in nonspecific protein adsorption to areas not covered with polymer brushes; (2) patterned brushes decorated with active binding sides gave rise to specific protein immobilization on areas presenting polymer brushes; (3) and primary amines were co-patterned along with clickable polymer brushes bearing pendant alkyne groups, leading to bifunctional reactivity. Because this novel technique is independent of the original substrate's physicochemical properties, it can be extended to technologically relevant substrates such as polystyrene, polydimethylsiloxane, polyvinyl chloride, and steel. With further work, the photolytic deactivation of CVD-based initiator coatings promises to advance the utility of patterned biofunctional polymer brushes across a spectrum of biomedical applications.

Nitrogen-doped graphene oxide monoliths crosslinked by short chain aliphatic amines

Nitrogen-doped graphene oxide monoliths (NGOMs) were readily fabricated by crosslinking graphene oxide (GO) using four different short chain aliphatic amines, i.e., ethylenediamine (EDA), dimethylaminopropylamine (DMPDA), N-isopropylethylenediamine (IPEDA), and triethylenetetramine (TETA). Depending on the structure of the amine crosslinkers, the generated monoliths showed various morphologies with different d spacing, layer thickness, and microspore size. Fourier transform-infrared (FTIR) and X-ray photoelectron spectroscopy (XPS) analyses provided evidence for the formation of covalent CN or CN bonds in all cases, indicating that the interaction of GO with amine crosslinkers involved the ring-opening reaction between GO epoxides and amine groups. The formation of both quaternary nitrogen and some nitrogen-containing heterocyclic composition inside the graphene oxide sheet were also suggested. X-Ray Diffraction (XRD) results indicated that the interspatial distance between GO sheets was increased after crosslinking. The fabricated NGOM-TETA demonstrates potential application as an adsorbent material due to its efficient removal of copper ions.

Glass surface modification via Cu(0)-mediated living radical polymerization of fluorinated and non-fluorinated acrylates

The glass surface was modified via Cu(0)-mediated living radical polymerization of butyl acrylate and trifluoroethyl methacrylate by using the grafting from and grafting to methodologies.