Tough and strong sustainable thermoplastic elastomers nanocomposite with self-assembly of SI-ATRP modified cellulose nanofibers

The ingenious design of sustainable thermoplastic elastomers (STPEs) is of great significance for the goal of the sustainable development. However, the preparation of STPEs with good mechanical performance is still complicated and challenging. Herein, to achieve a simple preparation of STPEs with strong mechanical properties, two biobased monomers (tetrahydrofurfuryl methacrylate (THFMA) and lauryl methacrylate (LMA)) were copolymerized into poly (THFMA-co-LMA) (PTL) and grafted onto TEMPO oxidized cellulose nanofiber (TOCN) via one-pot surface-initiated atom transfer radical polymerization (SI ATRP). The grafting modified TOCN could be self-assembled into nano-enhanced phases in STPEs, which are conducive to the double enhancement of the strength and toughness of the STPEs, and the size of nano-enhanced phases is mainly affected by TOCN fiber length and molecular weight of grafting chains. Especially, with the addition of 7 wt% TOCN, tensile strength, tensile strain, toughness, and glass transition temperature (Tg) of TOCN based STPEs (TOCN@PTL) exhibited 140 %, 36 %, 215 %, and 6.8 °C increase respectively, which confirmed the leading level in the field of bio-based elastomers. In general, this work constitutes a proof for the chemical modification and self-assembly behavior of TOCN by one-pot SI ATRP, and provides an alternative strategy for the preparation of high-performance STPEs.

Ultra-strong hydroxypropyl cellulose/polyvinyl alcohol composite hydrogel by combination of triple-network and mechanical training

To develop the hydrogels with high mechanical strength and excellent conductivity is always a challenging topic. In this study, the ultra-strong hydroxypropyl cellulose (HPC)/polyvinyl alcohol (PVA) composite hydrogels were prepared by combination of the triple-network and mechanical training. The proposed composite hydrogels were achieved by physically crosslinking HPC with PVA to form the first crosslinking network, in which the HPC fibers could decrease the crosslinking density of PVA matrix and generate a lot of water-rich porous area. Then, 2-hydroxyethyl acrylate (HEA), acrylamide (AM) and aluminium chloride diffused into the first network to fabricate the chemical crosslinking network and ionically cross-linked domains. The formation of triple-network enhanced the mechanical strength and toughness to 1.87 MPa and 339.09 kJ/m³, respectively. Especially, the crystalline domains of PVA chains could improve the hydrogel's fatigue resistance, and the orderly arrangement of the crystalline domains achieved through mechanical training process could further enhance the mechanical strength. The mechanical strength of pre-stretched composite hydrogel was increased up to 2.8 MPa. The composite hydrogels exhibit great applications in sensors, human-machine interactions, and wearable devices.

Two-Step 3 D-Printing Approach toward Sustainable, Repairable, Fluorescent Shape-Memory Thermosets Derived from Cellulose and Rosin

Efficiently converting biomass into multifunctional polymerized materials is a challenge to effect high-valued utilization of biomass resources. A two-step 3 D-printing approach has been developed to fabricate a class of robust, fluorescent shape-memory thermosets from cellulose and rosin-based photosensitive 3 D-printing resin solution. The stereolithography 3 D printing was first performed to form the first crosslinked network by UV-induced chain-growth polymerization, which fixed the shape of thermoset. Subsequently, isocyanate was applied to react with hydroxy in the monomer to form the second crosslinked network by thermally induced step-growth polymerization. The formation of a dual-cure network, leading to phase separation and increased crosslinking density, could greatly improve the mechanical and thermal properties of 3 D-printed thermosets and endow them with thermally triggered shape-memory properties and excellent repairability. The 3 D-printed thermosets are found to have strong luminescence resulting from aggregation-induced emission originating from rosin. In addition, these 3 D-printed thermosets could degrade in the presence of NaOH aqueous solution and in situ achieved a range of flexible conductive hydrogels that have important potential application in the flexible electronic materials and smart photoelectric materials.