Structure and properties of polyamide-6/vermiculite nanocomposites prepared by direct melt compounding

Microstructural Modification and Characterization of Sericite

Activated sericite was prepared by thermal modification, acid activation and sodium modification, and it was characterized by X-ray diffraction (XRD) analysis, differential scanning calorimetry (DSC), N₂ adsorption test, thermo-gravimetric analysis (TGA), nuclear magnetic resonance (NMR), and scanning electron microscope (SEM). The results indicated that the crystallinity of raw sericite decreased after thermal modification; the pores with sizes between 5 nm to 10 nm of thermal-modified sericite have collapsed and the surface area increased after thermal modification. The dissolving-out amount of Al3+ reached ca. 31 mg/g in the optimal processing conditions during acid activation; cation exchange capacity (CEC) of acid-treated sericite increased to 56.37 mmol/100 g meq/g after sodium modification compared with that of raw sericite (7.42 mmol/100 g). The activated sericite is a promising matrix for clay-polymer nanocomposites.

Preparation of Bio-Based Polyamide Elastomer by Using Green Plasticizers

The purpose of this work was to study the effects of three green plasticizers H₂O, glycerol, and soybean oil, on the properties of bio-based BDIS polyamides. The BDIS polyamides synthesized from the following biomass monomers: 1,4-butanediamine (BD), 1,10-decanediamine (DD), itaconic acid (IA), and sebacic acid (SA). It is interesting to note that the amorphous BDIS (IA-80%) polyamide was changed from the glassy state to the rubbery state after water soaking and induced crystallization at the same time. The H₂O-plasticized non-crosslinked BDIS (IA-80%) polyamides can be very useful for the preparation of physical water gel. The glycerol- and soybean oil-plasticized BDIS (IA-80%) polyamides displayed excellent toughness. The plasticized BDIS (IA-80%) polyamides were characterized by Fouriertransform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), mechanical testing, and X-ray diffraction (XRD).