Exploration of high-resolution ultrasonic spectroscopy as an analytical tool to study demixing and remixing in poly(N-isopropyl acrylamide)/water solutions

Linear and nonlinear viscoelasticity of concentrated thermoresponsive microgel suspensions

We present an integrated experimental and theoretical study of the dynamics and rheology of self-crosslinked, slightly charged, temperature responsive soft poly(N-isopropylacrylamide) (pNIPAM) microgels over a wide range of concentration and temperature spanning the sharp change in particle size and intermolecular interactions across the lower critical solution temperature (LCST). Dramatic, non-monotonic changes in viscoelasticity are observed as a function of temperature, with distinct concentration dependence in the dense fluid, glassy, and soft-jammed regimes. Motivated by our experimental observations, we formulate a minimalistic model for the size dependence of a single microgel particle and the change of the interparticle interaction from purely repulsive to attractive upon heating. Using microscopic equilibrium and time-dependent statistical mechanical theories, theoretical predictions are quantitatively compared with experimental measurements of the shear modulus. Good agreement is found for the nonmonotonic temperature behavior that originates as a consequence of the competition between reduced microgel packing fraction and increasing interparticle attractions. Testable predictions are made for nonlinear rheological properties such as the yield stress and strain. To our knowledge, this is the first attempt to quantitatively understand in a unified manner the viscoelasticity of dense, temperature-responsive microgel suspensions spanning a wide range of temperatures and concentrations.

Ultrasonic Monitoring of Biocatalysis in Solutions and Complex Dispersions

The rapidly growing field of chemical catalysis is dependent on analytical methods for non-destructive real-time monitoring of chemical reactions in complex systems such as emulsions, suspensions and gels, where most analytical techniques are limited in their applicability, especially if the media is opaque, or if the reactants/products do not possess optical activity. High-resolution ultrasonic spectroscopy is one of the novel technologies based on measurements of parameters of ultrasonic waves propagating through analyzed samples, which can be utilized for real-time non-invasive monitoring of chemical reactions. It does not require optical transparency, optical markers and is applicable for monitoring of reactions in continuous media and in micro/nano bioreactors (e.g., nanodroplets of microemulsions). The technology enables measurements of concentrations of substrates and products over the whole course of reaction, analysis of time profiles of the degree of polymerization and molar mass of polymers and oligomers, evolutions of reaction rates, evaluation of kinetic mechanisms, measurements of kinetic and equilibrium constants and reaction Gibbs energy. It also provides tools for assessments of various aspects of performance of catalysts/enzymes including inhibition effects, reversible and irreversible thermal deactivation. In addition, ultrasonic scattering effects in dispersions allow real-time monitoring of structural changes in the medium accompanying chemical reactions.

From particles to stabilizing blocks – polymerized ionic liquids in aqueous heterophase polymerization

Dispersions of polymerized ionic liquids (PIL) are a new class of reactive stabilizers for aqueous heterophase polymerizations, which are either hydrophilic or hydrophobic with regard to their reaction partner.

Stabile, thermoresponsive colloidal clusters: an unusual morphology of polymer dispersions

A new class of colloidal polymeric particles consisting of polystyrene spheres grown in a poly(N-isopropyl acrylamide) precursor scaffold is synthesized via redox-initiated heterophase polymerization. The morphology and thermoresponsiveness of these assemblies is proven by electron microscopy investigations and temperature-dependent measurements of the change of both the speed of sound travelling through the dispersion and the hydrodynamic particle size. Electron microscopy (EM) micrographs (transmission and scanning EM as well cryo-scanning EM) prove the existence of colloidal clusters when the freeze-dried copolymer is redispersed in pure water. The clusters have a size of several micrometers, contain about 800 polystyrene particles with diameter below 100 nm, and show a highly reproducible thermoresponsive behavior with a lower critical solution temperature corresponding to that of pure poly(N-isopropyl acrylamide).

Evaluation of polymer mucoadhesiveness by the use of acoustic spectroscopy

An innovative and simple methodology has been developed and used for the evaluation of mucoadhesive properties of several polymers by means of sound speed measurements using high-resolution acoustic spectroscopy. In systems made of polymers in water, variations in hydration shell of polymeric chains determine changes of dispersions compressibility, and this phenomenon can be monitored by sound speed measurements. Four different polymers have been selected, namely PEG 6000, Carbopol 974, HPMC K4M, and Pectin 200/USP, all characterised by very different mucoadhesive properties. Samples made of each polymer alone (0.3-1.0% w/w) or in mixture with mucin (mucin fixed at 1.0% w/w) in water were investigated while using high-resolution ultrasonic spectrometer at two different frequencies (5.2 and 8.2 MHz). Polymer-mucin interaction was evaluated comparing experimental sound speed values of polymer-mucin samples with their theoretical values derived from the addition of sound speeds obtained while analysing each component alone. Results demonstrated the ability of the acoustic method to discriminate between mucoadhesive and no mucoadhesive polymer-mucin dispersions and allowed also the comparison between their mucoadhesive strengths. The study has therefore demonstrated the potential of using high-resolution ultrasonic spectroscopy to evaluate the polymers' mucoadhesiveness, with the great advantage of testing small amount of samples even if opaque.

Origin of hysteresis observed in association and dissociation of polymer chains in water

By choosing poly(N,N-diethylacrylamide) which lacks the possibility to form intra- or inter-chain hydrogen bonds, we studied its chain association and dissociation in water by using laser light scattering (LLS), ultrasensitive differential scanning calorimetry (US-DSC) and Fourier transform infrared spectroscopy (FTIR). As the solution temperature increases, the average hydrodynamic radius (R(h)) and average radius of gyration (R(g)) decrease, indicating the intrachain shrinking. When the temperature is higher than its lower critical solution temperature (LCST, approximately 30 degrees C), the apparent weight-average molar mass (M(w,app)) increases, reflecting the interchain association. At the same time, FTIR study reveals that as the temperature increases, the area ratio of two absorption peaks, respectively, associated to one hydrogen bonded carbonyl >C=O...H-O-H and free carbonyl >C=O groups increases, while that related to two hydrated hydrogen bonded carbonyl groups decreases, indicating heating-induced dehydration. In the reversible cooling process, R(h), R(g), M(w,app) and area ratios of the absorption peak are similar to those in the heating process for each given temperature, indicating that there is no hysteresis in the interchain association and dissociation. This present study confirms that the hysteresis previously observed for a sister polymer, poly(N-isopropylacrylamide), is due to the formation of some additional hydrogen bonds in its collapsed state at temperatures higher than the LCST.

Monitoring the aggregation behaviour of self-assembling polymers through high-resolution ultrasonic spectroscopy

Poloxamer 407 is a well-known self-assembling polymer with a wide range of temperature- and concentration-dependent phase behaviour, such as micellization and gelation. This work was carried out to demonstrate the potential of high-resolution ultrasonic spectroscopy in evaluating aggregation-deaggregation behaviour of self-assembling polymers. In order to achieve this objective, six different concentrations of Poloxamer 407 water dispersion were prepared and analysed between 5 and 35 degrees C using ultrasonic spectroscopy. For comparison, the same samples were also analysed by the DSC technique. The results showed that polymer aggregation process can be successfully monitored using both ultrasonic parameters of sound speed and attenuation. Furthermore, good agreement with DSC data was observed in terms of characteristic transition temperatures and also in terms of micellization kinetics and related parameters.

Poly(L-lysine)-modified iron oxide nanoparticles for stem cell labeling

New surface-modified iron oxide nanoparticles were developed by precipitation of Fe(II) and Fe(III) salts with ammonium hydroxide and oxidation of the resulting magnetite with sodium hypochlorite, followed by the addition of poly( L-lysine) (PLL) solution. PLL of several molecular weights ranging from 146 ( L-lysine) to 579 000 was tested as a coating to boost the intracellular uptake of the nanoparticles. The nanoparticles were characterized by TEM, dynamic light scattering, FTIR, and ultrasonic spectrometry. TEM revealed that the particles were ca. 6 nm in diameter, while FTIR showed that their surfaces were well-coated with PLL. The interaction of PLL-modified iron oxide nanoparticles with DMEM culture medium was verified by UV-vis spectroscopy. Rat bone marrow stromal cells (rMSCs) and human mesenchymal stem cells (hMSC) were labeled with PLL-modified iron oxide nanoparticles or with Endorem (control). Optical microscopy and TEM confirmed the presence of PLL-modified iron oxide nanoparticles inside the cells. Cellular uptake was very high (more than 92%) for PLL-modified nanoparticles that were coated with PLL (molecular weight 388 00) at a concentration of 0.02 mg PLL per milliliter of colloid. The cellular uptake of PLL-modified iron oxide was facilitated by its interaction with the negatively charged cell surface and subsequent endosomolytic uptake. The relaxivity of rMSCs labeled with PLL-modified iron oxide and the amount of iron in the cells were determined. PLL-modified iron oxide-labeled rMSCs were imaged in vitro and in vivo after intracerebral grafting into the contralateral hemisphere of the adult rat brain. The implanted cells were visible on magnetic resonance (MR) images as a hypointense area at the injection site and in the lesion. In comparison with Endorem, nanoparticles modified with PLL of an optimum molecular weight demonstrated a higher efficiency of intracellular uptake by MSC cells.