New solvent for polyrotaxane. II. Dissolution behavior of polyrotaxane in ionic liquids and preparation of ionic liquid-containing slide-ring gels

Pressure-Sensitive Supramolecular Adhesives Based on Lipoic Acid and Biofriendly Dynamic Cyclodextrin and Polyrotaxane Cross-Linkers

Slide-ring materials are polymer networks with mobile cross-links that exhibit impressive stress dissipation and fracture resistance owing to the pulley effect. On account of their remarkable ability to dissipate the energy of deformation, these materials have found their way into advanced materials such as abrasion-resistant coatings and elastic battery electrode binders. In this work, we explore the role of mobile cross-links on the properties of a biofriendly pressure-sensitive adhesive made using composites of cyclodextrin-based macromolecules and poly(lipoic acid). We modify cyclodextrin-based hosts and polyrotaxanes with pendant groups of lipoic acid (a commonly ingested antioxidant) to incorporate them as cross-links in poly(lipoic acid) networks obtained by simple heating in open air. By systematically varying the adhesive formulations while probing their mechanical and adhesive properties, we uncover trends in structure-property relationships that enable one to tune network properties and access biofriendly, high-tack adhesives.

Chemorheological Monitoring of Cross-Linking in Slide-ring Gels Derived From α-cyclodextrin Polyrotaxanes

Despite hundreds of studies involving slide-ring gels derived from cyclodextrin (CD)-based polyrotaxanes (PRs), their covalent cross-linking kinetics are not well characterized. We employ chemorheology as a tool to measure the gelation kinetics of a model slide-ring organogel derived from α-cyclodextrin/poly (ethylene glycol) PRs cross-linked with hexamethylenediisocyanate (HMDI) in DMSO. The viscoelastic properties of the gels were monitored in situ by small-amplitude oscillatory shear (SAOS) rheology, enabling us to estimate the activation barrier and rate law for cross-linking while mapping experimental parameters to kinetics and mechanical properties. Gelation time, gel point, and final gel elasticity depend on cross-linker concentration, but polyrotaxane concentration only affects gelation time and elasticity (not gel point), while temperature only affects gelation time and gel point (not final elasticity). These measurements facilitate the rational design of slide-ring networks by simple parameter selection (temperature, cross-linker concentration, PR concentration, reaction time).

Polymer network formation mechanism of multifunctional poly(ethylene glycol)s in ionic liquid electrolyte with a lithium salt

We report a controlled polymer network gel electrolyte based on a multifunctional poly(ethylene glycol) (PEG) prepolymer (herein, tetrafunctional PEGs (tetra-PEGs) and bisfunctional linear PEGs (linear-PEGs)) and an ionic liquid (IL)-based electrolyte solution containing lithium bis(trifluoromethanesulfonyl)imide (LiTFSA) salt. The gel electrolyte was obtained via a gelation reaction, i.e., the Michael addition reaction between maleimide (MA)-terminated tetra-PEGs and thiol (SH)-terminated tetra- or linear-PEGs (termed tetra/tetra-PEG gel or tetra/linear-PEG gel systems), in a LiTFSA/IL solution under noncatalytic conditions at room temperature. For the tetra/linear-PEG system, the gelation reaction depended on the ratio of tetra-PEG-MA and linear-PEG-SH; an optimum terminal MA/SH ratio of 1 : 1 yielded a reaction efficiency (p) of ∼98% (an ideal polymer network structure). The tetra/tetra-PEG system with an MA/SH ratio of 1 : 1 also achieved a reaction efficiency of ∼98%. Time-resolved rheological measurements revealed that the network formation process can be categorized into three steps: (I) oligomer formation at an early stage of the reaction, (II) formation of a roughly linked polymer network with a large mesh size as the reaction proceeded, and (III) full network formation also at the local scale near the gelation completion time. The resulting tetra/linear-PEG ion gel with an optimum MA/SH ratio of 1 : 1 exhibited high stretchability, enduring approximately 10-fold elongation, and superior ion-conducting properties compared with the corresponding IL-based electrolyte solution.

Softness, Elasticity, and Toughness of Polymer Networks with Slide-Ring Cross-Links

Slide-ring (SR) gels cross-linked by ring molecules are characterized by softness (low Young's modulus), elasticity (low hysteresis loss), and toughness (large fracture energy). In this article, the mechanical and fracture properties of SR gels are reviewed to clarify the physical understanding of the relationship between the molecular-level sliding dynamics of the slide-ring cross-links and macroscopic properties of SR gels. The low Young's modulus and large fracture energy of SR gels are expressed by simple equations as a function of the degree of sliding movement. The dynamic fracture behaviors of SR gels gives us the time scale of the sliding dynamics of the cross-links, which is at the micro-sec scale. The fast sliding motion of the cross-links leads to the elasticity of the SR gels. The SR concept can be applied to solvent-free elastomers and composite materials.

Unusual Fracture Behavior of Slide-Ring Gels with Movable Cross-Links

In this study, the quasi-static fracture behavior of slide-ring gels (SR gels), in which movable cross-links can slide on polymer chains, is for the first time investigated and compared to that of conventional polymer gels with fixed cross-links (FC gels). For the usual FC gels, there is a trade-off relation between toughness (fracture energy [Formula: see text]) and stiffness (Young's modulus E): with increasing cross-linking density, the Young's modulus E increases, while fracture energy [Formula: see text] decreases. However, SR gels show an unusual fracture behavior that contradicts this trade-off relation. The fracture energy of SR gels is independent of the Young's modulus, in other words, the cross-linking density; moreover, it rises with increasing slidable range of movable cross-links on polymer chains. A new molecular model is proposed by attributing the unusual fracture properties of SR gels to the relative sliding movement between polymer chains and cross-links. Utilizing this concept, simultaneous fulfillment of high stiffness and high toughness in polymer gels can be realized.

Inorganic/Organic Double-Network Gels Containing Ionic Liquids

Highly robust ion gels, termed double-network (DN) ion gels, composed of inorganic/organic interpenetrating networks and a large amount of ionic liquids (ILs), are fabricated. The DN ion gels with an 80 wt% IL content show extraordinarily high mechanical strength: more than 28 MPa of compressive fracture stress. In the DN ion gel preparation, a brittle inorganic network of physically bonded silica nanoparticles and a ductile organic network of polydimethylacrylamide (PDMAAm) are formed in the IL. Because of the different reaction mechanisms of the inorganic/organic networks, the DN ion gels can be formed by an easy and free-shapeable one-pot synthesis. They can be prepared in a controllable manner by manipulating the formation order of the inorganic and organic networks via not only multistep but also single-step processes. When silica particles form a network prior to the PDMAAm network formation, DN ion gels can be prepared. The brittle silica particle network in the DN ion gel, serving as sacrificial bonds, easily ruptures under loading to dissipate energy, while the ductile PDMAAm network maintains the shape of the material by the rubber elasticity. Given the reversible physical bonding between the silica particles, the DN ion gels exhibit a significant degree of self-recovery by annealing.

Polysiloxane ionic liquids as good solvents for β-cyclodextrin-polydimethylsiloxane polyrotaxane structures

An ionic liquid based on polydimethylsiloxane with imidazolium salt brushes was synthesized as a good solvent for β-cyclodextrin-polydimethylsiloxane rotaxane. As expected the PDMS-Im/Br ionic liquid had a liquid-like non-Newtonian behavior with rheological parameters dependent on frequency and temperature. The addition of rotaxane to the ionic liquid strengthened the non-Newtonian character of the sample and a type of stable liquid-like network was formed due to the contribution of weak ionic interactions. The structure is stable in the 20 to 80 °C domain as proved by the oscillatory and rotational rheological tests.

Preparation of a "sliding graft copolymer", an organic solvent-soluble polyrotaxane containing mobile side chains, and its application for a crosslinked elastomeric supramolecular film

A novel "sliding graft copolymer" (SGC), in which many linear poly-ε-caprolactone (PCL) side chains are bound to cyclodextrin rings of a polyrotaxane, was prepared by ring-opening polymerization of ε-caprolactone initiated by hydroxyl groups of the polyrotaxane. An amorphous, flexible, and sufficiently tough elastomer film was prepared by crosslinking the obtained SGC-a supramolecule possessing a number of mobile side chains-with hexamethylene diisocyanate (HMDI).

Recent advances in the preparation of cyclodextrin-based polyrotaxanes and their applications to soft materials

The present review article deals with recent novel studies on the preparation and application of polyrotaxanes comprised of cyclodextrins (CDs) and various linear polymers, especially poly(ethylene glycol) (PEG). First, a brief introduction of the historical background of the pioneering work on the preparation of an inclusion complex and polyrotaxane is provided. Subsequently, the authors have focused on the recently developed solvent systems for the polyrotaxane. These new solvents are interesting from two fundamental viewpoints: (1) from the perspective of the clarification of the hydrogen-bonding-based dissolution mechanism of polyrotaxanes; and (2) from the practical viewpoint of the preparation of modified polyrotaxanes or slide-ring gels containing ionic liquids. A wide variety of polyrotaxane derivatives, whose cyclodextrin moiety was modified to carry various functional groups, and their intriguing characteristics are introduced in this article. Finally, many instances of the application of the PEG-CD polyrotaxane to soft materials, such as gels, molecular tubes and multivalent ligand systems, are summarized.

Liquid–liquid equilibria of polyrotaxane and poly(vinyl alcohol)

Liquid-liquid equillibria (LLE) of the tertiary system of hydroxypropylated polyrotaxane (HPPR)-poly(vinyl alcohol) (PVA)-solvent have been investigated by focusing on the internal structures of HPPR-PVA blend gels. The phase diagrams of the HPPR-PVA aqueous systems displayed two liquid phases at a high concentration and molecular weight of PVA. This result was consistent with the prediction of the Flory-Huggins lattice model. On the contrary, the HPPR-PVA-DMSO system exhibited only a single phase. The HPPR-PVA blend gels crosslinked in dimethylsulfoxide (DMSO) were highly transparent over a wide concentration range, while the gels prepared in water were opaque at high polymer concentrations. Spherical domains were observed in the opaque gels by laser scanning confocal microscopy, and the sizes of the domains were significantly dependent on the amount of cross-linking reagent utilized. These results indicated that the transparency of the HPPR-PVA blend gels was strongly affected by the competition between the liquid-liquid two-phase separation and the crosslinking HPPR and PVA polymers during the preparation of the blend gels.