Organosolv Lignin Improved Thermoplastic Elastomeric Behavior of Polyethylene/Polyisoprene Blend

Thermoplastic elastomers are considered the fastest-growing elastomers in recent years because of their thermomechanical recyclability, in contrast to traditional thermoset rubbers. Polyolefins such as low-density polyethylene (LDPE) show low mechanical properties, particularly poor elongation when compared with an elastomer or rubber. In this study, LDPE resin is converted to highly ductile rubber-like materials with high elongation and low modulus properties on blending with polyisoprene rubber (IR), followed by treating with dicumyl peroxide as a curing agent and organosolv lignin as an additive. The technique of high shear melt-mixing, in conjunction with vulcanization or crosslinking using organic peroxide, is used to develop hybrid materials based on the LDPE/IR blend at a 70/30 mass ratio, where LDPE is replaced partly with lignin. Various characteristics such as tensile, viscoelasticity, melt flow, crystallinity, and phase morphology of the materials are analyzed. As expected, vulcanization with peroxide can improve the mechanical performance of the LDPE/IR blends, which is further improved with the application of lignin (2 to 5 wt. %), particularly tensile strain is profoundly increased. For example, the average values of the tensile strength, the modulus, and the ultimate elongation of neat LDPE resin are 7.8 MPa, 177 MPa, and 62%, respectively, and those of LDPE/IR/lignin/DCP 65/30/05/2 are 8.1 MPa, 95 MPa, and 238%, respectively. It indicates that the application of lignin/DCP has a profound effect on improving the ductility and elastomeric characteristics of the materials; thus, this material can have the potential to replace traditional rubber products.

Bond order effects on the optoelectronic properties of oxygen/sulfur functionalized adamantanes

The objective of this work, is to study adamantanes and to tune their bandgap, since pure adamantane is considered as an insulator due to its high bandgap energy. For this, we doped adamantane with oxygen and sulfur atoms, thus obtaining 730 different structures with double bonds and 730 different structures with single bonds, for a total of 1460 structures, and compared their properties. Among all, 31 molecules were selected that best represented the reduced bandgap behavior. The calculations with greater precision in its results were made using the Local Density Approximation (LDA), in the Density-Functional Theory (DFT) formalism, with PWC functional and TNP basis set. The electronic and optical properties were analyzed, by calculating the energy gap and absorption spectrum. Importantly, we observed that molecules doped with sulfur atoms (double bonds) had their energy gap reduced significantly compared to molecules doped with sulfur and/or oxygen atom with single bonds and pristine adamantane. It was found that in the absorption spectrum, the sulfur-doped structures had their spectrum shifted to the visible region, a fact that becomes relevant for potential dyes and optoelectronic applications. From the seven selected functionalized adamantanes (ADD-04, ADD-05, ADD-07, ADD-19, ADD-20, ADD-41, and ADD-48), any of these could be used as a dye. However, the ADD-20 molecule in particular, which presented optical absorption near (RGB) primary colors, could indicate a potential quantum dot material for application in developing screens of various electronic devices.

Physical properties of materials derived from diamondoid molecules

Diamondoids are small hydrocarbon molecules which have the same rigid cage structure as bulk diamond. They can be considered the smallest nanoparticles of diamond. They exhibit a mixture of properties inherited from bulk cubic diamond as well as a number of unique properties related to their size and structure. Diamondoids with different sizes and shapes can be separated and purified, enabling detailed studies of the effects of size and structure on the diamondoids' properties and also allowing the creation of chemically functionalized diamondoids which can be used to create new materials. Most notable among these new materials are self-assembled monolayers of diamondoid-thiols, which exhibit a number of unique electron emission properties.