Optically induced birefringence and holography in silk

Nanoporous silk films with capillary action and size-exclusion capacity for sensitive glucose determination in whole blood

In optical biosensing, silk fibroin (SF) appears as a promising alternative where other materials, such as paper, find limitations. Besides its excellent optical properties and unmet capacity to stabilize biomacromolecules, SF in test strips exhibits additional functions, i.e. capillary pumping activity of 1.5 mm s^-1, capacity to filter blood cells thanks to its small, but tuneable, porosity and enhanced biosensing sensitivity. The bulk functionalization of SF with the enzymes glucose oxidase and peroxidase and the mediator ABTS produces colourless and transparent SF films that respond to blood glucose increasing 2.5 times the sensitivity of conventional ABTS-based assays. This enhanced sensitivity results from the formation of SF-ABTS complexes, where SF becomes part of the bioassay. Additionally, SF films triple the durability of most stable cellulose-based sensors. Although demonstrated for glucose, SF microfluidic test strips may incorporate other optical bioassays, e.g. immunoassays, with the aim of transferring them from central laboratories to the place of patient's care.

Recombinant Silk Fiber Properties Correlate to Prefibrillar Self-Assembly

Spider silks are desirable materials with mechanical properties superior to most synthetic materials coupled with biodegradability and biocompatibility. In order to replicate natural silk properties using recombinant spider silk proteins (spidroins) and wet-spinning methods, the focus to date has typically been on modifying protein sequence, protein size, and spinning conditions. Here, an alternative approach is demonstrated. Namely, using the same ≈57 kDa recombinant aciniform silk protein with a consistent wet-spinning protocol, fiber mechanical properties are shown to significantly differ as a function of the solvent used to dissolve the protein at high concentration (the "spinning dope" solution). A fluorinated acid/alcohol/water dope leads to drastic improvement in fibrillar extensibility and, correspondingly, toughness compared to fibers produced using a previously developed fluorinated alcohol/water dope. To understand the underlying cause for these mechanical differences, morphology and structure of the two classes of silk fiber are compared, with features tracing back to dope-state protein structuring and preassembly. Specifically, distinct classes of spidroin nanoparticles appear to form in each dope prior to fiber spinning and these preassembled states are, in turn, linked to fiber morphology, structure, and mechanical properties. Tailoring of dope-state spidroin nanoparticle assembly, thus, appears a promising strategy to modulate fibrillar silk properties.

Simple multi-wavelength imaging of birefringence:case study of silk

Polarised light imaging microscopy, with the addition of a liquid crystal (LC) phase retarder, was used to determine the birefringence of silk fibres with high (∼1 μm) spatial resolution. The measurement was carried out with the silk fibres (the optical slow axis) and the slow axis of the LC-retarder set at parallel angles. The direct fit of the transmission data allowed for high fidelity determination of the birefringence Δn ≈ 1.63 × 10^-2 (with ∼2% uncertainty) of the brown silk fibre, (Antheraea pernyi) averaged over the wavelength range λ = (425-625) nm. By measuring retardance at four separate wavelengths, it was possible to determine the true value of the birefringence of a thicker sample when an optical path may include a large number of wavelengths. The numerical procedures and required hardware are described for the do-it-yourself assembly of the imaging polariscope at a fractional budget compared to commercial units.

Conformal Silk-Azobenzene Composite for Optically Switchable Diffractive Structures

The use of biomaterials as optical components has recently attracted attention because of their ease of functionalization and fabrication, along with their potential use when integrated with biological materials. We present here an observation of the optical properties of a silk-azobenzene material (Azosilk) and demonstrate the operation of an Azosilk/PDMS composite structure that serves as a conformable and switchable optical diffractive structure. Characterization of thermal and isomeric properties of the device, along with its overall performance, is presented in terms of diffractive characteristics and response times. The ease of manufacturing and functionalization opens a promising avenue for rapid device prototyping and interfaces of expanded utility.

Photo-induced structural modification of silk gels containing azobenzene side groups

Azobenzene modification of Bombyx mori silkworm silk creates a photo-responsive 'azosilk' biomaterial, allowing for 3D laser patterning. Written regions fluoresce, and become fluid-filled raised 'micro-blisters' with a 10-fold photo-softening effect of the modulus. Patterning is facile and versatile, with potential applications as soft tunable materials for dynamic cell guidance and microfluidics.

Evaluation of the Spectral Response of Functionalized Silk Inverse Opals as Colorimetric Immunosensors

Regenerated silk fibroin is a high molecular weight protein obtained by purifying the cocoons of the domesticated silkworm, Bombyx mori. This report exploits the aqueous processing and tunable β sheet secondary structure of regenerated silk to produce nanostructures (i.e., inverse opals) that can be used as colorimetric immunosensors. Such sensors would enable direct detection of antigens by changes in reflectance spectra induced by binding events within the nanostructure. Silk inverse opals were prepared by solution casting and annealing in a humidified atmosphere to render the silk insoluble. Next, antigen sensing capabilities were imparted to silk through a three step synthesis: coupling of avidin to silk surfaces, coupling of biotin to antibodies, and lastly antibody attachment to silk through avidin-biotin interactions. Varying the antibody enables detection of different antigens, as demonstrated using different protein antigens: antibodies, red fluorescent protein, and the beta subunit of cholera toxin. Antigen binding to sensors induces a red shift in the opal reflectance spectra, while sensors not exposed to antigen showed either no shift or a slight blue shift. This work constitutes a first step for the design of biopolymer-based optical systems that could directly detect antigens using commercially available reagents and environmentally friendly chemistries.

Natural Silk as a Photonics Component: a Study on Its Light Guiding and Nonlinear Optical Properties

Silk fibers are expected to become a pathway to biocompatible and bioresorbable waveguides, which could be used to deliver localized optical power for various applications, e.g., optical therapy or imaging inside living tissue. Here, for the first time, the linear and nonlinear optical properties of natural silk fibers have been studied. The waveguiding properties of silk fibroin of largely unprocessed Bombyx mori silkworm silk are assessed using two complementary methods, and found to be on the average 2.8 dB mm(-1). The waveguide losses of degummed silk are to a large extent due to scattering from debris on fiber surface and helical twisting of the fiber. Nonlinear optical microscopy reveals both configurational defects such as torsional twisting, and strong symmetry breaking at the center of the fiber, which provides potential for various nonlinear applications. Our results show that nonregenerated B. mori silk can be used for delivering optical power over short distances, when the waveguide needs to be biocompatible and bioresorbable, such as embedding the waveguide inside living tissue.

Transdermal delivery devices: fabrication, mechanics and drug release from silk

Microneedles are a relatively simple, minimally invasive and painless approach to deliver drugs across the skin. However, there remain limitations with this approach because of the materials most commonly utilized for such systems. Silk protein, with tunable and biocompatibility properties, is a useful biomaterial to overcome the current limitations with microneedles. Silk devices preserve drug activity, offer superior mechanical properties and biocompatibility, can be tuned for biodegradability, and can be processed under aqueous, benign conditions. In the present work, the fabrication of dense microneedle arrays from silk with different drug release kinetics is reported. The mechanical properties of the microneedle patches are tuned by post-fabrication treatments or by loading the needles with silk microparticles, to increase capacity and mechanical strength. Drug release is further enhanced by the encapsulation of the drugs in the silk matrix and coating with a thin dissolvable drug layer. The microneedles are used on human cadaver skin and drugs are delivered successfully. The various attributes demonstrated suggest that silk-based microneedle devices can provide significant benefit as a platform material for transdermal drug delivery.

High-resolution nanomechanical analysis of suspended electrospun silk fibers with the torsional harmonic atomic force microscope

Atomic force microscopes have become indispensable tools for mechanical characterization of nanoscale and submicron structures. However, materials with complex geometries, such as electrospun fiber networks used for tissue scaffolds, still pose challenges due to the influence of tension and bending modulus on the response of the suspended structures. Here we report mechanical measurements on electrospun silk fibers with various treatments that allow discriminating among the different mechanisms that determine the mechanical behavior of these complex structures. In particular we were able to identify the role of tension and boundary conditions (pinned versus clamped) in determining the mechanical response of electrospun silk fibers. Our findings show that high-resolution mechanical imaging with torsional harmonic atomic force microscopy provides a reliable method to investigate the mechanics of materials with complex geometries.

Photoresponsive retinal-modified silk-elastin copolymer

The chimeric proteins, silk-elastin-like protein polymers (SELPs), consist of repeating units of silk and elastin to retain the mechanical strength of silk, while incorporating the dynamic environmental sensitivity of elastin. A retinal-modified SELP was prepared, modified, and studied for photodynamic responses. The protein was designed, cloned, expressed, and purified with lysine present in the elastin repeats. The purified protein was then chemically modified with the biocompatible moiety retinal via the lysine side chains. Structural changes with the polymer were assessed before and after retinal modification using Fourier transform infrared spectroscopy and circular dichroism spectroscopy. Optical studies and spectral analysis were performed before and after retinal modification. The random-coil fraction of the protein increased after retinal modification while the β-sheet fraction significantly decreased. Birefringence of the modified protein was induced when irradiated with a linearly polarized 488 nm laser light. Retinal modification of this protein offers a useful strategy for potential use in biosensors, controlled drug delivery, and other areas of biomedical engineering.