Solubilization of cellulosomal cellulases by fusion with cellulose-binding domain of noncellulosomal cellulase engd from Clostridium cellulovorans

Protein Design: From the Aspect of Water Solubility and Stability

Water solubility and structural stability are key merits for proteins defined by the primary sequence and 3D-conformation. Their manipulation represents important aspects of the protein design field that relies on the accurate placement of amino acids and molecular interactions, guided by underlying physiochemical principles. Emulated designer proteins with well-defined properties both fuel the knowledge-base for more precise computational design models and are used in various biomedical and nanotechnological applications. The continuous developments in protein science, increasing computing power, new algorithms, and characterization techniques provide sophisticated toolkits for solubility design beyond guess work. In this review, we summarize recent advances in the protein design field with respect to water solubility and structural stability. After introducing fundamental design rules, we discuss the transmembrane protein solubilization and de novo transmembrane protein design. Traditional strategies to enhance protein solubility and structural stability are introduced. The designs of stable protein complexes and high-order assemblies are covered. Computational methodologies behind these endeavors, including structure prediction programs, machine learning algorithms, and specialty software dedicated to the evaluation of protein solubility and aggregation, are discussed. The findings and opportunities for Cryo-EM are presented. This review provides an overview of significant progress and prospects in accurate protein design for solubility and stability.

Self-cleaved expression of recombinant lysostaphin from its cellulose binding domain fusion

Mature lysostaphin (mLst) is a glycineglycine endopeptidase, capable of specifically cleaving penta-glycine crosslinker in the peptidoglycan of Staphylococcus aureus cell wall. It is a very effective therapeutic enzyme to kill the multidrug-resistant S. aureus often encountered in hospital acquired infections. Fusing cellulose binding domain (CBD) to mLst significantly reduced the insoluble expression of mLst in E. coli. Employing mLst-cleavable peptides as fusion linkers leaded to an effective self-cleavage expression that CBD and mLst could be completely cleaved off from the fusions during the expression process. The presence of residue linker fragment at N-terminus of the cleaved-off mLst strongly inhibited the cell lytic activity of the recovered recombinant mLst, and only ~ 50% of the wild-type mLst activity could be retained. Intact CBD-Lst fusions were obtained when uncleavable peptide linkers were employed. With CBD at N-terminus of mLst, the intact fusion completely lost its cell lytic activity but the dipeptidase activity still remained. In contrast, approximately 10% cell lytic activity of mLst still could be maintained for the fusion with CBD at C-terminus of mLst. KEY POINTS: • CBD fusion enhanced soluble expression of recombinant lysostaphin. • In vivo self-cleavage of fusion linkers by the expressed lysostaphin fusions. • Self-cleaved lysostaphin fusions retain most of dipeptidase but lose 50% cell lytic activity.

The Protocatechuate 3,4-Dioxygenase Solubility (PCDS) Tag Enhances the Expression and Solubility of Heterogenous Proteins in Escherichia coli

Escherichia coli has been developed as the most common host for recombinant protein expression. Unfortunately, there are still some proteins that are resistant to high levels of heterologous soluble expression in E. coli. Protein and peptide fusion tags are one of the most important methods for increasing target protein expression and seem to influence the expression efficiency and solubility as well. In this study, we identify a short 15-residue enhancing solubility peptide, the PCDS (protocatechuate 3,4-dioxygenase solubility) tag, which enhances heterologous protein expression in E. coli. This PCDS tag is a 45-bp long sequence encoding a peptide tag involved in the soluble expression of protocatechuate 3,4-dioxygenase, encoded by the pcaHG98 genes of Pseudomonas putida NCIMB 9866. The 45-bp sequence was also beneficial for pcaHG98 gene amplification. This tag was shown to be necessary for the heterologous soluble expression of PcaHG98 in E. coli. Purified His6-PcaHG98e04-PCDS exhibited an activity of 205.63±14.23U/mg against protocatechuate as a substrate, and this activity was not affected by a PCDS tag. This PCDS tag has been fused to the mammalian yellow fluorescent protein (YFP) to construct YFP-PCDS without its termination codons and YFPt-PCDS with. The total protein expressions of YFP-PCDS and YFPt-PCDS were significantly amplified up to 1.6-fold and 2-fold, respectively, compared to YFP alone. Accordingly, His6-YFP-PCDS and His6-YFPt-PCDS had 1.6-fold and 3-fold higher soluble protein yields, respectively, than His6-YFP expressed under the same conditions. His6-YFP, His6-YFP-PCDS, and His6-YFPt-PCDS also showed consistent fluorescence emission spectra, with a peak at 530nm over a scanning range from 400 to 700nm. These results indicated that the use of the PCDS tag is an effective way to improve heterologous protein expression in E. coli.

Industrial Use of Cell Wall Degrading Enzymes: The Fine Line Between Production Strategy and Economic Feasibility

Cell Wall Degrading Enzymes (CWDEs) are a heterogeneous group of enzymes including glycosyl-hydrolases, oxidoreductases, lyases, and esterases. Microbes with degrading activities toward plant cell wall polysaccharides are the most relevant source of CWDEs for industrial applications. These organisms secrete a wide array of CWDEs in amounts strictly necessary for their own sustenance, nonetheless the production of CWDEs from wild type microbes can be increased at large-scale by using optimized fermentation strategies. In the last decades, advances in genetic engineering allowed the expression of recombinant CWDEs also in lab-domesticated organisms such as E. coli, yeasts and plants, dramatically increasing the available options for the large-scale production of CWDEs. The optimization of a CWDE-producing biofactory is a hard challenge that biotechnologists tackle by testing different expression strategies and expression-hosts. Although both the yield and production costs are critical factors to produce biomolecules at industrial scale, these parameters are often disregarded in basic research. This review presents the main characteristics and industrial applications of CWDEs directed toward the cell wall of plants, bacteria, fungi and microalgae. Different biofactories for CWDE expression are compared in order to highlight strengths and weaknesses of each production system and how these aspects impact the final enzyme cost and, consequently, the economic feasibility of using CWDEs for industrial applications.

In Vivo Removal of N-Terminal Fusion Domains From Recombinant Target Proteins Produced in Nicotiana benthamiana

Plants show great potential for producing recombinant proteins in a cost-effective manner. Many strategies have therefore been employed to express high levels of recombinant proteins in plants. Although foreign domains are fused to target proteins for high expression or as an affinity tag for purification, the retention of foreign domains on a target protein may be undesirable, especially for biomedical purposes. Thus, their removal is often crucial at a certain time point after translation. Here, we developed a new strategy to produce target proteins without foreign domains. This involved in vivo removal of foreign domains fused to the N-terminus by the small ubiquitin-related modifier (SUMO) domain/SUMO-specific protease system. This strategy was tested successfully by generating a recombinant gene, BiP:p38:bdSUMO : His:hLIF, that produced human leukemia inhibitory factor (hLIF) fused to p38, a coat protein of the Turnip crinkle virus; the inclusion of p38 increased levels of protein expression. The recombinant protein was expressed at high levels in the leaf tissue of Nicotiana benthamiana. Coexpression of bdSENP1, a SUMO-specific protease, proteolytically released His:hLIF from the full-length recombinant protein in the endoplasmic reticulum of N. benthamiana leaf cells. His:hLIF was purified from leaf extracts via Ni²⁺-NTA affinity purification resulting in a yield of 32.49 mg/kg, and the N-terminal 5-residues were verified by amino acid sequencing. Plant-produced His:hLIF was able to maintain the pluripotency of mouse embryonic stem cells. This technique thus provides a novel method of removing foreign domains from a target protein in planta.

Green Production and Biotechnological Applications of Cell Wall Lytic Enzymes

: Energy demand is constantly growing, and, nowadays, fossil fuels still play a dominant role in global energy production, despite their negative effects on air pollution and the emission of greenhouse gases, which are the main contributors to global warming. An alternative clean source of energy is represented by the lignocellulose fraction of plant cell walls, the most abundant carbon source on Earth. To obtain biofuels, lignocellulose must be efficiently converted into fermentable sugars. In this regard, the exploitation of cell wall lytic enzymes (CWLEs) produced by lignocellulolytic fungi and bacteria may be considered as an eco-friendly alternative. These organisms evolved to produce a variety of highly specific CWLEs, even if in low amounts. For an industrial use, both the identification of novel CWLEs and the optimization of sustainable CWLE-expressing biofactories are crucial. In this review, we focus on recently reported advances in the heterologous expression of CWLEs from microbial and plant expression systems as well as some of their industrial applications, including the production of biofuels from agricultural feedstock and of value-added compounds from waste materials. Moreover, since heterologous expression of CWLEs may be toxic to plant hosts, genetic strategies aimed in converting such a deleterious effect into a beneficial trait are discussed.

[Preparation and characterization of a new mutant homolog of chemotaxis protein CheY from anaerobic hyperthermophilic microorganism Thermotoga naphthophila]

Using genetic engineering methods the expression vectors structures have been designed to produce recombinant proteins TnaCheY and Tna CheY-mut, the homologues of the chemotaxis protein CheY from the hyperthermophilic organism Thermotoga naphthophila in Escherichia coli BL21(DE3) cells. The cultivation conditions of transformed strains were optimized. The influence of episomal expression of the heterologous chemotaxis protein CheY on growth kinetics parameters of the culture of mesophilic bacteria E. coli was studied. The optimal purification flowchart of the obtained proteins using thermolysis is proposed. Using the E. coli BL21(DE3) laboratory strain as an example, the possibility of employment the episomal expression of such proteins to control the cultivation and production time of pharmaceutically and industrially valuable metabolites due to the impact on some stages of the bacterial chemotaxis is experimentally proved.

Construction of a trifunctional cellulase and expression in Saccharomyces cerevisiae using a fusion protein

Background

Cellulose is the most important component of lignocellulose, and its degradation requires three different types of enzymes to act synergistically. There have been reports of single gene duality, but no gene has been described to have more than two functions. Cloning and expression of fusion cellulases containing more than two kinds of catalytic domains has not been reported thus far.

Results

We synthesized three different cellulase genes and linked the three catalytic domains with a (G₄S)₃ flexible linker. The trifunctional cellulase gene (BCE) containing three types of cellulase functions was constructed and expressed in S. cerevisiae successfully. The β-glucosidase, the exoglucanase and the endoglucanase activity of the trifunctional cellulase BCE reached 16.80 IU/mg, 2.26 IU/mg and 20.67 IU/mg, which was 46.27, 6.73 and 46.20% higher than the activities of the β-glucosidase BG, the endoglucanase CBH and the endoglucanase EG. The filter paper enzyme activity of BCE was higher than those of BG, CBH and EG, reached 2.04 IU/mg.

Conclusions

The trifunctional cellulase BCE was designed based on β-glucosidase BG, endoglucanase EG and exoglucanase CBH, and it possessed β-glucosidase activity, endoglucanase activity and exoglucanase activity simultaneously. The BCE has better filter paper activity, it means the potential practical application.

Electronic supplementary material

The online version of this article (10.1186/s12896-018-0454-x) contains supplementary material, which is available to authorized users.

[Construction and characterization of a recombinant mutant homolog of the CheW protein from Thermotoga petrophila RKU-1]

In the work a recombinant chemotaxis protein CheW from Thermotoga petrophila RKU-1 (TpeCheW) and its mutant homolog (TpeCheW-mut) were created. It was shown that, despite the low homology with CheW prototypes from intestinal bacteria, these proteins didn't cause metabolic overload and were well expressed by cells of E. coli laboratory strains. We have discovered a broad spectrum of industrial valuable properties of the TpeCheW-mut protein such as stability in a wide range of temperatures and pH, high expression level, solubility and possibility of the application of a simple low-stage purification methodology with the use of preliminary heat treatment. Possible directions of the scientific and industrial application of this protein were claimed.

Purification of a recombinant protein with cellulose-binding module 3 as the affinity tag

Easy-to-perform and low-cost protein purification methods are in high demand for the mass production of commonly used enzymes that play an important role in bioeconomy. A low-cost and rapid recombinant protein purification system was developed using CBM3 (family 3 cellulose-binding module) as affinity tag. This protocol describes the purification of CBM3-fusion protein and tag-free protein expressed in Pichia pastoris using CBM3 as an affinity tag.

Challenges and advances in the heterologous expression of cellulolytic enzymes: a review

Second generation biofuel development is increasingly reliant on the recombinant expression of cellulases. Designing or identifying successful expression systems is thus of preeminent importance to industrial progress in the field. Recombinant production of cellulases has been performed using a wide range of expression systems in bacteria, yeasts and plants. In a number of these systems, particularly when using bacteria and plants, significant challenges have been experienced in expressing full-length proteins or proteins at high yield. Further difficulties have been encountered in designing recombinant systems for surface-display of cellulases and for use in consolidated bioprocessing in bacteria and yeast. For establishing cellulase expression in plants, various strategies are utilized to overcome problems, such as the auto-hydrolysis of developing plant cell walls. In this review, we investigate the major challenges, as well as the major advances made to date in the recombinant expression of cellulases across the commonly used bacterial, plant and yeast systems. We review some of the critical aspects to be considered for industrial-scale cellulase production.

Efficiency and stability enhancement of cis-epoxysuccinic acid hydrolase by fusion with a carbohydrate binding module and immobilization onto cellulose

Cis-epoxysuccinic acid hydrolase (CESH) is an enzyme that catalyzes cis-epoxysuccinic acid to produce enantiomeric L(+)-tartaric acid. The production of tartaric acid by using CESH would be valuable in the chemical industry because of its high yield and selectivity, but the low stability of CESH hampers its application. To improve the stability of CESH, we fused five different carbohydrate-binding modules (CBMs) to CESH and immobilized the chimeric enzymes on cellulose. The effects of the fusion and immobilization on the activity, kinetics, and stability of CESH were compared. Activity measurements demonstrated that the fusion with CBMs and the immobilization on cellulose increased the pH and temperature adaptability of CESH. The chimeric enzymes showed significantly different enzyme kinetics parameters, among which the immobilized CBM30-CESH exhibited twofold catalytic efficiency compared with the native CESH. The half-life measurements indicated that the stability of the enzyme in its free form was slightly increased by the fusion with CBMs, whereas the immobilization on cellulose significantly increased the stability of the enzyme. The immobilized CBM30-CESH showed the longest half-life, which is more than five times the free native CESH half-life at 30 °C. Therefore, most CBMs can improve enzymatic properties, and CBM30 is the best fusion partner for CESH to improve both its enzymatic efficiency and its stability.

Heterologous expression of plant cell wall degrading enzymes for effective production of cellulosic biofuels

A major technical challenge in the cost-effective production of cellulosic biofuel is the need to lower the cost of plant cell wall degrading enzymes (PCDE), which is required for the production of sugars from biomass. Several competitive, low-cost technologies have been developed to produce PCDE in different host organisms such as Escherichia coli, Zymomonas mobilis, and plant. Selection of an ideal host organism is very important, because each host organism has its own unique features. Synthetic biology-aided tools enable heterologous expression of PCDE in recombinant E. coli or Z. mobilis and allow successful consolidated bioprocessing (CBP) in these microorganisms. In-planta expression provides an opportunity to simplify the process of enzyme production and plant biomass processing and leads to self-deconstruction of plant cell walls. Although the future of currently available technologies is difficult to predict, a complete and viable platform will most likely be available through the integration of the existing approaches with the development of breakthrough technologies.

Engineering the cell surface display of cohesins for assembly of cellulosome-inspired enzyme complexes on Lactococcus lactis

BACKGROUND

The assembly and spatial organization of enzymes in naturally occurring multi-protein complexes is of paramount importance for the efficient degradation of complex polymers and biosynthesis of valuable products. The degradation of cellulose into fermentable sugars by Clostridium thermocellum is achieved by means of a multi-protein "cellulosome" complex. Assembled via dockerin-cohesin interactions, the cellulosome is associated with the cell surface during cellulose hydrolysis, forming ternary cellulose-enzyme-microbe complexes for enhanced activity and synergy. The assembly of recombinant cell surface displayed cellulosome-inspired complexes in surrogate microbes is highly desirable. The model organism Lactococcus lactis is of particular interest as it has been metabolically engineered to produce a variety of commodity chemicals including lactic acid and bioactive compounds, and can efficiently secrete an array of recombinant proteins and enzymes of varying sizes.

RESULTS

Fragments of the scaffoldin protein CipA were functionally displayed on the cell surface of Lactococcus lactis. Scaffolds were engineered to contain a single cohesin module, two cohesin modules, one cohesin and a cellulose-binding module, or only a cellulose-binding module. Cell toxicity from over-expression of the proteins was circumvented by use of the nisA inducible promoter, and incorporation of the C-terminal anchor motif of the streptococcal M6 protein resulted in the successful surface-display of the scaffolds. The facilitated detection of successfully secreted scaffolds was achieved by fusion with the export-specific reporter staphylococcal nuclease (NucA). Scaffolds retained their ability to associate in vivo with an engineered hybrid reporter enzyme, E. coli β-glucuronidase fused to the type 1 dockerin motif of the cellulosomal enzyme CelS. Surface-anchored complexes exhibited dual enzyme activities (nuclease and β-glucuronidase), and were displayed with efficiencies approaching 104 complexes/cell.

CONCLUSIONS

We report the successful display of cellulosome-inspired recombinant complexes on the surface of Lactococcus lactis. Significant differences in display efficiency among constructs were observed and attributed to their structural characteristics including protein conformation and solubility, scaffold size, and the inclusion and exclusion of non-cohesin modules. The surface-display of functional scaffold proteins described here represents a key step in the development of recombinant microorganisms capable of carrying out a variety of metabolic processes including the direct conversion of cellulosic substrates into fuels and chemicals.

Engineering of Clostridium phytofermentans Endoglucanase Cel5A for improved thermostability

A family 5 glycoside hydrolase from Clostridium phytofermentans was cloned and engineered through a cellulase cell surface display system in Escherichia coli. The presence of cell surface anchoring, a cellulose binding module, or a His tag greatly influenced the activities of wild-type and mutant enzymes on soluble and solid cellulosic substrates, suggesting the high complexity of cellulase engineering. The best mutant had 92%, 36%, and 46% longer half-lives at 60 degrees C on carboxymethyl cellulose, regenerated amorphous cellulose, and Avicel, respectively.

Overexpression and simple purification of the Thermotoga maritima 6-phosphogluconate dehydrogenase in Escherichia coli and its application for NADPH regeneration

Background

Thermostable enzymes from thermophilic microorganisms are playing more and more important roles in molecular biology R&D and industrial applications. However, over-production of recombinant soluble proteins from thermophilic microorganisms in mesophilic hosts (e.g. E. coli) remains challenging sometimes.

Results

An open reading frame TM0438 from a hyperthermophilic bacterium Thermotoga maritima putatively encoding 6-phosphogluconate dehydrogenase (6PGDH) was cloned and expressed in E. coli. The purified protein was confirmed to have 6PGDH activity with a molecular mass of 53 kDa. The k_cat of this enzyme was 325 s^-1 and the K_m values for 6-phosphogluconate, NADP⁺, and NAD⁺ were 11, 10 and 380 μM, respectively, at 80°C. This enzyme had half-life times of 48 and 140 h at 90 and 80°C, respectively. Through numerous approaches including expression vectors, hosts, cultivation conditions, inducers, and codon-optimization of the 6pgdh gene, the soluble 6PGDH expression levels were enhanced to ~250 mg per liter of culture by more than 500-fold. The recombinant 6PGDH accounted for >30% of total E. coli cellular proteins when lactose was used as a low-cost inducer. In addition, this enzyme coupled with glucose-6-phosphate dehydrogenase for the first time was demonstrated to generate two moles of NADPH per mole of glucose-6-phosphate.

Conclusion

We have achieved a more than 500-fold improvement in the expression of soluble T. maritima 6PGDH in E. coli, characterized its basic biochemical properties, and demonstrated its applicability for NADPH regeneration by a new enzyme cocktail. The methodology for over-expression and simple purification of this thermostable protein would be useful for the production of other thermostable proteins in E. coli.

Novel families of toxin-like peptides in insects and mammals: a computational approach

Most animal toxins are short proteins that appear in venom and vary in sequence, structure and function. A common characteristic of many such toxins is their apparent structural stability. Sporadic instances of endogenous toxin-like proteins that function in non-venom context have been reported. We have utilized machine learning methodology, based on sequence-derived features and guided by the notion of structural stability, in order to conduct a large-scale search for toxin and toxin-like proteins. Application of the method to insect and mammalian sequences revealed novel families of toxin-like proteins. One of these proteins shows significant similarity to ion channel inhibitors that are expressed in cone snail and assassin bug venom, and is surprisingly expressed in the bee brain. A toxicity assay in which the protein was injected to fish induced a strong yet reversible paralytic effect. We suggest that the protein may function as an endogenous modulator of voltage-gated Ca(2+) channels. Additionally, we have identified a novel mammalian cluster of toxin-like proteins that are expressed in the testis. We suggest that these proteins might be involved in regulation of nicotinic acetylcholine receptors that affect the acrosome reaction and sperm motility. Finally, we highlight a possible evolutionary link between venom toxins and antibacterial proteins. We expect our methodology to enhance the discovery of additional novel protein families.

Strategy for selecting and characterizing linker peptides for CBM9-tagged fusion proteins expressed inEscherichia coli

The influence of linker design on fusion protein production and performance was evaluated when a family 9 carbohydrate-binding module (CBM9) serves as the affinity tag for recombinant proteins expressed in Escherichia coli. Two bioinformatic strategies for linker design were applied: the first identifies naturally occurring linkers within the proteome of the host organism, the second involves screening peptidases and their known specificities using the bioinformatics software MEROPS to design an artificial linker resistant to proteolysis within the host. Linkers designed using these strategies were compared against traditional poly-glycine linkers. Although widely used, glycine-rich linkers were found by tandem MS data to be susceptible to hydrolysis by E. coli peptidases. The natural (PT)(x)P and MEROPS-designed S(3)N(10) linkers were significantly more stable, indicating both strategies provide a useful approach to linker design. Factor X(a) processing of the fusion proteins depended strongly on linker chemistry, with poly(G) and S(3)N(10) linkers showing the fastest cleavage rates. Luminescence resonance energy transfer studies, used to measure average distance of separation between GFP and Tb(III) bound to a strong calcium-binding site of CBM9, revealed that, for a given linker chemistry, the separation distance increases with increasing linker length. This increase was particularly large for poly(G) linkers, suggesting that this linker chemistry adopts a hydrated, extended configuration that makes it particularly susceptible to proteolysis. Differential scanning calorimetry studies on the PT linker series showed that fusion of CBM9 to GFP did not alter the T(m) of GFP but did result in a destabilization, as seen by both a decrease in T(m) and DeltaH(cal), of CBM9. The degree of destabilization increased with decreasing length of the (PT)(x)P linker such that DeltaT(m) = -8.4 degrees C for the single P linker.

Cellulase, clostridia, and ethanol

Biomass conversion to ethanol as a liquid fuel by the thermophilic and anaerobic clostridia offers a potential partial solution to the problem of the world's dependence on petroleum for energy. Coculture of a cellulolytic strain and a saccharolytic strain of Clostridium on agricultural resources, as well as on urban and industrial cellulosic wastes, is a promising approach to an alternate energy source from an economic viewpoint. This review discusses the need for such a process, the cellulases of clostridia, their presence in extracellular complexes or organelles (the cellulosomes), the binding of the cellulosomes to cellulose and to the cell surface, cellulase genetics, regulation of their synthesis, cocultures, ethanol tolerance, and metabolic pathway engineering for maximizing ethanol yield.

Effects of the PT region of EngD and HLD of CbpA on solubility, catalytic activity and purification characteristics of EngD-CBDCbpA fusions from Clostridium cellulovorans

Chimeric proteins combining the catalytic N-terminal region of native EngD with its proline-threonine-threonine (PT) linker region, hydrophilic domain (HLD) and cellulose binding domain (CBD) of cellulose binding protein A (CbpA) from Clostridium cellulovorans were constructed, expressed, and analyzed. The chimeric proteins with CBD(CbpA) all demonstrated strong affinity to Avicel. The chimeric protein with the PT region of EngD and the HLD had the best catalytic activity and the highest estimated percentage of soluble protein amongst the chimeric proteins. Native EngD and two of the chimeric proteins (EngD-PT-HLD-CBD and EngD-CBD) were purified and their characteristics analyzed. Their binding affinities to Avicel as well as their enzymatic activities against various substrates were found to be consistent with the results we saw from protein lysate samples, which was good binding to Avicel but a decrease in solubility and catalytic activities in chimeric proteins without PT and/or HLD. The reasons for these are discussed. These fusion proteins may be important in applications, such as immobilization to solid cellulose substrate for purification of proteins and enrichment/aggregation of protein complexes.

Substrate-induced production and secretion of cellulases by Clostridium acetobutylicum

Clostridium acetobutylicum ATCC 824 is a solventogenic bacterium that grows heterotrophically on a variety of carbohydrates, including glucose, cellobiose, xylose, and lichenan, a linear polymer of beta-1,3- and beta-1,4-linked beta-D-glucose units. C. acetobutylicum does not degrade cellulose, although its genome sequence contains several cellulase-encoding genes and a complete cellulosome cluster of cellulosome genes. In the present study, we demonstrate that a low but significant level of induction of cellulase activity occurs during growth on xylose or lichenan. The celF gene, located in the cellulosome-like gene cluster and coding for a unique cellulase that belongs to glycoside hydrolase family 48, was cloned in Escherichia coli, and antibodies were raised against the overproduced CelF protein. A Western blot analysis suggested a possible catabolite repression by glucose or cellobiose and an up-regulation by lichenan or xylose of the extracellular production of CelF by C. acetobutylicum. Possible reasons for the apparent inability of C. acetobutylicum to degrade cellulose are discussed.

Hydrophilic domains of scaffolding protein CbpA promote glycosyl hydrolase activity and localization of cellulosomes to the cell surface of Clostridium cellulovorans

CbpA, the scaffolding protein of Clostridium cellulovorans cellulosomes, possesses one family 3 cellulose binding domain, nine cohesin domains, and four hydrophilic domains (HLDs). Among the three types of domains, the function of the HLDs is still unknown. We proposed previously that the HLDs of CbpA play a role in attaching the cellulosome to the cell surface, since they showed some homology to the surface layer homology domains of EngE. Several recombinant proteins with HLDs (rHLDs) and recombinant EngE (rEngE) were examined to determine their binding to the C. cellulovorans cell wall fraction. Tandemly linked rHLDs showed higher affinity for the cell wall than individual rHLDs showed. EngE was shown to have a higher affinity for cell walls than rHLDs have. C. cellulovorans native cellulosomes were found to have higher affinity for cell walls than rHLDs have. When immunoblot analysis was carried out with the native cellulosome fraction bound to cell wall fragments, the presence of EngE was also confirmed, suggesting that the mechanism anchoring CbpA to the C. cellulovorans cell surface was mediated through EngE and that the HLDs play a secondary role in the attachment of the cellulosome to the cell surface. During a study of the role of HLDs on cellulose degradation, the mini-cellulosome complexes with HLDs degraded cellulose more efficiently than complexes without HLDs degraded cellulose. The rHLDs also showed binding affinity for crystalline cellulose and carboxymethyl cellulose. These results suggest that the CbpA HLDs play a major role and a minor role in C. cellulovorans cellulosomes. The primary role increases cellulose degradation activity by binding the cellulosome complex to the cellulose substrate; secondarily, HLDs aid the binding of the CbpA/cellulosome to the C. cellulovorans cell surface.