The targets of CAPRI rounds 20-27

Challenges of Protein-Protein Docking of the Membrane Proteins

Despite the recent advances in the determination of high-resolution membrane protein (MP) structures, the structural and functional characterization of MPs remains extremely challenging, mainly due to the hydrophobic nature, low abundance, poor expression, purification, and crystallization difficulties associated with MPs. Whereby the major challenges/hurdles for MP structure determination are associated with the expression, purification, and crystallization procedures. Although there have been significant advances in the experimental determination of MP structures, only a limited number of MP structures (approximately less than 1% of all) are available in the Protein Data Bank (PDB). Therefore, the structures of a large number of MPs still remain unresolved, which leads to the availability of widely unplumbed structural and functional information related to MPs. As a result, recent developments in the drug discovery realm and the significant biological contemplation have led to the development of several novel, low-cost, and time-efficient computational methods that overcome the limitations of experimental approaches, supplement experiments, and provide alternatives for the characterization of MPs. Whereby the fine tuning and optimizations of these computational approaches remains an ongoing endeavor.Computational methods offer a potential way for the elucidation of structural features and the augmentation of currently available MP information. However, the use of computational modeling can be extremely challenging for MPs mainly due to insufficient knowledge of (or gaps in) atomic structures of MPs. Despite the availability of numerous in silico methods for 3D structure determination the applicability of these methods to MPs remains relatively low since all methods are not well-suited or adequate for MPs. However, sophisticated methods for MP structure predictions are constantly being developed and updated to integrate the modifications required for MPs. Currently, different computational methods for (1) MP structure prediction, (2) stability analysis of MPs through molecular dynamics simulations, (3) modeling of MP complexes through docking, (4) prediction of interactions between MPs, and (5) MP interactions with its soluble partner are extensively used. Towards this end, MP docking is widely used. It is notable that the MP docking methods yet few in number might show greater potential in terms of filling the knowledge gap. In this chapter, MP docking methods and associated challenges have been reviewed to improve the applicability, accuracy, and the ability to model macromolecular complexes.

Protein Docking Model Evaluation by Graph Neural Networks

Physical interactions of proteins play key functional roles in many important cellular processes. To understand molecular mechanisms of such functions, it is crucial to determine the structure of protein complexes. To complement experimental approaches, which usually take a considerable amount of time and resources, various computational methods have been developed for predicting the structures of protein complexes. In computational modeling, one of the challenges is to identify near-native structures from a large pool of generated models. Here, we developed a deep learning-based approach named Graph Neural Network-based DOcking decoy eValuation scorE (GNN-DOVE). To evaluate a protein docking model, GNN-DOVE extracts the interface area and represents it as a graph. The chemical properties of atoms and the inter-atom distances are used as features of nodes and edges in the graph, respectively. GNN-DOVE was trained, validated, and tested on docking models in the Dockground database and further tested on a combined dataset of Dockground and ZDOCK benchmark as well as a CAPRI scoring dataset. GNN-DOVE performed better than existing methods, including DOVE, which is our previous development that uses a convolutional neural network on voxelized structure models.

SWISS-MODEL: homology modelling of protein structures and complexes

Homology modelling has matured into an important technique in structural biology, significantly contributing to narrowing the gap between known protein sequences and experimentally determined structures. Fully automated workflows and servers simplify and streamline the homology modelling process, also allowing users without a specific computational expertise to generate reliable protein models and have easy access to modelling results, their visualization and interpretation. Here, we present an update to the SWISS-MODEL server, which pioneered the field of automated modelling 25 years ago and been continuously further developed. Recently, its functionality has been extended to the modelling of homo- and heteromeric complexes. Starting from the amino acid sequences of the interacting proteins, both the stoichiometry and the overall structure of the complex are inferred by homology modelling. Other major improvements include the implementation of a new modelling engine, ProMod3 and the introduction a new local model quality estimation method, QMEANDisCo. SWISS-MODEL is freely available at https://swissmodel.expasy.org.

Protein-Protein Docking

Protein-protein docking algorithms are powerful computational tools, capable of analyzing the protein-protein interactions at the atomic-level. In this chapter, we will review the theoretical concepts behind different protein-protein docking algorithms, highlighting their strengths as well as their limitations and pointing to important case studies for each method. The methods we intend to cover in this chapter include various search strategies and scoring techniques. This includes exhaustive global search, fast Fourier transform search, spherical Fourier transform-based search, direct search in Cartesian space, local shape feature matching, geometric hashing, genetic algorithm, randomized search, and Monte Carlo search. We will also discuss the different ways that have been used to incorporate protein flexibility within the docking procedure and some other future directions in this field, suggesting possible ways to improve the different methods.

Predicting protein conformational changes for unbound and homology docking: learning from intrinsic and induced flexibility

Predicting protein conformational changes from unbound structures or even homology models to bound structures remains a critical challenge for protein docking. Here we present a study directly addressing the challenge by reducing the dimensionality and narrowing the range of the corresponding conformational space. The study builds on cNMA-our new framework of partner- and contact-specific normal mode analysis that exploits encounter complexes and considers both intrinsic and induced flexibility. First, we established over a CAPRI (Critical Assessment of PRedicted Interactions) target set that the direction of conformational changes from unbound structures and homology models can be reproduced to a great extent by a small set of cNMA modes. In particular, homology-to-bound interface root-mean-square deviation (iRMSD) can be reduced by 40% on average with the slowest 30 modes. Second, we developed novel and interpretable features from cNMA and used various machine learning approaches to predict the extent of conformational changes. The models learned from a set of unbound-to-bound conformational changes could predict the actual extent of iRMSD with errors around 0.6 Å for unbound proteins in a held-out benchmark subset, around 0.8 Å for unbound proteins in the CAPRI set, and around 1 Å even for homology models in the CAPRI set. Our results shed new insights into origins of conformational differences between homology models and bound structures and provide new support for the low-dimensionality of conformational adjustment during protein associations. The results also provide new tools for ensemble generation and conformational sampling in unbound and homology docking. Proteins 2017; 85:544-556. © 2016 Wiley Periodicals, Inc.

Residue-centric modeling and design of saccharide and glycoconjugate structures

The RosettaCarbohydrate framework is a new tool for modeling a wide variety of saccharide and glycoconjugate structures. This report describes the development of the framework and highlights its applications. The framework integrates with established protocols within the Rosetta modeling and design suite, and it handles the vast complexity and variety of carbohydrate molecules, including branching and sugar modifications. To address challenges of sampling and scoring, RosettaCarbohydrate can sample glycosidic bonds, side-chain conformations, and ring forms, and it utilizes a glycan-specific term within its scoring function. Rosetta can work with standard PDB, GLYCAM, and GlycoWorkbench (.gws) file formats. Saccharide residue-specific chemical information is stored internally, permitting glycoengineering and design. Carbohydrate-specific applications described herein include virtual glycosylation, loop-modeling of carbohydrates, and docking of glyco-ligands to antibodies. Benchmarking data are presented and compared to other studies, demonstrating Rosetta's ability to predict glyco-ligand binding. The framework expands the tools available to glycoscientists and engineers. © 2016 Wiley Periodicals, Inc.

Addressing the Role of Conformational Diversity in Protein Structure Prediction

Computational modeling of tertiary structures has become of standard use to study proteins that lack experimental characterization. Unfortunately, 3D structure prediction methods and model quality assessment programs often overlook that an ensemble of conformers in equilibrium populates the native state of proteins. In this work we collected sets of publicly available protein models and the corresponding target structures experimentally solved and studied how they describe the conformational diversity of the protein. For each protein, we assessed the quality of the models against known conformers by several standard measures and identified those models ranked best. We found that model rankings are defined by both the selected target conformer and the similarity measure used. 70% of the proteins in our datasets show that different models are structurally closest to different conformers of the same protein target. We observed that model building protocols such as template-based or ab initio approaches describe in similar ways the conformational diversity of the protein, although for template-based methods this description may depend on the sequence similarity between target and template sequences. Taken together, our results support the idea that protein structure modeling could help to identify members of the native ensemble, highlight the importance of considering conformational diversity in protein 3D quality evaluations and endorse the study of the variability of the native structure for a meaningful biological analysis.

Improvements, trends, and new ideas in molecular docking: 2012-2013 in review

Molecular docking is a computational method for predicting the placement of ligands in the binding sites of their receptor(s). In this review, we discuss the methodological developments that occurred in the docking field in 2012 and 2013, with a particular focus on the more difficult aspects of this computational discipline. The main challenges and therefore focal points for developments in docking, covered in this review, are receptor flexibility, solvation, scoring, and virtual screening. We specifically deal with such aspects of molecular docking and its applications as selection criteria for constructing receptor ensembles, target dependence of scoring functions, integration of higher-level theory into scoring, implicit and explicit handling of solvation in the binding process, and comparison and evaluation of docking and scoring methods.

Structural basis of protein-protein interactions

Regulated interactions between proteins govern signaling pathways within and between cells. Structural studies on protein complexes formed reversibly and/or transiently illustrate the remarkable diversity of interactions, both in terms of interfacial size and nature. In recent years, "domain-peptide" interactions have gained much greater recognition and may be viewed as both pre-translational and posttranslational-dependent functional switches. Our understanding of the multistep regulation of auto-inhibited multidomain proteins has also grown. Their activity may be understood as the "combinatorial" output of multiple input signals, including phosphorylation, location, and mechanical force. The prospects for bridging the gap between the new "systems biology" data and the traditional "reductionist" data are also discussed.

Information-driven structural modelling of protein-protein interactions

Protein-protein docking aims at predicting the three-dimensional structure of a protein complex starting from the free forms of the individual partners. As assessed in the CAPRI community-wide experiment, the most successful docking algorithms combine pure laws of physics with information derived from various experimental or bioinformatics sources. Of these so-called "information-driven" approaches, HADDOCK stands out as one of the most successful representatives. In this chapter, we briefly summarize which experimental information can be used to drive the docking prediction in HADDOCK, and then focus on the docking protocol itself. We discuss and illustrate with a tutorial example a "classical" protein-protein docking prediction, as well as more recent developments for modelling multi-body systems and large conformational changes.

Protein-protein docking with dynamic residue protonation states

Protein-protein interactions depend on a host of environmental factors. Local pH conditions influence the interactions through the protonation states of the ionizable residues that can change upon binding. In this work, we present a pH-sensitive docking approach, pHDock, that can sample side-chain protonation states of five ionizable residues (Asp, Glu, His, Tyr, Lys) on-the-fly during the docking simulation. pHDock produces successful local docking funnels in approximately half (79/161) the protein complexes, including 19 cases where standard RosettaDock fails. pHDock also performs better than the two control cases comprising docking at pH 7.0 or using fixed, predetermined protonation states. On average, the top-ranked pHDock structures have lower interface RMSDs and recover more native interface residue-residue contacts and hydrogen bonds compared to RosettaDock. Addition of backbone flexibility using a computationally-generated conformational ensemble further improves native contact and hydrogen bond recovery in the top-ranked structures. Although pHDock is designed to improve docking, it also successfully predicts a large pH-dependent binding affinity change in the Fc–FcRn complex, suggesting that it can be exploited to improve affinity predictions. The approaches in the study contribute to the goal of structural simulations of whole-cell protein-protein interactions including all the environmental factors, and they can be further expanded for pH-sensitive protein design.

Protein-protein interactions are fundamental for biological function and are strongly influenced by their local environment. Cellular pH is tightly controlled and is one of the critical environmental factors that regulates protein-protein interactions. Three-dimensional structures of the protein complexes can help us understand the mechanism of the interactions. Since experimental determination of the structures of protein-protein complexes is expensive and time-consuming, computational docking algorithms are helpful to predict the structures. However, none of the current protein-protein docking algorithms account for the critical environmental pH effects. So we developed a pH-sensitive docking algorithm that can dynamically pick the favorable protonation states of the ionizable amino-acid residues. Compared to our previous standard docking algorithm, the new algorithm improves docking accuracy and generates higher-quality predictions over a large dataset of protein-protein complexes. We also use a case study to demonstrate efficacy of the algorithm in predicting a large pH-dependent binding affinity change that cannot be captured by the other methods that neglect pH effects. In principle, the approaches in the study can be used for rational design of pH-dependent protein inhibitors or industrial enzymes that are active over a wide range of pH values.

Prediction and redesign of protein-protein interactions

Understanding the molecular basis of protein function remains a central goal of biology, with the hope to elucidate the role of human genes in health and in disease, and to rationally design therapies through targeted molecular perturbations. We review here some of the computational techniques and resources available for characterizing a critical aspect of protein function - those mediated by protein-protein interactions (PPI). We describe several applications and recent successes of the Evolutionary Trace (ET) in identifying molecular events and shapes that underlie protein function and specificity in both eukaryotes and prokaryotes. ET is a part of analytical approaches based on the successes and failures of evolution that enable the rational control of PPI.

Modeling protein-protein complexes using the HADDOCK webserver "modeling protein complexes with HADDOCK"

Protein-protein interactions lie at the heart of most cellular processes. Determining their high-resolution structures by experimental methods is a nontrivial task, which is why complementary computational approaches have been developed over the years. To gain structural and dynamical insight on an atomic scale in these interactions, computational modeling must often be complemented by low-resolution experimental information. For this purpose, we developed the user-friendly HADDOCK webserver, the interface to our biomolecular docking program, which can make use of a variety of low-resolution data to drive the docking process. In this chapter, we explain the use of the HADDOCK webserver based on the real-life Lys48-linked di-ubiquitin case, which led to the 2BGF PDB model. We demonstrate the use of chemical shift perturbation data in combination with residual dipolar couplings and further highlight a few other cases where our software was successfully used. The HADDOCK webserver is available to the science community for free at haddock.science.uu.nl/services/HADDOCK.