Measurement of pesticide residues in peppers by near-infrared reflectance spectroscopy

Advances, limitations, and considerations on the use of vibrational spectroscopy towards the development of management decision tools in food safety

Food safety and food security are two of the main concerns for the modern food manufacturing industry. Disruptions in the food supply and value chains have created the need to develop agile screening tools that will allow the detection of food pathogens, spoilage microorganisms, microbial contaminants, toxins, herbicides, and pesticides in agricultural commodities, natural products, and food ingredients. Most of the current routine analytical methods used to detect and identify microorganisms, herbicides, and pesticides in food ingredients and products are based on the use of reliable and robust immunological, microbiological, and biochemical techniques (e.g. antigen-antibody interactions, extraction and analysis of DNA) and chemical methods (e.g. chromatography). However, the food manufacturing industries are demanding agile and affordable analytical methods. The objective of this review is to highlight the advantages and limitations of the use of vibrational spectroscopy combined with chemometrics as proxy to evaluate and quantify herbicides, pesticides, and toxins in foods.

Evaluation of convolutional neural network for non-destructive detection of imidacloprid and acetamiprid residues in chili pepper (Capsicum frutescens L.) based on visible near-infrared spectroscopy

Consumption of agricultural products with pesticide residue is risky and can negatively affect health. This study proposed a nondestructive method of detecting pesticide residues in chili pepper based on the combination of visible and near-infrared (VIS/NIR) spectroscopy (400-2498 nm) and deep learning modeling. The obtained spectra of chili peppers with two types of pesticide residues (acetamiprid and imidacloprid) were analyzed using a one-dimensional convolutional neural network (1D-CNN). Compared with the commonly used partial least squares regression model, the 1D-CNN approach yielded higher prediction accuracy, with a root mean square error of calibration of 0.23 and 0.28 mg/kg and a root mean square error of prediction of 0.55 and 0.49 mg/kg for the acetamiprid and imidacloprid data sets, respectively. Overall, the results indicate that the combination of the 1D-CNN model and VIS/NIR spectroscopy is a promising nondestructive method of identifying pesticide residues in chili pepper.

Non-destructive detection and recognition of pesticide residue levels on cauliflowers using visible/near-infrared spectroscopy combined with chemometrics

In this study, two prediction models were developed using visible/near-infrared (Vis/NIR) spectroscopy combined with partial least squares discriminant analysis (PLS-DA) and least squares support vector machine (LS-SVM) for the detection of pesticide residues of avermectin, dichlorvos, and chlorothalonil at different concentration levels on the surface of cauliflowers. Five samples of each of the three different types of pesticide were prepared at different concentrations and sprayed in groups on the surface of the corresponding cauliflower samples. Utilizing the spectral data collected in the Vis/NIR as input values, comparison and analysis of preprocessed spectral data, and regression coefficient (RC), successive projections algorithm (SPA), and competitive adaptive reweighted sampling (CARS) were used in turn to downscale the data to select the main feature wavelengths, and PLS-DA and LS-SVM models were built for comparison. The results showed that the RC-LS-SVM was the best discriminant model for detecting avermectin residues concentration on the surface of cauliflowers, with a prediction set discriminant accuracy of 98.33%. For detecting different concentrations of dichlorvos, the SPA-LS-SVM had the best predictive accuracy of 95%. The accuracy of the model based on CARS-PLS-DA to identify chlorothalonil at different concentration levels on cauliflower surfaces reached 93.33%. The results demonstrated that the Vis/NIR spectroscopy combined with chemometrics could quickly and effectively identify pesticide residues on cauliflower surfaces, affording a certain reference for the rapid recognition of different pesticide residue concentrations on cauliflower surfaces. PRACTICAL APPLICATION: Vis/NIR spectroscopy can detect the concentration levels of pesticide residues on the surface of cauliflowers and help food regulators quickly and non-destructively detect traces of pesticides in food, providing a guarantee for food safety. The technique also provides a basis for determining pesticide residue concentrations on the surface of other vegetables.

Screening for pesticide residues in cocoa (Theobroma cacao L.) by portable infrared spectroscopy

Rapid assessment of pesticide residues ensures cocoa bean quality and marketability. In this study, a portable FTIR instrument equipped with a triple reflection attenuated total reflectance (ATR) accessory was used to screen cocoa beans for pesticide residues. Cocoa beans (n = 75) were obtained from major cocoa growing regions of Peru and were quantified for pesticides by gas chromatography (GC) or liquid chromatography (LC) coupled with mass spectrometry (MS). The FTIR spectra were used to detect the presence of pesticides in cocoa beans or lipid fraction (butter) by using a pattern recognition (Soft Independent Modeling by Class Analogy, SIMCA) algorithm, which produced a significant discrimination for cocoa nibs (free or with pesticides). The variables related to the class grouping were assigned to the aliphatic (3200-2800 cm^-1) region with an interclass distance (ICD) of 3.3. Subsequently, the concentration of pesticides in cocoa beans was predicted using a partial least squares regression analysis (PLSR), using an internal validation of the PLRS model, the cross-validation correlation coefficient (R_val = 0.954) and the cross-validation standard error (SECV = 14.9 mg/kg) were obtained. Additionally, an external validation was performed, obtaining the prediction correlation coefficient (R_pre = 0.940) and the standard error of prediction (SEP = 16.0 μg/kg) with high statistical performances, which demonstrates the excellent predictability of the PLSR model in a similar real application. The developed FTIR method presented limits of detection and quantification (LOD = 9.8 μg/kg; LOQ = 23.1 μg/kg) with four optimum factors (PC). Mid-infrared spectroscopy (MIR) offered a viable alternative for field screening of cocoa.

Identification and Characterization of the Isomeric Impurity of the Fungicide "Cyazofamid"

Identification and characterization of biproducts/ impurities present in agrochemicals are critical in view of their efficacy and safety towards public health. We herein present our study on identification and characterization of an impurity, 5-chloro-2-cyano-N,N-dimethyl-4-p-tolylimidazole-1-sulfonamide (2) present in the fungicide, "cyazofamid". Intermittent HPLC analysis of the reaction of substituted imidazole (1) with N,N-dimethylsulfamoyl chloride suggested that 2 is formed during the reaction. Isolation by preparative HPLC and characterization by NMR, LC/HRMS, MS/MS and single crystal XRD analysis confirmed 2 as an isomer of cyazofamid, wherein the N,N-dimethyl sulfonamide group was positioned on the other nitrogen of imidazole in close proximity to chloride group. Computational studies further supported the formation of 2 and ruled out the other possible isomeric structures.

Nondestructive Detection of Pesticide Residue (Chlorpyrifos) on Bok Choi (Brassica rapa subsp. Chinensis) Using a Portable NIR Spectrometer Coupled with a Machine Learning Approach

The contamination of agricultural products, such as vegetables, by pesticide residues has received considerable attention worldwide. Pesticide residue on vegetables constitutes a potential risk to human health. In this study, we combined near infrared (NIR) spectroscopy with machine learning algorithms, including partial least-squares discrimination analysis (PLS-DA), support vector machine (SVM), artificial neural network (ANN), and principal component artificial neural network (PC-ANN), to identify pesticide residue (chlorpyrifos) on bok choi. The experimental set comprised 120 bok choi samples obtained from two small greenhouses that were cultivated separately. We performed pesticide and pesticide-free treatments with 60 samples in each group. The vegetables for pesticide treatment were fortified with 2 mL/L of chlorpyrifos 40% EC residue. We connected a commercial portable NIR spectrometer with a wavelength range of 908-1676 nm to a small single-board computer. We analyzed the pesticide residue on bok choi using UV spectrophotometry. The most accurate model correctly classified 100% of the samples used in the calibration set in terms of the content of chlorpyrifos residue on samples using SVM and PC-ANN with raw data spectra. Thus, we tested the model using an unknown dataset of 40 samples to verify the robustness of the model, which produced a satisfactory F1-score (100%). We concluded that the proposed portable NIR spectrometer coupled with machine learning approaches (PLS-DA, SVM, and PC-ANN) is appropriate for the detection of chlorpyrifos residue on bok choi.

The application of rapid test paper technology for pesticide detection in horticulture crops: a comprehensive review

Background

The ever increasing pests and diseases occurring during vegetable crop production is a challenge for agronomists and farmers. One of the practices to avoid or control the attack of the causal agents is the use of pesticides, including herbicides, insecticides nematicides, and molluscicides. However, the use of these products can result in the presence of harmful residues in horticultural crops, which cause several human diseases such as weakened immunity, splenomegaly, renal failure, hepatitis, respiratory diseases, and cancer. Therefore, it was necessary to find safe and effective techniques to detect these residues in horticultural crops and to monitor food security.

Main body

The review discusses the use of conventional methods to detect pesticide residues on horticultural crops, explain the sensitivity of nanoparticle markers to detect a variety of pesticides, discuss the different methods of rapid test paper technology and highlight recent research on rapid test paper detection of pesticides.

Conclusions

The methodologies discussed in the current review can be used in a certain situation, and the variety of methods enable detection of different types of pesticides in the environment. Notably, the highly sensitive immunoassay, which offers the advantages of being low cost, highly specific and sensitive, allows it to be integrated into many detection fields to accurately detect pesticides.

Detection of Profenofos in Chinese Kale, Cabbage, and Chili Spur Pepper Using Fourier Transform Near-Infrared and Fourier Transform Mid-Infrared Spectroscopies

Different types of quantitative technology based on infrared spectroscopy to detect profenofos were compared based on Fourier transform near-infrared (FT-NIR; 12,500-4000 cm^-1) and Fourier transform mid-infrared (FT-MIR; 4000-400 cm^-1) spectroscopies. Standard solutions in the range of 0.1-100 mg/L combined with the dry-extract system for infrared (DESIR) technique were analyzed. Based on partial least-squares regression (PLSR) to develop a calibration equation, FT-NIR-PLSR produced the best prediction of profenofos residues based on the values for R ² (0.87), standard error of prediction or SEP (11.68 mg/L), root-mean-square error of prediction or RMSEP (11.50 mg/L), bias (-0.81 mg/L), and ratio performance to deviation or RPD (2.81). In addition, FT-MIR-PLSR produced the best prediction of profenofos residues based on the values for R ² (0.83), SEP (13.10 mg/L), RMSEP (13.00 mg/L), bias (1.46 mg/L), and RPD (2.49). Based on the ease of use and appropriate sample preparation, FT-NIR-PLSR combined with DESIR was chosen to detect profenofos in Chinese kale, cabbage, and chili spur pepper at concentrations of 0.53-106.28 mg/kg. The quick, easy, cheap, effective, rugged, and safe technique coupled with gas chromatography-mass spectrometry was used to obtain the actual values. The best FT-NIR-PLSR equation provided good profenofos detection in all vegetables based on values for R ² (0.88-0.97), SEP (5.27-11.07 mg/kg), RMSEP (5.25-11.00 mg/kg), bias (-1.39 to 1.30 mg/kg), and RPD (2.91-5.22). These statistics revealed no significant differences between the FT-NIR predicted values and actual values at a confidence interval of 95%, with agreeable results presented at pesticide residue levels over 30 mg/kg. FT-NIR spectroscopy combined with DESIR and PLSR should be considered as a promising screening method for pesticide detection in vegetables.

ASSURED Point-of-Need Food Safety Screening: A Critical Assessment of Portable Food Analyzers

Standard methods for chemical food safety testing in official laboratories rely largely on liquid or gas chromatography coupled with mass spectrometry. Although these methods are considered the gold standard for quantitative confirmatory analysis, they require sampling, transferring the samples to a central laboratory to be tested by highly trained personnel, and the use of expensive equipment. Therefore, there is an increasing demand for portable and handheld devices to provide rapid, efficient, and on-site screening of food contaminants. Recent technological advancements in the field include smartphone-based, microfluidic chip-based, and paper-based devices integrated with electrochemical and optical biosensing platforms. Furthermore, the potential application of portable mass spectrometers in food testing might bring the confirmatory analysis from the laboratory to the field in the future. Although such systems open new promising possibilities for portable food testing, few of these devices are commercially available. To understand why barriers remain, portable food analyzers reported in the literature over the last ten years were reviewed. To this end, the analytical performance of these devices and the extent they match the World Health Organization benchmark for diagnostic tests, i.e., the Affordable, Sensitive, Specific, User-friendly, Rapid and Robust, Equipment-free, and Deliverable to end-users (ASSURED) criteria, was evaluated critically. A five-star scoring system was used to assess their potential to be implemented as food safety testing systems. The main findings highlight the need for concentrated efforts towards combining the best features of different technologies, to bridge technological gaps and meet commercialization requirements.

Evaluation of Different Models for Non-Destructive Detection of Tomato Pesticide Residues Based on Near-Infrared Spectroscopy

In this study, the possibility of non-destructive detection of tomato pesticide residues was investigated using Vis/NIRS and prediction models such as PLSR and ANN. First, Vis/NIR spectral data from 180 samples of non-pesticide tomatoes (used as a control treatment) and samples impregnated with pesticide with a concentration of 2 L per 1000 L between 350-1100 nm were recorded by a spectroradiometer. Then, they were divided into two parts: Calibration data (70%) and prediction data (30%). Next, the prediction performance of PLSR and ANN models after processing was compared with 10 spectral preprocessing methods. Spectral data obtained from spectroscopy were used as input and pesticide values obtained by gas chromatography method were used as output data. Data dimension reduction methods (principal component analysis (PCA), Random frog (RF), and Successive prediction algorithm (SPA)) were used to select the number of main variables. According to the values obtained for root-mean-square error (RMSE) and correlation coefficient (R) of the calibration and prediction data, it was found that the combined model SPA-ANN has the best performance (RC = 0.988, RP = 0.982, RMSEC = 0.141, RMSEP = 0.166). The investigational consequences obtained can be a reference for the development of internal content of agricultural products, based on NIR spectroscopy.

A review on the application of spectroscopy to the condiments detection: from safety to authenticity

Condiments are the magical ingredients that make the food present a richer taste. In recent years, due to the increasing consciousness of food safety and human health, much progress has been made in developing rapid and nondestructive techniques for the evaluation of food condiments safety, authentication, and traceability. The potential of spectroscopy techniques, such as near-infrared (NIR), mid-infrared (MIR), Raman, fluorescence, inductively coupled plasma (ICP), and hyperspectral imaging techniques, has been widely enhanced by numerous applications in this field because of their advantages over other analytical techniques. Following a brief introduction of condiment and safety basics, this review mainly focuses on recent vibrational and atomic spectral applications for condiment nondestructive analysis and evaluation, including (1) chemical hazards detection; (2) microbiological hazards detection; and (3) authenticity concerns. The review shows current spectroscopies to be effective tools that will play indispensable roles for food condiment evaluation. In addition, online/real-time applications of these techniques promise to be a huge growth field in the near future.

A fast determination of insecticide deltamethrin by spectral data fusion of UV-vis and NIR based on extreme learning machine

Spectral data fusion strategies combined with the extreme learning machine (ELM) algorithm was applied to determine the active ingredient in deltamethrin formulation. Ultraviolet-visible spectroscopy (UV-vis) is a rapid and sensitive detection method for specific components that are sensitive to ultraviolet irradiation. Alternatively, near-infrared spectroscopy (NIR) technology can be applied over a broader range. To determine a feasible method with a higher sensitivity and broader application range, the active ingredient of deltamethrin formulation was comprehensively investigated by combining the spectral data fusion strategy with ELM by employing UV-vis, NIR and fusion strategies, individually. Consequently, the results demonstrated that the low-level fusion strategy exhibited better predictive ability (lower RMSEP of 0.0645% and higher R² of 0.9978) than mid-level fusion and individual methods. ELM combined with data fusion is proved to be an efficient method for the rapid analysis of deltamethrin formulations. Furthermore, this study provides a potential approach for pesticide quality control as well as on-site monitoring.

Feasibility of Using VIS/NIR Spectroscopy and Multivariate Analysis for Pesticide Residue Detection in Tomatoes

The purpose of this work was to investigate the detection of the pesticide residual (profenofos) in tomatoes by using visible/near-infrared spectroscopy. Therefore, the experiments were performed on 180 tomato samples with different percentages of profenofos pesticide (higher and lower values than the maximum residual limit (MRL)) as compared to the control (no pesticide). VIS/near infrared (NIR) spectral data from pesticide solution and non-pesticide tomato samples (used as control treatment) impregnated with different concentrations of pesticide in the range of 400 to 1050 nm were recorded by a spectrometer. For classification of tomatoes with pesticide content at lower and higher levels of MRL as healthy and unhealthy samples, we used different spectral pre-processing methods with partial least squares discriminant analysis (PLS-DA) models. The Smoothing Moving Average pre-processing method with the standard error of cross validation (SECV) = 4.2767 was selected as the best model for this study. In addition, in the calibration and prediction sets, the percentages of total correctly classified samples were 90 and 91.66%, respectively. Therefore, it can be concluded that reflective spectroscopy (VIS/NIR) can be used as a non-destructive, low-cost, and rapid technique to control the health of tomatoes impregnated with profenofos pesticide.

Identification and characterization of impurities in an insecticide, bifenthrin technical

The HPLC-DAD and GC/MS methods were successfully used for the identification and characterization of the impurities in an agrochemical insecticide, bifenthrin technical. Three impurities ranging from 0.175%-0.541% were detected by the HPLC-DAD method. The LC/MS technique with ESI or APCI source failed to detect the impurities detected by HPLC-DAD, due to lack of ionization in ESI or APCI. The three impurities were enriched by prep-HPLC, and then their structures were elucidated based on the GC/EIMS and CIMS data. The EI mass spectra of bifenthrin and its impurities displayed molecular ion and provided structure indicative fragment ions; the CIMS data further confirmed their molecular weight. The identity of the impurity 1 was further confirmed by the synthesis of the authentic sample followed by NMR and GC/MS data.

Determination of pesticide residual levels in strawberry (Fragaria) by near-infrared spectroscopy

BACKGROUND

In this study, an infrared-based prediction method was developed for easy, fast and non-destructive detection of pesticide residue levels measured by reference analysis in strawberry (Fragaria × ananassa Duch, cv. Albion) samples using near-infrared spectroscopy and demonstrating its potential alternative or complementary use instead of traditional pesticide determination methods. Strawberries of Albion variety, which were supplied directly from greenhouses, were used as the study material. A total of 60 batch sample groups, each consisting of eight strawberries, was formed, and each group was treated with a commercial pesticide at different concentrations (26.7% boscalid + 6.7% pyraclostrobin) and varying residual levels were obtained in strawberry batches. The strawberry samples with pesticide residuals were used both to collect near-infrared spectra and to determine reference pesticide levels, applying QuEChERS (quick, easy, cheap, rugged, safe) extraction, followed by liquid chromatographic-mass spectrometric analysis.

RESULTS AND CONCLUSION

Partial least squares regression (PLSR) models were developed for boscalid and pyraclostrobin active substances. During model development, the samples were randomly divided into two groups as calibration (n = 48) and validation (n = 12) sets. A calibration model was developed for each active substance, and then the models were validated using cross-validation and external sets. Performance evaluation of the PLSR models was evaluated based on the residual predictive deviation (RPD) of each model. An RPD of 2.28 was obtained for boscalid, while it was 2.31 for pyraclostrobin. These results indicate that the developed models have reasonable predictive power. © 2019 Society of Chemical Industry.

Evaluation of quinclorac toxicity and alleviation by salicylic acid in rice seedlings using ground-based visible/near-infrared hyperspectral imaging

BACKGROUND

To investigate potential effects of herbicide phytotoxic on crops, a major challenge is a lack of non-destructive and rapid methods to detect plant growth that could allow characterization of herbicide-resistant plants. In such a case, hyperspectral imaging can quickly obtain the spectrum for each pixel in the image and monitor status of plants harmlessly.

METHOD

Hyperspectral imaging covering the spectral range of 380-1030 nm was investigated to determine the herbicide toxicity in rice cultivars. Two rice cultivars, Xiushui 134 and Zhejing 88, were respectively treated with quinclorac alone and plus salicylic acid (SA) pre-treatment. After ten days of treatments, we collected hyperspectral images and physiological parameters to analyze the differences. The score images obtained were used to explore the differences among samples under diverse treatments by conducting principal component analysis on hyperspectral images. To get useful information from original data, feature extraction was also conducted by principal component analysis. In order to classify samples under diverse treatments, full-spectra-based support vector classification (SVC) models and extracted-feature-based SVC models were established. The prediction maps of samples under different treatments were constructed by applying the SVC models using extracted features on hyperspectral images, which provided direct visual information of rice growth status under herbicide stress. The physiological analysis with the changes of stress-responsive enzymes confirmed the differences of samples under different treatments.

RESULTS

The physiological analysis showed that SA alleviated the quinclorac toxicity by stimulating enzymatic activity and reducing the levels of reactive oxygen species. The score images indicated there were spectral differences among the samples under different treatments. Full-spectra-based SVC models and extracted-feature-based SVC models obtained good results for the aboveground parts, with classification accuracy over 80% in training, validation and prediction set. The SVC models for Zhejing 88 presented better results than those for Xiushui 134, revealing the different herbicide tolerance between rice cultivars.

CONCLUSION

We develop a reliable and effective model using hyperspectral imaging technique which enables the evaluation and visualization of herbicide toxicity for rice. The reflectance spectra variations of rice could reveal the stress status of herbicide toxicity in rice along with the physiological parameters. The visualization of the herbicide toxicity in rice would help to provide the intuitive vision of herbicide toxicity in rice. A monitoring system for detecting herbicide toxicity and its alleviation by SA will benefit from the remarkable success of SVC models and distribution maps.

Authentication of Iberian pork official quality categories using a portable near infrared spectroscopy (NIRS) instrument

A portable near infrared spectroscopy (NIRS) instrument was evaluated for the discrimination of individual Iberian pig carcasses into the four official quality categories (defined by a combination of genotype and feeding regime). Spectra were obtained scanning four anatomical locations (live animal skin, carcass surface, fresh meat and subcutaneous fat samples) at a commercial abattoir, using a handheld micro electro mechanical system instrument. The best assignments into official quality categories with the NIRS measurements in the carcass surface and subcutaneous fat were able to correctly classify 75.9% and 73.8% of the carcasses, respectively. Moreover, 93.2% and 93.4% of carcasses were correctly classified according to feeding regimes by using the spectra from fresh meat and subcutaneous fat samples. The results suggest that, using subcutaneous fat samples, a portable NIRS could be used in commercial abattoirs as a tool to support the control of official quality category assignment in Iberian pig carcasses.

Feasibility of Laser-Induced Breakdown Spectroscopy and Hyperspectral Imaging for Rapid Detection of Thiophanate-Methyl Residue on Mulberry Fruit

An effective and rapid way to detect thiophanate-methyl residue on mulberry fruit is important for providing consumers with quality and safe of mulberry fruit. Chemical methods are complex, time-consuming, and costly, and can result in sample contamination. Rapid detection of thiophanate-methyl residue on mulberry fruit was studied using laser-induced breakdown spectroscopy (LIBS) and hyperspectral imaging (HSI) techniques. Principal component analysis (PCA) and partial least square regression (PLSR) were used to qualitatively and quantitatively analyze the data obtained by using LIBS and HSI on mulberry fruit samples with different thiophanate-methyl residues. The competitive adaptive reweighted sampling algorithm was used to select optimal variables. The results of model calibration were compared. The best result was given by the PLSR model that used the optimal preprocessed LIBS–HSI variables, with a correlation coefficient of 0.921 for the prediction set. The results of this research confirmed the feasibility of using LIBS and HSI for the rapid detection of thiophanate-methyl residue on mulberry fruit.

Rapid, simultaneous, and in situ authentication and quality assessment of intact bell peppers using near-infrared spectroscopy technology

BACKGROUND

The ability of near-infrared (NIR) spectroscopy to authenticate individual bell peppers as a function of the growing system (outdoor or greenhouse) was tested using partial least squares discriminant analysis. Bell peppers grown outdoors (130 samples) or in a greenhouse (264 samples) during the 2015 and 2016 seasons were selected for this purpose and analysed using a portable, handheld, microelectromechanical system (MEMS) instrument MicroPhazir (spectral range 1600-2400 nm), working in reflectance. Subsequently, the potential of NIR spectroscopy as a non-destructive sensor for in situ quality (dry matter and soluble solid content) measurements, was investigated.

RESULTS

The models correctly classified 89.73% and 88.00% of the samples by growing system, when trained with unbalanced and balanced sets respectively, mainly due to the differences in physical-chemical attributes between bell peppers cultivated in the two growing systems. Separate classification models for bell peppers grouped by ripeness (judged by the colour), allowed the classification of 88.28-91.37% of the samples correctly. The standard error of cross-validation values for the quantitative models were 0.66% fresh weight and 0.75 °Brix for dry matter and soluble solid content, respectively.

CONCLUSIONS

The results showed that NIR spectroscopy can be used successfully for predicting the growing systems used in bell pepper production, which is of particular value to guarantee the authentication of outdoor-grown peppers. Additionally, the results showed that NIR spectroscopy can be used simultaneously as a rapid preliminary screening technique to measure quality. © 2018 Society of Chemical Industry.

Quantitative Determination of Chlormequat Chloride Residue in Wheat Using Surface-Enhanced Raman Spectroscopy

A simple and sensitive method for detection of chlormequat chloride residue in wheat was developed using surface-enhanced Raman spectroscopy (SERS) coupled with chemometric methods on a portable Raman spectrometer. Pretreatment of wheat samples was performed using a two-step extraction procedure. Effective and uniform active substrate (gold nanorods) was prepared and mixed with the sample extraction solution for SERS measurement. The limit of detection for chlormequat chloride in wheat extracting solutions and wheat samples was 0.25 mg/L and 0.25 μg/g, which was far below the maximum residual value in wheat of China. Then, support vector regression (SVR) and kernel principal component analysis (KPCA), multiple linear regression, and partial least squares regression were employed to develop the regression models for quantitative analysis of chlormequat chloride residue with spectra around the characteristic peaks at 666, 713, and 853 cm^-1. As for the residue in wheat, the predicted recovery of established optimal model was in the range of 94.7% to 104.6%, and the standard deviation was about 0.007 mg/L to 0.066 mg/L. The results demonstrated that SERS, SVR, and KPCA can provide the accurate and quantitative determination for chlormequat chloride residue in wheat.

Effects of Foliar Insecticides on Leaf-Level Spectral Reflectance of Soybean

Pest-induced changes in plant reflectance are crucial for the development of pest management programs using remote sensing. However, it is unknown if plant reflectance data is also affected by foliar insecticides applied for pest management. Our study assessed the effects of foliar insecticides on leaf reflectance of soybean. A 2-yr field trial and a greenhouse trial were conducted using randomized complete block and completely randomized designs, respectively. Treatments consisted of an untreated check, a new systemic insecticide (sulfoxaflor), and two representatives of the most common insecticide classes used for soybean pest management in the north-central United States (i.e., λ-cyhalothrin and chlorpyrifos). Insecticides were applied at labeled rates recommended for controlling soybean aphid; the primary insect pest in the north-central United States. Leaf-level reflectance was measured using ground-based spectroradiometers. Sulfoxaflor affected leaf reflectance at some red and blue wavelengths but had no effect at near-infrared or green wavelengths. Chlorpyrifos affected leaf reflectance at some green, red, and near-infrared wavelengths but had no effect at blue wavelengths. λ-cyhalothrin had the least effect on spectral reflectance among the insecticides, with changes to only a few near-infrared wavelengths. Our results showing immediate and delayed effects of foliar insecticides on soybean reflectance indicate that application of some insecticides may confound the use of remote sensing for detection of not only insects but also plant diseases, nutritional and water deficiencies, and other crop stressors.

Application of visible/near-infrared reflectance spectroscopy for predicting internal and external quality in pepper

BACKGROUND

The characterization of internal (°Brix, pH, malic acid, total phenolic compounds, ascorbic acid and total carotenoid content) and external (color, firmness and pericarp wall thickness) pepper quality is necessary to better understand its possible applications and increase consumer awareness of its benefits. The main aim of this work was to examine the feasibility of using visible/near-infrared reflectance spectroscopy (VIS-NIRS) to predict quality parameters in different pepper types. Commercially available spectrophotometers were evaluated for this purpose: a Polychromix Phazir spectrometer for intact raw pepper, and a scanning monochromator for freeze-dried pepper.

RESULTS

The RPD values (ratio of the standard deviation of the reference data to the standard error of prediction) obtained from the external validation exceeded a value of 3 for chlorophyll a and total carotenoid content; values ranging between 2.5 < RPD < 3 for total phenolic compounds; between 1.5 < RPD <2.5 for °Brix, pH, color parameters a* and h* and chlorophyll b; and RPD values below 1.5 for fruit firmness, pericarp wall thickness, color parameters C*, b* and L*, vitamin C and malic acid content.

CONCLUSION

The present work has led to the development of multi-type calibrations for pepper quality parameters in intact and freeze-dried peppers. The majority of NIRS equations obtained were suitable for screening purposes in pepper breeding programs. Components such as pigments (xanthophyll, carotenes and chlorophyll), glucides, lipids, cellulose and water were used by modified partial least-squares regression for modeling the predicting equations. © 2015 Society of Chemical Industry.

Ability of NIRS technology to determine pesticides in liquid samples at maximum residue levels

BACKGROUND

Pesticide residues remaining on food represent a potential risk to consumer's health. Determination of these pesticide residues involves tedious procedures of analysis with regard to time and laboratory work. Near-infrared spectroscopy (NIRS) is a possible alternative to these methods. The aim of this research was to evaluate the ability of NIRS to classify two pesticides used for controlling apple fruit pests according to their concentration. Different solutions were prepared, based on the dose recommended by the pesticide producers for apple pest treatments. Spectra were acquired on a spectrophotometer from liquid samples belonging to these solutions.

RESULTS

Calibration models were developed from liquid samples, following the soft independent modelling of class analogy (SIMCA) analysis method. These models classified between 99 and 100% of the validation samples belonging to different pesticide concentration solutions even at the maximum residue limit level of these products in apple fruit.

CONCLUSIONS

NIRS technology shows a high potential for identifying pesticides in liquid samples, according to their concentration, at the levels required by the legislation.

Biosensors for the analysis of microbiological and chemical contaminants in food

Increases in food production and the ever-present threat of food contamination from microbiological and chemical sources have led the food industry and regulators to pursue rapid, inexpensive methods of analysis to safeguard the health and safety of the consumer. Although sophisticated techniques such as chromatography and spectrometry provide more accurate and conclusive results, screening tests allow a much higher throughput of samples at a lower cost and with less operator training, so larger numbers of samples can be analysed. Biosensors combine a biological recognition element (enzyme, antibody, receptor) with a transducer to produce a measurable signal proportional to the extent of interaction between the recognition element and the analyte. The different uses of the biosensing instrumentation available today are extremely varied, with food analysis as an emerging and growing application. The advantages offered by biosensors over other screening methods such as radioimmunoassay, enzyme-linked immunosorbent assay, fluorescence immunoassay and luminescence immunoassay, with respect to food analysis, include automation, improved reproducibility, speed of analysis and real-time analysis. This article will provide a brief footing in history before reviewing the latest developments in biosensor applications for analysis of food contaminants (January 2007 to December 2010), focusing on the detection of pathogens, toxins, pesticides and veterinary drug residues by biosensors, with emphasis on articles showing data in food matrices. The main areas of development common to these groups of contaminants include multiplexing, the ability to simultaneously analyse a sample for more than one contaminant and portability. Biosensors currently have an important role in food safety; further advances in the technology, reagents and sample handling will surely reinforce this position.