Use of the arginine-specific butanedione/phenylboronic acid tag for analysis of peptides and protein digests using matrix-assisted laser desorption/ionization mass spectrometry

A novel carbon-nitrogen coupled metabolic pathway promotes the recyclability of nitrogen in composting habitats

This study revealed a novel carbon-nitrogen coupled metabolic pathway. Results showed that the addition of inorganic carbon sources slowed down the decomposition of urea and conserved more nutrients in composting. Metagenomic analysis showed that the main bacteria involved in this new pathway were Actinobacteria, Proteobacteria and Firmicutes. During the late composting period, the dominant genus Microbacteium involved in denitrification accounted for 22.18% in control (CP) and only 0.12% in treatment group (T). Moreover, ureC, rocF, argF, argI, argG were key genes involved in urea cycle. The abundance of functional gene ureC and denitrification genes decreased in thermophilic and cooling phases, respectively. The genes hao, nosZ, ureA and nifH were more closely associated with Chloroflexi_bacterium and Bacillus_paralichenformis. In conclusion, composting habitats with additional inorganic carbon sources could not only weaken denitrification but also allow more nitrogen to be conserved through slow-release urea to improve resource utilization and decrease the environmental risk.

Mimicking LysC Proteolysis by 'Arginine-Modification-cum-Trypsin digestion': Comparison of Bottom-Up & Middle-Down Proteomic Approaches by ESI-QTOF-MS

BACKGROUND

Middle-down (MD) proteomics is an emerging approach for reliable identification of post- translational modifications and isoforms, as this approach focuses on proteolytic peptides containing > 25 - 30 amino acid residues (a.a.r.), which are longer than typical tryptic peptides. Such longer peptides can be obtained by AspN, GluC, LysC proteases. Additionally, some special proteases were developed specifically to effect MD approach, e.g., OmpT, Sap9, etc. However, these proteases are expensive. Herein we report a cost-effective strategy, 'arginine modification-cum trypsin digestion', which can produce longer tryptic peptides resembling LysC peptides derived from proteins.

OBJECTIVE

To obtain proteolytic peptides that resemble LysC peptides, by using 'trypsin', which is an less expensive protease.

METHODS

This strategy is based on the simple principle that trypsin cannot act at the C-termini of those arginines in proteins, whose sidechain guanidine groups are modified by 1,2-cyclohexanedione or phenylglyoxal.

RESULTS

As a proof of concept, we demonstrate this strategy on four models: β-casein (bovine), β- lactoglobulin (bovine), ovalbumin (chick) and transferrin (human), by electrospray ionization-mass spectrometry (ESI-MS) involving hybrid quadrupole time-of-flight. From the ESI-MS of these models, we obtained several arginine modified tryptic peptides, whose lengths are in the range, 30 - 60 a.a.r. The collision-induced dissociation MS/MS characteristics of some of the arginine modified longer tryptic peptides are compared with the unmodified standard tryptic peptides.

CONCLUSION

The strategy followed in this proof-of-concept study, not only helps in obtaining longer tryptic peptides that mimic LysC proteolytic peptides, but also facilitates in enhancing the probability of missed cleavages by the trypsin. Hence, this method aids in evading the possibility of obtaining very short peptides that are < 5 - 10 a.a.r. Therefore, this is indeed an cost-effective alternative/substitute for LysC proteolysis and in turn, for those MD proteomic studies that utilize LysC. Additionally, this methodology can be fruitful for mass spectrometry based de novo protein and peptide sequencing.

Mass Spectrometry-Based Protein Footprinting for Higher-Order Structure Analysis: Fundamentals and Applications

Proteins adopt different higher-order structures (HOS) to enable their unique biological functions. Understanding the complexities of protein higher-order structures and dynamics requires integrated approaches, where mass spectrometry (MS) is now positioned to play a key role. One of those approaches is protein footprinting. Although the initial demonstration of footprinting was for the HOS determination of protein/nucleic acid binding, the concept was later adapted to MS-based protein HOS analysis, through which different covalent labeling approaches "mark" the solvent accessible surface area (SASA) of proteins to reflect protein HOS. Hydrogen-deuterium exchange (HDX), where deuterium in D2O replaces hydrogen of the backbone amides, is the most common example of footprinting. Its advantage is that the footprint reflects SASA and hydrogen bonding, whereas one drawback is the labeling is reversible. Another example of footprinting is slow irreversible labeling of functional groups on amino acid side chains by targeted reagents with high specificity, probing structural changes at selected sites. A third footprinting approach is by reactions with fast, irreversible labeling species that are highly reactive and footprint broadly several amino acid residue side chains on the time scale of submilliseconds. All of these covalent labeling approaches combine to constitute a problem-solving toolbox that enables mass spectrometry as a valuable tool for HOS elucidation. As there has been a growing need for MS-based protein footprinting in both academia and industry owing to its high throughput capability, prompt availability, and high spatial resolution, we present a summary of the history, descriptions, principles, mechanisms, and applications of these covalent labeling approaches. Moreover, their applications are highlighted according to the biological questions they can answer. This review is intended as a tutorial for MS-based protein HOS elucidation and as a reference for investigators seeking a MS-based tool to address structural questions in protein science.

Mass spectrometric determination of early and advanced glycation in biology

Protein glycation in biological systems occurs predominantly on lysine, arginine and N-terminal residues of proteins. Major quantitative glycation adducts are found at mean extents of modification of 1-5 mol percent of proteins. These are glucose-derived fructosamine on lysine and N-terminal residues of proteins, methylglyoxal-derived hydroimidazolone on arginine residues and N(ε)-carboxymethyl-lysine residues mainly formed by the oxidative degradation of fructosamine. Total glycation adducts of different types are quantified by stable isotopic dilution analysis liquid chromatography-tandem mass spectrometry (LC-MS/MS) in multiple reaction monitoring mode. Metabolism of glycated proteins is followed by LC-MS/MS of glycation free adducts as minor components of the amino acid metabolome. Glycated proteins and sites of modification within them - amino acid residues modified by the glycating agent moiety - are identified and quantified by label-free and stable isotope labelling with amino acids in cell culture (SILAC) high resolution mass spectrometry. Sites of glycation by glucose and methylglyoxal in selected proteins are listed. Key issues in applying proteomics techniques to analysis of glycated proteins are: (i) avoiding compromise of analysis by formation, loss and relocation of glycation adducts in pre-analytic processing; (ii) specificity of immunoaffinity enrichment procedures, (iii) maximizing protein sequence coverage in mass spectrometric analysis for detection of glycation sites, and (iv) development of bioinformatics tools for prediction of protein glycation sites. Protein glycation studies have important applications in biology, ageing and translational medicine - particularly on studies of obesity, diabetes, cardiovascular disease, renal failure, neurological disorders and cancer. Mass spectrometric analysis of glycated proteins has yet to find widespread use clinically. Future use in health screening, disease diagnosis and therapeutic monitoring, and drug and functional food development is expected. A protocol for high resolution mass spectrometry proteomics of glycated proteins is given.

Adsorption-induced changes in ribonuclease A structure and enzymatic activity on solid surfaces

Ribonuclease A (RNase A) is a small globular enzyme that lyses RNA. The remarkable solution stability of its structure and enzymatic activity has led to its investigation to develop a new class of drugs for cancer chemotherapeutics. However, the successful clinical application of RNase A has been reported to be limited by insufficient stability and loss of enzymatic activity when it was coupled with a biomaterial carrier for drug delivery. The objective of this study was to characterize the structural stability and enzymatic activity of RNase A when it was adsorbed on different surface chemistries (represented by fused silica glass, high-density polyethylene, and poly(methyl-methacrylate)). Changes in protein structure were measured by circular dichroism, amino acid labeling with mass spectrometry, and in vitro assays of its enzymatic activity. Our results indicated that the process of adsorption caused RNase A to undergo a substantial degree of unfolding with significant differences in its adsorbed structure on each material surface. Adsorption caused RNase A to lose about 60% of its native-state enzymatic activity independent of the material on which it was adsorbed. These results indicate that the native-state structure of RNase A is greatly altered when it is adsorbed on a wide range of surface chemistries, especially at the catalytic site. Therefore, drug delivery systems must focus on retaining the native structure of RNase A in order to maintain a high level of enzymatic activity for applications such as antitumor chemotherapy.

Determination of orientation and adsorption-induced changes in the tertiary structure of proteins on material surfaces by chemical modification and peptide mapping

The labeling of amino acid residues followed by peptide mapping via mass spectrometry (AAL/MS) is a promising technique to provide detailed information on the adsorption-induced changes in its solvent accessibility. However, the potential of this method for the study of adsorbed protein structure is largely undeveloped at this time. The objective of this research was therefore to extend these capabilities by developing and applying AAL/MS techniques for a range of amino acid types to identify the dominant configurations of an adsorbed protein on a material surface. In this study, the configuration of hen egg white lysozyme (HEWL) adsorbed on fused silica glass, high-density polyethylene (HDPE) and poly(methyl methacrylate) (PMMA) was mapped by combining the labeling profiles obtained from five amino acid labels, which were independently applied. In order to be able to combine the results from the different amino acid labeling processes, the intensity of the HEWL segment without the target amino acids was used as an internal control to normalize the intensity shifts to an equivalent level. The resulting quantitative differences in the normalized amino acid profiles were then used to provide insights into adsorbed orientation, protein-protein interactions and adsorption-induced tertiary unfolding of HEWL, which were found to be distinctly different between the fused silica glass, HDPE and PMMA surfaces. The developed technique has the potential for broad application and for expansion to additional targeted amino acids to provide highly detailed information on the adsorbed state of any protein on any given surface.

Modification of citrulline residues with 2,3-butanedione facilitates their detection by liquid chromatography/mass spectrometry

Citrullination is a post-translational modification (PTM) that results from the deimination of the amino acid arginine into citrulline by Peptidyl Arginine Deiminase enzymes and occurs in a wide range of proteins in health and disease. This modification causes a 1 Da mass shift, which can be used to identify citrullination sites in proteins by the use of mass spectrometry. However, other PTMs, such as deamidation from asparagine to aspartic acid or from glutamine to glutamic acid, can also cause a 1 Da mass shift, making correct interpretation of the data more difficult. We developed a chemical tagging strategy which, combined with an open source search application, allowed us to selectively pinpoint citrullinated peptides in a complex mixture after liquid chromatography/mass spectrometry (LC/MS) analysis. After incubation of a peptide mixture with 2,3 butanedione, citrulline residues were covalently modified which resulted in a 50 Da shift in singly charged mass. By comparison of the peptide mass fingerprint from a modified and an unmodified version of the same sample, our in-house search application was able to identify the citrullinated peptides in the mixture. This strategy was optimized on synthetic peptides and validated on a digest of in vitro citrullinated fibrinogen, where different proteolytic enzymes were used to augment the protein coverage. This new method results in easy detection of citrullinated residues, without the need for complex mass spectrometry equipment.

Facile analysis and sequencing of linear and branched peptide boronic acids by MALDI mass spectrometry

Interest in peptides incorporating boronic acid moieties is increasing due to their potential as therapeutics/diagnostics for a variety of diseases such as cancer. The utility of peptide boronic acids may be expanded with access to vast libraries that can be deconvoluted rapidly and economically. Unfortunately, current detection protocols using mass spectrometry are laborious and confounded by boronic acid trimerization, which requires time-consuming analysis of dehydration products. These issues are exacerbated when the peptide sequence is unknown, as with de novo sequencing, and especially when multiple boronic acid moieties are present. Thus, a rapid, reliable, and simple method for peptide identification is of utmost importance. Herein, we report the identification and sequencing of linear and branched peptide boronic acids containing up to five boronic acid groups by matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS). Protocols for preparation of pinacol boronic esters were adapted for efficient MALDI analysis of peptides. Additionally, a novel peptide boronic acid detection strategy was developed in which 2,5-dihydroxybenzoic acid (DHB) served as both matrix and derivatizing agent in a convenient, in situ, on-plate esterification. Finally, we demonstrate that DHB-modified peptide boronic acids from a single bead can be analyzed by MALDI-MSMS analysis, validating our approach for the identification and sequencing of branched peptide boronic acid libraries.

Probing protein structure by amino acid-specific covalent labeling and mass spectrometry

For many years, amino acid-specific covalent labeling has been a valuable tool to study protein structure and protein interactions, especially for systems that are difficult to study by other means. These covalent labeling methods typically map protein structure and interactions by measuring the differential reactivity of amino acid side chains. The reactivity of amino acids in proteins generally depends on the accessibility of the side chain to the reagent, the inherent reactivity of the label and the reactivity of the amino acid side chain. Peptide mass mapping with ESI- or MALDI-MS and peptide sequencing with tandem MS are typically employed to identify modification sites to provide site-specific structural information. In this review, we describe the reagents that are most commonly used in these residue-specific modification reactions, details about the proper use of these covalent labeling reagents, and information about the specific biochemical problems that have been addressed with covalent labeling strategies.

Applications of chemical tagging approaches in combination with 2DE and mass spectrometry

Chemical modification reactions play an important role in various protocols for mass-spectrometry-based proteome analysis; this applies to both gel-based and gel-free proteomics workflows. In combination with two-dimensional gel electrophoresis (2DE), the addition of "tags" by means of chemical reactions serves several purposes. Potential benefits include increased sensitivity or sequence coverage for peptide mass fingerprinting and improved peptide fragmentation for de novo sequencing studies. Tagging strategies can also be used to obtain complementary quantitative information in addition to densitometry, and they may be employed for the study of post-translational modifications. In combination with the unique advantages of 2DE as a separation technique, such approaches provide a powerful toolbox for proteomic research. In this review, relevant examples from recent literature will be given to illustrate the capabilities of chemical tagging approaches, and methodological requirements will be discussed.

Identifying residues in antigenic determinants by chemical modification

Chemical modification of the side chains of amino acid residues was one of the first methods developed to investigate epitopes in protein antigens. The principle of the method is that alteration of the structure of a key residue of an epitope by a chemical modification will alter reactivity with antibody by affecting either specificity or avidity or both. Chemical modification has the advantage that it can be applied to discontinuous as well as continuous epitopes and may be of value in identifying cryptic epitopes. We consider here the several recent studies that have applied site-specific chemical modification to the identification of epitopes on antigens, including the use of formaldehyde, glutaraldehyde, and acid anhydrides, to produce allergoids where determinants important to reaction with IgE are modified but the ability to elicit an IgG response is retained. It is noteworthy that modification of amino groups with charge reversal appears to be the most useful approach. The approach to the use of site-specific chemical modification as a tool for the study of protein function is discussed, and emphasis is placed on the necessity to (1) validate the specificity of modification and (2) assess potential conformational change that may occur secondary to modification. Finally, a list of chemical reagents used for protein modification is presented, together with properties and references to use.

An improved method for de novo sequencing of arginine-containing, Nalpha-tris(2,4,6-trimethoxyphenyl)phosphonium-acetylated peptides

An improved method for de novo sequencing of arginine-containing peptides modified with succinimidyloxycarbonylmethyl tris(2,4,6-trimethoxyphenyl)phosphonium bromide (TMPP-Ac-OSu) is reported. A tagging reagent, TMPP-Ac-OSu, was introduced to improve the sequence analysis of peptides owing to the simplified fragmentation pattern. However, peptides containing arginine residues did not fragment efficiently even after TMPP-Ac modification at their N-termini. This report describes how fragmentation efficiency of TMPP-Ac-modified arginine-containing peptides was significantly improved by modifying the guanidino group on the side chain of arginine with acetylacetone.