High-throughput paper spray mass spectrometry via induced voltage

Electrical Detection of Molecular Transformations Associated with Chemical Reactions Using Graphene Devices

This study proposes a method to electrically detect chemical reactions that involve bond changes through reactions on graphene surfaces. To achieve a highly sensitive detection, we focused on the thiol-ene reaction that combines the maleimide and thiol groups. Graphene field-effect transistors (FETs) were used to detect the binding changes of the modified molecules. Graphene has high carrier mobility and is sensitive to changes in the electronic state of its surface. Graphene has been used as a sensor to detect low-concentration targets with high sensitivity. N-(9-Acridinyl)maleimide (NAM) was chosen as the modified molecule to immobilize maleimide on graphene through π-interaction, and methanethiol (MeSH) was set as the target thiol. The modification of NAM to graphene was first confirmed by attenuated total reflection Fourier transform infrared spectroscopy, and the modification density was 0.5 ± 0.1/nm² through cyclic voltammetry. Owing to a bond exchange, the transfer characteristics of the graphene FET shifted by 2 V to the negative direction after being exposed to MeSH at 10 parts per billion (ppb), equivalent to 0.2 ng, under ultraviolet irradiation. With 5000 ppb of acetic acid, it only shifted 0.7 V. With 1000 ppb of ethanol and 10,000 ppb of methanol, it shifted to the positive direction by 0.4 and 0.6 V, respectively. Because the nontarget molecule showed only a slight response, a thiol-ene chemical reaction was detected. The proposed method can detect the bond-change reaction using an ultralow concentration of MeSH, which indicates that at least 10 ppb (or 0.2 ng) of MeSH was detected by the graphene FET.

Recent Advances of In-Source Electrochemical Mass Spectrometry

Hyphenation of electrochemistry (EC) and mass spectrometry has become a powerful tool to study redox processes. Approaches that can achieve this hyphenation include integrating chromatography/electrophoresis between electroinduced redox reactions and detection of products, coupling an EC flow cell to a mass spectrometer, and performing electrochemical reactions inside the ion source of a mass spectrometer. The first two approaches have been well reviewed elsewhere. This Minireview highlights the inherent electrochemical properties of many mass spectrometry ion sources and their roles in the coupling of electrochemistry and mass spectrometric analysis. Development of modified ion sources that allow the compatibility of electrochemistry with ionization processes is also surveyed. Applications of different in-source electrochemical devices are provided including intermediate capturing, bioanalytical studies, nanoparticle formation, electrosynthesis, and electrode imaging.

High-throughput screening of organic reactions in microdroplets using desorption electrospray ionization mass spectrometry (DESI-MS): hardware and software implementation

This study describes an automated system used for high throughput screening of reaction conditions based on accelerated reactions occurring in small volumes of reagents. Reaction mixtures are prepared in array format using a fluid handling robot and spotted on a flat polytetrafluoroethylene plate at densities up to 6144 per plate. The reaction and analysis steps are performed simultaneously using desorption electrospray ionization (DESI) to release microdroplets containing the reaction mixture from the plate for reaction prior to arrival at a mass spectrometer. Analysis rates are up to 1 reaction mixture per second and data are recorded in real time using an ion trap mass spectrometer. Beacon compounds are used to triangulate position on the plate and this allows tandem mass spectrometry (MS/MS) to be performed on confirm products of interest. Custom software allows the user to control the system. It is also used to receive data from the DESI mass spectrometer to screen the spectra for compounds of interest, to perform MS/MS and to save data. This custom software also communicates with the software controlling the fluid handling robot (Biomek i7) as well as the Beckman software used to prepare reaction mixtures and also the software that controls the solvent used as the DESI spray. Data were recorded for N-alkylation, N-acylation and N-sulfonylation reactions in three 8 hour experiments on successive days to establish the ruggedness and repeatability of the system. Repeatability is high (94-97%) over this period with false negative 6% (depending on noise threshold chosen). Plates containing 384 reaction mixtures are analyzed in 7 min by moving the DESI sprayer in steps under the sprayer instead of continuously.