The use of pseudo-MRM for a sensitive and selective detection and quantification of polycyclic aromatic compounds by tandem mass spectrometry

A dilute-and-inject liquid-gas chromatography-mass spectrometry method for the analysis of sixteen polycyclic aromatic hydrocarbons in extra-virgin olive oil

BACKGROUND

Polycyclic aromatic hydrocarbons (PAHs) represent a diverse group of organic compounds characterized by the fusion of two or more benzene rings arranged in various structural forms. Due to their harmful effects on human health, it is essential to implement monitoring systems and preventive measures to regulate human exposure. Given the affinity of PAHs for lipids, extensive research has been focused on their presence in vegetable oils. This study aimed to develop an on-line liquid-gas chromatography (LC-GC) method (using tandem mass spectrometry) with minimized solvent consumption for the determination of 16 PAHs in extra-virgin olive oil (EVOO).

RESULTS

A side-by-side comparison of the selected-ion-monitoring and the pseudo multiple-reaction-monitoring (p-MRM) acquisition modes was performed, in terms of specificity and detectability. The results obtained using the p-MRM mode were superior, and for this reason it was selected. The method was linear over the concentration range 1-200 μg kg-1 (except in five cases, over 2-200 and 5-200 μg kg-1 ranges). Accuracy (at the 2 μg kg-1 and 20 μg kg-1 concentration levels) was in the 86.9-109.3 % range, with an RSD <10 %. Intra-day and inter-day precision (at 2 μg kg-1 and 20 μg kg-1 concentration levels) were in the 1.2-9.7 % and 3.2-10.8 % ranges, respectively. For all the PAHs, a negative matrix effect was observed. Three out of sixteen PAHs were detected in three EVOOs (among ten samples), albeit at the low ppb level. Limits of quantification were satisfactory in relation to EU legislation on the presence of PAHs in vegetable oils.

SIGNIFICANCE

A dilute-and-inject LC-GC-tandem mass spectrometry method is herein proposed fulfilling EU legislation requirements; sample preparation was very simple, inasmuch that it involved only a dilution step, thus avoiding extraction, clean-up, and thus a high consumption of organic solvents. In fact, considering both oil dilution and the LC mobile phase, less than 8 mL of solvents were used.

Removal of isobaric interference using pseudo-multiple reaction monitoring and energy-resolved mass spectrometry for the isotope dilution quantification of a tryptic peptide

Energy-resolved mass spectrometry (ERMS) and an isotopically labelled internal standard were successfully combined to accurately quantify a tryptic peptide despite the presence of an isobaric interference. For this purpose, electrospray ionisation tandem mass spectrometry (ESI-MS/MS) experiments were conducted into an ion trap instrument using an unconventional 8 m/z broadband isolation window, which encompassed both the tryptic peptide and its internal standard. Interference removal was assessed by determining an excitation voltage that was high enough to maintain a constant value for the analyte/internal standard peaks intensity ratio, thus ensuring accurate quantification even in the presence of isobaric contamination. Pseudo-multiple reaction monitoring (MRM) was employed above this excitation voltage to quantify the trypic peptide. The internal standard calibration model showed no lack of fit and exhibited a linear dynamic range from 0.5 μM up to 2.5 μM. The detection limit was 0.08 μM. The accuracy of the method was evaluated by quantifying the tryptic peptide of three reference samples intentionally contaminated with the isobaric interference. All the reference samples were accurately quantified with ∼1% deviation despite the isobaric contamination. Furthermore, we have demonstrated that this methodology can also be applied to quantify the isobaric peptide by standard additions down to 0.2 μM. Finally, liquid chromatography ERMS (LC ERMS) experiments yielded similar results, suggesting the potential of the proposed methodology for analysing complex samples.

LC-MS accurate quantification of a tryptic peptide co-eluted with an isobaric interference by using in-source collisional purification

Interferences from isobaric and isomeric compounds represent a common problem in liquid chromatography coupled to mass spectrometry (LC-MS). In this paper, in-source purification and chromatographic separation were combined with the aim of identifying isobaric contamination and quantifying accurately a compound despite the presence of an isobaric co-eluted interference. This is achieved by totally fragmenting in-source the precursor ions of the isobaric interference providing then LC-pseudo-MS2 capability, which allows an accurate quantification without the need for optimizing the chromatographic conditions to separate the co-eluted interference. To illustrate this concept, mixtures of tryptic and non-tryptic peptides were used. The ratio of peak areas of the tryptic peptide and its isotopically labelled internal standard was used not only for quantification with an internal standard calibration curve but also to know (1) if an isobaric interference co-eluted with the tryptic peptide; and (2) what is the minimum cone voltage necessary to ensure the complete removal of isobaric interference. This strategy was applied to quantify the tryptic peptide of two standards with known concentrations and, intentionally contaminated with the isobaric interference. The confidence intervals of the concentrations calculated with the internal standard calibration curve were 8.0 ± 0.5 μM (prepared at 8.0 μM) and 15.7 ± 0.5 μM (prepared at 16.1 μM) that confirm the tryptic peptide can be correctly quantified by in-source purification without the need for improving the chromatographic separation from its isobaric interference.