Pre-treatment of titanium surfaces by fibronectin: in situ adsorption and effect of concentration

Interactions between Metal Oxides and Biomolecules: from Fundamental Understanding to Applications

Metallo-oxide (MO)-based bioinorganic nanocomposites promise unique structures, physicochemical properties, and novel biochemical functionalities, and within the past decade, investment in research on materials such as ZnO, TiO₂, SiO₂, and GeO₂ has significantly increased. Besides traditional approaches, the synthesis, shaping, structural patterning, and postprocessing chemical functionalization of the materials surface is inspired by strategies which mimic processes in nature. Would such materials deliver new technologies? Answering this question requires the merging of historical knowledge and current research from different fields of science. Practically, we need an effective defragmentation of the research area. From our perspective, the superficial accounting of material properties, chemistry of the surfaces, and the behavior of biomolecules next to such surfaces is a problem. This is particularly of concern when we wish to bridge between technologies in vitro and biotechnologies in vivo. Further, besides the potential practical technological efficiency and advantages such materials might exhibit, we have to consider the wider long-term implications of material stability and toxicity. In this contribution, we present a critical review of recent advances in the chemistry and engineering of MO-based biocomposites, highlighting the role of interactions at the interface and the techniques by which these can be studied. At the end of the article, we outline the challenges which hamper progress in research and extrapolate to developing and promising directions including additive manufacturing and synthetic biology that could benefit from molecular level understanding of interactions occurring between inanimate (abiotic) and living (biotic) materials.

Grafting of architecture controlled poly(styrene sodium sulfonate) onto titanium surfaces using bio-adhesive molecules: Surface characterization and biological properties

This contribution reports on grafting of bioactive polymers such as poly(sodium styrene sulfonate) (polyNaSS) onto titanium (Ti) surfaces. This grafting process uses a modified dopamine as an anchor molecule to link polyNaSS to the Ti surface. The grafting process combines reversible addition-fragmentation chain transfer polymerization, postpolymerization modification, and thiol-ene chemistry. The first step in the process is to synthetize architecture controlled polyNaSS with a thiol end group. The second step is the adhesion of the dopamine acrylamide (DA) anchor onto the Ti surfaces. The last step is grafting polyNaSS to the DA-modified Ti surfaces. The modified dopamine anchor group with its bioadhesive properties is essential to link bioactive polymers to the Ti surface. The polymers are characterized by conventional methods (nuclear magnetic resonance, size exclusion chromatography, and attenuated total reflection-Fourier-transformed infrared), and the grafting is characterized by x-ray photoelectron spectroscopy, time-of-flight secondary ion mass spectrometry, and quartz crystal microbalance with dissipation monitoring. To illustrate the biocompatibility of the grafted Ti-DA-polyNaSS surfaces, their interactions with proteins (albumin and fibronectin) and cells are investigated. Both albumin and fibronectin are readily adsorbed onto Ti-DA-polyNaSS surfaces. The biocompatibility of modified Ti-DA-polyNaSS and control ungrafted Ti surfaces is tested using human bone cells (Saos-2) in cell culture for cell adhesion, proliferation, differentiation, and mineralization. This study presents a new, simple way to graft bioactive polymers onto Ti surfaces using a catechol intermediary with the aim of demonstrating the biocompatibility of these size controlled polyNaSS grafted surfaces.

Alumina-zirconia composites functionalized with laminin-1 and laminin-5 for dentistry: effect of protein adsorption on cellular response

The present paper describes a study on laminin interaction with the surface of two alumina-zirconia composites with different percentages of ZrO2, both with submicrometric grain size. As major molecules within the basement membrane (BM), laminins are important protein fragments for epithelial cell adhesion and migration. On the other hand, alumina-zirconia composites are very attractive materials for dental applications due to their esthetic and mechanical properties. X-Ray photoelectron spectroscopy and atomic force microscopy were used to study the adsorption of two types of laminin, laminin-1 (Ln-1) and laminin-5 (Ln-5), onto the ceramics surfaces. The in vitro cell response was determined by intracellular phosphorylation of major kinases. Ceramics samples functionalized with laminins showed better cellular activation than untreated specimens; furthermore, cellular activation was found to be greater for the composite with higher percentage in zirconia when functionalized with Ln-5, whereas the adsorption of Ln-1 resulted in a greater activation for the alumina-rich oxide.

Oxygen plasma immersion ion implantation treatment enhances the human bone marrow mesenchymal stem cells responses to titanium surface for dental implant application

OBJECTIVES

The present investigation utilized a novel oxygen plasma immersion ion implantation (O-PIII) treatment to create a dense and thin oxide layer on a titanium (Ti) surface for dental implant application.

MATERIALS AND METHODS

This study evaluated the behavior of human bone marrow mesenchymal stem cells (hMSCs) on O-PIII-treated Ti. The O-PIII treatments were performed using different oxygen ion doses (T(L): 1 × 10(16); T(M): 4 × 10(16); T(H): 1 × 10(17) ions/cm(2)).

RESULTS

Analysis using an X-ray photoelectron spectrometer (XPS) and high resolution X-ray diffractometer (HR-XRD) indicated that the O-PIII-treated specimen T(M) had the highest proportion of rutile phase TiO2 component. The O-PIII-treated specimen T(M) had the greatest protein adsorption capability of the test Ti surfaces using XPS analysis and bicinchoninic acid (BCA) protein assay. Immunofluorescent staining revealed that hMSCs had the best cell adhesion on the O-PIII-treated specimen T(M), whereas green fluorescent protein (GFP)-labeled hMSCs experienced the fastest cell migration based on a wound healing assay. Other assays, including MTT assay, Alizarin red S staining and Western blot analysis, demonstrated that the adhered hMSCs exhibited the greatest cell proliferation, mineralization, and differentiation capabilities on the TM specimen.

CONCLUSIONS

Oxidated Ti (primarily rutile TiO2 ) was produced using a facile and rapid O-PIII treatment procedure, which enhances the biocompatibility of the Ti surface with potential implications for further dental implant application.

Adsorption behavior of human plasma fibronectin on hydrophobic and hydrophilic Ti6Al4V substrata and its influence on bacterial adhesion and detachment

Biomaterial implant-associated infections, a common cause of medical devices' failure, are initiated by bacterial adhesion to an adsorbed protein layer on the implant material surface. In this study, the influence of protein surface orientation on bacterial adhesion has been examined using three clinically relevant bacterial strains known to express specific binding sites for human plasma fibronectin (HFN). HFN was allowed to adsorb on hydrophobic Ti6Al4V and physically modified hydrophilic Ti6Al4V substrata. Ellipsometric data reveal that the characteristics of the adsorbed protein layers primary depend on solid surface tension and the initial protein concentration in solution. In particular, HFN molecules adopt a more extended conformation on hydrophobic than hydrophilic surfaces, an effect that is more pronounced at low than at high initial protein concentrations. Moreover, the extended conformation of the protein molecules on these surfaces likely facilitates the exposure of specific sites for adhesion, resulting in the higher bacterial-cell attachment observed regardless of the strain considered. Contact angle measurements and the analysis of the number of remaining adhering cells after being subjected to external forces further suggest that both specific and nonspecific (hydrophobic) interactions play an important role on bacterial attachment. This study is the first one to evaluate the influence of surface hydrophobicity on protein adsorption and its subsequent effect on bacterial adhesion using a material whose hydrophobicity was not modified using chemical treatments that potentially led to surface properties changes other than hydrophobicity.