A Chitosan/Urushi Anion Exchange Membrane for a Non-aqueous Redox Flow Battery

'Beyond Li-ion technology'-a status review

Li-ion battery is currently considered to be the most proven technology for energy storage systems when it comes to the overall combination of energy, power, cyclability and cost. However, there are continuous expectations for cost reduction in large-scale applications, especially in electric vehicles and grids, alongside growing concerns over safety, availability of natural resources for lithium, and environmental remediation. Therefore, industry and academia have consequently shifted their focus towards 'beyond Li-ion technologies'. In this respect, other non-Li-based alkali-ion/polyvalent-ion batteries, non-Li-based all solid-state batteries, fluoride-ion/ammonium-ion batteries, redox-flow batteries, sand batteries and hydrogen fuel cells etc. are becoming potential cost-effective alternatives. While there has been notable swift advancement across various materials, chemistries, architectures, and applications in this field, a comprehensive overview encompassing high-energy 'beyond Li-ion' technologies, along with considerations of commercial viability, is currently lacking. Therefore, in this review article, a rationalized approach is adopted to identify notable 'post-Li' candidates. Their pros and cons are comprehensively presented by discussing the fundamental principles in terms of material characteristics, relevant chemistries, and architectural developments that make a good high-energy 'beyond Li' storage system. Furthermore, a concise summary outlining the primary challenges of each system is provided, alongside the potential strategies being implemented to mitigate these issues. Additionally, the extent to which these strategies have positively influenced the performance of these 'post-Li' technologies is discussed.

Effects of Fe Ions, Ultraviolet Irradiation, and Heating on Microscopic Structures of Black Lacquer Films

The chemical reaction between Fe and lacquer has been used to create the black color in lacquer coatings since ancient times. Here, the effects of Fe ion addition, UV irradiation, and heating on the microscopic structures of black lacquer films were investigated by using X-ray absorption near edge structure (XANES), extended X-ray absorption fine structure (EXAFS), Fourier transform-infrared spectroscopy (FT-IR), small-angle X-ray scattering (SAXS), and small angle neutron scattering (SANS). The EXAFS result indicated that heating and UV irradiation made the coordination structure of Fe3+ in the lacquer nonuniform, and that heating caused the greatest nonuniformity. The FT-IR, SAXS, and SANS results demonstrated that the microscopic structural changes in the black lacquer films were induced by both heating and UV irradiation, but the changes were different. Heating caused a substantial structural change on the nanoscale, and UV irradiation mainly caused changes in the molecular binding mode. The results provide important knowledge for analyzing archeological lacquer samples and for developing lacquer-based materials. This work also demonstrates the utility of the complementary use of XANES, EXAFS, FT-IR, SAXS, and SANS for nondestructive analysis of black lacquer in precious cultural relics.

Identifying structure-function relationships to modulate crossover in nonaqueous redox flow batteries

Nonaqueous redox flow batteries (NARFBs) offer a promising solution for large-scale storage of renewable energy. However, crossover of redox active molecules between the two sides of the cell is a major factor limiting their development, as most selective separators are designed for deployment in water, rather than organic solvents. This report describes a systematic investigation of the crossover rates of redox active organic molecules through an anion exchange separator under RFB-relevant non-aqueous conditions (in acetonitrile/KPF6) using a combination of experimental and computational methods. A structurally diverse set of neutral and cationic molecules was selected, and their rates of crossover were determined experimentally with the organic solvent-compatible anion exchange separator Fumasep FAP-375-PP. The resulting data were then fit to various descriptors of molecular size, charge, and hydrophobicity (overall charge, solution diffusion coefficient, globularity, dynamic volume, dynamic surface area, clogP). This analysis resulted in multiple statistical models of crossover rates for this separator. These models were then used to predict tether groups that dramatically slow the crossover of small organic molecules in this system.

Fabrication of a composite anion exchange membrane with aligned ion channels for a high-performance non-aqueous vanadium redox flow battery

Fabrication of high-conductivity ion exchange membranes (IEMs) is crucial to improve the performance of non-aqueous vanadium redox flow batteries (NAVRFBs). In the present work, anion exchange membranes with high-conductivity were fabricated by aligning ion channels of the polymer electrolyte impregnated in porous polytetrafluoroethylene (PTFE) under electric fields. It was observed that the ion channels of the polymer electrolyte were uniformly orientated in the atomic-force microscopy image. Its morphological change could minimize detouring of the transport of BF₄⁻ ions. The results showed through-plane conductivity was improved from 12.7 to 33.1 mS cm⁻¹. The dimensional properties of the fabricated membranes were also enhanced compared with its cast membrane owing to the reinforcing effect of the substrate. Especially, the NAVRFB assembled with the optimized membrane showed increased capacities, with a 97% coulombic efficiency and 70% energy efficiency at 80 mA cm⁻². Furthermore, the optimized membrane made it possible to operate the NAVRFB at 120 mA cm⁻². Its operating current density was 120 times higher than that of a frequently used AHA membrane for RFBs.

Fabrication of high-conductivity ion exchange membranes (IEMs) is crucial to improve the performance of non-aqueous vanadium redox flow batteries (NAVRFBs).