A Facile Electrochemical Preparation of Violarite (Ni2FeS4) Nanosheets on Carbon Sheet and its Application towards Non-Enzymatic Glucose Sensing

A facile method for the fabrication of hierarchically structured Ni2CoS4 nanopetals on carbon nanofibers to enhance non-enzymatic glucose oxidation

Unique Ni₂CoS₄-carbon nanofiber (CNF) composite nanostructures were fabricated using a simple electrospinning-assisted hydrothermal route and used for the rapid and accurate electrochemical oxidation of glucose in real samples at the trace level. Electrochemical impedance spectroscopy and cyclic voltammetry of unmodified and modified electrodes revealed low charge-transfer resistance and the excellent electrocatalytic sensing of glucose when using the Ni₂CoS₄-CNF at a low potential due to the combined benefits of the highly conductive Ni₂Co₂S₄ anchored to the large surface area of the CNFs. Amperometric analysis of the fabricated sensor has shown an extremely low limit of detection (0.25 nM) and a large linear range (5-70 nM) for glucose at a working potential of 0.54 V (vs. Hg/HgO). The practicability of the Ni₂CoS₄-CNF for use in glucose determination was tested withl human saliva, blood plasma, and fruit juice samples. The Ni₂CoS₄-CNF/GCE showed acceptable recovery values for human saliva (99.1-100.8%), blood plasma (98.6-101.5%), and fruit juice (95.1-105.7%) samples. The proposed sensor also exhibited outstanding electroanalytical characteristics for glucose oxidation in these samples, including reusability, repeatability, and interference resistance, even in the presence of other biological substances and organic and inorganic metal ions.

A non-enzymatic glucose sensor based on a CoNi2Se4/rGO nanocomposite with ultrahigh sensitivity at low working potential

A CoNi₂Se₄–rGO nanocomposite fabricated on Ni foam shows excellent efficiency for non-enzymatic glucose sensing at low applied potential.

Facile one-pot synthesis of NiCo2Se4-rGO on Ni foam for high performance hybrid supercapacitors

A facile, innovative synthesis for the fabrication of NiCo₂Se₄-rGO on a Ni foam nanocomposite via a simple hydrothermal reaction is proposed. The as-prepared NiCo₂Se₄-rGO@Ni foam electrode was tested through pxrd, TEM, SEM, and EDS to characterize the morphology and the purity of the material. The bimetallic electrode exhibited outstanding electrochemical performance with a high specific capacitance of 2038.55 F g⁻¹ at 1 A g⁻¹. NiCo₂Se₄-rGO@Ni foam exhibits an extensive cycling stability after 1000 cycles by retaining 90% of its initial capacity. A superior energy density of 67.01 W h kg⁻¹ along with a high power density of 903.61 W kg⁻¹ further proved the high performance of this electrode towards hybrid supercapacitors. The excellent electrochemical performance of NiCo₂Se₄-rGO@Ni foam can be explained through the high electrocatalytic activity of NiCo₂Se₄ in combination with reduced graphene oxide which increases conductivity and surface area of the electrode. This study proved that NiCo₂Se₄-rGO@Ni foam can be utilized as a high energy density-high power density electrode in energy storage applications.

A hybrid supercapacitor comprising a NiCo₂Se₄-rGO composite has been fabricated on Ni foam and shows high energy and power density and superior flexibility.