Highly Selective Aqueous Phase Detection of Azinphos-Methyl Pesticide in ppb Level Using a Cage-Connected 3D MOF

A bionic palladium metal-organic framework based on a fluorescence sensing enhancement mechanism for sensitive detection of phorate

We have developed a biomimetic fluorescent nanoprobe (Pd-MOF) that can accurately identify phorate at a fixed wavelength for rapid, sensitive and selective detection. Pd-MOF was a nanoparticle (260.00 ± 27.83 nm) based on the linkage of Pd metal and a TCPP organic framework. It could detect phorate according to the fluorescence principles similar to that of the bioluminescence of Chrysaora pacifica (substance interaction and chromophore fluorescence enhancement). When phorate molecules enter the pores of Pd-MOF and interact with each other, the energy transfer process is stimulated, and the fluorescence signal is significantly enhanced, thereby improving the detection sensitivity. According to shift of the white line in the XANES energy spectrum and the DFT results, phorate increased the energy gap of Pd-MOF from 0.025 eV to 0.046 eV, enhanced the stability of the system, and thus achieved fluorescence enhancement. The sensitivity of Pd-MOF was due to its much smaller energy gap (<80 times) than other metal MOFs and thus it was easier to get excited. The linear detection range for the phorate of the nanoprobe in the water system was 0.01-100 ppb, and the detection limit was 0.0017 ppb. The response time of the Pd-MOF nanoprobe to phorate was 45 seconds. The detection of phorate in tap water, pear and cabbage samples showed that the recovery rates were in the range of 87.69-106.12%, and the relative standard deviation (RSD) was less than 11.16%, which verified the possibility of Pd-MOF nanoprobe in practical application. The sensitive and specific recognition of phorate by Pd-MOF nanoprobe and the development of a phorate test strip (Pd-MOF@paper) confirmed its potential application in pesticide residue detection.

De novo Cu-MOF@CNS nanocomposite coated on a cotton fibrils framework for sustainable solar-driven desalination

Environmental researchers are extremely concerned about addressing the declining availability of drinking water, which is a critical issue in many nations. Solar-driven desalination is an emerging and pioneering renewable approach to reduce potable water scarcity that is suitable for remote locations, developing countries, and disaster zones as it does not require additional energy supply. However, there are still issues with the scalable preparation of photothermal materials, such as achieving low cost and widening the assortment of useful applications. Conventional carbon- and metal-based absorbers are intricate and fragile, which make them difficult to install and transport in places with minimal infrastructure. Thus, a universal process for creating adaptable solar evaporators is sorely required. Herein, we have come up with a holistic approach using a solar absorber (GJ-01(Cal)) derived from a Cu-MOF (HKUST-1) and carbon nanosheets (CNSs) for generating potable water from saline water using solar radiation. The as-synthesized material provides high-performance photothermal water evaporation when illuminated under solar irradiation at the air-water interface. Moreover, its porous structure, high photothermal conversion efficiency, rapid water flow, and heat insulation make it appropriate for saline water desalination. CNS play a pivotal role in improving the photothermal features of the solar absorber (GJ-01(Cal)) in terms of conjugation to promote Cu(0) species and pyrrolic nitrogen (P-N) amplification and thereby enrich the p-type nature of the absorber's triphasic configuration. With these photothermal factors, the localised surface plasmon resonance (LSPR) of electrons increases and achieves high solar spectrum absorption. The GJ-01(Cal) was further coated on porous cotton fibrils (CF) that regulate photothermal interfacial evaporation (PTIE) by allowing water transportation via capillary action. This assemblage of the nanocomposite on CF efficiently evaporates water at a higher surface temperature of ∼47 °C under one solar illumination, achieving 4.23 kg m-2 h-1 of evaporation flux and 96.5% light-to-heat conversion efficiency. Interestingly, the GJ-01(Cal) coated over CF can be recycled at least 10 times. Additionally, it offers scalable production for higher photothermal efficiency with a flexible substrate as a solar evaporator and is beneficial for society paving new horizons towards a sustainable environment.

Turn-off luminescence sensing, white light emission and magnetic studies of two-dimensional lanthanide MOFs

The lanthanide metal organic framework compounds [Ln(BPTA)1.5(Bpy)]·0.5DMF (Ln = Y, Eu, Gd, Tb, Dy; 1a-5a) and [Ln(BPTA)1.5(Phen)]·0.5DMF (Ln = Y, Eu, Gd, Tb, Dy; 1b-5b) were prepared by employing 2,5-bis(prop-2-yn-1-yloxy)terephthalic acid (2,5-BPTA) as the primary ligand and 2,2'-bipyridine (1a-5a) and 1,10-phenanthroline (1b-5b) as the secondary ligands. Single-crystal structural studies on [Gd(BPTA)1.5(Bpy)]·0.5DMF (3a) and [Dy(BPTA)1.5(Phen)]·0.5DMF (5b) indicated that the compounds have a two-dimensional structure. The Y compound exhibits blue emission, and the other compounds exhibit emission in the expected regions (λex = 350 nm). White light emission was achieved by careful mixing of the red (Eu3+) and green (Tb3+) components in the blue emitting Y compound. Thus, Y0.96Tb0.02Eu0.02 (bpy) and Y0.939Tb0.06Eu0.001 (phen) were found to show white emission when excited using a wavelength of 350 nm. The introduction of N-N-containing ancillary ligands (i.e., bpy and phen) increased the overall quantum yield (QY) of white light emission to 31% and 43%, respectively. The high QY observed for the Tb and Eu compounds was found to be sensitive and selective for the fluorometric detection of azinphos-methyl pesticide and trinitrophenol (TNP) in an aqueous medium at the ppb level. The same behaviour was observed when utilising the compounds as onsite paper strip sensors. Their magnetic properties were also studied, revealing for the Tb and Dy derivatives slow relaxation of the magnetisation at low temperature. The present study highlights the usefulness of rigid π-conjugated molecules such as 2,2'-bipyridine and 1,10-phenanthroline in enhancing the many utilities of rare-earth-containing MOFs towards white light emission, the sensing of harmful and dangerous substances and magnetic properties.

Selective Luminescence Turn-On-Based Sensing of Phosphate in the Presence of Other Interfering Anions Using a Heterobimetallic (3d-4d) MOF with an Acidic Pocket

A luminescent metal-organic framework with the molecular formula [YMn_1.5(C₇N₁H₃O₅)₃(H₂O)₆]·11H₂O, 1 {where C₇N₁H₃O₅ = chelidamate}, was synthesized by a hydrothermal method by employing chelidamic acid as an organic ligand and Y(III) and Mn(II) as metal ions. A two-dimensional heterobimetallic structure with phenolic hydroxyl-functionalized pockets was revealed by single-crystal X-ray diffraction analysis of compound 1. PXRD, TGA, IR, BET analysis, and UV-vis spectroscopy were used for the thorough characterization of compound 1. Upon excitation at 280 nm, compound 1 shows bright blue emission, which was utilized for the selective and sensitive turn-on detection of the PO₄^3- ion. Based on Bronsted-Lowry acid-base interactions, the photoluminescence of compound 1 was enhanced in the presence of very low concentrations of the aforementioned anion. The mechanism behind the detection of the phosphate ion has been explored in detail. It was seen that the PO₄^3- anion entered the hydroxyl-functionalized pockets of compound 1 and stabilized the aromatic portion of compound 1 via molecular-level interactions through acid-base interactions. These molecular-level interactions are responsible for the enhancement of the photoluminescence intensity of compound 1 after the incorporation of phosphate ions by reducing the nonradiative transitions. These phenomena were also confirmed by time-correlated single photon counting (TCSPC) measurement, which shows that the excited-state lifetime increased with the increase in addition of phosphate anions. The calculated limit of detection (LOD) of 1 was 19.55 ppb for phosphate (PO₄^3-), which was significantly lesser than the recommended level for the PO₄^3-anion toward the human body. The luminescence enhancement coefficient, K_SV, value was also much higher than those of other reported metal-organic frameworks.

Metal-Organic Frameworks in Agriculture

Agrochemicals, which are crucial to meet the world food qualitative and quantitative demand, are compounds used to kill pests (insects, fungi, rodents, or unwanted plants). Regrettably, there are some important issues associated with their widespread and extensive use (e.g., contamination, bioaccumulation, and development of pest resistance); thus, a reduced and more controlled use of agrochemicals and thorough detection in food, water, soil, and fields are necessary. In this regard, the development of new functional materials for the efficient application, detection, and removal of agrochemicals is a priority. Metal-organic frameworks (MOFs) with exceptional sorptive, recognition capabilities, and catalytical properties have very recently shown their potential in agriculture. This Review emphasizes the recent advances in the use of MOFs in agriculture through three main views: environmental remediation, controlled agrochemical release, and detection of agrochemicals.

Metal-Organic Frameworks-Based Sensors for Food Safety

Food contains a variety of poisonous and harmful substances that have an impact on human health. Therefore, food safety is a worldwide public concern. Food detection approaches must ensure the safety of food at every step of the food supply chain by monitoring and evaluating all hazards from every single step of food production. Therefore, early detection and determination of trace-level contaminants in food are one of the most crucial measures for ensuring food safety and safeguarding consumers' health. In recent years, various methods have been introduced for food safety analysis, including classical methods and biomolecules-based sensing methods. However, most of these methods are laboratory-dependent, time-consuming, costly, and require well-trained technicians. To overcome such problems, developing rapid, simple, accurate, low-cost, and portable food sensing techniques is essential. Metal-organic frameworks (MOFs), a type of porous materials that present high porosity, abundant functional groups, and tunable physical and chemical properties, demonstrates promise in large-number applications. In this regard, MOF-based sensing techniques provide a novel approach in rapid and efficient sensing of pathogenic bacteria, heavy metals, food illegal additives, toxins, persistent organic pollutants (POPs), veterinary drugs, and pesticide residues. This review focused on the rapid screening of MOF-based sensors for food safety analysis. Challenges and future perspectives of MOF-based sensors were discussed. MOF-based sensing techniques would be useful tools for food safety evaluation owing to their portability, affordability, reliability, sensibility, and stability. The present review focused on research published up to 7 years ago. We believe that this work will help readers understand the effects of food hazard exposure, the effects on humans, and the use of MOFs in the detection and sensing of food hazards.

Development of a SPE/GC-MS method for the determination of organophosphorus pesticides in food samples using syringe filters packed by GNP/MIL-101(Cr) nanocomposite

In this study, we report the synthesis and application of a nanocomposite comprising metal-organic framework MIL-101(Cr) and graphene nanopowder (GNP) as a promising sorbent for the extraction of organophosphorus pesticides (OPPs) in juices, water, vegetables and honey samples. A syringe filter, for the first time, was used to host the synthesized nanocomposite and extract the OPPs followed by GC-MS analysis. Different characterization methods including XRD, FTIR, TGA, BET and SEM were employed to confirm the formation of studied nanocomposite. The results indicated that the GNP/MIL-101(Cr) could provide higher capacity for adsorption of OPPs and lower detection limit compared to pristine MIL-101(Cr). The detection limits were 0.005 to 15.0 µg/Kg and the linear range found between 0.05 and 400 µg/Kg. The proposed method showed very good repeatability with the RSD values ranging from 2.9% to 7.1%. The recoveries were between 84% -110% with the spiked levels of 2.0-100.0 µg/Kg.

Efficient chemosensors for toxic pollutants based on photoluminescent Zn(ii) and Cd(ii) metal-organic networks

Optical sensors with high sensitivity and selectivity, as important analytical tools for chemical and environmental research, can be realized by straightforward synthesis of luminescent one-, two- and three-dimensional Zn(ii) and Cd(ii) crystalline coordination arrays (CPs and MOFs). In these materials with emission centers typically based on charge transfer and intraligand emissions, the quantitative detection of specific analytes, as pesticides or anions, is probed by monitoring real-time changes in their photoluminescence and color emission properties. Pesticides/herbicides have extensive uses in agriculture and household applications. Also, a large amount of metal salts of cyanide is widely used in several industrial processes such as mining and plastic manufacturing. Acute or chronic exposure to these compounds can produce high levels of toxicity in humans, animals and plants. Due to environmental concerns associated with the accumulation of these noxious species in food products and water supplies, there is an urgent and growing need to develop direct, fast, accurate and low-cost sensing methodologies. In this critical frontier, we discuss the effective strategies, chemical stability, luminescence properties, sensitivity and selectivity of recently developed hybrid Zn(ii)/Cd(ii)-organic materials with analytical applications in the direct sensing of pesticides, herbicides and cyanide ions in the aqueous phase and organic solvents.

Nanomaterial-Enabled Sensors and Therapeutic Platforms for Reactive Organophosphates

Unintended exposure to harmful reactive organophosphates (OP), which comprise a group of nerve agents and agricultural pesticides, continues to pose a serious threat to human health and ecosystems due to their toxicity and prolonged stability. This underscores an unmet need for developing technologies that will allow sensitive OP detection, rapid decontamination and effective treatment of OP intoxication. Here, this article aims to review the status and prospect of emerging nanotechnologies and multifunctional nanomaterials that have shown considerable potential in advancing detection methods and treatment modalities. It begins with a brief introduction to OP types and their biochemical basis of toxicity followed by nanomaterial applications in two topical areas of primary interest. One topic relates to nanomaterial-based sensors which are applicable for OP detection and quantitative analysis by electrochemical, fluorescent, luminescent and spectrophotometric methods. The other topic is directed on nanotherapeutic platforms developed as OP remedies, which comprise nanocarriers for antidote drug delivery and nanoscavengers for OP inactivation and decontamination. In summary, this article addresses OP-responsive nanomaterials, their design concepts and growing impact on advancing our capability in the development of OP sensors, decontaminants and therapies.

A luminescent Cd(ii) coordination polymer as a multi-responsive fluorescent sensor for Zn2+, Fe3+ and Cr2O72− in water with fluorescence enhancement or quenching

A luminescent Cd(ii) coordination polymer can act as a multi-responsive sensor for efficiently detecting Zn²⁺, Fe³⁺ and Cr₂O₇²⁻ ions.

Recent advances in metal-organic frameworks for pesticide detection and adsorption

The large-scale use of pesticides such as organophosphate pesticides (OPPs) and organochlorine pesticides (OCPs) has led to serious environmental problems worldwide, and their high toxicity could cause serious damage to human health. It is crucial to remove and track them precisely in the environment and food resources. As novel nanomaterials, metal-organic frameworks (MOFs) have attracted significant attention in the fields of adsorption and luminescence sensing due to their rich topology, tunable pore size and shape, high surface area, and abundant active sites. Luminescent metal-organic frameworks (LMOFs) have sprung up as great potential chemical sensors to detect pesticides with fast response, high sensitivity, high selectivity and easy operation. Therefore, in this highlight, we focus on recent progress of MOFs in sensing and adsorbing pesticides, as well as in the possible mechanism of sensing, so as to attract more attention to pesticide detection and adsorption.

Dramatic luminescence signal from a Co(ii)-based metal–organic compound due to the construction of charge-transfer bands with Al3+ and Fe3+ ions in water: steady-state and time-resolved spectroscopic studies

A Co(ii)-based metal–organic compound exhibits luminescence turn-on by Al³⁺ and quenching by Fe³⁺ due to the formation of charge-transfer complexes/adducts.

Luminescent metal–organic framework-based phosphor for the detection of toxic oxoanions in an aqueous medium

Compound 1 has been utilized for the luminescence based visible detection of chromate, permanganate and phosphate ions in aqueous medium.

Zn(ii)-based coordination polymer: An emissive signaling platform for the recognition of an explosive and a pesticide in an aqueous system

A new emissive Zn(ii)-based coordination polymer (Zn-CP) bearing paddle-wheel clusters has been developed and the same has been demonstrated to have potential for recognising a nitroaromatic-based explosive (TNP) and a pesticide (2,6-DCNA) in aqueous solution. The structural integrity of this newly developed 2D material was established through single-crystal analysis, whereas the stability of Zn-CP in aqueous medium after the recognition process was investigated by the powder-XRD technique. A combination of experimental and theoretical studies revealed that the change in fluorescence intensity of Zn-CP while interacting with TNP and 2,6-DCNA was possibly due to simultaneous operation of PET and FRET. Experimentally, it was also established that Zn-CP can be reused in up to three cycles for the detection of TNP and 2,6-DCNA.

A Water-Stable Luminescent Metal-Organic Framework for Rapid and Visible Sensing of Organophosphorus Pesticides

Metal-organic frameworks (MOFs) have shown considerable prospects for sensing pesticide residues. However, the low stability of MOFs in water hinders them from testing food and environmental samples. Herein, we report an easy and cost-efficient synthesis of a water-stable zirconium luminescent MOF (Zr-LMOF) and its application for rapid, sensitive, and in situ detection of organophosphorous pesticides (OPPs). The Zr-MOF is prepared using Zr(IV) and 1,2,4,5-tetrakis(4-carboxyphenyl)benzene. The synthesized Zr-LMOF rapidly absorbs trace amounts of OPP parathion-methyl and indicates its presence. A low limit of detection of 0.115 μg kg^-1 (0.438 nM) with a wide linear range from 70 μg kg^-1 to 5.0 mg kg^-1 was achieved. Satisfactory recoveries ranging from 78% to 107% were obtained for spiked food and environmental samples. Further, the Zr-LMOF was applied to imitate rapid and in situ imaging detection of pesticide residue on fresh produce nondestructively; visual signals appeared under ultraviolet light within 5 min. These results suggest that the Zr-LMOF has the potential for low-cost, rapid, and in situ imaging detection of OPPs contamination via easy-to-read visual signal.

Effect of charge transfer and structural rigidity on divergent luminescence response of a metal organic framework towards different metal ions: luminescence lifetime decay experiments and DFT calculations

We have thoroughly studied the luminescence behaviour of a cadmium based MOF, [Cd(C12N2H8)(C7N1O4H3)] {C12N2H8 = 1,10-phenanthroline, C7N1O4H3 = 2,5-pyridine dicarboxylate}, 1. Both steady-state and time-resolved luminescence spectroscopic experiments were performed to understand the dissimilar responses of compound 1 towards different metal ions in aqueous medium. Upon excitation at 280 nm, compound 1 showed a luminescence spectrum centered at 365 nm, which exhibited a three-fold turn-on in the presence of a trace amount of Zn2+ in aqueous solution, whereas in the presence of Co2+, Hg2+, Ni2+, Fe2+ and Cu2+ the luminescence of compound 1 got largely quenched. Compound 1 did not show any response in the presence of other common metal ions such as K+, Mg2+, Na+, Mn2+, and Cr3+. By analysing all the experimental results, we successfully explained the versatile luminescence behaviour of compound 1. The turn-on of luminescence in the presence of Zn2+ ions was due to coordination bond formation and enhancement of the rigidity of compound 1 which resulted in the reduction of non-radiative decay processes to a large extent. The quenching of luminescence in the presence of transition metal ions was found to be static in nature, and was due to the possibility of ligand to metal charge transfer using the vacant d-orbital of the metal ions. In the case of Hg2+ which is a closed cell heavy metal ion, the quenching of luminescence was also static in nature and was due to a two-way charge transfer mechanism. We have also performed density functional theory calculations and obtained supportive results for the proposed mechanisms of luminescence turn-on and quenching. Moreover, compound 1 could be established as a selective and efficient sensor of Zn2+ in aqueous solution even in the presence of Cd2+ and other metal ions.

Selective sensing and visualization of pesticides by ABW-type metal–organic framework based luminescent sensors

A new ABW-type luminescent metal–organic framework (MOF) namely (H₃O)[Zn₂L(H₂O)]·3NMP·6H₂O (1), constructed with eco-friendly Zn²⁺ and the multicarboxylate intraligand (LH₅) was designed, synthesized and fully characterized by X-ray single-crystal diffraction, steady-state absorption and emission spectroscopy, and SEM observations. The MOF-based suspension sensor 1 (NMP) demonstrated high sensitivity to low-concentration pesticides of chlorothalonil (CTL), nitrofen (NF), trifluralin (TFL), and 2,6-dichloro-4-nitroaniline (DCN), which was assigned to the synergistic effect of the photoinduced electron transfer and the fluorescence resonance energy transfer. With the highest luminescent detection efficiency (K_SV up to 11.194 μmol⁻¹ and LOD down to 2.93 ppm) to DCN, 1 (NMP) was successfully applied for the selective sensing of DCN. The MOF-based film sensor 1 (film) illustrated the selective visualization sensing of trace amounts of DCN. In addition, based on the high saturated vapor pressure of TFL and the unique bathochromic shift effect to the emission maxima of 1, the MOF-based luminescent vapor sensing device 1 (LED) successfully exhibited operability for sensing of TFL vapor. The results illustrated a feasible approach to construct new MOF-based luminescent sensors for selective sensing and visualization of pesticides.

A novel ABW-type luminescent metal–organic framework was applied for selective visualization sensing of trace amounts of 2,6-dichloro-4-nitroaniline and vapor sensing of trifluralin.

Zinc(ii)–organic framework as a multi-responsive photoluminescence sensor for efficient and recyclable detection of pesticide 2,6-dichloro-4-nitroaniline, Fe(iii) and Cr(vi)

A stable Zn-MOF acts as a multi-responsive luminescent sensor for efficient and recyclable detection of organochlorine pesticide 2,6-dichloro-4-nitroaniline, Fe(iii) and Cr(vi) with high selectivity and sensitivity.

Potential Utility of Metal-Organic Framework-Based Platform for Sensing Pesticides

The progress in modern agricultural practices could not have been realized without the large-scale contribution of assorted pesticides (e.g., organophosphates and nonorganophosphates). Precise tracking of these chemicals has become very important for safeguarding the environment and food resources owing to their very high toxicity. Hence, the development of sensitive and convenient sensors for the on-site detection of pesticides is imperative to overcome practical limitations encountered in conventional methodologies, which require skilled manpower at the expense of high cost and low portability. In this regard, the role of novel, advanced functional materials such as metal-organic frameworks (MOFs) has drawn great interest as an alternative for conventional sensory systems because of their numerous advantages over other nanomaterials. This review was organized to address the recent advances in applications of MOFs for sensing various pesticides because of their tailorable optical and electrical characteristics. It also provides in-depth comparison of the performance of MOFs with other nanomaterial sensing platforms. Further, we discuss the present challenges (e.g., potential bias due to instability under certain conditions, variations in the diffusion rate of the pesticide, chemical interferences, and the precise measurement of luminesce quenching) in developing robust and sensitive sensors by using tailored porosity, functionalities, and better framework stability.

Coordination polymer-derived nano-sized zinc ferrite with excellent performance in nitro-explosive detection

Herein, a mixed metal coordination polymer, {(H₂pip)[Zn_1/3Fe_2/3(pydc-2,5)₂(H₂O)]·2H₂O} 1 {where H₂pip = piperazinediium and pydc-2,5 = pyridine-2,5-dicarboxylate}, was successfully synthesized using a hydrothermal technique. To confirm the structure and phase purity of 1, single crystals of an isomorphous pure Fe compound, {(H₂pip)[Fe(pydc-2,5)₂(H₂O)]·2H₂O} 1a, were synthesized based on similar synthetic conditions. Single crystal X-ray data of 1a confirmed the one-dimensional anionic metal-organic coordination polymer hydrogen bonded with protonated piprazine (piperazinediium) and lattice water molecules. The phase purity of 1 and 1a were confirmed via powder X-ray diffraction. Compound 1 was systematically characterized using IR, TGA, SEM, and EDX elemental mapping analysis. Compound 1 was used as a single source precursor for the preparation of nano-sized ZnFe₂O₄via thermal decomposition. The as-obtained ZnFe₂O₄ was fully characterized using PXRD, SEM, TEM, and EDX elemental mapping analysis. It was found that ZnFe₂O₄ was formed in its pure form with particle size in the nano-dimension. The aqueous dispersion of nano-sized ZnFe₂O₄ exhibits a strong emission at 402 nm upon excitation at 310 nm. This emissive property was employed for luminescence-based detection of nitroaromatic explosives in an aqueous medium through luminescence quenching for the first time. Importantly, selective detections have been observed for phenolic nitroaromatics based on differential luminescence quenching behaviour along with a detection limit of 57 ppb for 2,4,6-trinitrophenol (TNP) in water.