One-step preparation of Fe2 O3 /reduced graphene oxide aerogel as heterogeneous Fenton-like catalyst for enhanced photo-degradation of organic dyes

Ferrocene crosslinked and functionalized chitosan microspheres towards bio-based Fenton-like system for the removal of organic pollutants

Dye-containing wastewater treatment has been a major long-term global challenge. For this purpose, a novel bio-based microspheres (CS-FC) with high specific surface area (63.24 m2·g-1) and nano-channels (17.95 nm) was prepared using chitosan as the framework and ferrocene as a crosslinking active group. CS-FC not only has the ability to rapidly enrich methyl orange (MO) through hydrogen-bonding and electrostatic attraction, but also almost completely degrades it in the presence of H2O2/K2S2O8 through a synergistic radical/non-radical mechanism under the activating effect of ferrocene. Without H2O2/K2S2O8, the maximum MO adsorption capacity of CS-FC is in the range 871-1050 mg·g-1, and conforms to a Langmuir isothermal model with pseudo-second-order kinetics. In the presence of H2O2/K2S2O8, the removal of MO dramatically increased from 32 % to nearly 100 % after incubation for 60 min, due to the simultaneous formation of highly reactive 1O2 and ·OH. The significant contribution from 1O2 endowed CS-FC/H2O2/K2S2O8 with high universality for degrading various organic pollutants (including azo dyes and antibiotics), a wide pH window (2-8), and low sensitivity to co-existing ions. Such cost-effective, recyclable porous bio-based microspheres are suitable for heterogeneous Fenton-like catalysis in organic wastewater treatment that rely on synergistic radical/non-radical reaction pathways.

Oxidized dextran-crosslinked ferrocene-chitosan-PEI composite porous material integrating adsorption and degradation to malachite green

Treating wastewater containing malachite green (MG) using porous materials with both adsorption and degradation functions have become a major challenge in achieving the carbon neutrality goal. Herein by incorporating the ferrocene (Fc) group as a Fenton active center, a novel composite porous material (DFc-CS-PEI) was prepared using chitosan (CS) and polyethyleneimine (PEI) as skeletons and oxidized dextran as a crosslinker. DFc-CS-PEI not only possesses satisfactory adsorption performance to MG but also excellent degradability in the presence of a minor amount of H₂O₂ (3.5 mmol/L) without any additional assistance, due to high specific surface area and active Fc group. The maximum adsorption capacity is ca. 177.73 ± 3.11 mg/g, outperforming most CS-based adsorbents. The removal efficiency of MG is significantly enhanced from 20 % to 90 % as DFc-CS-PEI and H₂O₂ coexist, due to ^·OH-dominated Fenton reaction, and remained in a wide pH range (2.0-7.0). Cl^- exhibits notable suppression on the degradation of MG because of quenching effects. Note that DFc-CS-PEI has a very small iron leaching (0.2 ± 0.015 mg/L), and can be rapidly recycled by simple water-washing, without any harmful chemicals and potential second pollution. Such versatility, high stability, and green recyclability make the as-prepared DFc-CS-PEI a promising porous material for the treatment of organic wastewater.

The Efficient Photocatalytic Degradation of Organic Pollutants on the MnFe2O4/BGA Composite under Visible Light

The MnFe₂O₄/BGA (boron-doped graphene aerogel) composite was prepared by hydrothermal treatment of MnFe₂O₄ particles, boric acid, and graphene oxide. When applied as a photo-Fenton catalyst for the degradation of rhodamine B, the MnFe₂O₄/BGA composite yielded a degradation efficiency much higher than the sum of those of individual MnFe₂O₄ and BGA under identical experimental conditions, indicating a strong synergetic effect established between MnFe₂O₄ and BGA. The catalytic degradation of rhodamine B was proved to follow pseudo first-order kinetics, and the apparent reaction rate constant on the MnFe₂O₄/BGA composite was calculated to be three- and seven-fold that on BGA and MnFe₂O₄, respectively. Moreover, the MnFe₂O₄/BGA composite also demonstrated good reusability and could be reused for four cycles without obvious loss of photocatalytic activity.

Graphene@Metal Nanocomposites by Solution Combustion Synthesis

Graphene (G) and metal-decorated G nanocomposites are among the most promising materials for a wide variety of practical applications, and, therefore, the development of fast and reliable methods for nanocomposite synthesis is an important task. Herein we report the new fast approach for solution combustion synthesis (SCS) of large-area G-metallic nanocomposites in an air atmosphere. The G-based nanocomposites were obtained by a SCS using copper and nickel nitrates, as well as their stoichiometric mixture as the metal source and citric acid as a fuel and carbon source. The G structures started on the catalytic surface of freshly synthesized metallic nanograins during the combustion process and formed large-area free-standing films due to the high-energy and fast synthesis process. We proposed a mechanism of formation of the G-based nanocomposites. The phase compositions, structural features, and magnetization behavior of G@Cu, G@Ni, and G@CuNi nanocomposites are carefully studied and described. G@metal nanocomposites were studied as a material for the creation of a highly effective sensing element of semiconductor gas sensors.

A green synthesis of nanocatalysts based on reduced graphene oxide/magnetic nanoparticles for the degradation of Acid Red 1

Fenton reaction nanocatalysts made of reduced graphene oxide–magnetic nanoparticle 3D composite aerogels for the elimination of organic dyes from aqueous solution.