Enhancement of Nonlinear Optical Properties of Indole Based Dyes through Electron Acceptor and π‐Linker for Dye‐Sensitized Solar Cell Applications

Theoretical, structural, and electronic analyses of pyridin-based dyes for dye-sensitized solar cells applications

CONTEXT

The new series of donor-π-acceptor dyes have been designed using pyridine derivatives as a donor group and thienothiophene as a π-spacer group, which were linked via 10 acceptor groups. The highest occupied molecular orbital energies range from - 6.177 to - 5.786 eV, whereas the lowest unoccupied molecular orbital energies range from - 2.181 to - 3.664 eV. A6 dye has smaller energy gap, lower hardness, higher electrophilicity index, and good photovoltaic performance than other sensitizers. The lowest dihedral angle is observed in A1, A2, A6, A7, and A8 which are appropriate for intramolecular charge transfer between the molecules. The A8 has higher light harvesting efficiency, which increases the photovoltaic efficiency of the designed dye. The A6, A7, and A8 dyes spend less time in the excited state, which means they emit photons more efficiently than other dyes. The interaction between donor to π-spacer (red line) parts of the dyes has the bonding interaction (positive), and π-spacer to acceptor (blue line) parts of the dyes have the bonding and antibonding (negative) behaviours. The dyes A5 and A9 have 305.79 and 357.71 times higher β0 values than urea (0.781 × 10-30 esu) molecules. The spectral properties of the A6 dye strongly affect the structural modification.

METHODS

The density functional theory (DFT) and time-dependent DFT (TD-DFT) approach B3LYP/6-311G (d,p) basic set were used to optimize the designed dyes. All the calculations are performed using Gauss view 6.0 and Gaussian 09 software. The density of state spectrum is plotted using Gauss sum 2.6.

The novel non-fully-fused ring small molecule acceptors: End-capped modification investigation

End-capped modification is an efficacious strategy for developing high-performance acceptor materials. In this paper, the experimentally synthesized A-D-A'-D-A type non-fully-fused ring acceptor IDTBT-4F (R) was used as a reference molecule, and five small molecule acceptors for R1-R5 were investigated by changing R's terminal functional groups. By using DFT/B3PW91/6-31G (d,p) method, the ground-state structures of all molecules were studied. The absorption spectra of these acceptors were gained by the TD-DFT/MPW1PW91/6-31G (d,p) approach. Meanwhile, the charge density difference and transition density matrix were analyzed effectively. It can be observed that, compared to the R molecule, all developed molecules exhibited narrower energy gaps, larger absorption wavelengths, more red-shifted absorption spectra, lower excitation energies, higher dipole moment and greater electron-accepting capacity. The strategy of functional group substitution is superior to halogen substitution in improving the aforementioned parameters. Both terminal π-extension and end-group chlorination strategies can synergistically enhance molecular performance. In addition, we also calculated the electron mobility of the dimers constructed by all the molecules, among which R1 and R4 molecules designed with -COOCH3 functional group substitution and R2 molecule with terminal chlorination achieved superior electron mobility compared to R molecule due to their significant electronic coupling. Overall, the study shows that the designed molecules can be highly effective candidates for applications of organic solar cells.

High-Efficiency and Low-Energy-Loss Organic Solar Cells Enabled by Tuning the End Group Modification of the Terthiophene-Based Acceptor Molecules to Enhance Photovoltaic Properties

In the current study, six nonfullerene small acceptor molecules were designed by end-group modification of terminal acceptors. Density functional theory calculations of all designed molecules were performed, and optoelectronic properties were computed by employing different functionals. Every constructed molecule has a significant bathochromic shift in the maximum absorption value (λmax) except AM6. AM1-AM4 molecules represented a narrow band gap (Eg) and low excitation energy values. The AM1-AM4 and AM6 molecules have higher electron mobility. Comparing AM2 to the reference molecule reveals that AM2 has higher hole mobilities. Compared to the reference molecule, all compounds have excellent light harvesting efficiency values compared to AM1 and AM2. The natural transition orbital investigation showed that AM5 and AM6 had significant electronic transitions. The open-circuit voltage (Voc) values of the computed molecules were calculated by combining the designed acceptor molecules with PTB7-Th. In light of the findings, it is concluded that the designed molecules can be further developed for organic solar cells (OSCs) with superior photovoltaic abilities.

Through structural isomerism: positional effect of alkyne functionality on molecular optical properties

Literature studies on the effects of alkyne functionality in manipulating the optical properties of donor-π-acceptor-type molecular scaffolds have been scarce compared to those on the alkene functional group. Here, two structurally isomeric donor-acceptor (D-A) dyes were synthesized to study the positional effect of alkyne functionality (triple bond) on their optical, electrochemical and charge generation properties in order to design efficient dyes for possible application in dye sensitized solar cells (DSSCs). These dyes, named CAPC and PACC, contain carbazole and cyanoacrylic acid as the donor and acceptor units, respectively, and the π-conjugation length within the molecules was controlled by the introduction of an alkyne group. The D-π-A design was followed in designing CAPC with the alkyne serving as the π-spacer, while in PACC, alkyne was placed on the donor, which was directly in conjugation with the acceptor. This rendered equal conjugation lengths within the designed dyes. With the help of photophysical characterizations, it was concluded that CAPC featured better characteristics for a DSSC dye than PACC. Our conclusions were further supported by the results of transient absorption spectroscopy, electrochemical analysis, fluorescence lifetime studies and density functional theory.

Tuning the optoelectronic properties of triphenylamine (TPA) based small molecules by modifying central core for photovoltaic applications

Small donor molecules based on fused ring acceptors exhibit encouraging photovoltaic properties and expeditious advancement in organic solar cells. Central core modification of non-fullerene acceptor materials is a favorable methodology to enhance electronic properties and efficiency for OSCs. Herein, four new donor molecules, namely, BDTM1, PYRM2, ANTM3, and NM4 are designed with a strong donor moiety triphenylamine, tetracyanobutadiene as acceptor unit, and thiophene as spacer linked to a modified central core. Geometric parameters, optical, electrical properties, effect of central core modification on tailored molecules BDTM1-NM4 are investigated and compared with reference DPPR. DFT together with TDDFT approaches using MPW1PW91 functional is used to study key parameters like absorption maximum (λ_max), frontier molecular approach, ionization potential, electron affinity, the density of states, transition density matrix along with open-circuit voltage (V_OC), dipole moment and reorganization energy. Among all these molecules, BDTM1 shows maximum calculated absorption λ_max (817 nm) and the lowest band gap (2.54 eV). This bathochromic shift in BDTM1 is due to the presence of 4,8-dimethoxy-2,6-di-2-thienylbenzodithiophene as a strong electron-withdrawing group. Computed reorganization energies (RE) shows that BDTM1 has the highest hole and electron mobility among all designed molecules. Combination of BDTM1 donor and PC₆₁BM acceptor further verifies charge transfer and their interaction. The results illustrate that designed donor molecules (BDTM1-NM4) are better in performance and are recommended for experimentation to develop efficient OSCs. Four new donor molecules, namely, BDTM1, PYRM2, ANTM3, and NM4 are designed with a strong donor moiety triphenylamine, tetracyanobutadiene as acceptor unit and thiophene as spacer linked to a modified central core. Geometric parameters, optical, electrical properties, effect of central core modification on tailored molecules BDTM1-NM4 are investigated and compared with reference DPPR.

Theoretical Study on the Nonlinear Optical Property of Boron Nitride Nanoclusters Functionalized by Electron Donating and Electron Accepting Groups

The influence of donor-acceptor (D-A) groups on the nonlinear optical (NLO) property of B₁₂N₁₂ functionalized nanocluster has been investigated by density functional theory. We study the effect of bonding of three electron acceptor ligands (CN, COOH, and NO₂) and three donor ligands (NH₂, N(CH₃)₂, and PhNH₂) positioned at opposite ends of B₁₂N₁₂ nanocluster in the gas phase. The result reveals that the complexation of D-A groups on the B₁₂N₁₂ nanocluster is energetically favorable and significantly narrowed the HOMO-LUMO gaps. The functionalization of D-A groups lead to an extremely large first hyperpolarizability value. Our survey reports the strongest NLO responses found in PhNH₂-B₁₂N₁₂-PhCN cluster (1882.47 × 10^-30 esu), whereas centrosymmetric B₁₂N₁₂ cluster yields a zero hyperpolarizability value. Designed systems are analyzed through the HOMO-LUMO gap, frontier molecular orbital, hyperpolarizability, Δr index, transition dipole moment density, density of states (DOS), and molecular electrostatic potential. The obtained results are well correlated with the computed absorption spectra of the molecule. The results demonstrate that phenyl ring incorporated D-A groups amplify the NLO response to a larger extent. The significant first hyperpolarizability arises due to charge transfer from the donor to the acceptor moiety. As a whole, this theoretical work provides a direction to researchers that the right choice of substitution can considerably impact the nonlinear optical property of BN nanoclusters.

The role of π-linkers and electron acceptors in tuning the nonlinear optical properties of BODIPY-based zwitterionic molecules

Intramolecular charge transfer process can play a key role in developing strong nonlinear optical (NLO) response in a molecule for technological application. Herein, two series of boron dipyrromethene (BODIPY)-based push–pull systems have been designed with zwitterionic donor–acceptor groups, and their NLO properties have been evaluated using a density functional theory-based approach. Different π-conjugated linkers and electron acceptor groups were used to understand their roles in tuning the NLO properties. The molecules were analyzed through HOMO–LUMO gaps, frontier molecular orbitals, polarizabilities, hyperpolarizabilities, Δr indices, transition dipole moment densities, ionization potentials, electron affinities and reorganization energies for holes and electrons. These observations correlated well with the computed absorption spectra of the molecules. It is found that with the introduction of different π-linkers in the molecule, planarity is maintained and the HOMO–LUMO gap is systematically decreased, which leads to a large NLO response. It was noted that the electronic absorption wavelength maxima were found in the near-infrared region (934–1650 nm). The results show that compared to the pyridinium acceptor group, the imidazolium acceptor group in the BODIPY systems amplifies the NLO response to a larger extent. It is also observed that the BODIPY-based dye with an imidazolium acceptor and thienothiophene π-linker shows the highest first hyperpolarizability value of 3194 × 10⁻³⁰ esu. Furthermore, the charge transfer occurs in the z-direction, as the z-component of the first hyperpolarizability is the dominant factor in this system. Here, the designed molecules show a characteristic reorganisation energy value, which is a deciding factor in the rate of hole/electron transport for favourable intermolecular coupling. As a whole, this theoretical work highlights that π-conjugated linkers and electron acceptor groups can be used judiciously to design new molecular systems for optoelectronic applications.

BODIPY-based zwitterionic molecules with pyridinium and imidazolium electron acceptors and thienothiophene π-linkers reveal significant first hyperpolarizability.