A Novel Rose‐Like CuS/Bi 2 WO 6 Composite for Rhodamine B Degradation

Recent Progress in Photocatalytic Degradation of Water Pollution by Bismuth Tungstate

Photocatalysis has emerged as a highly promising, green, and efficient technology for degrading pollutants in wastewater. Among the various photocatalysts, Bismuth tungstate (Bi2WO6) has gained significant attention in the research community due to its potential in environmental remediation and photocatalytic energy conversion. However, the limited light absorption ability and rapid recombination of photogenerated carriers hinder the further improvement of Bi2WO6's photocatalytic performance. This review aims to present recent advancements in the development of Bi2WO6-based photocatalysts. It delves into the photocatalytic mechanism of Bi2WO6 and summarizes the achieved photocatalytic characteristics by controlling its morphology, employing metal and non-metal doping, constructing semiconductor heterojunctions, and implementing defective engineering. Additionally, this review explores the practical applications of these modified Bi2WO6 photocatalysts in wastewater purification. Furthermore, this review addresses existing challenges and suggests prospects for the development of efficient Bi2WO6 photocatalysts. It is hoped that this comprehensive review will serve as a valuable reference and guide for researchers seeking to advance the field of Bi2WO6 photocatalysis.

Hierarchical Ultrathin Layered GO-ZnO@CeO2 Nanohybrids for Highly Efficient Methylene Blue Dye Degradation

Highly efficient interfacial contact between components in nanohybrids is a key to achieving great photocatalytic activity in photocatalysts and degradation of organic model pollutants under visible light irradiation. Herein, we report the synthesis of nano-assembly of graphene oxide, zinc oxide and cerium oxide (GO-ZnO@CeO₂) nanohybrids constructed by the hydrothermal method and subsequently annealed at 300 °C for 4 h. The unique graphene oxide sheets, which are anchored with semiconducting materials (ZnO and CeO₂ nanoparticles), act with a significant role in realizing sufficient interfacial contact in the new GO-ZnO@CeO₂ nanohybrids. Consequently, the nano-assembled structure of GO-ZnO@CeO₂ exhibits a greater level (96.66%) of MB dye degradation activity than GO-ZnO nanostructures and CeO₂ nanoparticles on their own. This is due to the thin layers of GO-ZnO@CeO₂ nanohybrids with interfacial contact, suitable band-gap matching and high surface area, preferred for the improvement of photocatalytic performance. Furthermore, this work offers a facile building and cost-effective construction strategy to synthesize the GO-ZnO@CeO₂ nanocatalyst for photocatalytic degradation of organic pollutants with long-term stability and higher efficiency.

Preparation and Photocatalytic Performance for Degradation of Rhodamine B of AgPt/Bi4Ti3O12 Composites

Loading a noble metal on Bi₄Ti₃O₁₂ could enable the formation of the Schottky barrier at the interface between the former and the latter, which causes electrons to be trapped and inhibits the recombination of photoelectrons and photoholes. In this paper, AgPt/Bi₄Ti₃O₁₂ composite photocatalysts were prepared using the photoreduction method, and the effects of the type and content of noble metal on the photocatalytic performance of the catalysts were investigated. The photocatalytic degradation of rhodamine B (RhB) showed that the loading of AgPt bimetallic nanoparticles significantly improved the catalytic performance of Bi₄Ti₃O₁₂. When 0.10 wt% noble metal was loaded, the degradation rate for RhB of Ag_0.7Pt_0.3/Bi₄Ti₃O₁₂ was 0.027 min⁻¹, which was respectively about 2, 1.7 and 3.7 times as that of Ag/Bi₄Ti₃O₁₂, Pt/Bi₃Ti₄O₁₂ and Bi₄Ti₃O_12. The reasons may be attributed as follows: (i) the utilization of visible light was enhanced due to the surface plasmon resonance effect of Ag and Pt in the visible region; (ii) Ag nanoparticles mainly acted as electron acceptors to restrain the recombination of photogenerated electron-hole pairs under visible light irradiation; and (iii) Pt nanoparticles acted as electron cocatalysts to further suppress the recombination of photogenerated electron-hole pairs. The photocatalytic performance of Ag_0.7Pt_0.3/Bi₄Ti₃O₁₂ was superior to that of Ag/Bi₄Ti₃O₁₂ and Pt/Bi₃Ti₄O₁₂ owing to the synergistic effect between Ag and Pt nanoparticles.