Synthesis, Characterization and Application of V 2 O 5 /S‐Doped Graphitic Carbon Nitride Nanocomposite for Removing of Organic Pollutants

Research progress of vanadium pentoxide photocatalytic materials

Photocatalytic reactions convert solar energy into chemical energy through a clean and green reaction process. Photocatalytic technology based on semiconductor materials provides us with a new idea in energy utilization and environmental governance. It was found that vanadium pentoxide (V₂O₅) has a narrow band gap, wide response range in the visible region, high oxygen density in the V₂O₅ lattice, high oxidation state of V⁵⁺, small energy requirement, and superior catalytic activity in partial oxidation. Therefore, the utilization rate of sunlight and photocatalytic oxidation can be greatly improved using V₂O₅ materials. However, the narrow band gap of V₂O₅ also makes it easier for the photogenerated electrons and holes to recombine in the excited state, and the stored energy is instantly consumed by carrier recombination. Therefore, how to promote the carrier separation of V₂O₅ and improve the photocatalytic efficiency are the key problems to be solved. Herein, several methods to improve the photocatalytic performance of V₂O₅ are reviewed, including metallic ion doping, non-metallic ion doping, semiconductor recombination, and noble metal deposition. Finally, it is suggested that future research directions should focus on a variety of modification methods simultaneously to promote photocatalytic efficiency and lower the cost, which will enable V₂O₅ to have a broad development prospect in the field of photocatalysis.

Polyethylene glycol functionalized reduced graphene oxide coupled with zinc oxide composite adsorbent for removal of phenolic wastewater

The development of agricultural activities and industrialization recently has various adverse impacts on living organisms. The ever-increasing problem of organic pollution has been an environmental concern to the community. Among these, phenolic pollutants like 2,4-dichlorophenol (2,4-DCP), phenol, 2-chlorophenol (2-CP), and bisphenol-A (BPA) are priority toxic pollutants that are continuously released into environment from many industries. In this work, a biocompatible zinc oxide incorporated polyethylene glycol functionalized reduced graphene oxide composite (RGO-PEG-ZnO) was synthesized and explored for the adsorptive removal of toxic phenolic pollutants from water. The optimized adsorption parameters were solution pH 7, adsorption time 60 min, temperature 25 °C, and dosage 0.25 g/L. The isotherms were well fitted by the Langmuir model for BPA and phenol, whereas for 2-CP, and 2,4-DCP, Freundlich was the best-fitted model, and the maximum uptake of BPA, phenol, 2-CP, and 2,4-DCP were 485.756, 511.248, 531.804, 570.641 mg/g, respectively. The kinetic data for all the phenolic pollutants follow the pseudo-second-order model. The thermodynamic analysis shows that Gibb's free energy (ΔG^o) values for all the pollutants were negative, confirming that the process was spontaneous. The positive values of change in enthalpy (ΔH^o) 28.261, 37.205, 46.182, and 61.682 kJ/mol for BPA, phenol, 2-CP, and 2,4-DCP, respectively, confirm that the above adsorption process was endothermic. The composite can be used for up to five cycles with a small reduction in the removal percentage. Adsorption performance of the synthesized composite for synthetic industrial effluents shows that up to 86.54% removal occurred in 45 min adsorption time. Based on the remarkably rapid adsorption and high adsorption capacity, RGO-PEG-ZnO composite can be considered an efficient adsorbent for treating phenolic pollutants from wastewater.

Application of visible light active photocatalysis for water contaminants: A review

Organic water pollutants are ubiquitous in the natural environment arising from domestic products as well as current and legacy industrial processes. Many of these organic water pollutants are recalcitrant and only partially degraded using conventional water and wastewater treatment processes. In recent decades, visible light active photocatalyst has gained attention as a non-conventional alternative for the removal of organic pollutants during water treatment, including industrial wastewater and drinking water treatment. This paper reviews the current state of research on the use of visible light active photocatalysts, their modified methods, efficacy, and pilot-scale applications for the degradation of organic pollutants in water supplies and waste streams. Initially, the general mechanism of the visible light active photocatalyst is evaluated, followed by an overview of the major synthesis techniques. Because few of these photocatalysts are commercialized, particular attention was given to summarizing the different types of visible light active photocatalysts developed to the pilot-scale stage for practical application and commercialization. The organic pollutant degradation ability of these visible light active photocatalysts was found to be considerable and in many cases comparable with existing and commercially available advanced oxidation processes. Finally, this review concludes with a summary of current achievements and challenges as well as possible directions for further research. PRACTITIONER POINTS: Visible light active photocatalysis is a promising advanced oxidation process (AOP) for the reduction of organic water pollutants. Various mechanisms of photocatalysis using visible light active materials are identified and discussed. Many recent photocatalysts are synthesized from renewable materials that are more sustainable for applications in the 21st century. Only a small number of pilot-scale applications exist and these are outlined in this review.

Synthesis of novel epichlorohydrin cross-linked β-cyclodextrin functionalized with reduced graphene oxide composite adsorbent for treatment of phenolic wastewater

A novel composite consisting reduced graphene oxide-functionalized beta-cyclodextrin epichlorohydrin polymer (RGO-βCD-ECH) was synthesized for the treatment of phenolic wastewater. Batch study of phenolic pollutants (2,4-dichlorophenol, 2-chlorophenol, and phenol) was analyzed using the synthesized composite as an adsorbent from an aqueous solution. The optimized parameters were temperature 25 °C, adsorption time 60 min, solution pH 7, and dosage 0.25 g/L. The isotherm data were more suitably fitted by the Langmuir isotherm model. The maximum uptake for 2,4-dichlorophenol, phenol, and 2-chlorophenol was 702.853, 659.475, and 674.155 mg/g, respectively, at 25 ± 1 °C. The kinetic data for all the phenolic pollutants follow the pseudo-second-order model, and the rate was controlled by film diffusion. Thermodynamic data revealed that the process of removing phenolic pollutants is spontaneous and endothermic. The composite can be used up to five cycles with a small reduction in the removal. Adsorption performance of the synthesized composite for synthetic industrial effluents shows that up to 78% removal occurred in 60 min adsorption time. Based on the remarkably rapid adsorption and high adsorption capacity, the synthesized composite can be considered an efficient adsorbent for treating phenolic pollutants from wastewater.