Spectrophotometric Determination of Trace Amounts of Benzotriazole in Aqueous Solutions Using Gold Nanoparticles: Artificial Neural Network Modeling

Rapid and naked-eye colorimetric detection of ultra trace sumatriptan in drinking water, saliva, and human urine samples based on the aggregation of gold nanoparticles

In this study, the determination of sumatriptan (SUM) was performed using a simple, rapid, and precise colorimetric method based on the surface plasmon resonance (SPR) feature of gold nanoparticles (AuNPs). By adding SUM, the aggregation was observed in AuNPs with red-to-blue color shifts. The size distribution of NPs was estimated before and after adding SUM via dynamic light scattering (DLS), which was found to be 15.34 and 97.45 nm, respectively. Characterization of AuNPs, SUM, and AuNPs in combination with SUM was investigated using transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FTIR). Examining the effect of pH, the volume of buffer, the concentration of AuNPs, interaction time, and ionic strength revealed that their optimal values were 6, 100 μL, 5 μM, 14 min, and 12 μg L-1, respectively. The suggested method was able to determine the amount of SUM in a linear range of 10 to 250 μg L-1 with a limit of detection (LOD) and limit of quantification (LOQ) of 0.392 and 1.03 μg L-1, respectively. This approach was successfully applied to determine SUM in drinking water, saliva, and human urine samples with relative standard deviations (RSD) lower than 0.03%, 0.3%, and 1.0%, respectively.

Simultaneous determination of low molecule benzotriazoles and benzotriazole UV stabilizers in wastewater by ultrasound-assisted emulsification microextraction followed by GC-MS detection

A rapid, sensitive, economically and ecologically friendly method based on one-step ultrasound-assisted emulsification microextraction and in situ derivatization followed by gas chromatography-mass spectrometry for simultaneous determination of low molecular benzotriazoles and benzotriazole-based ultraviolet filters was developed. The optimized method allows quantification of benzotriazole, 4-methylbenzotriazole, 5-methylbenzotriazole; 5-chlorobenzotriazole, 2-(2'-hydroxy-3'-tert-butyl-5'-methylphenyl)-5-chlorobenzortriazole and 2-(2'-hydroxy-5'-(1,1,3,3-tetramethylbutyl)phenyl)benzotriazole in municipal and industrial (dairy) wastewater. The method was validated using real influent and effluent wastewater and samples at various stages of the purification process. Relative recoveries obtained using wastewater as sample matrix were between 77 and 137%, method limits of detection from 0.001 to 0.035 µg/L, method limits of quantification from 0.003 to 0.116 µg/L, the repeatability expressed by the coefficient of variation did not exceed 12%. The use of the method for the determination of tested compounds in municipal and industrial wastewater showed their presence in most of the tested samples, in concentrations from LoD to 6.110 µg/L. The conducted studies of samples from municipal wastewater treatment plant located in north-east Poland showed that the effectiveness of benzotriazole removal by this plant wasfrom 29 to 84%. The load of tested compounds released into the environment by this facility ranges from 2 to 269 mg/day/1000 inhabitants.