The Synergistic Character of Highly N‐Doped Coconut–Shell Activated Carbon for Efficient CO 2 Capture

Optimization of the effect of microelectrodes on Ni2+ removal in three-dimensional electrode system

This study investigated Ni⁺² removal performance in 3DER reactors where electrocoagulation mechanisms and microelectrodes are used together. EDTA modification was carried out on the granule-activated carbon surface to increase the efficiency and affinity of microelectrodes against Ni⁺² molecules. The grafting was examined using BET, FT-IR, SEM, EDS, and the elemental mapping methods. With the surface analyses made in this study, it was revealed that EDTA modification on granulated activated carbon was successfully performed. Also, 8.48%wt by mass of EDTA grafting on granular activated carbon was possible. EDTA functionalization did not affect the surface pore structures of CAC much. Under 10 V potential, 97.82% Ni removal efficiency was obtained with 2D in 35 min, while 96.69% removal in 10 min and 100% removal in 15 min were obtained in the 3D reactor. The Ni⁺² removal mechanism in 3DER reactors has been determined to conform to the pseudo-second-order kinetic model. The k₂ value obtained for 10 V (1.36 10^-2) is 27 times the k₂ value obtained for 5 V for 3DER reactors. In addition, using central composite design (CCD), operational parameters such as time, concentration, and potential difference affecting Ni⁺² removal in 3DER reactors have been optimized. The most influential parameter is the applied voltage, followed by time and concentration. It has been determined that 3DER reactors using EDTA-modified microelectrodes are highly efficient and suitable for Ni⁺² removal.

Biomass-based adsorbents for post-combustion CO2 capture: Preparation, performances, modeling, and assessment

The adsorbents are critical carriers in the process of adsorption-based post-combustion CO₂ capture. Biomass-based adsorbents (BAs) are considered to have great potential because of their high efficiency, low cost, and good sustainability. To understand the methods, theories, and technologies of BAs-based CO₂ capture, this work analyzes their preparation and activation/modification, influencing factors, mechanisms, thermodynamics/kinetics, regeneration and cycle performances, and the pathway to application. It is found that BAs prepared by pyrolysis, chemical activation, and modification with dual heteroatoms are more conducive to improving adsorption sites. CO₂ adsorption capacity positively correlates with elemental C and fixed carbon of feedstocks, but negatively with moisture. The BAs prepared at 550-600 °C have high performance. The specific surface area (SSA) increases as the preparation time increases by 9.4%-93.4%. The adsorption capacity is positively correlated to the SSA (R = 0.880) and microporous volume (R = 0.773). Moreover, it decreases linearly with increasing operating temperature with the slope of -0.6 mmol/(g·°C) but increases exponentially with increasing operating pressure and CO₂ concentration with the power of 0.824. The adsorption process includes physical and/or physicochemical adsorption. Freundlich isotherm equation and pseudo-second-order model characterize the adsorption thermodynamics and kinetics more effectively with R² = 0.985-1.000 and R² = 0.894-1.000. The quantum chemistry indicates that most BAs modified with non-metallic belong to physisorption. The regeneration of BAs has low energy consumption (<3.44 MJ/kg CO₂) and loss rate (<8%). Furthermore, the technical pathway is proposed for application. Finally, the challenges are also presented to facilitate the development of BAs-CO₂ capture.

Emerging Modification Technologies of Lignin-based Activated Carbon toward Advanced Applications

Lignin-based activated carbon (LAC) is a promising high-quality functional material due to high surface area, abundant porous structure, and various functional groups. Modification is the most important step to functionalize LAC by altering its porous and chemical properties. This Review summarizes the state-of-the-art modification technologies of LAC toward advanced applications. Promising modification approaches are reviewed to display their effects on the preparation of LAC. The multiscale changes in the porosity and the surface chemistry of LAC are fully discussed. Advanced applications are then introduced to show the potential of LAC for supercapacitor electrode, catalyst support, hydrogen storage, and carbon dioxide capture. Finally, the mechanistic structure-function relationships of LAC are elaborated. These results highlight that modification technologies play a special role in altering the properties and defining the functionalities of LAC, which could be a promising porous carbon material toward industrial applications.