In situ X-ray measurements to probe a new solid-state polycondensation mechanism for the design of supramolecular organo-bridged silsesquioxanes

Supramolecular Nucleic Acid-Based Organosilica Nanoparticles Responsive to Physical and Biological Inputs

Organosilica nanoparticles that contain responsive organic building blocks as constitutive components of the silica network offer promising opportunities for the development of innovative drug formulations, biomolecule delivery, and diagnostic tools. However, the synthetic challenges required to introduce dynamic and multifunctional building blocks have hindered the realization of biomimicking nanoparticles. In this study, capitalizing on our previous research on responsive nucleic acid-based organosilica nanoparticles, we combine the supramolecular programmability of nucleic acid (NA) interactions with sol-gel chemistry. This approach allows us to create dynamic supramolecular bridging units of nucleic acids in a silica-based scaffold. Two peptide nucleic acid-based monoalkoxysilane derivatives, which self-assemble into a supramolecular bis-alkoxysilane through direct base pairing, were chosen as the noncovalent units inserted into the silica network. In addition, a bridging functional NA aptamer leads to the specific recognition of ATP molecules. In a one-step bottom-up approach, the resulting supramolecular building blocks can be used to prepare responsive organosilica nanoparticles. The supramolecular Watson-Crick-Franklin interactions of the organosilica nanoparticles result in a programmable response to external physical (i.e., temperature) and biological (i.e., DNA and ATP) inputs and thus pave the way for the rational design of multifunctional silica materials with application from drug delivery to theranostics.

Two-Photon-Excited Silica and Organosilica Nanoparticles for Spatiotemporal Cancer Treatment

Coherent two-photon-excited (TPE) therapy in the near-infrared (NIR) provides safer cancer treatments than current therapies lacking spatial and temporal selectivities because it is characterized by a 3D spatial resolution of 1 µm³ and very low scattering. In this review, the principle of TPE and its significance in combination with organosilica nanoparticles (NPs) are introduced and then studies involving the design of pioneering TPE-NIR organosilica nanomaterials are discussed for bioimaging, drug delivery, and photodynamic therapy. Organosilica nanoparticles and their rich and well-established chemistry, tunable composition, porosity, size, and morphology provide ideal platforms for minimal side-effect therapies via TPE-NIR. Mesoporous silica and organosilica nanoparticles endowed with high surface areas can be functionalized to carry hydrophobic and biologically unstable two-photon absorbers for drug delivery and diagnosis. Currently, most light-actuated clinical therapeutic applications with NPs involve photodynamic therapy by singlet oxygen generation, but low photosensitizing efficiencies, tumor resistance, and lack of spatial resolution limit their applicability. On the contrary, higher photosensitizing yields, versatile therapies, and a unique spatial resolution are available with engineered two-photon-sensitive organosilica particles that selectively impact tumors while healthy tissues remain untouched. Patients suffering pathologies such as retinoblastoma, breast, and skin cancers will greatly benefit from TPE-NIR ultrasensitive diagnosis and therapy.

Organosilica hybrid nanomaterials with a high organic content: syntheses and applications of silsesquioxanes

Organic-inorganic hybrid materials garner properties from their organic and inorganic matrices as well as synergistic features, and therefore have recently attracted much attention at the nanoscale. Non-porous organosilica hybrid nanomaterials with a high organic content such as silsesquioxanes (R-SiO_1.5, with R organic groups) and bridged silsesquioxanes (O_1.5Si-R-SiO_1.5) are especially attractive hybrids since they provide 20 to 80 weight percent of organic functional groups in addition to the known chemistry and stability of silica. In the organosilica family, silsesquioxanes (R-SiO_1.5) stand between silicas (SiO₂) and silicones (R₂SiO), and are variously called organosilicas, ormosil (organically-modified silica), polysilsesquioxanes and silica hybrids. Herein, we comprehensively review non-porous silsesquioxane and bridged silsesquioxane nanomaterials and their applications in nanomedicine, electro-optics, and catalysis.

Origin of Invariant Gel Melting Temperatures in the c-T Phase Diagram of an Organogel

Binary c-T phase diagrams of organogelators in solvent are frequently simplified to two domains, gel and sol, even when the melting temperatures display two distinct regimes, an increase with T and a plateau. Herein, the c-T phase diagram of an organogelator in solvent is elucidated by rheology, DSC, optical microscopy, and transmitted light intensity measurements. We evidence a miscibility gap between the organogelator and the solvent above a threshold concentration, cL. In this domain the melting or the formation of the gel becomes a monotectic transformation, which explains why the corresponding temperatures are nonvariant above cL. As shown by further studies by variable temperature FTIR and NMR, different types of H-bonds drive both the liquid-liquid phase separation and the gelation.

Eu³⁺-based bridged silsesquioxanes for transparent luminescent solar concentrators

The sol-gel preparation of a bridged silsesquioxane containing europium(III) salts and 2-thenoyltrifluoroacetone has been achieved from a new ethane tetracarboxamide-based organosilane. Free-standing films with thicknesses up to 440 μm and maximum absolute quantum yield (q) of 0.34 ± 0.03 (excitation at 320 nm) were prepared by the drop cast method, while thin films (∼200-400 nm) spin-coated on glass substrates led to highly luminescent coatings with q = 0.60 ± 0.02 (excitation at 345 nm). The thin films were tested as planar luminescent solar concentrators and the optimized device displays an optical conversion efficiency of 12.3% in the absorbing spectral region of the active layer (300-380 nm).

Ordered hybrids from template-free organosilane self-assembly

Despite considerable achievements over the last two decades, nonporous organic-inorganic hybrid materials are mostly amorphous, especially in the absence of solvothermal processes. The organosilane self-assembly approach is one of the few opportunities for creating a regular assembly of organic and inorganic moieties. Additionally, well-established organosilicon chemistry enables the introduction of numerous organic functionalities. The synthesis of periodically ordered hybrids relies on mono-, bis-, or multisilylated organosilane building blocks self-assembling into hybrid mesostructures or superstructures, subsequently cross-linked by siloxane Si-O-Si condensation. The general synthesis procedure is template-free and one-step. However, three concurrent processes underlie the generation of self-organized hybrid networks: thermodynamics of amphiphilic aggregation, dynamic self-assembly, and kinetically controlled sol-gel chemistry. Hence, the set of experimental conditions and the precursor structure are of paramount importance in achieving long-range order. Since the first developments in the mid-1990s, the subject has seen considerable progress leading to many innovative advanced nanomaterials providing promising applications in membranes, pollutant remediation, catalysis, conductive coatings, and optoelectronics. This work reviews, comprehensively, the primary evolution of this expanding field of research.

Self-assembly of bridged silsesquioxanes: modulating structural evolution via cooperative covalent and noncovalent interactions

The self-assembly of a bis-urea phenylene-bridged silsesquioxane precursor during sol-gel synthesis has been investigated by in situ infrared spectroscopy, optical microscopy, and light scattering. In particular, the evolution of the system as a function of processing time was correlated with covalent interactions associated with increasing polycondensation and noncovalent interactions such as hydrogen bonding. A comprehensive mechanism based on the hydrolysis of the phenylene-bridged organosilane precursor prior to the crystallization of the corresponding bridged silsesquioxane via H-bonding and subsequent irreversible polycondensation is proposed.

PM-IRRAS investigation of self-assembled monolayers grafted onto SiO2/Au substrates

Polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) was used to characterize self-assembled monolayers (SAMs). Novel ester-terminated organosilicon coupling agents possessing a trialkoxysilyl headgroup and a urea group in the linear alkyl chains (4) were synthesized and grafted onto SiO(2)/Au substrates (SiO(2) film of 200 Å thickness deposited on gold mirror). This composite substrate allowed the anchoring of SAMs and preserved the high reflectivity for infrared radiation. PM-IRRAS spectra with very high signal-to-noise ratios have been obtained in the mid-infrared spectral range allowing monitoring of the grafted SAMs. Quantitative analysis of the measured signal is described to compare PM-IRRAS and conventional IRRAS spectra. This quantitative analysis has been validated since the band intensities in the corrected PM-IRRAS and conventional IRRAS spectra are identical. Orientation information on the different functional groups has been obtained comparing the corrected PM-IRRAS spectrum with the one calculated using isotropic optical constants of ester-terminated organosilicon coupling agents 4. The carbonyls of the urea groups are preferentially parallel to the substrate surface favoring intermolecular hydrogen bonding and consequently a close packing of the molecules attached to the surface. By contrast, the alkyl chains present gauche defects and are poorly oriented.