A polydiacetylene microchip based on a biotin-streptavidin interaction for the diagnosis of pathogen infections

Uncertainties in synthetic DNA-based data storage

Deoxyribonucleic acid (DNA) has evolved to be a naturally selected, robust biomacromolecule for gene information storage, and biological evolution and various diseases can find their origin in uncertainties in DNA-related processes (e.g. replication and expression). Recently, synthetic DNA has emerged as a compelling molecular media for digital data storage, and it is superior to the conventional electronic memory devices in theoretical retention time, power consumption, storage density, and so forth. However, uncertainties in the in vitro DNA synthesis and sequencing, along with its conjugation chemistry and preservation conditions can lead to severe errors and data loss, which limit its practical application. To maintain data integrity, complicated error correction algorithms and substantial data redundancy are usually required, which can significantly limit the efficiency and scale-up of the technology. Herein, we summarize the general procedures of the state-of-the-art DNA-based digital data storage methods (e.g. write, read, and preservation), highlighting the uncertainties involved in each step as well as potential approaches to correct them. We also discuss challenges yet to overcome and research trends in the promising field of DNA-based data storage.

Colorimetric molecular diagnosis of the HIV gag gene using DNAzyme and a complementary DNA-extended primer

We have developed a novel strategy for the colorimetric detection of PCR products by utilizing a target-specific primer modified at the 5'-end with an anti-DNAzyme sequence. A single-stranded DNAzyme sequence folds into a G-quadruplex structure with hemin and shows strong peroxidase activity. When the complementary strand binds to the DNAzyme sequence, it blocks the formation of the G-quadraduplex structure and loses its peroxidase activity. In the presence of the target gene, PCR amplification proceeds, and anti-DNAzyme sequence modified primers present in the reaction mixture form a double strand through primer extension. Therefore, it does not block the DNAzyme sequence. Further, a colorimetric signal is generated by the addition of 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate) (ABTS) and H₂O₂ at the end of the reaction. We have successfully detected a single copy of the HIV type 1 gag gene in buffer and 10 copies in human serum. The strategy developed could be used to detect DNA and RNA in complex biological samples by simple primer designing that includes DNAzyme and a DNA extended primer.

Biomolecule-Functionalized Smart Polydiacetylene for Biomedical and Environmental Sensing

Polydiacetylene (PDA) has attracted interest for use as a sensing platform in biomedical, environmental, and chemical engineering applications owing to its capacity for colorimetric and fluorescent transition in response to external stimuli. Many researchers have attempted to develop a tailor-made PDA sensor via conjugation of chemical or biological substances to PDA. Here, we review smart bio-conjugates of PDA with various biomolecules such as carbohydrates, lipids, nucleic acids, and proteins. In addition, materialization and signal amplification strategies to improve handling and sensitivity are described.

A Free-Standing and Self-Healable 2D Supramolecular Material Based on Hydrogen Bonding: A Nanowire Array with Sub-2-nm Resolution

In many 2D materials reported thus far, the forces confining atoms in a 2D plane are often strong interactions, such as covalent bonding. Herein, the first demonstration that hydrogen (H)-bonding can be utilized to assemble polydiacetylene (a conductive polymer) toward a 2D material, which is stable enough to be free-standing, is shown. The 2D material is well characterized by a large number of techniques (mainly different microscopy techniques). The H-bonding allows splitting of the material into ribbons, which can reassemble, similar to a zipper, leading to the first example of a healable 2D material. Moreover, such technology can easily create 2D, organic, conductive nanowire arrays with sub-2-nm resolution. This material may have potential applications in stretchable electronics and nanowire cross-bar arrays.

Simultaneous detection of multiple viruses based on chemiluminescence and magnetic separation

In this report, a DNA hybridization based chemiluminescent detection method has been proposed for reliable detection of multiple pathogens. The use of surface modified magnetic nanoparticles can help to integrate this system into an automated platform for high throughput applications.

Polydiacetylene-coated polyvinylidene fluoride strip aptasensor for colorimetric detection of zinc(II)

We report a new polydiacetylene (PDA) sensor strip for simple visual detection of zinc ions in aqueous solution. The specificity of this sensor comes from Zn²⁺ DNA aptamer probes conjugated onto PDA. Effects of aptamer length and structure on the sensitivity of PDA's color transition were first investigated. PDA conjugated with the optimal aptamer sequence was then coated onto a strip of polyvinylidene fluoride membrane and photopolymerized by UV exposure. The newly developed sensor successfully exhibited a blue-to-red chromatic change in a semi-quantitative manner in response to zinc ions. No discernable change was observed in solutions containing other common ions. Advantages of this sensor include its ease of fabrication, high specificity, and equipment-free detection, all of which are desirable for in-field applications and use in resource-limited settings.

Photopatterned Polydiacetylene Images Using a DNA Bio-Photomask

We describe a novel strategy to fabricate a well-defined polydiacetylene (PDA) supramolecular pattern on polyvinylidene fluoride (PVDF) membrane utilizing a DNA bio-photomask. By focusing on that, the absorption spectrum of DNA molecules having a λmax at 260 nm overlaps with the wavelength at which the photopolymerization of the diacetylene monomer occurs, DNA molecules are used to define specific patterns on PVDF membranes coated with diacetylene lipids by shielding the applied 254 nm UV light and consequently preventing the photopolymerization of the lipids. As a result, the DNA-covered regions retain the original white color on the membrane while the regions uncovered by DNA molecules undergo the color change to blue through the photopolymerization by 254 nm UV irradiation. On the basis of the selective illumination through a DNA photomask, we precisely manufacture specific patterns using a microarray spotting method and also demonstrate the capability of this strategy to achieve a novel colorimetric DNA sensor without any complicated process.

Synthesis of a new cationic non-conjugated polymer for discrimination of microbial pathogens

The detection of pathogens plays a crucial role in clinical applications.

Colorimetric detection of influenza A (H1N1) virus by a peptide-functionalized polydiacetylene (PEP-PDA) nanosensor

​We developed a peptide-functionalized polydiacetylene nanosensor for pH1N1 virus detection with the naked eye.

Aptamer-based cell imaging reagents capable of fluorescence switching

We describe an aptamer-conjugated polydiacetylene imaging probe (ACP) that shows highly specific fluorescence switching upon binding to epithelial cancer cells that overexpress the tumor biomarker protein EpCAM (epithelial cell adhesion molecule) on their surface.

Chemiluminescent labels released from long spacer arm-functionalized magnetic particles: a novel strategy for ultrasensitive and highly selective detection of pathogen infections

Previously, the unique advantages provided by chemiluminescence (CL) and magnetic particles (MPs) have resulted in the development of many useful nucleic acid detection methods. CL is highly sensitive, but when applied to MPs, its intensity is limited by the inner filter-like effect arising from excess dark MPs. Herein, we describe a modified strategy whereby CL labels are released from MPs to eliminate this negative effect. This approach relies on (1) the magnetic capture of target molecules on long spacer arm-functionalized magnetic particles (LSA-MPs), (2) the conjugation of streptavidin-alkaline phosphatase (SA-AP) to biotinylated amplicons of target pathogens, (3) the release of CL labels (specifically, AP tags), and (4) the detection of the released labels. CL labels were released from LSA-MPs through LSA ultrasonication or DNA enzymolysis, which proved to be the superior method. In contrast to conventional MPs, LSA-MPs exhibited significantly improved CL detection, because of the introduction of LSA, which was made of water-soluble carboxymethylated β-1,3-glucan. Detection of hepatitis B virus with this technique revealed a low detection limit of 50 fM, high selectivity, and excellent reproducibility. Thus, this approach may hold great potential for early stage clinical diagnosis of infectious diseases.

Nanoscale superstructures assembled by polymerase chain reaction (PCR): programmable construction, structural diversity, and emerging applications

Polymerase chain reaction (PCR) is an essential tool in biotechnology laboratories and is becoming increasingly important in other areas of research. Extensive data obtained over the last 12 years has shown that the combination of PCR with nanoscale dispersions can resolve issues in the preparation DNA-based materials that include both inorganic and organic nanoscale components. Unlike conventional DNA hybridization and antibody-antigen complexes, PCR provides a new, effective assembly platform that both increases the yield of DNA-based nanomaterials and allows researchers to program and control assembly with predesigned parameters including those assisted and automated by computers. As a result, this method allows researchers to optimize to the combinatorial selection of the DNA strands for their nanoparticle conjugates. We have developed a PCR approach for producing various nanoscale assemblies including organic motifs such as small molecules, macromolecules, and inorganic building blocks, such as nanorods (NRs), metal, semiconductor, and magnetic nanoparticles (NPs). We start with a nanoscale primer and then modify that building block using the automated steps of PCR-based assembly including initialization, denaturation, annealing, extension, final elongation, and final hold. The intermediate steps of denaturation, annealing, and extension are cyclic, and we use computer control so that the assembled superstructures reach their predetermined complexity. The structures assembled using a small number of PCR cycles show a lower polydispersity than similar discrete structures obtained by direct hybridization between the nanoscale building blocks. Using different building blocks, we assembled the following structural motifs by PCR: (1) discrete nanostructures (NP dimers, NP multimers including trimers, pyramids, tetramers or hexamers, etc.), (2) branched NP superstructures and heterochains, (3) NP satellite-like superstructures, (4) Y-shaped nanostructures and DNA networks, (5) protein-DNA co-assembly structures, and (6) DNA block copolymers including trimers and pentamers. These results affirm that this method can produce a variety of chemical structures and in yields that are tunable. Using PCR-based preparation of DNA-bridged nanostructures, we can program the assembly of the nanoscale blocks through the adjustment of the primer intensity on the assembled units, the number of PCR cycles, or both. The resulting structures are highly complex and diverse and have interesting dynamics and collective properties. Potential applications of these materials include chirooptical materials, probe fabrication, and environmental and biomedical sensors.

Past and Present Scenario of Imaging Infection and Inflammation: A Nuclear Medicine Perspective

Nuclear medicine techniques provide potential non-invasive tools for imaging infections and inflammations in the body in a precise way. These techniques are further exploited by the use of radiopharmaceuticals in conjunction with imaging tests such as scintigraphy and positron emission tomography. Improved agents for targeting infection exploit the specific accumulation of radiolabeled compounds to understand the pathophysiologic changes involved in the inflammatory process and correlate them with other chronic illnesses. In the recent past, a wide variety of radiopharmaceuticals have been developed, broadly classified as specific radiopharmaceuticals and nonspecific radiopharmaceuticals. New developments in positron emission (leveraging 18F and 18fluorodeoxyglucose) and heterocyclic/peptide chemistry and radiochemistry are resulting in unique agents with high specific activity. Various approaches to visualizing infection and inflammation are presented in this review, in an integral manner, that give a clear view of the existing radiopharmaceuticals in clinical practice and those under development.

Biosensors and chemosensors based on the optical responses of polydiacetylenes

Polydiacetylenes (PDAs), a family of conjugated polymers, have very unique electrical and optical properties. Upon environmental stimulation, such as by viruses, proteins, DNAs, metal ions, organic molecules etc., the blue PDAs can undergo a colorimetric transition from blue to red, which is accompanied by a fluorescence enhancement. Since the first report on polymerized diacetylene molecules as sensors of influenza virus, the development of efficient sensory systems based on PDAs continues to be of great interest. This tutorial review highlights the recent advances in bio- and chemo-sensors derived from polydiacetylenes.

Signal amplification by magnetic force on polydiacetylene supramolecules for detection of prostate cancer

A method in which a permanent magnet is introduced onto polydiacetylene (PDA) vesicle chips is introduced for enhancement of the fluorescence of PDA vesicles. This strategy can be applied to general antibody-based PDA vesicle chips to detect clinically important biomarkers for disease diagnosis.

DNAzyme molecular beacon probes for target-induced signal-amplifying colorimetric detection of nucleic acids

A novel DNAzyme molecular beacon (DNAzymeMB) strategy was developed for target-induced signal-amplifying colorimetric detection of target nucleic acids. The DNAzymeMB, which exhibits peroxidase activity in its free hairpin structure, was engineered to form a catalytically inactive hybrid through hybridization with a blocker DNA. The presence of target DNA leads to dissociation of the DNAzymeMB from the inactive hybrid through hybridization with the blocker DNA. This process results in recovery of the catalytically active DNAzymeMB, which can catalyze a colorimetric reaction that signals the presence of the target DNA. In addition, a primer was rationally designed to anneal to the blocker DNA of the blocker/target DNA duplex and displace the bound target DNA during the extension reaction. The released target DNA triggers the next cycle involving hybridization with blocker DNA, DNAzymeMB dissociation, primer extension, and target displacement. This unique amplifying strategy leads to the generation of multiple numbers of active DNAzymeMB molecules from a single target molecule and gives a detection limit down to 1 pM, a value that is nearly 3 or 5 orders of magnitude lower than those of previously reported DNAzyme molecular beacon-based DNA detection methods.

Electrophoretic separation of DNA in gels and nanostructures

The development of nanostructure devices has opened the door to new DNA separation techniques and fundamental investigations. With advanced nanotechnologies, artificial gels (e.g. nanopillar arrays, nanofilters) can be manufactured with controlled and ordered geometries. This contrast with gels, where the pores are disordered and the range of available pore sizes is limited by the level of cross-linking and the mechanical properties of the gel. In this review, we recall the theories developed for free-solution and gel electrophoresis (extended Ogston model, biased reptation and entropic trapping) and from this perspective, suggestions for future concepts for fast DNA separation using nanostructures will be given.

Current applications and future trends of molecular diagnostics in clinical bacteriology

Molecular diagnostics of infectious diseases, in particular, nucleic-acid-based methods, are the fastest growing field in clinical laboratory diagnostics. These applications are stepwise replacing or complementing culture-based, biochemical, and immunological assays in microbiology laboratories. The first-generation nucleic acid assays were monoparametric such as conventional tests, determining only a single parameter. Improvements and new approaches in technology now open the possibility for the development of multiparameter assays using microarrays, multiplex nucleic acid amplification techniques, or mass spectrometry, while the introduction of closed-tube systems has resulted in rapid microbial diagnostics with a subsequently reduced contamination risk. Whereas the first assays were focused on the detection and identification of microbial pathogens, these new technologies paved the way for the parallel determination of multiple antibiotic resistance determinants or to perform microbial epidemiology and surveillance on a genetic level.