In vitro inhibition of fungal activity by macrophage-mediated sequestration and release of encapsulated amphotericin B nanosupension in red blood cells

Intelligent berberine-loaded erythrocytes attenuated inflammatory cytokine productions in macrophages

Erythrocytes are impressive tools for drug delivery, especially to macrophages. Therefore, berberine was loaded into erythrocytes using both hypotonic pre-swelling and endocytosis methods to target macrophages. Physicochemical and kinetic parameters of the resulting carrier cells, such as drug loading/release kinetics, osmotic fragility, and hematological indices, were determined. Drug loading was optimized for the study using Taguchi experimental design and lab experiments. Loaded erythrocytes were targeted to macrophages using ZnCl2 and bis-sulfosuccinimidyl-suberate, and targeting was evaluated using flow cytometry and Wright-Giemsa staining. Differentiated macrophages were stimulated with lipopolysaccharide, and the inflammatory profiles of macrophages were evaluated using ELISA, western blotting, and real-time PCR. Findings indicated that the endocytosis method is preferred due to its low impact on the erythrocyte's structural integrity. Maximum loading achieved (1386.68 ± 22.43 μg/ml) at 1500 μg/ml berberine treatment at 37 °C for 2 h. Berberine successfully inhibited NF-κB translation in macrophages, and inflammatory response markers such as IL-1β, IL-8, IL-23, and TNF-α were decreased by approximately ninefold, sixfold, twofold, eightfold, and twofold, respectively, compared to the LPS-treated macrophages. It was concluded that berberine-loaded erythrocytes can effectively target macrophages and modulate the inflammatory response.

Glutaraldehyde modified red blood cells delivering artesunate to the liver as a dual therapeutic and prophylactic antimalaria strategy

Malaria can spread quickly in the population and develop rapidly. Patients with malaria usually die due to lack of timely and effective treatment. Artesunate (AS) is a highly effective and low-toxicity antimalarial drug, but its short half-life in the blood makes it difficult to control the malaria infection completely. Red blood cells (RBCs) have great biodegradability and can be employed to encapsulate various drugs. In this work, we employed RBCs as carriers to encapsulate AS and modified them with glutaraldehyde to construct an intelligent response drug delivery system (G-AS-RBCs) targeting the liver for antimalaria therapeutic and prophylactic activity. The G-AS-RBCs had a drug loading amount of 6.56 ± 0.14 mg 10-8 cells, suggesting excellent biocompatibility. G-AS-RBCs exhibited strong liver targeting efforts and can be maintained in the mice for at least 9 days, showing the potential for malaria prevention. The enrichment of AS in the liver was enhanced because of the natural liver targeting of erythrocytes and the enhancement of liver targeting by glutaraldehyde treatment. Furthermore, AS entrapped into RBCs also showed improved slow-release characteristics and achieved a better effect of inhibiting or killing the malaria parasite than free drugs. Therefore, this RBC-based strategy is expected to realize the prevention and treatment of malaria and has good application prospects.

A decade of developing applications exploiting the properties of polyelectrolyte multilayer capsules

Transferring the layer-by-layer (LbL) coating approach from planar surfaces to spherical templates and subsequently dissolving these templates leads to the fabrication of polyelectrolyte multilayer capsules. The versatility of the coatings of capsules and their flexibility upon bringing in virtually any material into the coatings has quickly drawn substantial attention. Here, we provide an overview of the main developments in this field, highlighting the trends in the last decade. In the beginning, various methods of encapsulation and release are discussed followed by a broad range of applications, which were developed and explored. We also outline the current trends, where the range of applications is continuing to grow, including addition of whole new and different application areas.

Red blood cell membrane nanoparticles for tumor phototherapy

Non-invasive phototherapy includes photodynamic therapy (PDT) and photothermal therapy (PTT), and has garnered special interest in anti-tumor therapy. However, traditional photosensitizers or photothermal agents are faced with major challenges, including easy recognition by immune system, rapid clearance from blood circulation, and low accumulation in target sites. Combining the characteristics of natural cell membrane with the characteristics of photosensitizer or photothermal agent is an important technology to achieve the ideal therapeutic effect of cancer. Red cell membrane (RBMs) coated can disguise phototherapy agents as endogenous substances, thus constructing a new nano bionic therapeutic platform, resisting blood clearance and prolonging circulation time. At present, a variety of phototherapy agents based on Nano-RBMs have been isolated or designed. In this review, firstly, the basic principles of Nano-RBMs and phototherapy are expounded respectively. Then, the latest progress of Nano-RBMs for PDT, PTT and PDT/PTT applications in recent five years has been introduced respectively. Finally, the problems and challenges of Nano-RBMs in the field of phototherapy are put forward.

Biological and Intracellular Fates of Drug Nanocrystals through Different Delivery Routes: Recent Development Enabled by Bioimaging and PK Modeling

Nanocrystals have contributed to exciting improvements in the delivery of poorly water-soluble drugs. The biological and intracellular fates of nanocrystals are currently under debate. Due to the remarkable commercial success in enhancing oral bioavailability, nanocrystals have originally been regarded as a simple formulation approach to enhance dissolution. However, the latest findings from novel bioimaging tools lead to an expanded view. Intact nanocrystals may offer long-term durability in the body and offer drug delivery capabilities like those of other nano-carriers. This review renews the understanding of the biological fates of nanocrystals administered via oral, intravenous, and parenteral (e.g., dermal, ocular, and pulmonary) routes. The intracellular pathways and dissolution kinetics of nanocrystals are explored. Additionally, the future trends for in vitro and in vivo quantification of nanocrystals, as well as factors impacting the biological and intracellular fates of nanocrystals are discussed. In conclusion, nanocrystals present a promising and underexplored therapeutic opportunity with immense potential.

Sub-50 nm ultra-small organic drug nanosuspension prepared by cavi-precipitation and its brain targeting potential

The purpose of this study was to show whether it is possible to prepare sub 100 nm or preferably sub-50 nm drug nanosuspension (NS) of suitable quality for intravenous administration. Furthermore, we have studied how the brain targeting potential of such small size organic NS differs from relatively bigger size NS. Two combination technologies (cavi-precipitation, H96) and a standard high-pressure homogenization (HPH) technology were used to prepare drug NS of different sizes. The cavi-precipitation process generated the smallest AmB NS, i.e., 27 nm compared to 79 nm by H96 technology and 252 nm by standard HPH technology. Dialysis of the nanosuspension in the original dispersion media was found to be the most efficient solvent removal method without negatively affecting particle size. The removal of organic solvent was found to drastically improve the stability of the formulations. The protein adsorption pattern shows that the small size NS particles obtained by the cavi-precipitation process have the potential to circulate longer in the bloodstream and have the potential to be taken up by the blood-brain barrier. The cavi-precipitation process generated ultrafine NS particles, which fulfilled the quality requirements for intravenous administration and offer a potential solution for brain targeting.

Delivery strategies of amphotericin B for invasive fungal infections

Invasive fungal infections (IFIs) represent a growing public concern for clinicians to manage in many medical settings, with substantial associated morbidities and mortalities. Among many current therapeutic options for the treatment of IFIs, amphotericin B (AmB) is the most frequently used drug. AmB is considered as a first-line drug in the clinic that has strong antifungal activity and less resistance. In this review, we summarized the most promising research efforts on nanocarriers for AmB delivery and highlighted their efficacy and safety for treating IFIs. We have also discussed the mechanism of actions of AmB, rationale for treating IFIs, and recent advances in formulating AmB for clinical use. Finally, this review discusses some practical considerations and provides recommendations for future studies in applying AmB for combating IFIs.

Shear stress and ROS-responsive biomimetic micelles for atherosclerosis via ROS consumption

Reactive oxygen species (ROS) are well-known important initiating factors required for atherosclerosis formation, which leads to endothelial dysfunction and plaque formation. Most of the existing antithrombotic therapies use ROS-responsive drug delivery systems, which have a certain therapeutic effect but cannot eliminate excess ROS. Therefore, the atherosclerosis cannot be treated from the source. Moreover, nanoparticles are easily cleared by the immune system during blood circulation, which is not conducive to long-term circulation. In this study, we developed an intelligent response system that could simultaneously respond to ROS and the shear stress microenvironment of atherosclerotic plaques. This system was formed by red blood cells (RBCs) and simvastatin-loaded micelles (SV MC). The micelles consisted of poly(glycidyl methacrylate)-polypropylene sulfide (PGED-PPS). The hydrophobic PPS could react with excess ROS to become hydrophilic, which forced the micelle rupture, resulting in drug release. Most importantly, PPS could also significantly deplete the ROS level, realizing the synergistic treatment of atherosclerosis with drugs and materials. The positively charged SV MC and negatively charged RBCs were self-assembled through electrostatic adsorption to obtain SV MC@RBCs. The SV MC@RBCs could respond to the high shear stress at the atherosclerotic plaque, and the shear stress induced SV MC desorption from the RBC surface. Using biomimetic methods to evade the SV MC@RBCs elimination by the immune system and to reduce the ROS plays a vital role in improving atherosclerosis treatment. The results of in vitro and in vivo experiments showed that SV MC@RBCs could effectively treat atherosclerosis. Moreover, not only does the SV MC@RBCs system avoid the risk of bleeding, but it also has excellent in vivo safety. The study results indicate that the SV MC@RBCs system is a promising therapeutic nanomedicine for treating ROS-related diseases.

Autologous erythrocytes delivery of berberine hydrochloride with long-acting effect for hypolipidemia treatment

Discovery of novel pharmacological effects of berberine hydrochloride (BH) has made its clinical application valuable. However, further development and applications of BH are hampered by its short half-life and the side effects associated with its intravenous (iv) injection. To improve the hypolipidemia efficacy and reduce side effects, we encapsulated BH into biocompatible red blood cells (RBCs) to explore its sustained-release effect by hypotonic pre-swelling method. From in vitro evaluation, BH loaded RBCs (BH-RBCs) presented similar morphology and osmotic fragility to native RBCs (NRBCs). After the loading process, the BH-RBCs maintained around 69% of Na⁺/K⁺-ATPase activity of NRBCs and phosphatidylserine externalization value of BH-RBCs was about 26.1 ± 2.9%. The survival test showed that the loaded cells could circulate in plasma for over 9 d. For in vivo evaluation, a series of tests including pharmacokinetics study and hypolipidemic effect were carried out to examine the long-acting effect of BH-RBCs. The results showed that the release of BH in the loaded cells could last for about 5 d and the hypolipidemic effect can still be observed on 5 d after injection. BH-loaded autologous erythrocytes seem to be a promising sustained releasing delivery system with long hypolipidemic effect.

Advanced modification of drug nanocrystals by using novel fabrication and downstream approaches for tailor-made drug delivery

Drug nanosuspensions/nanocrystals have been recognized as one useful and successful approach for drug delivery. Drug nanocrystals could be further decorated to possess extended functions (such as controlled release) and designed for special in vivo applications (such as drug tracking), which make best use of the advantages of drug nanocrystals. A lot of novel and advanced size reduction methods have been invented recently for special drug deliveries. In addition, some novel downstream processes have been combined with nanosuspensions, which have highly broadened its application areas (such as targeting) besides traditional routes. A large number of recent research publication regarding as nanocrystals focuses on above mentioned aspects, which have widely attracted attention. This review will focus on the recent development of nanocrystals and give an overview of regarding modification of nanocrystal by some new approaches for tailor-made drug delivery.

Carbohydrate-based nanocarriers and their application to target macrophages and deliver antimicrobial agents

Many deadly infections are produced by microorganisms capable of sustained survival in macrophages. This reduces exposure to chemadrotherapy, prevents immune detection, and is akin to criminals hiding in police stations. Therefore, the use of glyco-nanoparticles (GNPs) as carriers of therapeutic agents is a burgeoning field. Such an approach can enhance the penetration of drugs into macrophages with specific carbohydrate targeting molecules on the nanocarrier to interact with macrophage lectins. Carbohydrates are natural biological molecules and the key constituents in a large variety of biological events such as cellular communication, infection, inflammation, enzyme trafficking, cellular migration, cancer metastasis and immune functions. The prominent characteristics of carbohydrates including biodegradability, biocompatibility, hydrophilicity and the highly specific interaction of targeting cell-surface receptors support their potential application to drug delivery systems (DDS). This review presents the 21^st century development of carbohydrate-based nanocarriers for drug targeting of therapeutic agents for diseases localized in macrophages. The significance of natural carbohydrate-derived nanoparticles (GNPs) as anti-microbial drug carriers is highlighted in several areas of treatment including tuberculosis, salmonellosis, leishmaniasis, candidiasis, and HIV/AIDS.

Autologous Red Blood Cell Delivery of Betamethasone Phosphate Sodium for Long Anti-Inflammation

Although glucocorticoids are highly effective in treating various types of inflammation such as skin disease, rheumatic disease, and allergic disease, their application have been seriously limited for their high incidence of side effects, particularly in long term treatment. To improve efficacy and reduce side effects, we encapsulated betamethasone phosphate (BSP) into biocompatible red blood cells (RBCs) and explored its long acting-effect. BSP was loaded into rat autologous erythrocytes by hypotonic preswelling method, and the loading amount was about 2.5 mg/mL cells. In vitro, BSP loaded RBCs (BSP-RBCs) presented similar morphology, osmotic fragility to native RBCs (NRBCs). After the loading process, the loaded cells can maintain around 70% of Na⁺/K⁺-ATPase activity of natural cells. In vivo, a series of tests including survival, pharmacokinetics, and anti-inflammatory effect were carried out to examine the long-acting effect of BSP-RBCs. The results shown that the loaded cells could circulate in plasma for over nine days, the release of BSP can last for over seven days and the anti-inflammatory effect can still be observed on day 5 after injection. Totally, BSP-loaded autologous erythrocytes seem to be a promising sustained releasing delivery system with long anti-inflammatory effect.

Therapeutics incorporating blood constituents

Blood deficiency and dysfunctionality can result in adverse events, which can primarily be treated by transfusion of blood or the re-introduction of properly functioning sub-components. Blood constituents can be engineered on the sub-cellular (i.e., DNA recombinant technology) and cellular level (i.e., cellular hitchhiking for drug delivery) for supplementing and enhancing therapeutic efficacy, in addition to rectifying dysfunctioning mechanisms (i.e., clotting). Herein, we report the progress of blood-based therapeutics, with an emphasis on recent applications of blood transfusion, blood cell-based therapies and biomimetic carriers. Clinically translated technologies and commercial products of blood-based therapeutics are subsequently highlighted and perspectives on challenges and future prospects are discussed.

STATEMENT OF SIGNIFICANCE

Blood-based therapeutics is a burgeoning field and has advanced considerably in recent years. Blood and its constituents, with and without modification (i.e., combinatorial), have been utilized in a broad spectrum of pre-clinical and clinically-translated treatments. This review article summarizes the most up-to-date progress of blood-based therapeutics in the following contexts: synthetic blood substitutes, acellular/non-recombinant therapies, cell-based therapies, and therapeutic sub-components. The article subsequently discusses clinically-translated technologies and future prospects thereof.

Red blood cells: Supercarriers for drugs, biologicals, and nanoparticles and inspiration for advanced delivery systems

Red blood cells (RBCs) constitute a unique drug delivery system as a biologic or hybrid carrier capable of greatly enhancing pharmacokinetics, altering pharmacodynamics (for example, by changing margination within the intravascular space), and modulating immune responses to appended cargoes. Strategies for RBC drug delivery systems include internal and surface loading, and the latter can be performed both ex vivo and in vivo. A relatively new avenue for RBC drug delivery is their application as a carrier for nanoparticles. Efforts are also being made to incorporate features of RBCs in nanocarriers to mimic their most useful aspects, such as long circulation and stealth features. RBCs have also recently been explored as carriers for the delivery of antigens for modulation of immune response. Therefore, RBC-based drug delivery systems represent supercarriers for a diverse array of biomedical interventions, and this is reflected by several industrial and academic efforts that are poised to enter the clinical realm.

Co-Assembly of Heparin and Polypeptide Hybrid Nanoparticles for Biomimetic Delivery and Anti-Thrombus Therapy

Biomimetic delivery carriers using polypeptide/heparin hybrid nanoparticles that are adsorbed onto red blood cells for extended blood circulation time have been developed. This might open up an avenue to promote the innovations and advances of biomimetic, stimuli-responsive drug delivery, especially for the site-specific treatment of intravascular diseases such as thrombosis.

Advances of blood cell-based drug delivery systems

Blood cells, including erythrocytes, leukocytes and platelets are used as drug carriers in a wide range of applications. They have many unique advantages such as long life-span in circulation (especially erythrocytes), target release capacities (especially platelets), and natural adhesive properties (leukocytes and platelets). These properties make blood cell based delivery systems, as well as their membrane-derived carriers, far superior to other drug delivery systems. Despite the advantages, the further development of blood cell-based delivery systems was hindered by limitations in the source, storage, and mass production. To overcome these problems, synthetic biomaterials that mimic blood cell and nanocrystallization of blood cells have been developed and may represent the future direction for blood cell membrane-based delivery systems. In this paper, we review recent progress of the rising blood cell-based drug delivery systems, and also discuss their challenges and future tendency of development.

Biomembranes from slaughterhouse blood erythrocytes as prolonged release systems for dexamethasone sodium phosphate

The present study investigated preparation of bovine and porcine erythrocyte membranes from slaughterhouse blood as bio-derived materials for delivery of dexamethasone-sodium phosphate (DexP). The obtained biomembranes, i.e., ghosts were characterized in vitro in terms of morphological properties, loading parameters, and release behavior. For the last two, an UHPLC/-HESI-MS/MS based analytical procedure for absolute drug identification and quantification was developed. The results revealed that loading of DexP into both type of ghosts was directly proportional to the increase of drug concentration in the incubation medium, while incubation at 37°C had statistically significant effect on loaded amount of DexP (P < 0.05). The encapsulation efficiency was about fivefold higher in porcine compared to bovine ghosts. Insight into ghosts' surface morphology by field emission-scanning electron microscopy and atomic force microscopy confirmed that besides inevitable effects of osmosis, DexP inclusion itself had no observable additional effect on the morphology of the ghosts carriers. DexP release profiles were dependent on erythrocyte ghost type and amount of residual hemoglobin. However, sustained DexP release was achieved and shown over 3 days from porcine ghosts and 5 days from bovine erythrocyte ghosts. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:1046-1055, 2016.

Recent advancements in erythrocytes, platelets, and albumin as delivery systems

In the past few years, nanomaterial-based drug delivery systems have been applied to enhance the efficacy of therapeutics and to alleviate negative effects through the controlled delivery of targeting and releasing agents. However, few drug carriers can achieve high targeting efficacy, even when targeting modalities and surface markers are introduced. Immunological problems have also limited their wide applications. Biological drug delivery systems, such as erythrocytes, platelets, and albumin, have been extensively investigated because of their unique properties. In this review, erythrocytes, platelets, and albumin are described as efficient drug delivery systems. Their properties, applications, advantages, and limitations in disease treatment are explained. This review confirms that these systems can be used to facilitate a specific, biocompatible, and smart drug delivery.

Non-genetic engineering of cells for drug delivery and cell-based therapy

Cell-based therapy is a promising modality to address many unmet medical needs. In addition to genetic engineering, material-based, biochemical, and physical science-based approaches have emerged as novel approaches to modify cells. Non-genetic engineering of cells has been applied in delivering therapeutics to tissues, homing of cells to the bone marrow or inflammatory tissues, cancer imaging, immunotherapy, and remotely controlling cellular functions. This new strategy has unique advantages in disease therapy and is complementary to existing gene-based cell engineering approaches. A better understanding of cellular systems and different engineering methods will allow us to better exploit engineered cells in biomedicine. Here, we review non-genetic cell engineering techniques and applications of engineered cells, discuss the pros and cons of different methods, and provide our perspectives on future research directions.

Carrier erythrocytes: recent advances, present status, current trends and future horizons

INTRODUCTION

Carrier erythrocytes, thanks to their main advantages, including biocompatibility, biodegradability, immunocompatibility, simple and well-known structure and physiology, availability for sampling and versatility in loading and use, have been studied as cellular carriers for delivery of drugs and other bioactive agents for more than three decades. Based on this body of knowledge and recent advances in this field, and with the help of novel multidisciplinary sciences and technologies, it seems that this field is becoming renowned and experiencing an outstanding turning point in its developmental history.

AREAS COVERED

In this trendy and timely review, following a short historical review of the story of erythrocytes from oxygen delivery to drug delivery and evaluation of the present status of these biocarriers, recent advances and current experimental, technological and clinical trends, as well as future horizons, and, in particular, translation-prone strategies, are going to be discussed in detail.

EXPERT OPINION

Despite the challenging developmental history of carrier erythrocytes, they now stand closer to clinical use and market entrance due to their unique advantages in drug delivery, proven by recently reported success stories in late-stage clinical trials and progresses made in biotechnology, nanotechnology and biomaterials fields. Translation-prone approaches, like in vivo loading of circulating erythrocytes or semiautomatic loading of erythrocytes, and more realistic study designs by focusing on clinical needs that have not been responded to or erythrocyte biology/fate-inspired study design are among the main trends being focused on by pioneer research groups active in this field of drug delivery.

Combinative Particle Size Reduction Technologies for the Production of Drug Nanocrystals

Nanosizing is a suitable method to enhance the dissolution rate and therefore the bioavailability of poorly soluble drugs. The success of the particle size reduction processes depends on critical factors such as the employed technology, equipment, and drug physicochemical properties. High pressure homogenization and wet bead milling are standard comminution techniques that have been already employed to successfully formulate poorly soluble drugs and bring them to market. However, these techniques have limitations in their particle size reduction performance, such as long production times and the necessity of employing a micronized drug as the starting material. This review article discusses the development of combinative methods, such as the NANOEDGE, H 96, H 69, H 42, and CT technologies. These processes were developed to improve the particle size reduction effectiveness of the standard techniques. These novel technologies can combine bottom-up and/or top-down techniques in a two-step process. The combinative processes lead in general to improved particle size reduction effectiveness. Faster production of drug nanocrystals and smaller final mean particle sizes are among the main advantages. The combinative particle size reduction technologies are very useful formulation tools, and they will continue acquiring importance for the production of drug nanocrystals.

Recent advancements in mechanical reduction methods: particulate systems

The screening of new active pharmaceutical ingredients (APIs) has become more streamlined and as a result the number of new drugs in the pipeline is steadily increasing. However, a major limiting factor of new API approval and market introduction is the low solubility associated with a large percentage of these new drugs. While many modification strategies have been studied to improve solubility such as salt formation and addition of cosolvents, most provide only marginal success and have severe disadvantages. One of the most successful methods to date is the mechanical reduction of drug particle size, inherently increasing the surface area of the particles and, as described by the Noyes-Whitney equation, the dissolution rate. Drug micronization has been the gold standard to achieve these improvements; however, the extremely low solubility of some new chemical entities is not significantly affected by size reduction in this range. A reduction in size to the nanometric scale is necessary. Bottom-up and top-down techniques are utilized to produce drug crystals in this size range; however, as discussed in this review, top-down approaches have provided greater enhancements in drug usability on the industrial scale. The six FDA approved products that all exploit top-down approaches confirm this. In this review, the advantages and disadvantages of both approaches will be discussed in addition to specific top-down techniques and the improvements they contribute to the pharmaceutical field.

Red blood cells and polyelectrolyte multilayer capsules: natural carriers versus polymer-based drug delivery vehicles

INTRODUCTION

Red blood cells (RBCs) and lipid-based carriers on the one hand and polymeric capsules on the other hand represent two of the most widely used carriers in drug delivery. Each class of these carriers has its own set of properties, specificity and advantages. Thorough comparative studies of such systems are reported here for the first time.

AREAS COVERED

In this review, RBCs are described in comparison with synthetic polymeric drug delivery vehicles using polyelectrolyte multilayer capsules as an example. Lipid-based composition of the shell in the former case is particularly attractive due to their inherent biocompatibility and flexibility of the carriers. On the other hand, synthetic approaches to fabrication of polyelectrolyte multilayer capsules permit manipulation of the permeability of their shell as well as tuning their composition, mechanical properties, release methods and targeting.

EXPERT OPINION

In conclusion, properties of RBCs and polyelectrolyte multilayer capsules are reported here highlighting similarities and differences in their preparation and applications. In addition, their advantages and disadvantages are discussed.

Drug nanocrystals in the commercial pharmaceutical development process

Nanosizing is one of the most important drug delivery platform approaches for the commercial development of poorly soluble drug molecules. The research efforts of many industrial and academic groups have resulted in various particle size reduction techniques. From an industrial point of view, the two most advanced top-down processes used at the commercial scale are wet ball milling and high pressure homogenization. Initial issues such as abrasion, long milling times and other downstream-processing challenges have been solved. With the better understanding of the biopharmaceutical aspects of poorly water-soluble drugs, the in vivo success rate for drug nanocrystals has become more apparent. The clinical effectiveness of nanocrystals is proven by the fact that there are currently six FDA approved nanocrystal products on the market. Alternative approaches such as bottom-up processes or combination technologies have also gained considerable interest. Due to the versatility of nanosizing technology at the milligram scale up to production scale, nanosuspensions are currently used at all stages of commercial drug development, Today, all major pharmaceutical companies have realized the potential of drug nanocrystals and included this universal formulation approach into their decision trees.

Erythrocyte-inspired delivery systems

Herein recent progress in developing red blood cell (RBC)-inspired delivery systems is reviewed, with an emphasis on how our growing understanding of fundamental biological properties of natural RBCs has been applied in the design and engineering of these delivery systems. Specifically, progress achieved in developing carrier RBCs, a class of delivery vehicles engineered by directly loading natural RBCs with therapeutic agents, will be reviewed. Then alternative approaches to engineering synthetic vehicles through mimicking the mechanobiological and chemico-biological properties of natural RBCs will be considered. The synthesis and application of RBC membrane-derived vesicles, of which the natural RBC membranes are collected and directly utilized to prepare drug carriers, will then be discussed. Finally, a recent approach in engineering RBC membrane-camouflaged nanoparticle systems that combine advantages of natural RBCs and synthetic biomaterials will be highlighted. These developments indicate that RBC-inspired delivery systems will result in next-generation nanomedicine with extensive medical applications.

Nanoplasmonics for dual-molecule release through nanopores in the membrane of red blood cells

A nanoplasmonics-based opto-nanoporation method of creating nanopores upon laser illumination is applied for inducing diffusion and triggered release of small and large molecules from red blood cells (RBCs). The method is implemented using absorbing gold nanoparticle (Au-NP) aggregates on the membrane of loaded RBCs, which, upon near-IR laser light absorption, induce release of encapsulated molecules from selected cells. The binding of Au-NPs to RBCs is characterized by Raman spectroscopy. The process of release is driven by heating localized at nanoparticles, which impacts the permeability of the membrane by affecting the lipid bilayer and/or trans-membrane proteins. Localized heating and temperature rise around Au-NP aggregates is simulated and discussed. Research reported in this work is relevant for generating nanopores for biomolecule trafficking through polymeric and lipid membranes as well as cell membranes, while dual- and multi-molecule release is relevant for theragnostics and a wide range of therapies.

Cell-based drug-delivery platforms

Cell systems have recently emerged as biological drug carriers, as an interesting alternative to other systems such as micro- and nano-particles. Different cells, such as carrier erythrocytes, bacterial ghosts and genetically engineered stem and dendritic cells have been used. They provide sustained release and specific delivery of drugs, enzymatic systems and genetic material to certain organs and tissues. Cell systems have potential applications for the treatment of cancer, HIV, intracellular infections, cardiovascular diseases, Parkinson’s disease or in gene therapy. Carrier erythrocytes containing enzymes such us L-asparaginase, or drugs such as corticosteroids have been successfully used in humans. Bacterial ghosts have been widely used in the field of vaccines and also with drugs such as doxorubicin. Genetically engineered stem cells have been tested for cancer treatment and dendritic cells for immunotherapeutic vaccines. Although further research and more clinical trials are necessary, cell-based platforms are a promising strategy for drug delivery.

A novel strategy to produce highly stable and transparent aqueous 'nanosolutions' of water-insoluble drug molecules

A surprisingly large proportion of new drug candidates emerging from drug discovery programmes are water-insoluble and, as a result, have poor oral bioavailability. To overcome insolubility, the drug particles are usually dispersed in a medium during product formation, but large particles that are formed may affect product performance and safety. Many techniques have been used to produce nanodispersions-dispersions with nanometre-scale dimensions-that have properties similar to solutions. However, making nanodispersions requires complex processing, and it is difficult to achieve stability over long periods. In this paper, we report a generic method for preparing drug nanoparticles with a combination of antisolvent precipitation in the presence of water-soluble matrices and spray-drying. The spray-dried powder composites (solid dispersion) are microspherical, highly stable and thus form transparent nanodispersions or so-called 'nanosolutions' of water-insoluble drug when simply added to water. Aqueous nanodispersions of silybin (a kind of water-insoluble drug for liver protection) with an average size of 25 nm produced with this approach display a 10 times faster dissolution rate than that of raw drug. This has great potential to offer a novel solution for innovative drugs of the future.

Cell-mediated drug delivery

INTRODUCTION

Drug targeting to sites of tissue injury, tumor or infection with limited toxicity is the goal for successful pharmaceutics. Immunocytes (including mononuclear phagocytes (dendritic cells, monocytes and macrophages), neutrophils and lymphocytes) are highly mobile; they can migrate across impermeable barriers and release their drug cargo at sites of infection or tissue injury. Thus, immune cells can be exploited as Trojan horses for drug delivery.

AREAS COVERED

This paper reviews how immunocytes laden with drugs can cross the blood-brain or blood-tumor barriers to facilitate treatments for infectious diseases, injury, cancer, or inflammatory diseases. The promises and perils of cell-mediated drug delivery are reviewed, with examples of how immunocytes can be harnessed to improve therapeutic end points.

EXPERT OPINION

Using cells as delivery vehicles enables targeted drug transport and prolonged circulation times, along with reductions in cell and tissue toxicities. Such systems for drug carriage and targeted release represent a new disease-combating strategy being applied to a spectrum of human disorders. The design of nanocarriers for cell-mediated drug delivery may differ from those used for conventional drug delivery systems; nevertheless, engaging different defense mechanisms in drug delivery may open new perspectives for the active delivery of drugs.

Preparation and in-vitro characterization of tramadol-loaded carrier erythrocytes for long-term intravenous delivery

Objectives

The hypo-osmotic dialysis method was used for preparation of tramadol-loaded human intact erythrocytes. In response to rapid drug escape from the erythrocytes, a membrane cross-linker, glutaraldehyde, was used successfully.

Methods

The resulting carrier cells were validated in terms of the accuracy and precision of the whole drug loading procedure.

Key findings

The average loaded amount, entrapment efficiency and cell recovery were 1.9041 mg, 95.98% and 85.13%, respectively. The effects of different drug concentrations on loading parameters were studied with the concentration of 10 mg/ml selected as optimal. A series of in-vitro characteristics of carrier erythrocytes, including tramadol release behaviour, haematological indices, particle size distribution, scanning electron microscopy, and osmotic/turbulence fragilities were determined compared with the sham-entrapped and unloaded cells. The results of these in-vitro tests indicated that the erythrocytes did not undergo remarkable irreversible size and shape/topology changes, but the fragility of the membranes of the processed cells were increased.

Conclusions

The collective results of this study showed that the optimized method of entrapment was suitable for the encapsulation of tramadol in erythrocytes with the final carrier cells ready to enter the in-vivo animal studies as a promising long-circulating carrier for tramadol.