HCl-induced nuclearity convergence in diphosphine-protected ultrasmall gold clusters: a novel synthetic route to "magic-number" Au13 clusters

Synthesis and crystallization of a carboxylate functionalized N-heterocyclic carbene-based Au13 cluster with strong photo-luminescence

Here we report the synthesis and crystallization of a -COOH-capped N-heterocyclic carbene (NHC)-protected Au13 cluster. The single-crystal structure of the -COOH-capped NHC-Au13 cluster reveals a classic icosahedral core with one Au atom in its center. The icosahedral core is surrounded by five NHC ligands with pseudo C5 symmetry and exposed carboxyls in a pentagonal antiprism fashion. The detailed formula of the Au cluster was identified as Au13(bi-NHC carboxyl)5Cl2 (hereafter abbreviated as Au13-c). The density functional theory (DFT) calculations confirm that Au13-c is an electronically stable eight-electron super-atom cluster and elucidate its optical transitions in the UV-Vis range. The Au13-c cluster exhibits excellent thermal and chemical stability under bio-relevant conditions. Additionally, this cluster shows a strong red emission in DMF and H2O with an excellent quantum yield (QY) of 40% and 12.6%, respectively. The high QY of Au13-c enables its use in cell imaging on both cancer and noncancerous cells.

Filling the gaps in icosahedral superatomic metal clusters

Chemically modified superatoms have emerged as promising candidates in the new periodic table, in which Au13 and its doped M n Au13- n have been widely studied. However, their important counterpart, Ag13 artificial element, has not yet been synthesized. In this work, we report the synthesis of Ag13 nanoclusters using strong chelating ability and rigid ligands, that fills the gaps in the icosahedral superatomic metal clusters. After further doping Ag13 template with different degrees of Au atoms, we gained insight into the evolution of their optical properties. Theoretical calculations show that the kernel metal doping can modulate the transition of the excited-state electronic structure, and the electron transfer process changes from local excitation (LE) to charge transfer (CT) to LE. This study not only enriches the families of artificial superatoms, but also contributes to the understanding of the electronic states of superatomic clusters.

Diachronic evolvement from tetra-icosahedral to quasi-hexagonal close-packed bimetal clusters

Here we report a diachronic evolvement from tetra-icosahedral Au30Ag12(C[triple bond, length as m-dash]CR)24 to quasi-hcp (hexagonal close-packed) Au47Ag19(C[triple bond, length as m-dash]CR)32 via a one-step reduction, in which the size/structure conversion of the two clusters is not a typical Oswald growth process, but involves interface shrinking followed by core rearrangement and surface polymerization. Au30Ag12(C[triple bond, length as m-dash]CR)24 has an aesthetic Au18Ag8 kernel that is composed of four interpenetrating Au10Ag3 icosahedra, while Au47Ag19(C[triple bond, length as m-dash]CR)32 has a twisted Au19 core capped by a Au12Ag19 shell that are stacked in a layer-by-layer manner with a quasi-hcp pattern. The discovery of the two clusters not only provides further evidence for icosahedral clusters with longer excited-state lifetime compared to hcp-like clusters, but also discloses a double increase in catalytic reactivity for electrocatalytic oxidation of ethanol over quasi-hcp clusters in comparison with icosahedral clusters. This work provides the rationale for reversing the bottom-up growth process to remake bimetal clusters.

Two-Orders-of-Magnitude Enhancement of Photoinitiation Activity via a Simple Surface Engineering of Metal Nanoclusters

Development of high-performance photoinitiator is the key to enhance the printing speed, structure resolution and product quality in 3D laser printing. Here, to improve the printing efficiency of 3D laser nanoprinting, we investigate the underlying photochemistry of gold and silver nanocluster initiators under multiphoton laser excitation. Experimental results and DFT calculations reveal the high cleavage probability of the surface S-C bonds in gold and silver nanoclusters which generate multiple radicals. Based on this understanding, we design several alkyl-thiolated gold nanoclusters and achieve a more than two-orders-of-magnitude enhancement of photoinitiation activity, as well as a significant improvement in printing resolution and fabrication window. Overall, this work for the first time unveils the detailed radical formation pathways of gold and silver nanoclusters under multiphoton activation and substantially improves their photoinitiation sensitivity via surface engineering, which pushes the limit of the printing efficiency of 3D laser lithography.

Triplet-triplet annihilation-based photon upconversion using nanoparticles and nanoclusters

The phenomenon of photon upconversion (UC), generating high-energy photons from low-energy photons, has attracted significant attention. In particular, triplet-triplet annihilation-based UC (TTA-UC) has been achieved by combining the excitation states of two types of molecules, called the sensitizer and emitter (or annihilator). With TTA-UC, it is possible to convert weak, incoherent near-infrared (NIR) light, which constitutes half of the solar radiation intensity, into ultraviolet and visible light that are suitable for the operation of light-responsive functional materials or devices such as solar cells and photocatalysts. Research on TTA-UC is being conducted worldwide, often employing materials with high intersystem crossing rates, such as metal porphyrins, as sensitizers. This review summarizes recent research and trends in triplet energy transfer and TTA-UC for semiconductor nanoparticles or nanocrystals with diameters in the nanometer range, also known as quantum dots, and for ligand-protected metal nanoclusters, which have even smaller well-defined sub-nanostructures. Concerning nanoparticles, transmitter ligands have been applied on the surface of the nanoparticles to efficiently transfer triplet excitons formed inside the nanoparticles to emitters. Applications are expanding to solid-state UC devices that convert NIR light to visible light. Additionally, there is active research in the development of sensitizers using more cost-effective and environmentally friendly elements. Regarding metal nanoclusters, methods have been established for the evaluation of excited states, deepening the understanding of luminescent properties and excited relaxation processes.

Gas-Phase Structures of [Au21(SR)14]- and [Au17(SR)10]- with Eight Electrons: Can They Support an Icosahedral Au13 Core?

A prototypical thiolate (RS)-protected gold cluster [Au25(SR)18]- has high stability due to specific geometric and electronic structures: an icosahedral (Ih) Au13 core with a closed electronic shell containing eight electrons is completely protected by six units of Au2(SR)3. Nevertheless, collisional excitation of [Au25(SR)18]- in a vacuum induces the sequential release of Au4(SR)4 to form [Au21(SR)14]- and [Au17(SR)10]- both containing eight electrons. To answer a naive question of whether these fragments bear an Ih Au13(8e) core, the geometrical structures of [Au21(SC3H7)14]- and [Au17(SC3H7)10]- in the gas phase were examined by the combination of anion photoelectron spectroscopy and density functional theory (DFT) calculation of simplified models of [Au21(SCH3)14]- and [Au17(SCH3)10]-. We concluded that [Au21(SC3H7)14]- retains a slightly distorted Ih Au13(8e) core, while [Au17(SC3H7)10]- has an amorphous Au13 core composed of triangular Au3, tetrahedral Au4, and prolate Au7 units. DFT calculations on putative species [Au19(SCH3)12]- and [Au18(SCH3)11]- suggested that the Ih Au13(8e) core undergoes dramatic structural deformation due to mechanical stress from μ2 ligation of only one RS.

Diphosphine-Protected IrAu12 Superatom with Open Site(s): Synthesis and Programmed Stepwise Assembly

One or two phenylacetylide (PA) ligand(s) were successfully removed from the IrAu12 superatomic core of [IrAu12(dppe)5(PA)2]+ (dppe=1,2-bis(diphenylphosphino)ethane) by reaction with controlled amounts of tetrafluoroboric acid. Optical and nuclear magnetic resonance spectroscopies and density functional theory calculations revealed the formation of open Au site(s) on the IrAu12 core of [IrAu12(dppe)5(PA)1]2+ and [IrAu12(dppe)5]3+ with the remaining structure intact. Isocyanide was efficiently trapped at the open electrophilic site on [IrAu12(dppe)5(PA)1]2+, whereas a dimer or trimer of the IrAu12 superatoms was formed using diisocyanide as a linker. These results open the door to designed assembly of chemically modified metal superatoms.

Staggered Assembly of a Dimeric Au13 Cluster: Impacts on Coupling of Geometric Isomerism

The specific states of aggregation of metal atoms in sub-nanometer-sized gold clusters are related to the different quantum confinement volumes of electrons, leading to novel optical and electronic properties. These volumes can be tuned by changing the relative positions of the gold atoms to generate isomers. Studying the isomeric gold core and the electron coupling between the basic units is fundamentally important for nanoelectronic devices and luminescence; however, appropriate cases are lacking. In this study, the structure of the first staggered di-superatomic Au25 -S was solved using single-crystal X-ray diffraction. The optical properties of Au25 -S were studied by comparing with eclipsed Au25 -E. From Au25 -E to Au25 -S, changes in the electronic structures occurred, resulting in significantly different optical absorptions originating from the coupling between the two Au13 modules. Au25 -S shows a longer electron decay lifetime of 307.7 ps before populating the lowest triplet emissive state, compared to 1.29 ps for Au25 -E. The experimental and theoretical results show that variations in the geometric isomerism lead to distinct photophysical processes owing to isomerism-dependent electronic coupling. This study offers new insights into the connection between the geometric isomerism of nanosized building blocks and the optical properties of their assemblies, opening new possibilities for constructing function-specific nanomaterials.

N-Heterocyclic Carbene-Stabilized Atomically Precise Metal Nanoclusters

This perspective highlights advances in the preparation and understanding of metal nanoclusters stabilized by organic ligands with a focus on N-heterocyclic carbenes (NHCs). We demonstrate the need for a clear understanding of the relationship between NHC properties and their resulting metal nanocluster structure and properties. We emphasize the importance of balancing nanocluster stability with the introduction of reactive sites for catalytic applications and the importance of a better understanding of how these clusters interact with their environments for effective use in biological applications. The impact of atom-scale simulations, development of atomic interaction potentials suitable for large-scale molecular dynamics simulations, and a deeper understanding of the mechanisms behind synthetic methods and physical properties (e.g., the bright fluorescence displayed by many clusters) are emphasized.

Building Block Metal Nanocluster-Based Growth in 1D Direction

Metal nanoclusters with precisely modulated structures at the nanoscale give us the opportunity to synthesize and investigate 1D nanomaterials at the atomic level. Herein, it realizes selective 1D growth of building block nanocluster "Au13 Cd2 " into three structurally different nanoclusters: "hand-in-hand" (Au13 Cd2 )2 O, "head-to-head" Au25 , and "shoulder-to-shoulder" Au33 . Detailed studies further reveals the growth mechanism and the growth-related tunable properties. This work provides new hints for the predictable structural transformation of nanoclusters and atomically precise construction of 1D nanomaterials.

Dual Catalysis of Gold Nanoclusters: Photocatalytic Cross-Dehydrogenative Coupling by Cooperation of Superatomic Core and Molecularly Modified Staples

Thiolate-protected gold nanoclusters (AuNCs) have attracted significant attention as nano-catalysts, revealing a superatomic core and gold-thiolate staples as distinct structural units. Here, we demonstrate the unprecedented dual catalytic activity of thiolate-protected [Au25 (SR)18 ]- nanoclusters, involving both photosensitized 1 O2 generation by the Au13 superatomic core and catalytic carbon-carbon bond formation facilitated by Au2 (SR)3 staples. This synergistic combination of two different catalytic units enables efficient cross-dehydrogenative coupling of terminal alkynes and tertiary aliphatic amines to afford propargylamines in high yields of up to 93 %. Mixed-ligand AuNCs bearing both thiolate and alkynyl ligands revealed the intermediacy of the alkynyl-exchanged AuNCs toward both photosensitization and C-C bond-forming catalytic cycles. Density functional theory calculations also supported the intermediacy of the alkynyl-exchanged AuNCs. Thus, the use of ligand-protected metal nanoclusters has enabled the development of an exceptional multifunctional catalyst, wherein distinct nanocluster components facilitate cooperative photo- and chemo-catalysis.

Effect of Specific Heavy Doping of Silver Atoms into the Icosahedral Au13 on Electronic Structure and Catalytic Performance

The exploration of specific heavy doping of silver atoms into icosahedral Au13 clusters and their electronic structures and properties has been somewhat limited. Herein, we report two heavily Ag doped nanoclusters, [Au7Ag6(C7H4NOS)4(Dppf)3Cl]0 and [Au7Ag6(C7H4NOS)3(Dppf)3Cl](SbF6) (Au7Ag6-0 and Au7Ag6-1, respectively) [C7H4NOSH = 2-mercaptobenzoxazole, and Dppf = 1,1'-bis(diphenylphosphino)ferrocene]. The electronic structures and superatomic orbitals of nanoclusters were determined by density functional theory (DFT) calculations, and the energy degeneracy of the superatomic orbitals of Au7Ag6-1 is higher than that of Au7Ag6-0. Transient absorption spectroscopy was performed, revealing that Au7Ag6-0 significantly extends the excited-state lifetime. Both nanoclusters were supported on activated carbon for the oxygen reduction reaction. DFT calculations confirm that the catalytic activities mainly stem from the carbon atom of ferrocene rather than the iron atom. This study not only sheds light on the preparation of icosahedral alloy clusters but also provides insights into the regulation of icosahedral superatomic structure and electrocatalytic properties.

Dissecting the Triplet-State Properties and Intersystem Crossing Mechanism of the Ligand-Protected Au13 Superatom

Icosahedral Au13 nanoclusters are among the most typical superatoms and are of great interest as promising building blocks for nanocluster-assembled materials. Herein, the key parameters involved in the intersystem crossing (ISC) process of [Au13(dppe)5Cl2]3+ (Au13; dppe = 1,2-bis(diphenylphosphino)ethane) were characterized. Quenching experiments using aromatic compounds revealed that the T1 energy of Au13 is 1.63 eV. An integrative interpretation of our experimental results and the relevant literature uncovered important facts concerning the Au13 superatom: the ISC quantum yield is unity due to the ultrafast ISC (∼1012 s-1), the lowest absorption band includes contributions of direct singlet-triplet transitions, and there exists a large S1-T1 gap of 0.73 eV. To explain the efficient ISC, the El-Sayed rule was applied to the superatomic orbitals corresponding to the excited-state hole/electron distributions obtained from theoretical calculations. The strong spin-orbit coupling between the S1 and T2-T4 states offers a reasonable explanation for the ultrafast ISC.

Thermal Stability and Electronic Properties of N-Heterocyclic Carbene-Protected Au13 Nanocluster and Phosphine-Protected Analogues

Despite significant advances in manufacturing atomically precise gold nanoclusters protected by various ligands, there is a limited understanding of the thermal stability dynamics and electronic properties of ligand effects. We conducted ab initio molecular dynamics (AIMD) simulations on the well-characterized [Au13(NHCMe)9Cl3]2+ nanocluster and its counterpart [Au13(PMe3)9Cl3]2+ cluster to evaluate the thermal stability induced by N-heterocyclic carbene (NHC) and phosphine ligands. The result shows that under vacuum conditions, [Au13(PMe3)9Cl3]2+ is more stable than [Au13(NHCMe)9Cl3]2+, and both lead to metal nucleation decomposition, breaking into the Au12 fragment and L-Au-Cl (L = NHCMe or PMe3) complexes eventually. The optical and electronic properties of these two clusters change significantly due to ligand alteration. Furthermore, we have designed a novel [Au13(NHCMe)(PMe3)8Cl3]2+ cluster coprotected by NHC and phosphine ligands, displaying higher thermal stability than the homoligand protected [Au13(NHCMe)9Cl3]2+ and [Au13(PMe3)9Cl3]2+. Our hypothetical species are an interesting model for nanostructured materials, facilitating the experimental exploration of cluster synthesis and catalytic applications.

Insights into the synthesis of NHC-stabilized Au nanoclusters through real-time reaction monitoring

Atomically precise gold nanoclusters (AuNCs) are interesting nanomaterials with potential applications in catalysis, bioimaging and optoelectronics. Their compositions and properties are commonly evaluated by various analytical techniques, including UV-vis spectroscopy, NMR spectroscopy, ESI mass spectrometry, and single-crystal X-ray diffraction. While these techniques have provided detailed insights into the structure and properties of nanoclusters, synthetic methods still suffer from a lack of in situ and real-time reaction monitoring methodologies. This limits insight into the mechanism of formation of AuNCs and hinders attempts at optimization. We have demonstrated the utility of HPLC-MS as a monitoring methodology in the synthesis of two NHC-protected gold nanoclusters: [Au13(NHC)9Cl3]2+ and [Au24(NHC)14Cl2H3]3+. Herein we show that HPLC coupled with mass spectrometry and 13C NMR spectroscopy of labelled derivatives enables new insight into critical reaction dynamics of AuNCs synthesis and rapid reaction optimization.

Hydride Doping Effects on the Structure and Properties of Eight-Electron Rh/Ag Superatoms: The [RhHx@Ag21-x{S2P(OnPr)2}12] (x = 0-2) Series

Three hitherto unknown eight-electron rhodium/silver alloy nanoclusters, [RhAg₂₁{S₂P(OⁿPr)₂}₁₂] (1), [RhHAg₂₀{S₂P(OⁿPr)₂}₁₂] (2), and [RhH₂Ag₁₉{S₂P(OⁿPr)₂}₁₂] (3), have been isolated and fully characterized. Cluster 1 contains a regular Rh@Ag₁₂ icosahedral core, whereas 2 and 3 exhibit distorted RhH@Ag₁₂ and RhH₂@Ag₁₂ icosahedral cores. The single-crystal neutron structure of 2 located the encapsulated hydride at the center of an enlarged RhAg₃ tetrahedron. A similar position was found by neutron diffraction for one of the hydrides in 3, whereas the other hydride is trigonally coordinated to Rh and an elongated Ag-Ag edge. The solid-state structures of 1-3 possess C₁ symmetry due to the asymmetric arrangement of the surrounding capping Ag atoms. Our investigation shows that the insertion of one hydride dopant provokes the elimination of one capping silver atom on the cluster surface, resulting in the general formula [RhH_x@Ag_21-x{S₂P(OⁿPr)₂}₁₂] (x = 0-2), which maintains the same number of cluster electrons as well as neutral charge. Clusters 1-3 exhibit an intense emission band in the NIR region. Contrarily to their PdAg₂₁ and PdHAg₂₀ relatives, the 4d orbitals of the encapsulated heterometal are somewhat involved in the optical processes.

Monoarsine-protected icosahedral cluster [Au13(AsPh3)8Cl4]+: comparative studies on ligand effect and surface reactivity with its stibine analogue

Ligand shells of gold nanoclusters play important roles in regulating their molecular and electronic structures. However, the similar but distinct impacts of the homologous analogues of the protecting ligands remain elusive. The C_2v symmetric monoarsine-protected cluster [Au₁₃(AsPh₃)₈Cl₄]⁺ (Au₁₃As₈) was facilely prepared by direct reduction of (Ph₃As)AuCl with NaBH₄. This cluster is isostructural with its previously reported stibine analogue [Au₁₃(SbPh₃)₈Cl₄]⁺ (Au₁₃Sb₈), enabling a comparative study between them. Au₁₃As₈ exhibits a blue-shifted electronic absorption band, and this is probably related to the stronger π-back donation interactions between the Au₁₃ core and AsPh₃ ligands, which destabilize its superatomic 1P and 1D orbitals. In comparison to the thermodynamically less stable Au₁₃Sb₈, Au₁₃As₈ achieves a better trade-off between catalytic stability and activity, as demonstrated by its excellent catalytic performance towards the aldehyde-alkyne-amine (A³) coupling reaction. Moreover, the ligand exchange reactions between Au₁₃As₈ with phosphines, as exemplified by PPh₃ and Ph₂P(CH₂)₂PPh₂, suggest that Au₁₃As₈ may be a good precursor cluster for further cluster preparation through the "cluster-to-cluster" route.

Anion-templated silver nanoclusters: precise synthesis and geometric structure

Metal nanoclusters (NCs) are gaining much attention in nanoscale materials research because they exhibit size-specific physicochemical properties that are not observed in the corresponding bulk metals. Among them, silver (Ag) NCs can be precisely synthesized not only as pure Ag NCs but also as anion-templated Ag NCs. For anion-templated Ag NCs, we can expect the following capabilities: 1) size and shape control by regulating the central anion (anion template); 2) stabilization by adjusting the charge interaction between the central anion and surrounding Ag atoms; and 3) functionalization by selecting the type of central anion. In this review, we summarize the synthesis methods and influences of the central anion on the geometric structure of anion-templated Ag NCs, which include halide ions, chalcogenide ions, oxoanions, polyoxometalate, or hydride/deuteride as the central anion. This summary provides a reference for the current state of anion-templated Ag NCs, which may promote the development of anion-templated Ag NCs with novel geometric structures and physicochemical properties.

Pt17 nanocluster electrocatalysts: preparation and origin of high oxygen reduction reaction activity

We recently found that [Pt₁₇(CO)₁₂(PPh₃)₈]^z (Pt = platinum; CO = carbon monoxide; PPh₃ = triphenylphosphine; z = 1+ or 2+) is a Pt nanocluster (Pt NC) that can be synthesized with atomic precision in air. The present study demonstrates that it is possible to prepare a Pt₁₇-supported carbon black (CB) catalyst (Pt₁₇/CB) with 2.1 times higher oxygen reduction reaction (ORR) activity than commercial Pt nanoparticles/CB by the adsorption of [Pt₁₇(CO)₁₂(PPh₃)₈]^z onto CB and subsequent calcination of the catalyst. Density functional theory calculation strongly suggests that the high ORR activity of Pt₁₇/CB originates from the surface Pt atoms that have an electronic structure appropriate for the progress of ORR. These results are expected to provide design guidelines for the fabrication of highly active ORR catalysts using Pt NCs with a diameter of about 1 nm and thereby enabling the use of reduced amounts of Pt in polymer electrolyte fuel cells.

A first glance into mixed phosphine-stibine moieties as protecting ligands for gold clusters

Atomically precise gold clusters have attracted considerable research interest as their tunable structure-property relationships have resulted in widespread applications, from sensing and biomedicine to energetic materials and catalysis. In this article, the synthesis and optical properties of a novel [Au₆(SbP₃)₂][PF₆]₂ cluster are reported. Despite the lack of spherical symmetry in the core, the cluster shows exceptional thermal and chemical stability. Detailed structural attributes and optical properties are evaluated experimentally and theoretically. This, to the best of our knowledge, is the first report of a gold cluster protected via synergistic multidentate coordination of stibine (Sb) and phosphine moieties (P). To further show that the latter moieties give a set of unique properties that differs from monodentate phosphine-protected [Au₆(PPh₃)₆]²⁺, geometric structure, electronic structure, and optical properties are analyzed theoretically. In addition, this report also demonstrates the critical role of overall-ligand architecture in stabilizing mixed ligand-protected gold clusters.

Turning on the Antimicrobial Activity of Gold Nanoclusters Against Multidrug-Resistant Bacteria

In this work, we show that the addition of thiourea (TU) initiated broad-spectrum antimicrobial activity of otherwise inactive D-maltose-capped gold nanoclusters (AuNC-Mal). For example, AuNC-Mal/TU was effective against multidrug-resistant Pseudomonas aeruginosa with a minimum inhibitory concentration (MIC) of 1 μg mL-1 (2.5 μM [Au]) while having 30-60 times lower in vitro cytotoxicity against mammalian cells. The reaction of AuNC-Mal and TU generated the antimicrobial species of [Au(TU)2 ]+ and smaller AuNCs. TU increased the accumulation of Au in bacteria and helped maintain the oxidation state as AuI (vs. AuIII ). The modes of action included the inhibition of thioredoxin reductase, interference with the CuI regulation and depletion of ATP. Moreover, the antimicrobial activity did not change in the presence of colistin or carbonyl cyanide 3-chlorophenylhydrazone, suggesting that AuNC-Mal/TU was indifferent to the outer membrane barrier and to bacterial efflux pumps.

From 8- to 18-Cluster Electrons Superatoms: Evaluation via DFT Calculations of the Ligand-Protected W@Au12(dppm)6 Cluster Displaying Distinctive Electronic and Optical Properties

The iconic W@Au₁₂ icosahedral bare cluster reaches the favorable closed-shell superatomic electron configuration 1S² 1P⁶ 1D¹⁰, making it an 18-cluster electron (18-ce) superatom. Here, we pursue the evaluation of a ligand-protected counterpart based on the construction of a fully phosphine-protected [W@Au₁₂(dppm)₆] cluster strongly related to the characterized [Au₁₃(dppm)₆]⁵⁺ homometallic counterpart. The later cluster has the same total number of valence electrons as the former but is considered an 8-ce superatom with 1S² 1P⁶ configuration. The fundamental differences between 8- and 18-ce species are investigated. The character of the frontier orbitals varies from 1P/1D in the 8-ce case to a 1D/ligand for 18-ce species, enabling an efficient charge transfer toward the ligands upon irradiation, being interesting for electron injection in optoelectronic devices and black absorbers applications. Excited-state properties are also revisited, showing different geometrical and electronic structure variations between 8- and 18-ce species. Moreover, the continuum between the 8- and 18-ce limits has been explored by varying the nature of the encapsulated dopant between group 6 and group 11. The transition between the 8- and 18-ce counts can be formally situated between Pt (8-ce) and Ir (18-ce). Thus, 18-ce derivatives obtained as doped counterparts of homometallic gold clusters can introduce useful alternatives to achieve different properties in related structural motifs, which can be further explored owing to their extension of the well-established versatility of current gold nanoclusters.

Structural Engineering toward Gold Nanocluster Catalysis

Atomically precise gold nanoclusters provide great opportunities to explore the relationship between the structure and properties of nanogold catalysts. A nanocluster consists of a metal core and a surface ligand shell, and both the core and shell have significant effects on the catalytic properties. Thanks to their precise structures, the active metal site of the clusters can be readily identified and the effects of ligands on catalysis can be disclosed. In this Minireview, we summarize recent advances in catalytic research of gold nanoclusters, emphasizing four strategies for constructing open metal sites, including by post-treatment, the bulky ligands strategy, the surface geometric mismatch method, and heteroatom doping procedures. We also discuss the effects of ligands on the catalytic activity, selectivity, and stability of gold cluster catalysts. Finally, we present future challenges relating to gold cluster catalysis.

Insights into mechanisms of diphosphine-mediated controlled surface construction on Au nanoclusters

Unraveling the rules governing the size regulation of nanoclusters is of great importance not only in fundamental research, but also in practical applications because of the high structure-property correlation in nanoclusters. Diphosphine-mediated size tailoring is recognized as a powerful method for modulating the size, configuration, and properties of nanoclusters, but the role of diphosphines in these size-controlled processes is still poorly understood due to a lack of systematic studies. Herein, using Au₂₃(SR)₁₆^- as the template for modification, the factors influencing the size-modulation of nanoclusters by diphosphines were systematically investigated. It is revealed that by controlling the length of the diphosphines (from shorter to longer), Au₂₁(SR)₁₂L₂⁺ (L = diphosphine) and Au₂₂(SR)₁₄L can be produced. Moreover, introducing a rigid group into the diphosphines can twist the structural framework or lead to the formation of a new surface motif configuration in the nanoclusters, forming twisted Au₂₂(SR)₁₄L and Au₂₅(SR)₁₆L₂⁺. The size regulation of these nanoclusters enables fine-tuning of the optical properties, including the absorption wavelengths and photoluminescence emission intensity, affording an avenue for precise control of the physicochemical properties of nanoclusters for practical applications.

Charge-Transfer-Mediated Mechanism Dominates Oxygen Quenching of Ligand-Protected Noble-Metal Cluster Photoluminescence

Photoluminescence (PL) quenching of ligand-protected noble-metal clusters (NMCs) by molecular oxygen is often used to define whether the PL of NMC is fluorescent or phosphorescent, and only energy transfer has been always considered as the quenching mechanism. Herein, we performed the Rehm-Weller analysis of the O₂-induced PL quenching of 13 different NMCs and found that the charge-transfer (CT)-mediated mechanism dominates the quenching process. The quenching rate constant showed a clear dependence on the CT driving force, varied markedly from 10⁶ to 10⁹ M^-1s^-1. Transient absorption spectroscopy and photon upconversion measurements confirmed the triplet sensitization of aromatic molecules by NMCs regardless of the quenching degree by O₂, establishing that the PL of NMCs under investigation originates from the excited triplet state (i.e., phosphorescence). The results herein provide an essential indicator for correctly determining whether the PL of an NMC is fluorescent or phosphorescent.

Doping-Mediated Energy-Level Engineering of M@Au12 Superatoms (M=Pd, Pt, Rh, Ir) for Efficient Photoluminescence and Photocatalysis

We synthesized a series of MAu₁₂ (dppe)₅ Cl₂ (MAu₁₂ ; M=Au, Pd, Pt, Rh, or Ir; dppe=1,2-bis(diphenylphosphino)ethane), which have icosahedral M@Au₁₂ superatomic cores, and systematically investigated their electronic structures, photoluminescence (PL) and photocatalytic properties. The energy gap between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) was expanded when doping an M element positioned at the lower left of the periodic table. The PL quantum yield was enhanced with an increase in the HOMO-LUMO gap and reached 0.46-0.67 for MAu₁₂ (M=Pt, Rh, or Ir) under deaerated conditions. The bright PLs from MAu₁₂ (M=Pt, Rh, or Ir) were assigned to phosphorescence based on quenching by O₂ . MAu₁₂ (M=Pt, Rh, or Ir) acted as a more efficient and stable photocatalyst than Au₁₃ for intramolecular [2+2] cycloaddition of bisenone via the oxidative quenching cycle. This study provides rational guides for designing photoluminescent and photocatalytic gold superatoms by the doping of heterometal elements.

An Overview on Coinage Metal Nanocluster-Based Luminescent Biosensors via Etching Chemistry

The findings from the synthetic mechanism of metal nanoclusters yield the etching chemistry based on coinage metal nanoclusters. The utilization of such chemistry as a tool that can alter the optical properties of metal nanoclusters has inspired the development of a series of emerging luminescent biosensors. Compared with other sensors, the luminescent biosensors have the advantages of being more sensitive, saving time and saving cost. We reviewed topics on the luminescent sensors based on the etching of emissive coinage metal nanoclusters. The molecules possessing varied etching ability towards metal nanoclusters were categorized with discussions of corresponding etching mechanisms. The understanding of etching mechanisms favored the discussions of how to use etching methods to detecting biochemical molecules. The emerging luminescent biosensors via etching chemistry also provided challenges and new opportunities for analytical chemistry and sensors.

Enhanced Fluorescence with Tunable Color in Doped Diphosphine-Protected Gold Nanoclusters

Rational control of the luminescent properties of ligand-protected coinage metal clusters has long been pursued but remains challenging. Here we explore the crucial structural and electronic factors governing the fluorescence of a diphosphine-protected [Au₁₃(dppe)₅Cl₂]³⁺ cluster by time-dependent density functional theory calculations. By substituting the central Au atom with group 5 to group 11 transition metal atoms, the emission wavelength is adjustable from red to blue, accompanied by enhanced fluorescence intensity compared with the undoped cluster. The evolution of light-emitting behavior upon doping and the corresponding roles of the dopant, Au cage, ligands, and their interplay are interpreted at the electronic structure level. In particular, strong dopant-Au cage interaction associated with large electron-hole overlap on the dopant are is a key factor to endow large emission energy and intensity. These theoretical results provide vital guidance for designing atomically precise nanoclusters with visible fluorescence and high quantum yield for practical uses.

A Review of State of the Art in Phosphine Ligated Gold Clusters and Application in Catalysis

Atomically precise gold clusters are highly desirable due to their well-defined structure which allows the study of structure-property relationships. In addition, they have potential in technological applications such as nanoscale catalysis. The structural, chemical, electronic, and optical properties of ligated gold clusters are strongly defined by the metal-ligand interaction and type of ligands. This critical feature renders gold-phosphine clusters unique and distinct from other ligand-protected gold clusters. The use of multidentate phosphines enables preparation of varying core sizes and exotic structures beyond regular polyhedrons. Weak gold-phosphorous (Au-P) bonding is advantageous for ligand exchange and removal for specific applications, such as catalysis, without agglomeration. The aim of this review is to provide a unified view of gold-phosphine clusters and to present an in-depth discussion on recent advances and key developments for these clusters. This review features the unique chemistry, structural, electronic, and optical properties of gold-phosphine clusters. Advanced characterization techniques, including synchrotron-based spectroscopy, have unraveled substantial effects of Au-P interaction on the composition-, structure-, and size-dependent properties. State-of-the-art theoretical calculations that reveal insights into experimental findings are also discussed. Finally, a discussion of the application of gold-phosphine clusters in catalysis is presented.

Looking at platinum carbonyl nanoclusters as superatoms

Although the chemistry of carbonyl-protected platinum nanoclusters is well established, their bonding mode remains poorly understood. In most of them, the average Pt oxidation state is zero or slightly negative, leading to the apparent average configuration 5d¹⁰ 6s^ε (ε = 0 or very small) and the apparent conclusion that metal-metal bonding cannot arise from the completely filled 5d shell nor from the empty (or almost empty) 6s orbitals. However, DFT calculations show in fact that in these species the actual average configuration is 5d^10-x 6s^x, which provides to the whole cluster a significant total number of 6s electrons that ensures metal-metal bonding. This ("excited") average configuration is to be related to that of coinage metals in ligated group 11 nanoclusters (nd¹⁰ (n + 1)s^x). Calculations show that metal-metal bonding in most of these platinum nanoclusters can be rationalized within the concepts of superatoms and supermolecules, in a similar way as for group 11 nanoclusters. The "excited" 5d^10-x 6s^x configuration results from a level crossing between 5d combinations and 6s combinations, the former transferring their electrons to the latter. This level crossing, which does not exist in the bare Pt_n clusters, is induced by the ligand shell, the role of which being thus not innocent with respect to metal-metal bonding.

Ligand Engineering toward the Trade-Off between Stability and Activity in Cluster Catalysis

We report the structures, stability and catalysis properties of two Ag₂₁ nanoclusters, namely [Ag₂₁ (H₂ BTCA)₃ (O₂ PPh₂ )₆ ]SbF₆ (1) and [Ag₂₁ (C≡CC₆ H₃ -3,5-R₂ )₆ (O₂ PPh₂ )₁₀ ]SbF₆ (2) (H₄ BTCA=p-tert-butylthiacalix[4]arene, R=OMe). Both Ag₂₁ structures possess an identical icosahedral kernel that is surrounded by eight peripheral Ag atoms. Single-crystal structural analysis and ESI-MS revealed that 1 is an 8-electron cluster and 2 has four free electrons. Theoretical results show that the P-symmetry orbitals are found as HOMO-1 and HOMO states in 1, and the frontier unoccupied molecular orbitals (LUMO, LUMO+1 and LUMO+2) show D-character, indicating 1 is a superatomic cluster with an electronically closed shell 1S² 1P⁶ , while 2 has an incomplete shell configuration 1S² 1P² . These two Ag₂₁ clusters show superior stability under ambient conditions, and 1 is robust even at 90 °C in toluene and under oxidative conditions (30 % H₂ O₂ ). Significantly, 2 exhibits much higher activity than 1 as catalyst in the reduction of 4-nitrophenol. This work demonstrates that ligands can influence the electronic structures of silver clusters, and further affect their stability and catalytic performance.

Insight Into the Stability and Electronic and Optical Properties of N-Heterocyclic Carbene Analogues of Halogen/Phosphine-Protected Au13 Superatomic Clusters

Atomically precise gold nanoclusters (AuNCs) belong to a relevant area offering useful templates with tunable properties toward functional nanostructures. In this work, we explored the feasible incorporation of N-heterocyclic carbenes (NHCs), as part of the protecting-ligand shell in AuNCs. Our results, which are based on the substitution of phosphine ligands in experimentally characterized AuNCs by NHCs in various eight-electron superatoms Au₁₃ and M₄Au₉ (M = Cu, Ag), indicate similar electronic structure and stability but somewhat different optical properties. These findings support the feasible obtention of novel targets for explorative synthetic efforts featuring NHC ligands on medium-sized species based on the recurrent Au₁₃ icosahedral core. The hypothetical species appear to be interesting templates for building blocks in nanostructured materials with tuned properties, which encourage experimental exploration of ligand versatility in homo- and heterometallic superatomic clusters.

Ligand-Core Interaction in Ligand-Protected Ag25(XR)18 (X= S, Se, Te) Superatoms. Evaluation of Anchor Atom Role via Relativistic DFT Calculations

The isostructural and isoelectronic silver [Ag25(SR)18]- (R=Ligand) cluster to [Au25(SR)18]- gold clusters allows to further understand the fundamental similarities between Au and Ag, at the ultrasmall nanoscale (< 2 nm)...

Calculated linear and nonlinear optical absorption spectra of phosphine-ligated gold clusters

Although prediction of optical excitations of ligated gold clusters by time-dependent density functional theory (TDDFT) is relatively well-established, limitations still exist, for example in the choice of the exchange-correlation functional....

Crystal Structure and Optical Properties of a Chiral Mixed Thiolate/Stibine-Protected Au18 Cluster

We report the first example of a chiral mixed thiolate/stibine-protected gold cluster, formulated as Au₁₈(S-Adm)₈(SbPh₃)₄Br₂ (where S-Adm = 1-adamantanethiolate). Single crystal X-ray crystallography reveals the origin of chirality in the cluster to be the introduction of the rotating arrangement of Au₂(S-Adm)₃ and Au(S-Adm)₂ staple motifs on an achiral Au₁₃ core and the subsequent capping of the remaining gold atoms by SbPh₃ and Br^- ligands. Interestingly, the structure and properties of this new Au₁₈ cluster are found to be different from other reported achiral Au₁₈ clusters and the only other stibine-protected [Au₁₃(SbPh₃)₈Cl₄]⁺ cluster. Detailed analyses on the geometric and electronic structures of the new cluster are carried out to gain insights into its optical properties as well as reactivity and stability of such mixed monolayer-protected clusters.

Programmable Metal Nanoclusters with Atomic Precision

With the recent establishment of atomically precise nanochemistry, capabilities toward programmable control over the nanoparticle size and structure are being developed. Advances in the synthesis of atomically precise nanoclusters (NCs, 1-3 nm) have been made in recent years, and more importantly, their total structures (core plus ligands) have been mapped out by X-ray crystallography. These ultrasmall Au nanoparticles exhibit strong quantum-confinement effect, manifested in their optical absorption properties. With the advantage of atomic precision, gold-thiolate nanoclusters (Au_n (SR)_m ) are revealed to contain an inner kernel, Au-S interface (motifs), and surface ligand (-R) shell. Programming the atomic packing into various crystallographic structures of the metal kernel can be achieved, which plays a significant role in determining the optical properties and the energy gap (E_g ) of NCs. When the size increases, a general trend is observed for NCs with fcc or decahedral kernels, whereas those NCs with icosahedral kernels deviate from the general trend by showing comparably smaller E_g . Comparisons are also made to further demonstrate the more decisive role of the kernel structure over surface motifs based on isomeric Au NCs and NC series with evolving kernel or motif structures. Finally, future perspectives are discussed.

Source of Bright Near-Infrared Luminescence in Gold Nanoclusters

Gold nanoclusters with near-infrared (NIR) photoluminescence (PL) have great potential as sensing and imaging materials in biomedical and bioimaging applications. In this work, Au₂₁(S-Adm)₁₅ and Au₃₈S₂(S-Adm)₂₀ are used to unravel the underlying mechanisms for the improved quantum yields (QY), large Stokes shifts, and long PL lifetimes in gold nanoclusters. Both nanoclusters show decent PL QY. In particular, the Au₃₈S₂(S-Adm)₂₀ nanocluster shows a bright NIR PL at 900 nm with QY up to 15% in normal solvents (such as toluene) at ambient conditions. The relatively lower QY for Au₂₁(S-Adm)₁₅ (4%) compared to that of Au₃₈S₂(S-Adm)₂₀ is attributed to the lowest-lying excited state being symmetry-disallowed, as evidenced by the pressure-dependent antispectral shift of the absorption spectra compared to PL, yet Au₂₁(S-Adm)₁₅ maintains some emissive properties due to a nearby symmetry-allowed excited state. Furthermore, our results show that suppression of nonradiative decay due to the surface "lock rings", which encircle the Au kernel and the surface "lock atoms" which bridge the fundamental Au kernel units (e.g., tetrahedra, icosahedra, etc.), is the key to obtaining high QYs in gold nanoclusters. The complicated excited-state processes and the small absorption coefficient of the band-edge transition lead to the large Stokes shifts and the long PL lifetimes that are widely observed in gold nanoclusters.

The ligand effect of atomically precise gold nanoclusters in tailoring catalytic properties

It is well known that surface ligands are vital layers for ligand-protected Au_n nanoclusters. Improving the knowledge of the relationship between ligands and catalytic properties is a forefront research topic for Au_n nanoclusters. Enormous effort has been devoted to realizing the ligand effect in synthesis, including well-controlled sizes and shapes as well as structural transformation. However, the crucial function of surface ligands has not been addressed yet in catalytic reactions. Here, this review mainly aims to summarize the recent progress concerning the influence of surface ligand layers on catalytic activity and selectivity, based on the various types of ligand protected Au_n nanoclusters. Besides, the potential challenges and opportunities of Au_n nanoclusters are indicated, mainly in terms of surface ligands to guide the improvement of catalytic performances.

Ligand-Protected Au55 with a Novel Structure and Remarkable CO2 Electroreduction Performance

A Au₅₅ nanocluster with the composition of [Au₅₅ (p-MBT)₂₄ (Ph₃ P)₆ ](SbF₆ )₃ (p-MBT=4-methylbenzenethiolate) is synthesized via direct reduction of gold-phosphine and gold-thiolate precursors. Single-crystal X-ray diffraction reveals that this Au₅₅ nanocluster features a face-centered cubic (fcc) Au₅₅ kernel, different from the well-known two-shell cuboctahedral arrangement in Au₅₅ (Ph₃ P)₁₂ Cl₆ . The Au₅₅ cluster shows a wide optical absorption band with optical energy gap (E_g =1.28 eV). It is found that the exclusion of chloride is crucial for the formation of the title cluster, otherwise rod-like [Au₂₅ (SR)₅ (PPh₃ )₁₀ Cl₂ ]²⁺ is obtained. The strategy to run synthetic reaction in the absence of halide leads to new members of phosphine/thiolate co-protected metal nanoclusters. The Au₅₅ nanocluster exhibits high catalytic activity and selectivity for electrochemical reduction of CO₂ to CO; the Faradaic efficiency (FE) reaches 94.1 % at -0.6 V vs. reversible hydrogen electrode (RHE).

Synthesis and enantioseparation of chiral Au13 nanoclusters protected by bis-N-heterocyclic carbene ligands

A series of chiral Au13 nanoclusters were synthesized via the direct reduction of achiral dinuclear Au(i) halide complexes ligated by ortho-xylyl-linked bis-N-heterocyclic carbene (NHC) ligands. A broad range of functional groups are tolerated as wingtip substituents, allowing for the synthesis of a variety of functionalized chiral Au13 nanoclusters. Single crystal X-ray crystallography confirmed the molecular formula to be [Au13(bisNHC)5Cl2]Cl3, with a chiral helical arrangement of the five bidentate NHC ligands around the icosahedral Au13 core. This Au13 nanocluster is highly luminescent, with a quantum yield of 23%. The two enantiomers of the Au13 clusters can be separated by chiral HPLC, and the isolated enantiomers were characterized by circular dichroism spectroscopy. The clusters show remarkable stability, including configurational stability, opening the door to further investigation of the effect of chirality on these clusters.