Silica-modified oligonucleotide-gold nanoparticle conjugate enables closed-tube colorimetric polymerase chain reaction

Highly Selective, Single-Tube Colorimetric Assay for Detection of Multiple Mutations in the Epidermal Growth Factor Receptor Gene

Many closed-tube methods are designed to detect DNA biomarkers. However, the utility of biomarkers such as a DNA mutation related to personalized medicine is limited as the operation of expensive detection instruments requires well-trained technicians. Therefore, we developed a simple and cheap colorimetric assay based on aggregation of silica-gold nanoparticle-modified probes, with linking probes, to detect mutations. This method consists of target amplification, sequence identification, and aggregation of the silica-gold nanoparticle-modified probes. All reactions are controlled by one individual and proceed sequentially, in a single tube, with no manual intervention. Approximately 10 copies of target DNA were detected with this assay, using 12 hot-spot mutations in exon 19 of EGFR gene as the example. In artificial samples, 0.1% mutant DNA can be distinguished from wild-type genomic DNA. The technology was tested on 104 clinical samples, which included 29 samples that were positive for an exon 19 deletion. The data were consistent with amplification refractory mutation system PCR, with the exception of one weakly positive sample, which was confirmed to be positive by digital PCR. The limit of detection of this colorimetric assay was verified to be better than that of amplification refractory mutation system PCR, and it provides a tool to discriminate multiple mutations in EGFR gene in clinical samples.

Dual-Emissive Carbon Dots: Exploring Their Fluorescence Properties for Sensitive Turn-Off-On Recognition of Ferric and Pyrophosphate Ions and Its Application in Fluorometric Detection of the Loop-Mediated Isothermal Amplification Reaction

In this study, dual-emissive carbon dots (CDs) were prepared using p-phenylenediamine (pPDA) and phytic acid (PA) precursors via a one-pot-hydrothermal method. The photophysical, morphological, and structural characterization of CDs was carried out using absorption, fluorescence, Fourier transform infrared (FT-IR) spectroscopy, nuclear magnetic resonance (NMR), and high-resolution transmission electron microscopy (HR-TEM) analysis. The as-prepared CDs displayed dual-fluorescence peaks at 525 and 620 nm upon excitation at 450 nm. The CDs showed good photostability and exhibited solvent-dependent fluorescence properties. The solvatochromic behavior of CDs was utilized to detect water content in organic solvents. Furthermore, the dual-emissive property of CDs was utilized for the sequential detection of ferric (Fe³⁺) and pyrophosphate ions (PPi) by a fluorescence turn-off-on mechanism. The proposed assay showed appreciable fluorescence response toward Fe³⁺ and PPi with high selectivity and good tolerance for common interfering ions. The potential practical application of the CD probe was ascertained by carrying out the fluorometric detection of PPi to affirm the loop-mediated isothermal amplification (LAMP) reaction specific for Mycobacterium tuberculosis (negative and positive clinical samples).

Visualized RNA detection of SARS-CoV-2 in a closed tube by coupling RT-PCR with nested invasive reaction

A simple, cost-effective and reliable diagnosis of pathogen nucleic acids assay is much required for controlling a pandemic of a virus disease, such as COVID-19. Our previously developed visualized detection of pathogen DNA in a single closed tube is very suitable for POCT. However, virus RNA could not be detected directly and should be reverse-transcribed into cDNA in advance. To enable this visualized assay to detect virus RNA directly, various types of reverse transcriptase were investigated, and finally we found that HiScript II reverse transcriptase could keep active and be well adapted to the one-pot visualized assay in optimized conditions. Reverse transcription, template amplification and amplicon identification by PCR coupled with invasive reaction, as well as visualization by self-assembling of AuNP probes could be automatically and sequentially performed in a closed tube under different temperature conditions, achieving "sample (RNA)-in-result (red color)-out" only by a simple PCR engine plus the naked eye. The visualized RT-PCR is sensitive to unambiguous detection of 5 copies of the N and ORFlab genes of SARS-CoV-2 RNA comparing favourably with qPCR methods (commercialized kit), is specific to genotype 3 variants (Alpha, Beta and Omicron) of SARS-CoV-2, and is very accurate for picking up 0.01% Omicron variant from a large amount of sequence-similar backgrounds. The method is employed in detecting 50 clinical samples, and 10 of them were detected as SARS-CoV-2 positive samples, identical to those by conventional RT-PCR, indicating that the method is cost-effective and labor-saving for pathogen RNA screening in resource-limited regions.

The Integration of Gold Nanoparticles with Polymerase Chain Reaction for Constructing Colorimetric Sensing Platforms for Detection of Health-Related DNA and Proteins

Polymerase chain reaction (PCR) is the standard tool in genetic information analysis, and the desirable detection merits of PCR have been extended to disease-related protein analysis. Recently, the combination of PCR and gold nanoparticles (AuNPs) to construct colorimetric sensing platforms has received considerable attention due to its high sensitivity, visual detection, capability for on-site detection, and low cost. However, it lacks a related review to summarize and discuss the advances in this area. This perspective gives an overview of established methods based on the combination of PCR and AuNPs for the visual detection of health-related DNA and proteins. Moreover, this work also addresses the future trends and perspectives for PCR-AuNP hybrid biosensors.

Visualized Genotyping from "Sample to Results" Within 25 Minutes by Coupling Recombinase Polymerase Amplification (RPA) With Allele-Specific Invasive Reaction Assisted Gold Nanoparticle Probes Assembling

A simple and rapid genotyping method with less-instrumentation is essential for realizing point-of-care detection of personalized medicine-related gene biomarkers. Herein, we developed a rapid and visualized genotyping method by coupling recombinase polymerase amplification (RPA) with allele-specific invader reaction assisted gold nanoparticle probes assembling. In the method, the DNA targets were firstly amplified by using RPA, which is a rapid isothermal amplification technology. Then an allele-specific invasion reaction was performed to recognize the single nucleotide polymorphisms (SNPs) site in the amplicons, to produce signal molecules that caused discoloration of gold nanoparticle probes. As a result, genotyping was achieved by observing the color change of the reaction by using naked eye without the requirement for any expensive instrument. In order to achieve rapid genotyping detection, the genomic DNA from oral swab lysate samples were used for the RPA templates amplification. In this way, a visualized genotyping from "samples to results" within 25 min was realized. Two clopidogrel related SNPs CYP2C19*2 and CYP2C19*3 of 56 clinical samples were correctly genotyped by using this rapid visualized genotyping assay. In addition, the feasibility for this pathogen genotyping method was also verified by detecting plasmid DNA containing three SARS-COV-2 gene mutation sites, indicating that this method has the potential for clinical sample detection.

Wet-Etched Microchamber Array Digital PCR Chip for SARS-CoV-2 Virus and Ultra-Early Stage Lung Cancer Quantitative Detection

We report a novel design of chamber-based digital polymerase chain reaction (cdPCR) chip structure. Using a wet etching process and silicon-glass bonding, the chamber size can be adjusted independently of the process and more feasibly in a normal lab. In addition, the structure of the chip is optimized through hydrodynamic computer simulations to eliminate dead space when the sample is injected into the chip. The samples will be distributed to each separated microchambers for an isolated reaction based on Poisson distribution. Due to the difference in expansion coefficients, isolation of the sample in the microchambers by the oil phase on top ensures homogeneity and independence of the sample in the microchambers. The prepared microarray cdPCR chip enables high-throughput and high-sensitivity quantitative measurement of the SARS-CoV-2 virus gene and the mutant lung cancer gene. We applied the chip for the detection of different concentrations of the mix containing the open reading frame 1ab (ORF1ab) gene, the most specific and conservative gene region of the SARS-CoV-2 virus. In addition to this, we also successfully detected the fluorescence of the epidermal growth factor receptor (EGFR) mutant gene in independent microchambers. At a throughput of 46 200 microchambers, solution mixtures containing both genes were successfully tested quantitatively, with a detection limit of 10 copies/μL. Importantly, the chips are individually inexpensive and easy to industrialize. In addition, the microarray can provide a unified solution for other viral sequences, cancer marker assay development, and point-of-care testing (POCT).

Multiplex Visualized Closed-Tube PCR with Hamming Distance 2 Code for 15 HPV Subtype Typing

Cervical cancer is the fourth leading cause of death in women, especially in developing countries. Specific and economic methodologies for HPV typing are crucial in cancer diagnosis and further disease control. However, routine assays based on real-time polymerase chain reaction (qPCR) or DNA-chip hybridization are either incapable of offering detailed subtype information or involve tedious open-tube operations with the risk of cross-contamination from PCR amplicons. Herein, we proposed a multiplex visualized closed-tube PCR (Multi-Vision) for HPV typing. Using gold nanoparticle probes (AuNPs) as a color change indicator combined with a Hamming distance 2 coding scheme, 13 high-risk HPVs and two subtypes associated with high-incidence benign lesions were successfully typed by performing six closed-tube PCRs. The assay demonstrates high specificity with no cross-reaction among different subtypes under several artificial sample concentrations (from 10⁰ to 10³ copies per reaction) and enables highly sensitive detection of as low as 0.5 copies/μL. Further, 105 clinical samples were successfully analyzed using our method with a high concordance rate of 99.05% (104/105) compared to a HPV typing kit. The inconsistent sample was confirmed by sequencing to be consistent with the typing results determined by our method, indicating that Multi-Vision could be a useful tool for HPV detection, especially in resource-limited regions.

Visual detection of in vitro nucleic acid replication by submicro- and nano-sized materials

The rapid growth of in vitro nucleic acid replication has offered a powerful tool for clinical diagnosis, food safety detection and environmental monitorning. Successful implementation of various isothermal nucleic acid amplification methods enables rapid replication of target sequences without the participant of a thermal cycler. Point-of-need analysis possesses great superiorities in user-friendly, instant results analysis, low manufacturing, and consumable costs. To meet the great challenge of point-of-need analysis, developing simple and rapid visual methods becomes crucial. Submicro- and nanomaterials possess unique surface properties, which enables their rapid response to DNA amplicons. Their unique optical, magnetic, catalytic, and other physical/chemical properties have been frequently employed for the visual detection of in vitro nucleic acid replications. Herein, we aim to review the submicro- and nanomaterials-based visual methods for detection of nucleic acid amplification. The visual methods are classified according to the designing strategies (e.g. LSPR, bridging flocculation, luminescence, catalytic reaction, separation, etc.). The basic principles, merits and drawbacks of each strategy are described. The application in analysis of nucleic acid targets and non-nucleic acid targets are discussed. The main challenges and future research directions are also highlighted in this rapidly emerging field.

Closed-Tube PCR with Nested Serial Invasion Probe Visualization Using Gold Nanoparticles

BACKGROUND

Detecting DNA biomarkers related to personalized medicine could improve the outcome of drug therapy. However, personalized medicine in a resource-restrained hospital is very difficult because DNA biomarker detection should be performed by well-trained staff and requires expensive laboratory facilities.

METHODS

We developed a gold nanoparticle–based “Tube-Lab” to enable DNA analysis in a closed tube. Gold nanoparticle–modified probes (GNPs) were used to construct an inexpensive and simple DNA sensor for signal readout. The method consists of 3 steps (template amplification, sequence identification, and GNP-based signal readout), bridged by an invasive reaction. With temperature control at each step, the 3 reactions proceed sequentially and automatically in a closed tube without any liquid transfer. We used Tube-Lab to detect different biomarkers in blood, tissue, and plasma, including US Food and Drug Administration–approved pharmacogenomic biomarkers (single nucleotide polymorphisms, somatic mutations).

RESULTS

The combination of PCR-based template replication and invader-based signal amplification allowed detection of approximately 6 copies of input DNA and the selective pick up 0.1% mutants from large amounts of background DNA. This method highly discriminated polymorphisms and somatic mutations from clinical samples and allowed a “liquid biopsy” assay with the naked eye.

CONCLUSIONS

Tube-Lab provides a promising and cost-effective approach for DNA biomarker analysis, including polymorphisms and somatic mutations from blood DNA, tissue DNA, or circulating tumor DNA in plasma, which are critical for personalized medicine.

Precipitation of PEG/Carboxyl-Modified Gold Nanoparticles with Magnesium Pyrophosphate: A New Platform for Real-Time Monitoring of Loop-Mediated Isothermal Amplification

Gold nanoparticles have proven to be promising for decentralized nucleic acid testing by virtue of their simple visual readout and absorbance-based quantification. A major challenge toward their practical application is to achieve ultrasensitive detection without compromising simplicity. The conventional strategy of thermocycling amplification is unfavorable (because of both instrumentation and preparation of thermostable oligonucleotide-modified gold nanoparticle probes). Herein, on the basis of a previously unreported co-precipitation phenomenon between thiolated poly(ethylene glycol)/11-mercaptoundecanoic acid co-modified gold nanoparticles and magnesium pyrophosphate crystals (an isothermal DNA amplification reaction byproduct), a new ultrasensitive and simple DNA assay platform is developed. The binding mechanism underlying the co-precipitation phenomenon is found to be caused by the complexation of carboxyl and pyrophosphate with free magnesium ions. Remarkably, poly(ethylene glycol) does not hinder the binding and effectively stabilizes gold nanoparticles against magnesium ion-induced aggregation (without pyrophosphate). In fact, a similar phenomenon is observed in other poly(ethylene glycol)- and carboxyl-containing nanomaterials. When the gold nanoparticle probe is incorporated into a loop-mediated isothermal amplification reaction, it remains as a red dispersion for a negative sample (in the absence of a target DNA sequence) but appears as a red precipitate for a positive sample (in the presence of a target). This results in a first-of-its-kind gold nanoparticle-based DNA assay platform with isothermal amplification and real-time monitoring capabilities.

Visualized detection of single-base difference in multiplexed loop-mediated isothermal amplification amplicons by invasive reaction coupled with oligonucleotide probe-modified gold nanoparticles

Loop-mediated isothermal amplification (LAMP) is a well-developed DNA amplification method with an ultra-high sensitivity, but it is difficult to recognize a single-base difference (like genotyping) in target-specific amplicons by conventional detection ways, such as the intercalation of dyes into dsDNA amplicons or the increase of solution turbidity along with the polymerization process. To allow genotyping based on LAMP suitable for POCT (point-of-care testing) or on-site testing, here we proposed a highly specific and cost-effective method for detecting a single-base difference in LAMP amplicons. The method includes three key steps, sequence amplifier to amplify multiple fragments containing the single nucleotide polymorphisms (SNPs) of interest, allele identifier to recognize a targeted base in the amplicons by invasive reaction, and signal generator to yield signals by hybridization-induced assembly of oligonucleotide probe-modified gold nanoparticles. Because the allele identifier is sensitive to one base difference, it is possible to use multiplexed LAMP (mLAMP) to generate amplicon mixtures for multiple SNP typing. Genotyping of 3 different SNPs (CYP2C19*2, CYP2C19*3 and MDR1-C3435T) for guiding the dosage of clopidogrel is successfully carried out in a 3-plex LAMP on real clinical samples. As our method relies on the naked-eye detection and constant-temperature reaction, no expensive instrument is required for both target amplification and sequence identification, thus much suitable for inexpensive gene-guided personalized medicine in source-limited regions.

Structure of Rigid Polymers Confined to Nanoparticles: Molecular Dynamics Simulations Insight

Nanoparticles (NPs) grafted with organic layers form hybrids able to retain their unique properties through integration into the mesoscopic scale. The organic layer structure and response often determine the functionality of the hybrids on the mesoscopic length scale. Using molecular dynamics (MD) simulations, we probe the conformation of luminescent rigid polymers, dialkyl poly(p-phenylene ethynylene)s (PPE), end-grafted onto a silica nanoparticle in different solvents as the molecular weights and polymer coverages are varied. We find that, in contrast to NP-grafted flexible polymers, the chains are fully extended independent of the solvent. In toluene and decane, which are good solvents, the grafted PPEs chains assume a similar conformation to that observed in dilute solutions. In water, which is a poor solvent for the PPEs, the polymer chains form one large cluster but remain extended. The radial distribution of the chains around the core of the nanoparticle is homogeneous in good solvents, whereas in poor solvents clusters are formed independent of molecular weights and coverages. The clustering is distinctively different from the response of grafted flexible and semiflexible polymers.

Investigation of the DNA target design parameters for effective hybridization-induced aggregation of particles for the sequence-specific detection of DNA

In a recent publication, we presented a label-free method for the detection of specific DNA sequences through the hybridization-induced aggregation (HIA) of a pair of oligonucleotide-adducted magnetic particles. Here we show, through the use of modified hardware, that we are able to simultaneously analyze multiple (4) samples, and detect a 26-mer ssDNA sequence at femtomolar concentrations in minutes. As such, this work represents an improvement in throughput and a 100-fold improvement in sensitivity, compared to that reported previously. Here, we also investigate the design parameters of the target sequence, in an effort to maximize the sensitivity of HIA and to use as a guide in future applications of this work. Modifications were made to the original 26-mer oligonucleotide sequence to evaluate the effects of: (1) non-complementary flanking bases, (2) target sequence length, and (3) single base mismatches on aggregation response. The aggregation response decreased as the number of the non-complementary flanking bases increased, with only a five base addition lowering the LOD by four orders of magnitude. Low sensitivity was observed with short sequences of 6 and 10 complementary bases, which were only detectable at micromolar concentrations. Target sequences with 20, 26 or 32 complementary bases provided the greatest sensitivity and were detectable at femtomolar concentrations. Additionally, HIA could effectively differentiate sequences that were fully complementary from those containing 1, 2 or 3 single base mismatches at micromolar concentrations. The robustness of the HIA system to other buffer components was explored with nine potential assay interferents that could affect hybridization (aggregation) or falsely induce aggregation. Of these, purified BSA and lysed whole blood induced a false aggregation. None of the interferents inhibited aggregation when the hybridizing target was added. Having delineated the fundamental parameters affecting HIA-target hybridization, and demonstrating that HIA had the selectivity to detect single base mismatches, this fluor-free end-point detection has the potential to become a powerful tool for microfluidic DNA detection.

Improving colorimetric assays through protein enzyme-assisted gold nanoparticle amplification

The discovery of the DNA-mediated assembly of gold nanoparticles was a great moment in the history of science; this understanding and chemical control enabled the rational design of functional nanomaterials as novel probes in biodetection. In contrast with conventional probes such as organic dyes, gold nanoparticles exhibit high photostability and unique size-dependent optical properties. Because of their high extinction coefficients and strong distance dependent optical properties, these nanoparticles have emerged over the past decade as a promising platform for rapid, highly sensitive colorimetric assays that allow for the visual detection of low concentrations of metal ions, small molecules, and biomacromolecules. These discoveries have deepened our knowledge of biological phenomena and facilitated the development of many new diagnostic and therapeutic tools. Despite these many advances and continued research efforts, current nanoparticle-based colorimetric detection systems still suffer from several drawbacks, such as limited sensitivity and selectivity. This Account describes the recent development of colorimetric assays based on protein enzyme-assisted gold nanoparticle amplification. The benefits of such detection systems include significantly improved detection sensitivity and selectivity. First, we discuss the general design of enzyme-modified nanoparticle systems in colorimetric assays. We show that a quantitative understanding of the unique properties of different enzymes is paramount for effective biological assays. We then examine the assays for nucleic acid detection based on different types of enzymes, including endonucleases, ligases, and polymerases. For each of these assays, we identify the underlying principles that contribute to the enhanced detection capability of nanoparticle systems and illustrate them with selected examples. Furthermore, we demonstrate that the combination of gold nanoparticles and specific enzymes can probe enzyme dynamics and function with high specificity, offering substantial advantages in both sensitivity and specificity over conventional detection methods. The screening of nuclease, methyltransferase, protease, and kinase activities can be colorimetrically performed in a straightforward manner. Finally, we discuss examples of colorimetric assays for metal ions and small molecules that constitute important advances toward visual monitoring of enzyme catalytic functions and gene expression. Although these enzyme-assisted assay methods hold great promise for myriad applications in biomedicine and bioimaging, the application of the described techniques in vivo faces formidable challenges. In addition, researchers do not fully understand the interactions of gold nanoparticles with enzyme molecules. This understanding will require the development of new techniques to probe enzyme substrate dynamics at the particle interface with higher spatial resolution and chemical specificity.