1
|
Asghari E, Moosavi A, Hannani SK. Non-Newtonian droplet-based microfluidics logic gates. Sci Rep 2020; 10:9293. [PMID: 32518389 PMCID: PMC7283233 DOI: 10.1038/s41598-020-66337-7] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/20/2019] [Accepted: 03/06/2020] [Indexed: 11/09/2022] Open
Abstract
Droplet-based microfluidic logic gates have many applications in diagnostic assays and biosciences due to their automation and the ability to be cascaded. In spite of many bio-fluids, such as blood exhibit non-Newtonian characteristics, all the previous studies have been concerned with the Newtonian fluids. Moreover, none of the previous studies has investigated the operating regions of the logic gates. In this research, we consider a typical AND/OR logic gate with a power-law fluid. We study the effects of important parameters such as the power-law index, the droplet length, the capillary number, and the geometrical parameters of the microfluidic system on the operating regions of the system. The results indicate that AND/OR states mechanism function in opposite directions. By increasing the droplet length, the capillary number and the power-law index, the operating region of AND state increases while the operating region of OR state reduces. Increasing the channel width will decrease the operating region of AND state while it increases the operating region of OR state. For proper operation of the logic gate, it should work in both AND/OR states appropriately. By combining the operating regions of these two states, the overall operating region of the logic gate is achieved.
Collapse
Affiliation(s)
- Elmira Asghari
- Center of Excellence in Energy Conversion (CEEC), School of Mechanical Engineering, Sharif University of Technology, Azadi Avenue, P. O. Box 11365-9567, Tehran, Iran
| | - Ali Moosavi
- Center of Excellence in Energy Conversion (CEEC), School of Mechanical Engineering, Sharif University of Technology, Azadi Avenue, P. O. Box 11365-9567, Tehran, Iran.
| | - Siamak Kazemzadeh Hannani
- Center of Excellence in Energy Conversion (CEEC), School of Mechanical Engineering, Sharif University of Technology, Azadi Avenue, P. O. Box 11365-9567, Tehran, Iran
| |
Collapse
|
2
|
Yang SH, Park J, Youn JR, Song YS. Programmable microfluidic logic device fabricated with a shape memory polymer. LAB ON A CHIP 2018; 18:2865-2872. [PMID: 30105331 DOI: 10.1039/c8lc00627j] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
Manipulation of particles in a microfluidic system is an important research subject in biomedical engineering. However, most conventional passive techniques for particle control have difficulties in integrating other functions into microfluidic channels. A unique microfluidic valve was proposed in this study for switchable particle control by employing a shape memory polymer (SMP). A microfluidic logic device can be programmed based on deformation of the SMP microchannel constructed on a poly(dimethylsiloxane) (PDMS) film. Particles in a viscoelastic flow were focused at preferred equilibrium locations by the competition between inertia and elastic forces. The channel shape played an important role in determining those forces in the channel. Hydrodynamic behavior and shape recovery behavior of the SMP microchannel were modeled theoretically. It was confirmed that the particle valve prepared with the SMP implemented a programmable binary logic operation in the microfluidic channel.
Collapse
Affiliation(s)
- Sei Hyun Yang
- Research Institute of Advanced Materials (RIAM), Department of Materials Science and Engineering, Seoul National University, Seoul 08826, Republic of Korea.
| | | | | | | |
Collapse
|
3
|
Wang J, Rodgers VGJ, Brisk P, Grover WH. MOPSA: A microfluidics-optimized particle simulation algorithm. BIOMICROFLUIDICS 2017; 11:034121. [PMID: 28713477 PMCID: PMC5484639 DOI: 10.1063/1.4989860] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/11/2017] [Accepted: 06/12/2017] [Indexed: 05/31/2023]
Abstract
Computer simulation plays a growing role in the design of microfluidic chips. However, the particle tracers in some existing commercial computational fluid dynamics software are not well suited for accurately simulating the trajectories of particles such as cells, microbeads, and droplets in microfluidic systems. To address this issue, we present a microfluidics-optimized particle simulation algorithm (MOPSA) that simulates the trajectories of cells, droplets, and other particles in microfluidic chips with more lifelike results than particle tracers in existing commercial software. When calculating the velocity of a particle, MOPSA treats the particle as a two-dimensional rigid circular object instead of a single point. MOPSA also checks for unrealistic interactions between particles and channel walls and applies an empirical correcting function to eliminate these errors. To validate the performance of MOPSA, we used it to simulate a variety of important features of microfluidic devices like channel intersections and deterministic lateral displacement (DLD) particle sorter chips. MOPSA successfully predicted that different particle sizes will have different trajectories in six published DLD experiments from three research groups; these DLD chips were used to sort a variety of different cells, particles, and droplets. While some of these particles are not actually rigid or spherical, MOPSA's approximation of these particles as rigid spheres nonetheless resulted in lifelike simulations of the behaviors of these particles (at least for the particle sizes and types shown here). In contrast, existing commercial software failed to replicate these experiments. Finally, to demonstrate that MOPSA can be extended to simulate other properties of particles, we added support for simulating particle density to MOPSA and then used MOPSA to simulate the operation of a microfluidic chip capable of sorting cells by their density. By enabling researchers to accurately simulate the behavior of some types of particles in microfluidic chips before fabricating the chips, MOPSA should accelerate the development of new microfluidic devices for important applications.
Collapse
Affiliation(s)
- Junchao Wang
- Department of Bioengineering, University of California, Riverside, California 92521, USA
| | - Victor G J Rodgers
- Department of Bioengineering, University of California, Riverside, California 92521, USA
| | - Philip Brisk
- Department of Computer Science and Engineering, University of California, Riverside, California 92521, USA
| | - William H Grover
- Department of Bioengineering, University of California, Riverside, California 92521, USA
| |
Collapse
|
4
|
Dynamic manipulation of particles via transformative optofluidic waveguides. Sci Rep 2015; 5:15170. [PMID: 26471003 PMCID: PMC4607948 DOI: 10.1038/srep15170] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/29/2015] [Accepted: 09/18/2015] [Indexed: 12/19/2022] Open
Abstract
Optofluidics is one of the most remarkable areas in the field of microfluidic research. Particle manipulation with optofluidic platforms has become central to optical chromatography, biotechnology, and μ-total analysis systems. Optical manipulation of particles depends on their sizes and refractive indices (n), which occasionally leads to undesirable separation consequences when their optical mobilities are identical. Here, we demonstrate rapid and dynamic particle manipulation according to n, regardless of size. Integrated liquid-core/solid-cladding (LS) and liquid-core/liquid-cladding (L2) waveguides were fabricated and their characteristics were experimentally and theoretically determined. The high and low n particles showed the opposite behaviors by controlling the contrast of their n values to those of the working fluids. The LS waveguide was found to successfully manipulate particles according to n, and the L2 waveguide was found to provide additional system stability and flexibility, compared to the LS system.
Collapse
|
5
|
Sajeesh P, Manasi S, Doble M, Sen AK. A microfluidic device with focusing and spacing control for resistance-based sorting of droplets and cells. LAB ON A CHIP 2015; 15:3738-3748. [PMID: 26235533 DOI: 10.1039/c5lc00598a] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/04/2023]
Abstract
This paper reports a novel hydrodynamic technique for sorting of droplets and cells based on size and deformability. The device comprises two modules: a focusing and spacing control module and a sorting module. The focusing and spacing control module enables focusing of objects present in a sample onto one of the side walls of a channel with controlled spacing between them using a sheath fluid. A 3D analytical model is developed to predict the sheath-to-sample flow rate ratio required to facilitate single-file focusing and maintain the required spacing between a pair of adjacent objects. Experiments are performed to demonstrate focusing and spacing control of droplets (size 5-40 μm) and cells (HL60, size 10-25 μm). The model predictions compare well with experimental data in terms of focusing and spacing control within 9%. In the sorting module, the main channel splits into two branch channels (straight and side branches) with the flow into these two channels separated by a "dividing streamline". A sensing channel and a bypass channel control the shifting of the dividing streamline depending on the object size and deformability. While resistance offered by individual droplets of different sizes has been studied in our previous work (P. Sajeesh, M. Doble and A. K. Sen, Biomicrofluidics, 2014, 8, 1-23), here we present resistance of individual cells (HL60) as a function of size. A theoretical model is developed and used for the design of the sorter. Experiments are performed for size-based sorting of droplets (sizes 25 and 40 μm, 10 and 15 μm) and HL60 cells (sizes 11 μm and 19 μm) and deformability-based sorting of droplets (size 10 ± 1.0 μm) and polystyrene microbeads (size 10 ± 0.2 μm). The performance of the device for size- and deformability-based sorting is characterized in terms of sorting efficiency. The proposed device could be potentially used as a diagnostic tool for sorting of larger tumour cells from smaller leukocytes.
Collapse
Affiliation(s)
- P Sajeesh
- Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai 600036, India.
| | | | | | | |
Collapse
|
6
|
Ding Y, Casadevall i Solvas X, deMello A. “V-junction”: a novel structure for high-speed generation of bespoke droplet flows. Analyst 2015; 140:414-21. [DOI: 10.1039/c4an01730g] [Citation(s) in RCA: 24] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
We present the use of microfluidic “V-junctions” as a droplet generation strategy that incorporates enhanced performance characteristics when compared to more traditional “T-junction” formats.
Collapse
Affiliation(s)
- Yun Ding
- Department of Chemistry and Applied Biosciences
- Institute for Chemical and Bioengineering
- ETH Zurich
- Zurich
- Switzerland
| | - Xavier Casadevall i Solvas
- Department of Chemistry and Applied Biosciences
- Institute for Chemical and Bioengineering
- ETH Zurich
- Zurich
- Switzerland
| | - Andrew deMello
- Department of Chemistry and Applied Biosciences
- Institute for Chemical and Bioengineering
- ETH Zurich
- Zurich
- Switzerland
| |
Collapse
|
7
|
Destgeer G, Ha BH, Jung JH, Sung HJ. Submicron separation of microspheres via travelling surface acoustic waves. LAB ON A CHIP 2014; 14:4665-72. [PMID: 25312065 DOI: 10.1039/c4lc00868e] [Citation(s) in RCA: 85] [Impact Index Per Article: 8.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/04/2023]
Abstract
Submicron separation is the segregation of particles having a diameter difference of less than one micrometre. We present an acoustofluidic particle separator with submicron separation resolution to study the continuous, label-free, and contactless separation of polystyrene (PS) particles based on their acoustofluidic parameters such as size, density, compressibility and shape. In this work, the submicron separation of PS microspheres, having a marginal size difference, is achieved inside a polydimethylsiloxane (PDMS) microfluidic channel via travelling surface acoustic waves (TSAWs). The TSAWs of different frequencies (200, 192, 155, and 129 MHz), propagating normal to the fluid flow direction inside the PDMS microchannel, realized continuous separation of particles with a diameter difference as low as 200 nm. A theoretical framework based on the rigid and elastic theories is presented to support the experimental results.
Collapse
Affiliation(s)
- Ghulam Destgeer
- Department of Mechanical Engineering, KAIST, 291 Daehak-ro, Yuseong-gu, Daejeon 305-701, Korea.
| | | | | | | |
Collapse
|
8
|
Kim J, Vanapalli SA. Microfluidic production of spherical and nonspherical fat particles by thermal quenching of crystallizable oils. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2013; 29:12307-12316. [PMID: 24000772 DOI: 10.1021/la401338m] [Citation(s) in RCA: 18] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/02/2023]
Abstract
We report the microfluidic production of spherical and nonspherical fat particles from crystallizable oils. The method is based on microfluidic generation of oil droplets at a cross-junction followed by thermal solidification downstream in a microcapillary. We vary the drop production conditions and the device temperature and demonstrate that the size, shape, and crystallinity can be controlled. By measuring thermal gradients in the microcapillary, we show that crystalline fat particles are best produced when the device temperature is below the onset temperature of bulk fat crystallization. To produce monodisperse nonspherical fat particles, we find that the carrier fluid flow rate needs to be sufficiently high to provide strong hydrodynamic forces to transport the confined rod-like particles. We identify the scaling relationship between geometric confinement and particle elasticity necessary to maintain the nonspherical shape. Thus, our study provides guidelines for the production of spherical and nonspherical fat particles that can be potentially used for controlling microstructure, rheology, and drug encapsulation in foods, cosmetics, and pharmaceutical creams that employ crystallizable oils.
Collapse
Affiliation(s)
- Jihye Kim
- Department of Chemical Engineering, Texas Tech University , Lubbock, Texas 79409, United States
| | | |
Collapse
|
9
|
Parthiban P, Khan SA. Bistability in droplet traffic at asymmetric microfluidic junctions. BIOMICROFLUIDICS 2013; 7:44123. [PMID: 24404056 PMCID: PMC3765336 DOI: 10.1063/1.4819276] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/08/2013] [Accepted: 08/13/2013] [Indexed: 05/06/2023]
Abstract
We present the first experimental demonstration of confined microfluidic droplets acting as discrete negative resistors, wherein the effective hydrodynamic resistance to flow in a microchannel is reduced by the presence of a droplet. The implications of this hitherto unexplored regime in the traffic of droplets in microfluidic networks are highlighted by demonstrating bistable filtering into either arm of symmetric and asymmetric microfluidic loops, and programming oscillatory droplet routing therein.
Collapse
Affiliation(s)
- Pravien Parthiban
- Singapore-MIT Alliance, National University of Singapore, 4 Engineering Drive 3, E4-04-10, Singapore 117576
| | - Saif A Khan
- Singapore-MIT Alliance, National University of Singapore, 4 Engineering Drive 3, E4-04-10, Singapore 117576 ; Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, E5-02-28, Singapore 117576
| |
Collapse
|