Metal-cluster-decorated TiO2 nanotube arrays: a composite heterostructure toward versatile photocatalytic and photoelectrochemical applications

Engineering ZnIn2S4 with efficient charge separation and utilization for synergistic accelerate dual-function photocatalysis

Combining photocatalytic reduction with organic synthetic oxidation in the same photocatalytic redox system can effectively utilize photoexcited electrons and holes from solar to chemical energy. Here, we stabilized 0D Au clusters on the substrate surface of Zn vacancies modified 2D ZnIn2S4 (ZIS-V) nanosheets by chemically bonding Au-S interaction, forming surfactant functionalized Au/ZIS-V photocatalyst, which can not only synergistic accelerate the selective oxidation of phenylcarbinol to value-added products coupled with clean energy hydrogen production but also further drive photocatalytic CO2-to-CO conversion. An internal electric field of Au/ZIS-V ohmic junction and Zn vacancies synchronously promote the photoexcited charge carrier separation and transfer to optimized active sites for redox reactions. Compared with CO2 reduction in water and the pristine ZnIn2S4, the reaction thermodynamics and kinetics of CO2 reduction over the Au/ZIS-V were simultaneously improved about 11.09 and 45.51 times, respectively. Moreover, the photocatalytic redox mechanisms were also profoundly studied by 13CO2 isotope tracing tests, in situ electron paramagnetic resonance (in situ EPR), in situ X-ray photoelectron spectroscopy (in situ XPS), in situ diffuse reflection infrared Fourier transform spectroscopy (in situ DRIFTS) and density functional theory (DFT) characterizations, etc. These results demonstrate the advantages of vacancies coupled with metal clusters in the synergetic enhancement of photocatalytic redox performance and have great potential applications in a wide range of environments and energy.

The interaction of size-selected Ru3 clusters with TiO2: depth-profiling of encapsulated clusters

Ru is a metal of interest in catalysis. Monodisperse Ru3 clusters as catalytic sites are relevant for the development of catalysts because clusters use significantly lower amounts of precious materials for forming active sites due to the small size of the cluster. However, retaining the mono-dispersity of the cluster size after deposition is a challenge because surface energy could drive both agglomeration and encapsulation of the clusters. In the present work Ru3 clusters are deposited by chemical vapor deposition (CVD) of Ru3(CO)12 and cluster source depositions of bare Ru3 onto radio frequency sputter-deposited TiO2 (RF-TiO2) substrates, TiO2(100), and SiO2. When supported on RF-TiO2, bare Ru3 is encapsulated by a layer of titania substrate material during deposition with a cluster source. Ligated Ru3(CO)12 is also encapsulated by a layer of titania when deposited onto sputter-treated RF-TiO2, but only through heat treatment which is required to remove most of the ligands. The titania overlayer thickness was determined to be 1-2 monolayers for Ru3(CO)12 clusters on RF-TiO2, which is thin enough for catalytic or photocatalytic reactions to potentially occur even without clusters being part of the very outermost layer. The implication for catalysis of the encapsulation of Ru3 into the RF-TiO2 is discussed. Temperature-dependent X-ray photoelectron spectroscopy (XPS), angle-resolved XPS, and temperature-dependent low energy ion scattering (TD-LEIS) are used to probe how the cluster-surface interaction changes due to heat treatment and scanning transmission electron microscopy (STEM) was used to image the depth of the surface from side-on.

Maneuvering the Directional Charge Flow for Photoredox Organic Conversion

Transition-metal chalcogenide quantum dots (TMC QDs) show great promise in artificial photosynthesis for excellent light-harvesting capability. Nonetheless, TMC QDs have limitations of ultrafast charge recombination rate, sluggish carrier migration kinetics, and generic photocorrosion, retarding their widespread applications. To solve these obstacles, herein, we demonstrate the stimulation of charge migration over TMC QDs with the aid of nonconjugated insulating polymer and graphene (GR) for a versatile photoredox selective organic transformation. To this end, an ultrathin insulating polymer layer, i.e., poly(allylamine hydrochloride) (PAH), grafted on the GR framework, is electrostatically intercalated at the interface of TMCs QDs and the GR framework via a self-assembly for constructing TMC QDs/PAH/GR three-dimensional spatially multilayered heterostructures. In this well-defined nanoarchitecture, TMC QDs function as a light-harvesting antenna, GR as a terminal electron reservoir, and PAH as an intermediate interfacial charge relay mediator. We ascertain that the ultrathin PAH interim layer unexpectedly fosters the photoelectron migration from TMCs QDs to the GR framework in a tunable fashion, boosting the charge separation of TMCs QDs and resulting in significantly improved photoactivities toward anaerobic reduction of aromatic nitro compounds to amino derivatives and oxidation of alcohols to aldehydes under visible light. Photoredox catalysis mechanisms of such TMC QDs/PAH/GR photosystems are elucidated, and the active species in these photoredox organic conversion reactions are comprehensively determined. Our work would open new frontiers to finely modulate the charge transport of TMCs QDs via nonconjugated insulating polymers for solar energy conversion.

Constructing a noble-metal-free 0D/2D CdS/SnS2heterojunction for efficient visible-light-driven photocatalytic pollutant degradation and hydrogen generation

Semiconductor photocatalysis has attracted the attention of a wide audience for its outstanding capabilities in water purification and energy conversion. Herein, a noble-metal-free nanoheterojunction is created by planting zero-dimensional (0D) CdS nanograins, of 10-20 nm in size, on the surface of 2D SnS2nanosheets (NSs) using anin situchemical bathing deposition process, where SnS2NSs have an average diameter of 400 nm and thicknesses of less than 20 nm. The possible formation mechanism of the CdS/SnS2(CS/SS) heterogeneous nanostructure is elaborated upon. The catalytic activities over CS/SS nanocomposites for the photodegradation of organic dye and hydrogen evolution from photolysis water splitting are examined under visible light irradiation. The apparent rate constant (k) of the optimal CS/SS-3 composite in the decontamination of methylene blue (MB) is up to 3.34 and 1.87 times as high as that of pristine SnS2and pure CdS counterparts, respectively. The optimized CS/SS-3 sample consistently achieves the highest photocatalytic hydrogen production rate, at 10.3 and 5.7 folds higher than that of solo SnS2and CdS panels, respectively. The boosted photocatalytic capacities of CdS/SnS2heterostructures are essentially attributed to the formation of the closely interfacial incorporation of CdS and SnS2semiconductors, resulting in the effective charge transportation and spatial separation of the photoinduced electron-hole pairs. Furthermore, the traditional type-II charge transfer pathway is proposed based on the perfect band structure and the free radical experiment results.

Atomically precise AuxAg25-x nanoclusters with a modulated interstitial Au-Ag microenvironment for enhanced visible-light-driven photocatalytic hydrogen evolution

Herein, we report the study of atomically precise AuxAg25-x nanoclusters (NCs) toward photocatalytic hydrogen evolution. The incorporation of Au atoms into Ag25 NCs not only narrowed the HOMO-LUMO gaps but also created an interstitial Au-Ag microenvironment, which promoted the photogenerated charge carrier utilization and optimized the reaction dynamics.

Prussian blue analogue-derived hollow metal oxide heterostructure for high-performance supercapacitors

Supercapacitors (SCs) have been the subject of considerable interest because of their distinct advantages. The performance of SCs is directly affected by the electrode materials. Metal oxides derived from Prussian blue analogues (PBAs) are often used as electrode materials for SCs. Herein, we developed a multi-step strategy to fabricate ternary hollow metal oxide (CuO/NiO/Co3O4) heterostructures. The core-shell structured PBA (NiHCC@CuHCC) with Ni-based PBA (NiHCC) as the core and Cu-based PBA (CuHCC) as the shell was prepared by a crystal seed method. The ternary metal oxide (CuO/NiO/Co3O4) with a hollow structure was obtained by calcinating NiHCC@CuHCC. The prepared CuO/NiO/Co3O4 demonstrates an excellent specific capacitance of 262.5 F g-1 at 1 A g-1, which is 27.4% and 16.2% higher than those of CuO/Co3O4 and NiO/Co3O4, respectively. In addition, the material showed outstanding cycling stability with a capacitance retention of 107.9% after 3000 cycles. The two-electrode system constructed with CuO/NiO/Co3O4 and nitrogen-doped graphene hydrogel (NDGH) demonstrates a stable and high energy density of 27.1 W h kg-1 at a power density of 1037.5 W kg-1. The capacitance retention rate was 100.7% after 4000 cycles. The reason for the excellent electrochemical properties could be the synergistic effect of the introduced heterojunction of CuO/NiO, the hollow structure, and various metal oxides. This strategy can greatly inspire the construction of SC electrodes.

Recent Progress on Ligand-Protected Metal Nanoclusters in Photocatalysis

The reckless use of non-replenishable fuels by the growing population for energy and the resultant incessant emissions of hazardous gases and waste products into the atmosphere have insisted that scientists fabricate materials capable of managing these global threats at once. In recent studies, photocatalysis has been employed to focus on utilizing renewable solar energy to initiate chemical processes with the aid of semiconductors and highly selective catalysts. A wide range of nanoparticles has showcased promising photocatalytic properties. Metal nanoclusters (MNCs) with sizes below 2 nm, stabilized by ligands, show discrete energy levels and exhibit unique optoelectronic properties, which are vital to photocatalysis. In this review, we intend to compile information on the synthesis, true nature, and stability of the MNCs decorated with ligands and the varying photocatalytic efficiency of metal NCs concerning changes in the aforementioned domains. The review discusses the photocatalytic activity of atomically precise ligand-protected MNCs and their hybrids in the domain of energy conversion processes such as the photodegradation of dyes, the oxygen evolution reaction (ORR), the hydrogen evolution reaction (HER), and the CO₂ reduction reaction (CO₂RR).

A Revealing Insight into Gold Cluster Photocatalysts: Visible versus (Vacuum) Ultraviolet Light

[Au₂₅(PPh₃)₁₀(SC₂H₄Ph)₅Cl₂]²⁺ (Au25) supported on TiO₂ (P25) exhibited distinct photocatalytic behaviors in the oxidation of amines using visible or ultraviolet light. The activity under visible light (455 nm) was superior to that under ultraviolet light. To gain insight into the origin of this difference, we investigated the photoreaction pathways of Au25 isolated in the gas phase upon irradiation with a pulsed laser with wavelengths of 455, 193, and 154 nm. High-resolution mass spectrometry revealed photon energy-dependent pathways for Au25: dissociation of the PPh₃ ligands and PPh₃AuCl units at 455 nm, dissociation into small [Au_nS_m]⁺ ions (n = 3-20; m = 0-4) at 193 nm, and ionization affording the triply charged state at 154 nm. These results were substantiated by density functional theory simulations. On the basis of these results, we proposed that the inferior photocatalytic activity of Au25/P25 under ultraviolet light is mainly due to the poor photostability of Au25.

Structurally Flexible Au-Cu Alloy Nanoclusters Enabling Efficient Triplet Sensitization and Photon Upconversion

Ligand-protected noble-metal nanoclusters exhibit an innately triplet nature and have been recently recognized as emerging platforms for triplet sensitizers of photon upconversion (UC) via triplet-triplet annihilation. Herein, we report that a structurally flexible Au-Cu alloy nanocluster, [Au₄Cu₄(S-Adm)₅(DPPM)₂]⁺ (Au₄Cu₄; S-Adm = 1-adamantanethiolate, DPPM = bis(diphenylphosphino)methane), exhibited favorable sensitizer properties and superior UC performance. Contrary to the structurally rigid Au₂Cu₆(S-Adm)₆(TPP)₂ (Au₂Cu₆, TPP = triphenylphosphine), Au₄Cu₄ exhibited significantly better sensitizer characteristics, such as a near-unity quantum yield for intersystem crossing (ISC), long triplet lifetime (ca. 8 μs), and efficient triplet energy transfer (TET). The efficient ISC of Au₄Cu₄ was attributed to the practically negligible activation barriers during the ISC process, which was caused by the spin-orbit interaction between the two isoenergetic isomers predicted by theoretical calculations. A series of aromatic molecules with different triplet energies were used as acceptors to reveal the driving force dependence of the TET rate constant (k_TET). This dependency was analyzed to evaluate the triplet energy and sensitization ability of the alloy nanoclusters. The results showed that the maximum value of k_TET for Au₄Cu₄ was seven times larger than that for Au₂Cu₆, which presumably reflects the structural/electronic fluctuations of Au₄Cu₄ during the triplet state residence. The combination of the Au₄Cu₄ sensitizer and the 9,10-diphenylanthracene (DPA) annihilator/emitter achieved UC with internal quantum yields of 14% (out of 50% maximum) and extremely low threshold intensities (2-26 mWcm^-2). This performance far exceeds that of Au₂Cu₆ and is also outstanding among the organic-inorganic hybrid nanomaterials reported so far.

Synthesis of photocatalytic cysteine-capped Cu≈10 clusters using Cu5 clusters as catalysts

We report an easily scalable synthesis method for the preparation of cysteine-capped Cu_≈10 clusters through the reduction of Cu(II) ions with NaBH₄, using Cu₅ clusters as catalysts. The presence of such catalytic clusters allows controlling the formation of the larger Cu_≈10 clusters and prevents the production of copper oxides or Cu(I)-cysteine complexes, which are formed when Cu₅ is absent or at lower concentrations, respectively. These results indicate that small catalytic clusters could be involved, as precursor species before the reduction step, in the different methods developed for the synthesis of clusters. The visible light-absorbing Cu_≈10 clusters, obtained by the cluster-catalysed method, display high photocatalytic activities for the decomposition of methyl orange with visible light.

Alloy Metal Nanocluster: A Robust and Stable Photosensitizer for Steering Solar Water Oxidation

Metal nanoclusters (NCs) have been unleashed as an emerging category of metal materials by virtue of integrated merits including the unusual atom-stacking mode, quantum confinement effect, and fruitful catalytically active sites. Nonetheless, development of metal NCs as photosensitizers is blocked by light-induced instability and ultrashort carrier lifespan, which remarkably retards the design of metal NC-involved photosystems, hence resulting in the decreased photoactivities. To solve these obstacles, herein, we conceptually probed the charge transfer characteristics of the BiVO₄ photoanode photosensitized by atomically precise alloy metal NCs, wherein tailor-made l-glutathione-capped gold-silver bimetallic (AuAg) NCs were controllably self-assembled on the BiVO₄ substrate. It was uncovered that alien Ag atom doping is able to effectively stabilize the alloy AuAg NCs and simultaneously photosensitize the BiVO₄ photoanode, significantly boosting the photoelectrochemical (PEC) water oxidation performances. The reasons for the robust and stable PEC water oxidation activities of the AuAg NCs/BiVO₄ composite photoanode were unambiguously unleashed. We ascertain that Ag atom doping in the staple motif of Au_x NCs efficaciously protects the NCs from rapid oxidation, enhancing the photostability, boosting the photosensitization efficiency, and thus leading to the considerably improved PEC water splitting activities compared with the homometallic counterpart. This work could afford a new strategy to judiciously tackle the inherent detrimental instability of metal NCs for solar energy conversion.

Gold nanocluster with AIE: A novel photodynamic antibacterial and deodorant molecule

Designing long-lasting yet high-efficiency antimicrobial and deodorant agents is an everlasting goal for environmental and public health. Here we present the design of AIE-featured Au nanoclusters (NCs) for visible-light-driven antibacterial and deodorant applications. Owing to the intriguing AIE traits, the good harvest of visible-light, and rich surface chemistry, the AIE-featured Au NCs unprecedentedly exhibit excellent visible-light-driven antibacterial activities against gram-positive (≥98.5%) and gram-negative bacteria (≥99.94%), which is resulted from their photodynamic producibility of abundant reactive oxygen species including O₂^•-, •OH and H₂O₂ via O₂ reduction and subsequent H₂O₂ oxidation. In addition, the Au NCs are demonstrated to be biocompatible, and easy to be deployed for downstream antibacterial and deodorant applications. For example, the Au NCs-modified domestic materials (e.g., latex, ceramic glaze, organic fiber, and clothings) achieve long-lasting antibacterial efficiency of 99% and deodorant efficiency of >97.9% under visible-light irradiation. This work may shed light on designing novel AIE-featured metal NCs with photodynamic antibacterial and deodorant functions, enabling metal NCs and corresponding downstream materials to step into the photodynamic antibacterial and deodorant era.

Gold nanoclusters: Photophysical properties and photocatalytic applications

Atomically precise gold nanoclusters (Au NCs) have high specific surface area and abundant unsaturated active sites. Traditionally, Au NCs are employed as thermocatalysts for multielectron transfer redox catalysis. Meanwhile, Au NCs also exhibit discrete energy levels, tunable photophysical and electrochemical properties, including visible to near infrared absorption, microsecond long-lived excited-state lifetime, and redox chemistry. In recent years, Au NCs are increasingly employed as visible to near infrared photocatalysts for their high photocatalytic activity and unique selectivity. This review focuses on the photophysical properties of a variety of Au NCs and their employment as photocatalysts in photocatalytic reactions and related applications including solar energy conversion and photodynamic therapies.

A Review of State of the Art in Phosphine Ligated Gold Clusters and Application in Catalysis

Atomically precise gold clusters are highly desirable due to their well-defined structure which allows the study of structure-property relationships. In addition, they have potential in technological applications such as nanoscale catalysis. The structural, chemical, electronic, and optical properties of ligated gold clusters are strongly defined by the metal-ligand interaction and type of ligands. This critical feature renders gold-phosphine clusters unique and distinct from other ligand-protected gold clusters. The use of multidentate phosphines enables preparation of varying core sizes and exotic structures beyond regular polyhedrons. Weak gold-phosphorous (Au-P) bonding is advantageous for ligand exchange and removal for specific applications, such as catalysis, without agglomeration. The aim of this review is to provide a unified view of gold-phosphine clusters and to present an in-depth discussion on recent advances and key developments for these clusters. This review features the unique chemistry, structural, electronic, and optical properties of gold-phosphine clusters. Advanced characterization techniques, including synchrotron-based spectroscopy, have unraveled substantial effects of Au-P interaction on the composition-, structure-, and size-dependent properties. State-of-the-art theoretical calculations that reveal insights into experimental findings are also discussed. Finally, a discussion of the application of gold-phosphine clusters in catalysis is presented.

Precisely Modulating the Photosensitization Efficiency of Transition-Metal Chalcogenide Quantum Dots toward Solar Water Oxidation

Precisely modulating the spatial charge migration/separation constitutes the central issue in dictating the solar conversion efficiency of photoelectrochemical (PEC) cells, whereas it still remains a grand challenge. Here, we conceptually demonstrate the construction of hierarchically ordered metal oxide (MO)/transition-metal chalcogenide quantum dots (TMC QDs) multilayered heterostructured photoanodes, that is, MO/[TMC QDs(+)/TMC QDs(-)]_n (TMC QDs: CdTe, CdSe, CdS), by a simple and general bottom-up self-assembly route. Tailor-made intrinsically oppositely charged TMC QDs are alternately deposited on the highly ordered MO via a generic ligand-triggered electrostatic interaction to craft heterostructured photoanodes. The charge-transfer pathway stimulated by the photosensitization of TMC QDs is finely tuned by the assembly sequence. The advantageous multilayered nanoarchitecture renders the MO/[TMC QDs(+)/TMC QDs(-)]_n photoanodes exhibit substantially enhanced PEC performances under light irradiation, owing to the applicable energy-level configuration and peculiar combination fashion between building blocks and considerably boosted interfacial charge separation resulting from generating spatial tandem charge transport. Furthermore, photosensitization efficiency comparison among TMC QDs is comprehensively performed with PEC mechanisms elucidated.

The interaction of size-selected Ru3 clusters with RF-deposited TiO2: probing Ru-CO binding sites with CO-temperature programmed desorption

Small Ru clusters are efficient catalysts for chemical reactions such as CO hydrogenation. In this study 3-atom Ru3 clusters were deposited onto radio frequency (RF)-deposited TiO2 which is an inexpensive, nanoparticulate form of TiO2. TiO2 substrates are notable in that they form strong metal-substrate interactions with clusters. Using temperature programmed desorption to probe Ru-CO binding sites, and X-ray photoelectron spectroscopy to provide chemical information on clusters, differences in cluster-support interactions were studied for Ru3 deposited using both an ultra-high vacuum cluster source and chemical vapour deposition of Ru3(CO)12. The TiO2 was treated with different Ar+ sputter doses prior to cluster depositions, and SiO2 was also used as a comparison substrate. For cluster source-deposited Ru3, heating to 800 K caused cluster agglomeration on SiO2 and oxidation on non-sputtered TiO2. For cluster source-deposited Ru3 on sputtered TiO2 substrates, all Ru-CO binding sites were blocked as-deposited and it was concluded that for the binding sites to be preserved for potential catalytic benefit, sputtering of TiO2 before cluster deposition cannot be applied. Conversely, for Ru3(CO)12 on sputtered TiO2 the clusters were protected by their ligands and Ru-CO binding sites were only blocked once the sample was heated to 723 K. The mechanism for complete blocking of CO sites on sputtered TiO2 could not be directly determined; however, comparisons to the literature indicate that the likely reasons for blocking of the CO adsorption sites are encapsulation into the TiO x layer reduced through sputtering and also partial oxidation of the Ru clusters.

Photocatalytic activity of MnTiO3 perovskite nanodiscs for the removal of organic pollutants

MTO nanodiscs synthesized using the hydrothermal approach were explored for the photocatalytic removal of methylene blue (MB), rhodamine B (RhB), congo red (CR), and methyl orange (MO). The disc-like structures of ~16 nm thick and ~291 nm average diameter of stoichiometric MTO were rhombohedral in nature. The MTO nanodiscs delivered stable and recyclable photocatalytic activity under Xe lamp irradiation. The kinetic studies showed the 89.7, 80.4, 79.4, and 79.4 % degradation of MB, RhB, MO, and CR at the rate constants of 0.011(±0.001), 0.006(±0.001), 0.007(±0.0007), and 0.009 (±0.0001) min-1, respectively, after the 180 min of irradiation. The substantial function of photogenerated holes and hydroxide radicals pertaining to the dye removal phenomena is confirmed by radical scavenger trapping studies. Overall, the present studies provide a way to develop pristine and heterostructure perovskite for photocatalysts degradation of various organic wastes.

Interfacial Charge Transport in 1D TiO2 Based Photoelectrodes for Photoelectrochemical Water Splitting

1D nanostructured photoelectrodes are promising for application as photoelectrochemical (PEC) devices for solar energy conversion into hydrogen (H₂ ) owing to the optical, structural, and electronic advantages. Titanium dioxide (TiO₂ ) is the most investigated candidate as a photoelectrode due to its good photostability, low production cost, and eco-friendliness. The obstacle for TiO₂ 's practical application is the inherent wide bandgap (UV-lights response), poor conductivity, and limited hole diffusion length. Here, a comprehensive review of the current research efforts toward the development of 1D TiO₂ based photoelectrodes for heterogeneous PEC water splitting is provided along with a discussion of nanoarchitectures and energy band engineering influences on interfacial charge transfer and separation of 1D TiO₂ composited with different dimensional photoactive materials. The key focus of this review is to understand the charge transfer processes at interfaces and the relationship between photogenerated charge separation and photoelectrochemical performance. It is anticipated that this review will afford enriched information on the rational designs of nanoarchitectures, doping, and heterojunction interfaces for 1D TiO₂ based photoelectrodes to achieve highly efficient solar energy conversion.

Solvothermal preparation of Ti3+ self-doped TiO2-x nanotube arrays for enhanced photoelectrochemical performance

Ti³⁺ self-doped TiO_2-x nanotube arrays (TiO_2-x NTs) were prepared by solvothermal treatment in KBH₄ ethanol solution followed by calcination, and were characterized by field-emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and UV-vis diffusion reflection spectroscopy (DRS). The photoelectrochemical properties of TiO_2-x NTs prepared in different KBH₄ concentrations were investigated. The TiO_2-x NTs exhibited high visible light response, visible light photocurrent and photoelectrocatalytic activities. The active species and photocatalytic mechanism for the dye degradation were proposed, and the improved photoelectrochemical performance was attributed to the synergistic effect of the narrowed energy gap and enhanced electron transportation. The ability to improve the photoelectrochemical properties of TiO_2-x electrode materials should open up new opportunities for high-performance solar cells and photocatalysts.

Bifunctional black phosphorus: coupling with hematite for Z-scheme photocatalytic overall water splitting

Z-scheme 2D–2D BP/α-Fe₂O₃ heterostructure enables preferable photocatalytic properties for efficient overall water splitting under visible light.

Unexpected Boosted Solar Water Oxidation by Nonconjugated Polymer-Mediated Tandem Charge Transfer

Conjugated polymers are deemed as conductive carrier mediators for engendering the π electrons along the molecular framework, while the role of nonconjugated insulated polymers has been generally overlooked without the capability to participate in the solar-powered oxidation-reduction kinetics and charge-transfer process. Alternatively, considering the ultrashort charge lifetime and significant deficiency of metal nanocluster (NC)-based photosystems, the fine tuning of charge migration over atomically precise ultrasmall metal NCs as novel light-harvesting antennas has so far not yet been unleashed. Here, we unlock the charge-transfer capability of a nonconjugated polymer to modulate the charge flow over metal NCs (Au_x and Au₂₅) by such a solid-state nonconductive polymer via a conceptually new chemistry strategy by which l-glutathione (GSH)-capped gold (Au_x@GSH) NCs and poly(diallyl-dimethylammonium chloride) (PDDA) were alternately self-assembled on the metal oxide (MO: WO₃, Fe₂O₃, and TiO₂) substrates. The ultrathin nonconjugated PDDA interim layer periodically intercalated in-between Au_x (Au₂₅) NC layers concurrently serves as an unexpected charge-transfer mediator to foster the unidirectional electron flow from Au_x(Au₂₅) NCs to MOs by forming a tandem charge-transfer chain, hence endowing the multilayered MO/(PDDA-Au_x)_n heterostructures with significantly boosted photoelectrochemical water oxidation performance under light irradiation. The unanticipated role of PDDA as a cascade charge mediator is demonstrated to be universal. Our work would unlock the potential charge-transport capability of nonconjugated polymers as a novel charge mediator for solar-to-chemical conversion.

A CeO2 Semiconductor as a Photocatalytic and Photoelectrocatalytic Material for the Remediation of Pollutants in Industrial Wastewater: A Review

The direct discharge of industrial wastewater into the environment results in serious contamination. Photocatalytic treatment with the application of sunlight and its enhancement by coupling with electrocatalytic degradation offers an inexpensive and green technology enabling the total removal of refractory pollutants such as surfactants, pharmaceuticals, pesticides, textile dyes, and heavy metals, from industrial wastewater. Among metal oxide—semiconductors, cerium dioxide (CeO2) is one of the photocatalysts most commonly applied in pollutant degradation. CeO2 exhibits promising photocatalytic activity. Nonetheless, the position of conduction bands (CB) and valence bands (VB) in CeO2 limits its application as an efficient photocatalyst utilizing solar energy. Its photocatalytic activity in wastewater treatment can be improved by various modification techniques, including changes in morphology, doping with metal cation dopants and non-metal dopants, coupling with other semiconductors, and combining it with carbon supporting materials. This paper presents a general overview of CeO2 application as a single or composite photocatalyst in the treatment of various pollutants. The photocatalytic characteristics of CeO2 and its composites are described. The main photocatalytic reactions with the participation of CeO2 under UV and VIS irradiation are presented. This review summarizes the existing knowledge, with a particular focus on the main experimental conditions employed in the photocatalytic and photoelectrocatalytic degradation of various pollutants with the application of CeO2 as a single and composite photocatalyst.

A Microorganism Bred TiO2/Au/TiO2 Heterostructure for Whispering Gallery Mode Resonance Assisted Plasmonic Photocatalysis

The TiO₂/Au nanostructure has been acknowledged as one of the most classic visible-light active photocatalysts due to the surface plasmon resonance (SPR) of Au nanoparticles. In many cases, the SPR effect only features weak visible light absorption in conventional TiO₂/Au nanostructures. Here, we demonstrate a design of TiO₂/Au/TiO₂ with a combination of whispering gallery mode (WGM) resonances and SPR for efficient visible-light-driven photocatalysis. Escherichia coli (E. coli) were used as natural reactants as well as a template to construct an E. coli-like TiO₂/Au/TiO₂ nanostructure. Using numerical simulations, we show that the E. coli-like TiO₂ capsule acts as the WGM resonator to interplay with the SPR effect of the Au NPs on TiO₂ surface, which leads to a significant increase of visible light absorption and the local field enhancement at the Au-TiO₂ interface. Accordingly, with the synergistic effect of WGM and SPR, the E. coli-like TiO₂/Au/TiO₂ nanostructure exhibits enhanced photocatalytic activity in the visible range. Our work reveals a promising bioapproach to a design highly visible light active plasmonic photocatalyst.

Visible Light-Enhanced Antibacterial and Osteogenic Functionality of Au and Pt Nanoparticles Deposited on TiO2 Nanotubes

This study aimed at evaluating the visible light mediated antimicrobial and osteogenic applications of noble metal, such as gold (Au) and platinum (Pt) coated titania (TiO₂) nanotubes (NTs). In this study, the Au and Pt nanoparticles (NPs) were deposited on anodized 100 nm TiO₂ NTs by ion plasma sputtering. The Au and Pt NPs were mainly deposited on the top surface layer of TiO₂ NTs and showed light absorbance peaks around the 470 and 600 nm visible light region used in this study, as seen from the surface characterization. From the results of antibacterial activity test, Au and Pt NPs that were deposited on TiO₂ NTs showed excellent antibacterial activity under 470 nm visible light irradiation due to the plasmonic photocatalysis based on the localized surface plasmon resonance effect of the Au and Pt NPs. In addition, alkaline phosphate activity test and quantitative real-time PCR assay of osteogenic related genes resulted that these NPs promoted the osteogenic functionality of human mesenchymal stem cells (hMSCs) under 600 nm visible light irradiation, because of the synergic effect of the photothermal scattering of noble metal nanoparticles and visible light low-level laser therapy (LLLT). Therefore, the combination of noble metal coated TiO₂ NTs and visible light irradiation would be expected to perform permanent antibacterial activity without the need of an antibacterial agent besides promoting osteogenic functionality.

g-C3N4- and polyaniline-co-modified TiO2 nanotube arrays for significantly enhanced photocatalytic degradation of tetrabromobisphenol A under visible light

An ordered g-C₃N₄- and polyaniline-modified titanium oxide nanotube array (g-C₃N₄- and PANI-co-modified TiO₂ NTAs) was successfully synthesized and used as a photocatalyst. Polyaniline (PANI) was coated onto TiO₂ NTAs by electrochemical polycondensation, and g-C₃N₄ was deposited via the soaking adsorption method. The photocatalysts were examined by several technologies. The experiments demonstrated that the amount of g-C₃N₄ and PANI, as well as the initial pH value, had significant effects on the photocatalytic efficiency. The resulting photocatalysts exhibited high visible light photocatalytic ability for tetrabromobisphenol A (TBBPA) for two reasons. First, PANI expanded the light absorption into the visible region. Second, rapid and efficient separation of photoinduced charges from the photogenerated potential difference were produced at the contact interface of g-C₃N₄ and PANI-co-modified TiO₂ NTAs. The •OH, [Formula: see text] and h⁺ were dominant components for the photocatalytic degradation of TBBPA. In addition, the g-C₃N₄ and PANI-co-modified TiO₂ NTAs have excellent long-term stability.

General Layer-by-Layer Assembly of Multilayered Photoanodes: Triggering Tandem Charge Transport toward Photoelectrochemical Water Oxidation

Modulation of photoinduced charge separation/migration and construction of controllable charge transfer pathway over photoelectrodes have been attracting enduring interest in semiconductor-based photoelectrochemical (PEC) cells but suffer from sluggish charge transport kinetics. Here, we report a general approach to fabricate NP-TNTAs/(TMCs QDs/PSS)_n (X = Te, Se, S) photoanodes via a facile and green electrostatic layer-by-layer (LbL) self-assembly strategy, for which transition-metal chalcogenides quantum dots (TMCs QDs) [CdX (X = Se, Te, S)] and poly(sodium 4-styrenesulfonate) (PSS) were periodically deposited on the nanoporous TiO₂ nanotube arrays (NP-TNTAs) via substantial electrostatic force, resulting in the continuous charge transfer pathway. NP-TNTAs/(TMCs QDs/PSS)_n photoanodes demonstrate significantly enhanced solar-driven photoelectrochemical (PEC) water oxidation activities, relative to NP-TNTAs and TMCs QDs under visible and simulated sunlight irradiation, predominantly because of the suitable energy level configuration between NP-TNTAs and TMCs QDs, unique integration mode, and high-speed interfacial charge separation rate endowed by LbL assembly. The ultrathin PSS intermediate layer functions as "molecule glue" for pinpoint and uniform self-assembly of TMCs QDs on the framework of NP-TNTAs and photosensitization effect of TMCs QDs triggers the unidirectional charge transfer cascade, synergistically boosting the charge separation/transfer efficiency. Our work offers an efficacious approach to craft multilayered photoelectrodes and spur further interest in finely tuning the spatial charge flow in PEC cell for solar-to-hydrogen conversion.

Metal Clusters on Semiconductor Surfaces and Application in Catalysis with a Focus on Au and Ru

Metal clusters typically consist of two to a few hundred atoms and have unique properties that change with the type and number of atoms that form the cluster. Metal clusters can be generated with a precise number of atoms, and therefore have specific size, shape, and electronic structures. When metal clusters are deposited onto a substrate, their shape and electronic structure depend on the interaction with the substrate surface and thus depend on the properties of both the clusters and those of the substrate. Deposited metal clusters have discrete, individual electron energy levels that differ from the electron energy levels in the constituting individual atoms, isolated clusters, and the respective bulk material. The properties of clusters with a focus on Au and Ru, the methods to generate metal clusters, and the methods of deposition of clusters onto substrate surfaces are covered. The properties of cluster-modified surfaces are important for their application. The main application covered here is catalysis, and the methods for characterization of the cluster-modified surfaces are described.

Insights into Charge Transfer at an Atomically Precise Nanocluster/Semiconductor Interface

The deposition of an atomically precise nanocluster, for example, Ag₄₄(SR)₃₀, onto a large‐band‐gap semiconductor such as TiO₂ allows a clear interface to be obtained to study charge transfer at the interface. Changing the light source from visible light to simulated sunlight led to a three orders of magnitude enhancement in the photocatalytic H₂ generation, with the H₂ production rate reaching 7.4 mmol h⁻¹ g_catalyst⁻¹. This is five times higher than that of TiO₂ modified with Ag nanoparticles and even comparable to that of TiO₂ modified with Pt nanoparticles under similar conditions. Energy band alignment and transient absorption spectroscopy reveal that the role of the metal clusters is different from that of both organometallic complexes and plasmonic nanoparticles: A type II heterojunction charge‐transfer route is achieved under UV/Vis irradiation, with the cluster serving as a small‐band‐gap semiconductor. This results in the clusters acting as co‐catalysts rather than merely photosensitizers.

An Efficient Photocatalyst Based on Black TiO2 Nanoparticles and Porous Carbon with High Surface Area: Degradation of Antibiotics and Organic Pollutants in Water

Porous carbon (PC) materials with high surface area can separate electron-hole pairs and adsorb organic pollutants more effectively. A series of nanocomposites were prepared by anchoring black TiO₂ nanoparticles (BTN) onto PC through a calcination process. Chemical and structural features of samples were examined by X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, powder X-ray diffraction (P-XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analyses. The resulting adsorption-photocatalysis synergistic effect led to a dramatically improved photocurrent for BTN@PCs, thus indicating the high photocatalytic performance toward water-soluble organic species. For instance, the degradation of tetracycline under visible light reached 90 %, which is higher than that for activated carbon doped onto BTN (57 %) without any additional agents. Moreover, the degradation of other antibiotics (such as oxytetracycline and ciprofloxacin) and methylene blue were also studied, thus showing that this system has the potential to be used for water treatment.

An overview on the current understanding of the photophysical properties of metal nanoclusters and their potential applications

Photophysics of atomically precise metal nanoclusters (MNCs) is an emerging area of research due to their potential applications in optoelectronics, photovoltaics, sensing, bio-imaging and catalysis. An overview of the recent advances in the photophysical properties of MNCs is presented in this review. To begin with, we illustrate general synthesis methodologies of MNCs using direct reduction, chemical etching, ligand exchange, metal exchange and intercluster reaction. Due to strong quantum confinement, the NCs possess unique electronic properties such as discrete optical absorption, intense photoluminescence (PL), molecular-like electron dynamics and non-linear optical behavior. Discussions have also been carried out to unveil the influence of the core size, nature of ligands, heteroatom doping, and surrounding environments on the optical absorption and photophysical properties of metal clusters. Recent findings reveal that the excited-state dynamics, nonlinear optical properties and aggregation induced emission of metal clusters offer exciting opportunities for potential applications. We discuss briefly about their versatile applications in optoelectronics, sensing, catalysis and bio-imaging. Finally, the future perspective of this research field is given.