Asymmetric block copolymers for supramolecular templating of inorganic nanospace materials

Photocatalytic Hydrogen Evolution Using Mesoporous Honeycomb Iron Titanate

Mesoporous honeycomb iron titanate using a sol-gel, evaporation-induced self-assembly method is synthesized. A triblock copolymer, F127, serves as a structure-directing agents, with iron chloride and titanium (IV) isopropoxide as inorganic precursors. The strong intermolecular force of attraction among urea, metal precursors, and polymer led to the formation of the mesoporous honeycomb structure. The study of physicochemical properties using different techniques reveals the formation of microstructures with a remarkable degree of porosity. The amorphous iron titanate outperforms the photochemical generation of H2 due to its disorderly structural arrangement and incomplete crystal formation. The randomness on the structure provides more area for catalytic reaction by providing more contact with the reactant and superior light absorption capability. The high amount of hydrogen gas, 40.66 mmolg-1h-1, is observed in the investigation over 3 h of activity for the iron titanate honeycomb sample. This yield is a more significant amount compared to the obtained for the commercially available TiO2 (23.78 mmolg-1h-1). The iron titanate materials synthesized with low-cost materials and methods are very effective and have the potential for hydrogen generation.

An Emerging Trend in the Synthesis of Iron Titanate Photocatalyst Toward Water Splitting

Hydrogen gas is a prominent focus in pursuing renewable and clean alternative energy sources. The quest for maximizing hydrogen production yield involves the exploration of an ideal photocatalyst and the development of a simple, cost-effective technique for its generation. Iron titanate has garnered attention in this context due to its photocatalytic properties, affordability, and non-toxic nature. Over the years, different synthesis routes, different morphologies, and some modifications of iron titanate have been carried out to improve its photocatalytic performance by enhancing light absorption in the visible region, boosting charge carrier transfer, and decreasing recombination of electrons and holes. The use of iron titanate photocatalyst for hydrogen evolution reaction has seen an upward trend in recent times, and based on available findings, more can be done to improve the performance. This review paper provides a comprehensive overview of the fundamental principles of photocatalysis for hydrogen generation, encompassing the synthesis, morphology, and application of iron titanate-based photocatalysts. The discussion delves into the limitations of current methodologies and present and future perspectives for advancing iron titanate photocatalysts. By addressing these limitations and contemplating future directions, the aim is to enhance the properties of materials fabricated for photocatalytic water splitting.

Single-Micelle-Templated Synthesis of Hollow Barium Carbonate Nanoparticle for Drug Delivery

A laboratory-synthesized triblock copolymer poly(ethylene oxide-b-acrylic acid-b-styrene) (PEG-PAA-PS) was used as a template to synthesize hollow BaCO3 nanoparticles (BC-NPs). The triblock copolymer was synthesized using reversible addition–fragmentation chain transfer radical polymerization. The triblock copolymer has a molecular weight of 1.88 × 104 g/mol. Transmission electron microscopy measurements confirm the formation of spherical micelles with a PEG corona, PAA shell, and PS core in an aqueous solution. Furthermore, the dynamic light scattering experiment revealed the electrostatic interaction of Ba2+ ions with an anionic poly(acrylic acid) block of the micelles. The controlled precipitation of BaCO3 around spherical polymeric micelles followed by calcination allows for the synthesis of hollow BC-NPs with cavity diameters of 15 nm and a shell thickness of 5 nm. The encapsulation and release of methotrexate from hollow BC-NPs at pH 7.4 was studied. The cell viability experiments indicate the possibility of BC-NPs maintaining biocompatibility for a prolonged time.

Porous Tungsten Oxide: Recent Advances in Design, Synthesis, and Applications

Tungsten oxide (WO₃ ) has received ever more attention and has been highly researched over the last decade due to its being a low-cost transition metal semiconductor with tunable, yet widely stable, band gaps. This minireview briefly highlights the challenges in the design and synthesis of porous WO₃ including methods, precursors, solvent effects, crystal phases, and surface activities of the porous WO₃ base material. These topics are explored while also drawing a connection of how the morphology and crystal phase affect the band gap. The shifts in band gap not only impact the optical properties of tungsten but also allow tuning to operate on different energy levels, which makes WO₃ highly desirable in many applications such as supercapacitors, batteries, solar cells, catalysts, sensors, smart windows, and bioapplications.

Enhanced γ-phase crystallinity of Al2O3 frameworks at the concave surface of PS-b-PEO templated spherical pores

The crystallinity of inorganic solids like metal oxides after the porosity design is the crucial factor that should be investigated for enhancing their physicochemical properties. In most cases, metal oxide frameworks around mesopores, that are designed through the supramolecular mediated approach, are resulted to be amorphous. Accordingly, a rational guideline has been required for enhancing the crystallinity of frameworks at such concave surfaces. We have so far surveyed a crystallization behavior of alumina (Al2O3) frameworks to its γ-phase around spherical mesopores (∼40 nm) and discussed further transition to the α-phase around much larger pores (∼200 nm). In this paper, we prepared new and helpful Al2O3 powders having PS-b-PEO templated pores (∼25 nm and ∼75 nm) smaller than those of our previous case. After careful discussion of the pore size variation by considering the molecular structure of PS-b-PEO, we explained the crystallization behavior of the Al2O3 frameworks to enhance its γ-crystallinity. This knowledge is quite beneficial for designing highly porous Al2O3 powders with abundant crystallinity for use as catalyst supports, which is very useful for assessing synthetic procedures of other mesoporous metal oxides having high crystallinity.

Metal-incorporated mesoporous oxides: Synthesis and applications

Mesoporous oxides are outstanding metal nanoparticle catalyst supports owing to their well-defined porous structures. Such mesoporous architectures not only prevent the aggregation of metal nanoparticles but also enhance their catalytic performance. Metal/metal oxide heterojunctions exhibit unique chemical and physical properties because of the surface reconstruction around the junction and electron transfer/interaction across the interface. This article reviews the methods used for synthesizing metal-supported hybrid nanostructures and their applications as catalysts for environmental remediation and sensors for detecting hazardous materials.

Facile synthesis of a mesoporous TiO2 film templated by a block copolymer for photocatalytic applications

Large-sized mesoporous TiO2 through a polymeric micelle assembly approach for photocatalysts.

Highly porous α-alumina powders prepared with the self-assembly of an asymmetric PS-b-PEO diblock copolymer

Crystallization to γ-Al₂O₃ followed by transformation to α-Al₂O₃ was achieved around PS-b-PEO templated extra-large pores having low surface curvature.

Facile one-step dialysis strategy for fabrication of hollow complex nanoparticles

A facile one-step dialysis method was developed for preparing hollow complex nanoparticles.

Polymer Capsules for Enzymatic Catalysis in Confined Environments

Catalysis is at the base of a series of biological and technological application processes. In recent years, the tendency has developed to carry out catalyzed reactions within confined structures, thus forming systems called micro or nanoreactors. Compartmentalized structures are cavities delimited by a wall where specific functions are introduced with a defined concentration and in the desired sites. These containers are generally referred to as nano or microcapsules, assuming the function of reactors in the presence of chemical reactions. Among the various types of existing structures, one of the most interesting is represented by systems made with polymers. This review aims to highlight some of the current advances in the use of functionalized structures that are useful for catalysis reactions, paying particular attention to polymer capsules and enzymes. The built-up methods used for the production of polymer capsules, as well as the aspects that influence membrane permeability and reactivity to environmental conditions, are discussed. Recent advances on biocatalysis confined in polymeric capsules are illustrated, and the strengths and weaknesses of the principal nanoreactors are considered.

Controlled Synthesis of Carbon Nanospheres via the Modulation of the Hydrophilic Length of the Assembled Surfactant Micelles

A co-polymerization-carbonization method was employed to synthesize porous carbon nanospheres (PCNSs) using pyrrole-aniline polymers as a carbon source and alkyl phenol non-ionic surfactants as templates. The effect of the hydrophilic length on the carbon nanosphere size was systematically investigated. The so-prepared PCNSs were characterized via high-magnification scanning electron microscopy, dynamic light scattering (DLS) analysis, and N₂ adsorption and desorption analysis. The results indicate that the obtained nanosphere diameter can be tuned by changing the length of the hydrophilic groups. The length of the hydrophilic groups mainly affects the size of the vesicles or micelles formed by the assembly of the surfactant in solution, as was verified by the DLS results. After activation by KOH, the typical sample EO(30)-PCNS has a high specific surface area of 2137 m²/g and a large pore volume of 1.76 cm³/g. Electrochemical tests in 6 M KOH demonstrated that the assembled EO(30)-PCNS supercapacitor electrode displays good capacitive properties, such as a high specific capacitance of 221 F/g at 1.0 A/g and a good rate capacity of 68% retention at 10.0 A/g. This finding suggests that the uniform particle shape and high specific surface area are beneficial for the ion transportation, leading to good electrochemical performances. Our work provides a novel synthetic strategy for the fabrication of carbon nanospheres or other nanosphere materials for the construction of high-performance supercapacitors by optimizing few parameters, such as the length of the hydrophilic or hydrophobic groups of the surfactants.

Electrochemical Deposition: An Advanced Approach for Templated Synthesis of Nanoporous Metal Architectures

Well-constructed porous materials take an essential role in a wide range of applications, including energy conversion and storage systems, electrocatalysis, photocatalysis, and sensing. Although the tailored design of various nanoarchitectures has made substantial progress, simpler preparation methods are compelled to meet large-scale production requirements. Recently, advanced electrochemical deposition techniques have had a significant impact in terms of precise control upon the nanoporous architecture (i.e., pore size, surface area, pore structure, etc.), enabling access to a wide range of compositions. In this Account, we showcase the uniqueness of electrochemical deposition techniques, detail their implementation toward the synthesis of novel nanoporous metals, and finally outline the future research directions. Nanoporous metallic structures are attractive in that they can provide high surface area and large pore volume, easing mass transport of reactants and providing high accessibility to catalytically active metal surface. The great merit of the electrochemical deposition approach does not only lie in its versatility, being applicable to a wide range of compositions, but also in the nanoscale precision it affords when it comes to crystal growth control, which cannot be easily achieved by other bottom-up or top-down approaches. In this Account, we describe the significant progress made in the field of nanoporous metal designed through electrochemical deposition approaches using hard templates (i.e., porous silica, 3D templates of polymer and silica colloids) and soft templates (i.e., lyotropic liquid crystals, polymeric micelles). In addition, we will point out how it accounts for precise control over the crystal growth and describe the unique physical and chemical properties emerging from these novel materials. Up to date, our group has reported the synthesis of several nanoporous metals and alloys (e.g., Cu, Ru, Rh, Pd, Pt, Au, and their corresponding alloys) under various conditions through electrochemical deposition, while investigating their various potential applications. The orientation of the channel structure, the composition, and the nanoporosity can be easily controlled by selecting the appropriate surfactants or block copolymers. The inherent properties of the final product, such as framework crystallinity, catalytic activity, and resistance to oxidation, are depending on both the composition and pore structure, which in turn require suitable electrochemical conditions. This Account is divided into three main sections: (i) a history of electrochemical deposition using hard and soft templates, (ii) a description of the important mechanisms involved in the preparation of nanoporous materials, and (iii) a conclusion and future perspectives. We believe that this Account will promote a deeper understanding of the synthesis of nanoporous metals using electrochemical deposition methods, thus enabling new pathways to control nanoporous architectures and optimize their performance toward promising applications such as catalysis, energy storage, sensors, and so forth.

Gold nanoparticles supported on mesoporous iron oxide for enhanced CO oxidation reaction

Herein, we report the synthesis of gold (Au)-loaded mesoporous iron oxide (Fe₂O₃) as a catalyst for both CO and NH₃ oxidation. The mesoporous Fe₂O₃ is firstly prepared using polymeric micelles made of an asymmetric triblock copolymer poly(styrene-b-acrylic acid-b-ethylene glycol) (PS-b-PAA-b-PEG). Owing to its unique porous structure and large surface area (87.0 m² g^-1), the as-prepared mesoporous Fe₂O₃ can be loaded with a considerably higher amount of Au nanoparticles (Au NPs) (7.9 wt%) compared to the commercial Fe₂O₃ powder (0.8 wt%). Following the Au loading, the mesoporous Fe₂O₃ structure is still well-retained and Au NPs with varying sizes of 3-10 nm are dispersed throughout the mesoporous support. When evaluated for CO oxidation, the Au-loaded mesoporous Fe₂O₃ catalyst shows up to 20% higher CO conversion efficiency compared to the commercial Au/Fe₂O₃ catalyst, especially at lower temperatures (25-150 °C), suggesting the promising potential of this catalyst for low-temperature CO oxidation. Furthermore, the Au-loaded mesoporous Fe₂O₃ catalyst also displays a higher catalytic activity for NH₃ oxidation with a respectable conversion efficiency of 37.4% compared to the commercial Au/Fe₂O₃ catalyst (15.6%) at 200 °C. The significant enhancement in the catalytic performance of the Au-loaded mesoporous Fe₂O₃ catalyst for both CO and NH₃ oxidation may be attributed to the improved dispersion of the Au NPs and enhanced diffusivity of the reactant molecules due to the presence of mesopores and a higher oxygen activation rate contributed by the increased number of active sites, respectively.

Systematic design and application of unimolecular star-like block copolymer micelles: a coarse-grained simulation study

Unimolecular polymeric micelles have several features, such as thermodynamic stability, small particle size, biocompatibility, and the ability to internalize hydrophobic molecules. These micelles have recently attracted significant attention in various applications, such as nano-reactors, catalysis, and drug delivery. However, few attempts have explored the formation mechanisms and conditions of unimolecular micelles due to limited experimental techniques. In this study, a unimolecular micelle system formed from β-cyclodextrin-graft-{poly(lactide)-block-poly(2-(dimethylamino) ethyl multimethacrylate)-block-poly[oligo (2-ethyl-2-oxazoline) methacrylate]} β-CD-g-(PLA-b-PDMAEMA-b-PEtOxMA) star-like block copolymers in aqueous media was investigated by dissipative particle dynamics (DPD) to explore the formation process of unimolecular micelles. The simulation results showed that using longer hydrophobic or pH-sensitive chains, shorter hydrophilic backbones, smaller hydrophilic side chain grafting density, and fewer polymer arms resulted in micellar aggregation. Furthermore, this unimolecular polymeric micelle could be used for encapsulating gold nanoparticles, whose mesoscopic structure was also explored. The gold nanoparticles tended to distribute in the middle layer formed by PDMAEMA, and the unimolecular micelles were capable of impeding gold nanoparticle aggregation. This study could help understand the formation mechanism of unimolecular micelles formed from star-like block copolymers in dilute solutions and offer a theoretical guide to the design and preparation of promising unimolecular polymeric micelles with targeting properties.

Cavitation-enabled rapid and tunable evolution of high-χN micelles as templates for ordered mesoporous oxides

The kinetic-entrapment of block copolymer micelles enables size-persistence, however tuning micelle sizes under such conditions remains challenging. Agitation-induced chain exchange via vortexing is limited by the production of solution-air interfaces. Here, we use ultrasonic cavitation for rapid interface production that accelerates micelle growth by an order of magnitude over vortexing.

Evaporation-induced Self-assembly Process Controlled for Obtaining Highly Ordered Mesoporous Materials with Demanded Morphologies

A large number of periodic mesoporous materials have been reported using amphiphilic organic molecules with increasing development of synthetic methods for mesostructural, morphological, and compositional designs. The evaporation-induced self-assembly (ESIA) process to fabricate ordered mesoporous films is one of the most essential synthetic methods, which has extensively been applied for obtaining a wide variety of samples (e.g., films and monoliths, including powders). It contains complicated physical variations and chemical reactions, but has been simply explained by several research groups. However, a current, exact understanding of such complicated systems should be given with respect to all the variations and reactions. In this article, I have mainly surveyed the exact EISA process by considering the difference between simple and controlled EISA processes on the basis of my own experiments. I believe that the insights are consequently helpful for obtaining highly ordered mesoporous materials with demanded morphologies.

Multi-Stimuli-Responsive Polymeric Materials

Stimuli-responsive materials are of immense importance because of their ability to undergo alteration of their properties in response to their environment. The properties of such materials can be tuned by subtle adjustments in temperature, pH, light, and so forth. Among such smart materials, multi-stimuli-responsive polymeric materials are of pronounced significance as they offer a wide range of applications and their properties can be tuned through several mechanisms. Here, we aim to highlight some recent studies showcasing the multi-stimuli-responsive character of these polymers, which are still relatively little known compared to their single-stimuli-responsive counterpart.

Well-organized meso-macroporous TiO2/SiO2 film derived from amphiphilic rubbery comb copolymer

We report the facile synthesis of a well-organized meso-macroporous TiO2/SiO2 thin film with high porosity and good interconnectivity from a binary mixture (i.e., titania precursor and polymer template). Our process is based on self-assembly of the amphiphilic rubbery comb copolymer, poly(dimethylsiloxane)-g-poly(oxyethylene methacrylate) (PDMS-g-POEM) with titanium tetraisopropoxide (TTIP). SiO2 is self-provided by thermal oxidation of PDMS chains during calcination under air. The selective, preferential interaction between TTIP and the hydrophilic POEM chains was responsible for the formation of well-organized TiO2/SiO2 films, as supported by transmission electron microscopy, scanning electron microscopy, X-ray photospectroscopy, and X-ray diffraction analyses. We investigated in detail the effect of precursor content, solvent type, and polymer concentration on thin film morphology. Photodegradation of methyl orange by the well-organized meso-macroporous TiO2/SiO2 film was greater than that of a dense TiO2 film prepared without PDMS-g-POEM as well as a SiO2-etched TiO2 film. These results indicate that the well-organized structure and SiO2 doping of the TiO2 film play a pivotal role in enhancing its photocatalytic properties.

In situ observation of the evaporation-induced self-assembling process of PS-b-PEO diblock copolymers for the fabrication of titania films by confocal laser scanning microscopy

The formation of PS-b-PEO micelles was directly observed by CLSM at the initial stage of the drying process for fabricating a highly porous titania film.

Mesoporous TiO2/Zn2Ti3O8 hybrid films synthesized by polymeric micelle assembly

A hybrid mesoporous TiO₂/Zn₂Ti₃O₈ film synthesized by a polymeric micelle assembly approach.

A dual soft-template synthesis of hollow mesoporous silica spheres decorated with Pt nanoparticles as a CO oxidation catalyst

Hollow mesoporous silica spheres decorated with fine Pt nanoparticles are prepared through a dual soft-template system and used as a catalyst for high-temperature CO oxidation.