Cactus-Like Hollow Cu2-x S@Ru Nanoplates as Excellent and Robust Electrocatalysts for the Alkaline Hydrogen Evolution Reaction

Inhomogeneous Au2S for Photoacoustic Imaging and Photodynamic Tumor Therapy Based on Different Forms of Energy Dissipation

Nanomaterials with unique structures and components play a crucial role in nanomedicine. In this study, we discovered that the inhomogeneous Au2S constructed by cation exchange and acid etching could dissipate energy in different forms after absorbing multichromatic light, which could be used to achieve the integrated diagnosis and treatment of tumors, respectively. Folic acid modified Au2S ringed nanoparticles (FA-Au2S RNs) with an assembly-like structure were demonstrated to result in better PA imaging performance and generate more reactive oxygen species (O2·-, ·OH, and 1O2) than folic acid modified Au2S triangular nanoparticles (FA-Au2S TNs). Finite element analyses determined the reason for the high absorbance properties and synergistic enhancement of plasma resonance in the assembly-like structure of Au2S RNs. Both FA-Au2S nanostructures were modified with folic acid and injected into 4T1 tumor-bearing mice via the tail vein. The best PA imaging contrast was obtained under 700 nm laser illumination, and the most effective PDT antitumor activity was achieved under 1064 nm laser illumination. The PA average of the tumor in the FA-Au2S RN group was approximately 2 times higher than that of the FA-Au2S TN group at 24 h of injection. The PA imaging results of intratumorally injected FA-Au2S RNs proved that they were still able to show better PA signal enhancement at 24 h postinjection. Our study demonstrates that FA-Au2S nanomaterials with unique structures and special properties can be reliably produced using strictly controlled chemical synthesis. It further provides a strategy for the construction of highly sensitive PA imaging platforms and efficient PDT antitumor agents that exploit wavelength-dependent energy dissipation mechanisms.

Immobilizing Bimetallic RuCo Nanoalloys on Few-Layered MXene as a Robust Bifunctional Electrocatalyst for Overall Water Splitting

Doping Co atoms into Ru lattices can tune the electronic structure of active sites, and the conductive MXene can adjust the electrical conductivity of catalysts, which are both favorable for improving the electrocatalytic activity of the catalyst for water splitting. Here, ruthenium-cobalt bimetallic nanoalloys coupled with exfoliated Ti3 C2 Tx MXene (RuCo-Ti3 C2 Tx ) have been constructed by ice-templated and thermal activation. Due to the strong interaction between the RuCo nanoalloys and conductive MXene, RuCo-Ti3 C2 Tx not only exhibits an excellent hydrogen evolution reaction (HER) performance with a low overpotential and Tafel slope (60 mV, 34.8 mV dec-1 in 0.5 M H2 SO4 and 52 mV, 38.7 mV dec-1 in 1 M KOH), but also good oxygen evolution reaction (OER) performance in an alkaline electrolyte (266 mV, 111.1 mV dec-1 in 1 M KOH). The assembled RuCo-Ti3 C2 Tx ||RuCo-Ti3 C2 Tx electrolyzer requires a lower potential (1.56 V) than does the Pt/C||RuO2 electrolyzer at 10 mA cm-2 . A boosted catalytic HER activity from immobilizing the RuCo nanoalloys on MXene was unveiled by density functional theory calculations. This study provides a feasible and efficient strategy for developing MXene-based catalysts for overall water splitting.

Correlating Single-Atomic Ruthenium Interdistance with Long-Range Interaction Boosts Hydrogen Evolution Reaction Kinetics

Correlated single-atom catalysts (c-SACs) with tailored intersite metal-metal interactions are superior to conventional catalysts with isolated metal sites. However, precise quantification of the single-atomic interdistance (SAD) in c-SACs is not yet achieved, which is essential for a crucial understanding and remarkable improvement of the correlated metal-site-governed catalytic reaction kinetics. Here, three Ru c-SACs are fabricated with precise SAD using a planar organometallic molecular design and π-π molecule-carbon nanotube confinement. This strategy results in graded SAD from 2.4 to 9.3 Å in the Ru c-SACs, wherein tailoring the Ru SAD into 7.0 Å generates an exceptionally high turnover frequency of 17.92 H2 s-1 and a remarkable mass activity of 100.4 A mg-1 under 50 and 100 mV overpotentials, respectively, which is superior to all the Ru-based catalysts reported previously. Furthermore, density functional theory calculations confirm that Ru SAD has a negative correlation with its d-band center owing to the long-range interactions induced by distinct local atomic geometries, resulting in an appropriate electrostatic potential and the highest catalytic activity on c-SACs with 7.0 Å Ru SAD. The present study promises an attractive methodology for experimentally quantifying the metal SAD to provide valuable insights into the catalytic mechanism of c-SACs.

N-Doped Carbon Shells Encapsulated Ru-Ni Nanoalloys for Efficient Hydrogen Evolution Reaction

The alkaline hydrogen evolution reaction (HER) is of great significance for the large-scale green H₂ production. Currently, pressing challenges in the fabrication of cost-effective HER electrocatalysts are related to their sluggish water dissociation kinetics. Herein, a facile strategy to accelerate the desorption of HER intermediates and water dissociation is proposed. RuNi nanoalloy confined within N-doped carbon shells (Ru₇ Ni₃ @NC/C) with optimized Ru/Ni ratio and the dicyandiamide dosage was prepared. It displays an overpotential (η₁₀ ) of 16 mV, Tafel slope of 29.9 mV dec^-1 , and long-term stability over 10 000 cycles. The decent HER performance on Ru₇ Ni₃ @NC/C stems from the core-shell structure that is favoring the exposure of dispersed active sites, and the synergistic effect to promote water capture and dissociation. This work provides insight into the relationship between the HER performance and the electrochemical behavior of the intermediate adsorbed state, and paves an avenue toward rational design efficient electrocatalysts for HER.

Ordered micropattern arrays fabricated by lung-derived dECM hydrogels for chemotherapeutic drug screening

AIMS

This study aims to evaluate ECM-coated micropattern arrays derived from decellularization of native porcine lungs as a novel three-dimensional cell culture platform.

METHODS

ECM derived from decellularization of native porcine lungs was exploited to prepare hydrogels. Then, dECM-coated micropattern arrays were fabricated at four different diameters (50, 100, 150 and 200 ​μm) using polydimethylsiloxane (PDMS). Two lung cancer cell lines, A549 and H1299, were tested on a dECM-coated micropattern array as a novel culture platform for cell adhesion, distribution, proliferation, viability, phenotype expression, and drug screening to evaluate the cytotoxicity of paclitaxel, doxorubicin and cisplatin.

RESULTS

The ECM derived from decellularization of native porcine lungs supported cell adhesion, distribution, viability and proliferation better than collagen I and Matrigel as the coated matrix on the surface. Moreover, the optimal diameter of the micropattern arrays was 100-150 ​μm, as determined by measuring the morphology, viability, proliferation and phenotype of the cancer cell spheroids. Cell spheroids of A549 and H1299 on dECM-coated micropattern arrays showed chemoresistance to anticancer drugs compared to that of the monolayer. The different distributions of HIF-1α, MCL-1 (in the center) and Ki-67 and MRP2 (in the periphery) of the spheroids demonstrated the good establishment of basal-lateral polarity and explained the chemoresistance phenomenon of spheroids.

CONCLUSIONS

This novel three-dimensional cell culture platform is stable and reliable for anticancer drug testing. Drug screening in dECM-coated micropattern arrays provides a powerful alternative to existing methods for drug testing and metabolic profiling in the drug discovery process.

In Situ Simultaneous Cavitation-Doping Approach for Constructing Bimetallic Metal-Organic Framework Hollow Nanospheres with Enhanced Electrocatalytic Hydrogen Production

This Communication demonstrates a novel and in situ simultaneous cavitation-doping (SCD) approach to construct bimetallic metal-doped cobalt metal-organic framework hollow nanospheres (CoM-MOF HNSs, with M = Ru or Fe). The key point of the SCD approach is the careful balance between the kinetics of Co-MOF being etched and the coordinative growth of a more stable CoM-MOF shell induced by Lewis acid (MCl₃, with M = Ru or Fe). Our work provides a new method to synthesize bimetallic hollow MOFs and benefits the development of electrocatalysts.

Mn-Dopant Differentiating the Ru and Ir Oxidation States in Catalytic Oxides Toward Durable Oxygen Evolution Reaction in Acidic Electrolyte

Designing an efficient and durable electrocatalyst for the sluggish oxygen evolution reaction (OER) at the anode remains the foremost challenge in developing proton exchange membrane (PEM) electrolyzers. Here, a highly active and durable cactus-like nanoparticle with an exposed heterointerface between the IrO₂ and the low oxidation state Ru by introducing a trace amount of Mn dopant is reported. The heterostructure fabrication relies on initial mixing of the Ru and Ir phases before electrochemical oxidation to produce a conjoined Ru/IrO₂ heterointerface. Benefitting from electron transfer at the heterointerface, the low oxidation state Ru species shows excellent initial activity, which is maintained even after 180 h of continuous OER test. In a half-cell test, the Mn-doped RuIr nanocactus (Mn-RuIr NCT) achieves a mass activity of 1.85 A mg_Ir+Ru ^-1 at 1.48 V_RHE , which is 139-fold higher than that of commercial IrO₂ . Moreover, the superior electrocatalytic performance of Mn-RuIr NCT in the PEM electrolysis system ensures its viability in practical uses. The results of the excellent catalytic performance for acidic OER indicate that the heterostructuring robust rutile IrO₂ and the highly active Ru species with a low oxidation state on the catalyst surface drive a synergistic effect.

Highly efficient sub-nanometer RuxCuyP2 nanoclusters designed for hydrogen evolution under alkaline media

Design of highly active and stable non-precious electrocatalysts towards hydrogen evolution reaction (HER) is a hot research topic in low cost, clean and sustainable hydrogen energy field, yet remaining the important challenge caused by the sluggish reaction kinetics for water-alkali electrolyzers. Herein, a robust electrocatalyst is proposed by designing a novel sub-nanometer of copper and ruthenium bimetallic phosphide nanoclusters (Ru_xCu_yP₂) supported on a graphited carbon nanofibers (CNF). Uniform Ru_xCu_yP₂ (~1.90 nm) on the surface of CNF are obtained by introducing the dispersed Ru, thereby improving the intrinsic activity for HER. On optimizing the Ru ratio, the (x = y = 1) RuCuP₂/CNF catalyst exhibits an excellent HER electroactivity with an overpotential of 10 mV in 1.0 M NaOH electrolyte to produce 10 mA cm^-2 current density, which is lower than commercial 20% Pt/C in alkaline solution. Moreover, the kinetic study demonstrated that electrochemical activation energies for HER of RuCuP₂/CNF is 20.7 kJ mol^-1 highest among different ratio bimetallic phosphide. This simple, cost-effective, and environmentally friendly methodology can pave the way for exploitation of bimetallic phosphide nanoclusters for catalyst design.

Strong Electron Coupling of Ru and Vacancy-Rich Carbon Dots for Synergistically Enhanced Hydrogen Evolution Reaction

The exploitation of ingenious strategies to improve the activity and stability of ruthenium (Ru) is crucial for the advancement of Ru-based electrocatalysts. Vacancy engineering is a typical strategy for modulating the catalytic activity of electrocatalysts. However, creating vacancies directly into pure metallic Ru is difficult because of the extremely stringent conditions required and will result in instability because the integrity of the crystal structure is destroyed. In response, a compromise tactic by introducing vacancies in a Ru composite structure is proposed, and vacancy-rich carbon dots coupled with Ru (Ru@CDs) are elaborately constructed. Specifically, the vacancy-rich carbon dots (CDs) serve as an excellent platform for anchoring and trapping Ru nanoparticles, thus restraining their agglomeration and growth. As expected, Ru@CDs exhibited excellent catalytic performance with a low overpotential of 30 mV at 10 mA cm^-2 in 1 m KOH, a small Tafel slope of 22 mV decade^-1 , and robust stability even after 10 000 cycles. The low overpotential is comparable to those of most previously reported Ru-based electrocatalysts. Additionally, spectroscopic characterizations and theoretical calculations demonstrate that the rich vacancies and the electron interactions between Ru and CDs synergistically lower the intermediate energy barrier and thereby maximize the activity of the Ru@CDs electrocatalyst.

Ultrafine Ru nanoclusters supported on N/S doped macroporous carbon spheres for efficient hydrogen evolution reaction

The construction of highly-active and stable electrocatalysts for the hydrogen evolution reaction (HER) is significant for efficient water splitting processes. Herein, we develop an efficient HER catalyst of ultrafine Ru nanoclusters supported on a N/S doped macroporous hollow carbon sphere (Ru/H-S,N-C). The N/S co-doping strategy not only facilitates the reduction of the Ru nanocluster sizes, but also regulates the electronic structure of metallic Ru, improving the HER activity of the metallic Ru catalyst. Due to the structural advantages of N/S-doped macroporous carbon spheres that provide a fast mass transfer process and the high intrinsic activity of Ru nanoclusters, the optimized Ru/H-S,N-C catalyst exhibits excellent HER performance in alkaline medium, with a low overpotential of 32 mV to reach 10 mA cm^-2, fast HER kinetics (a Tafel slope of 24 mV dec^-1) and excellent durability, superior to the performances of the Ru/H-N-C sample and commercial Pt/C catalyst. Our work offers some guidance on the design of efficient Ru-based electrocatalysts.

Recent progress in water-splitting electrocatalysis mediated by 2D noble metal materials

Two-dimensional (2D) nanostructures have enabled noble-metal-based nanomaterials to be promising electrocatalysts toward overall water splitting due to their inherent structural advantages, including a high specific surface active area, numerous low-coordinated atoms, and a high density of defects and edges. Moreover, it is also disclosed that the electronic effect and strain effect within 2D nanostructures also benefit the further promotion of the electrocatalytic performance. In this review, we have focused on the recent progress in the fabrication of advanced electrocatalysts based on 2D noble-metal-based nanomaterials toward water splitting electrocatalysis. First, fundamental descriptions about water-splitting mechanisms, some promising engineering strategies, and major challenges in electrochemical water splitting are given. Then, the structural merits of 2D nanostructures for water splitting electrocatalysis are also highlighted, including abundant surface active sites, lattice distortion, abundant surface defects, electronic effects, and strain effects. Additionally, some representative water-splitting electrocatalysts have been discussed in detail to highlight the superiorities of 2D noble-metal-based nanomaterials for electrochemical water splitting. Finally, the underlying challenges and future opportunities for the fabrication of more advanced electrocatalysts for water splitting are also highlighted. We hope that this review article provides guidance for the fabrication of more efficient electrocatalysts for boosting industrial hydrogen production via water splitting.

Heteroatom-Doping of Non-Noble Metal-Based Catalysts for Electrocatalytic Hydrogen Evolution: An Electronic Structure Tuning Strategy

Electrocatalytic water splitting for hydrogen production is an appealing way to reduce carbon emissions and generate renewable fuels. This promising process, however, is limited by its sluggish reaction kinetics and high-cost catalysts. Construction of low-cost and high-performance non-noble metal-based catalysts have been one of the most effective approaches to address these grand challenges. Notably, the electronic structure tuning strategy, which could subtly tailor the electronic states, band structures, and adsorption ability of the catalysts, has become a pivotal way to further enhance the electrochemical water splitting reactions based on non-noble metal-based catalysts. Particularly, heteroatom-doping plays an effective role in regulating the electronic structure and optimizing the intrinsic activity of the catalysts. Nevertheless, the reaction kinetics, and in particular, the functional mechanisms of the hetero-dopants in catalysts yet remains ambiguous. Herein, the recent progress is comprehensively reviewed in heteroatom doped non-noble metal-based electrocatalysts for hydrogen evolution reaction, particularly focus on the electronic tuning effect of hetero-dopants in the catalysts and the corresponding synthetic pathway, catalytic performance, and activity origin. This review also attempts to establish an intrinsic correlation between the localized electronic structures and the catalytic properties, so as to provide a good reference for developing advanced low-cost catalysts.

Dark-Field Imaging of Cation Exchange Synthesis of Cu2-xS@Au2S@Au Nanoplates toward the Plasmonic Enhanced Hydrogen Evolution Reaction

The development of novel electrocatalysts, especially Pt-free electrocatalysts, is of great significance for evolving hydrogen fuel cells. Two-dimensional materials have many advantages, such as large specific surface area, abundant active edges, and adjustable electronic structure, which provide broad prospects for studying high-performance electrocatalysts. In this paper, Cu_2-xS@Au₂S@Au nanoplates (NPs) were synthesized by cation exchange, which showed good catalytic performance toward the hydrogen evolution reaction (HER). Dark-field microscopy can help observe the process of cation exchange in real time to precisely control the synthesis of the composite materials. The synthesized Cu_2-xS@Au₂S@Au nanoplates (NPs) exhibited greatly enhanced plasmonic emission, resulting in accelerated chemical conversion and improved HER efficiency. Under 532 nm laser excitation, the overpotential of the HER shifted from 152 to 96 mV at a current density of -10 mA cm^-2. The plasmonic nanocatalysts show exciting prospects in the field of new energy resources.

IrCo nanocacti on CoxSy nanocages as a highly efficient and robust electrocatalyst for the oxygen evolution reaction in acidic media

Developing highly efficient Ir-based electrocatalysts for the oxygen evolution reaction (OER) has been an important agenda in spearheading the water splitting technology. In this study, the synthesis of IrCo nanocacti on CoxSy nanocages (ICS NCs) is demonstrated by utilizing CoO@CoxSy nanoparticles as reactive nanotemplates. In addition to the high catalytic activities with a low overpotential of 281 mV at 10 mA cm-2 and an outstanding mass activity of 1285 mA mgIr-1 at 1.53 V, the ICS NCs endure a prolonged OER test for over 100 h, greatly outperforming other previously reported Ir-based electrocatalysts. This work suggests that the unique hetero-nanostructure of IrCo/CoxSy induces in situ S doping during electrochemical oxidation and the beneficial effect of S doping on the enhanced stability of ICS NCs for the OER.

Open-mouth N-doped carbon nanoboxes embedded with mixed metal phosphide nanoparticles as high-efficiency catalysts for electrolytic water splitting

The key to develop efficient catalysts is to improve the quantity and activity of catalytic sites of the catalysts through optimal structural and compositional design. Accordingly, open-mouth N-doped carbon nanoboxes embedded with mixed metal phosphide nanoparticles are fabricated from monodisperse Ni3[Fe(CN)6]2·H2O nanocubes through conformal Ni3[Co(CN)6]2·12H2O layer coating, ammonia etching, and thermal phosphorization, sequentially. The product catalyst exhibits highly efficient electrocatalytic performances, achieving low overpotentials of 204 and 129 mV for the oxygen evolution reaction and hydrogen evolution reaction, respectively, and a small working voltage of 1.57 V for the overall water splitting, all at 10 mA cm-2. Its long-term electrocatalytic stability is also outstanding, experiencing only minor chronopotentiometric decay after a 24 h operation at 10 mA cm-2. The enhanced electrocatalytic performance may be attributed to the synergistic effects between the mixed metal phosphides, the protective function offered by the chainmail catalyst design, and the fast mass transport channels for the electrolyte and gaseous products afforded by the large openings on the nanobox shell, as well as the easy access of the inner active sites of the nanobox. The ingenious open-mouth nanobox structure together with embedded mixed metal phosphide nanoparticles is a unique design for improving the quantity and activity of catalytic sites of the catalyst for high efficiency electrolytic water splitting. The present design concept can be readily applied to the fabrication of other heterogeneous catalysts.

Synthesis of micro/nanoscaled metal–organic frameworks and their direct electrochemical applications

Developing strategies to control the morphology and size of MOFs is important for their applications in batteries, supercapacitors and electrocatalysis. This review focuses on the design and fabrication of MOFs at the micro/nanoscale.

Unusual synergistic effect in layered Ruddlesden-Popper oxide enables ultrafast hydrogen evolution

Efficient electrocatalysts for hydrogen evolution reaction are key to realize clean hydrogen production through water splitting. As an important family of functional materials, transition metal oxides are generally believed inactive towards hydrogen evolution reaction, although many of them show high activity for oxygen evolution reaction. Here we report the remarkable electrocatalytic activity for hydrogen evolution reaction of a layered metal oxide, Ruddlesden−Popper-type Sr₂RuO₄ with alternative perovskite layer and rock-salt SrO layer, in an alkaline solution, which is comparable to those of the best electrocatalysts ever reported. By theoretical calculations, such excellent activity is attributed mainly to an unusual synergistic effect in the layered structure, whereby the (001) SrO-terminated surface cleaved in rock-salt layer facilitates a barrier-free water dissociation while the active apical oxygen site in perovskite layer promotes favorable hydrogen adsorption and evolution. Moreover, the activity of such layered oxide can be further improved by electrochemistry-induced activation.

Water may serve as a renewable hydrogen fuel source to replace fossil fuels, although such electrolysis requires highly active catalysts. Here, authors explore Ruddlesden−Popper oxides as hydrogen evolution electrocatalysts that feature an unusual synergistic effect to promote high activity.

Recent advances in copper sulphide-based nanoheterostructures

This tutorial summarizes and integrates recent advances in design and synthesis of copper sulfide-based nanoheterostructures and their applications in energy and healthcare.

Hollow nanoparticles as emerging electrocatalysts for renewable energy conversion reactions

While the realization of clean and sustainable energy conversion systems primarily requires the development of highly efficient catalysts, one of the main issues had been designing the structure of the catalysts to fulfill minimum cost as well as maximum performance. Until now, noble metal-based nanocatalysts had shown outstanding performances toward the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER). However, the scarcity and high cost of them impeded their practical use. Recently, hollow nanostructures including nanocages and nanoframes had emerged as a burgeoning class of promising electrocatalysts. The hollow nanostructures could expose a high proportion of active surfaces while saving the amounts of expensive noble metals. In this review, we introduced recent advances in the synthetic methodologies for generating noble metal-based hollow nanostructures based on thermodynamic and kinetic approaches. We summarized electrocatalytic applications of hollow nanostructures toward the ORR, OER, and HER. We next provided strategies that could endow structural robustness to the flimsy structural nature of hollow structures. Finally, we concluded this review with perspectives to facilitate the development of hollow nanostructure-based catalysts for energy applications.

Janus Nanoparticle Structural Motif Control via Asymmetric Cation Exchange in Edge-Protected Cu1.81S@Ir xS y Hexagonal Nanoplates

Post-synthetic transformation of nanoparticles has received great attention, because this approach can provide an unusual route to elaborately composition-controlled nanostructures while maintaining the overall structure of the template. In principle, anisotropic heteronanoparticles of semiconductor materials can be synthesized via localized, that is, single site, cation exchange in symmetric nanoparticles. However, the differentiation of multiple identical cation exchange sites in symmetric nanoparticles can be difficult to achieve, especially for semiconductor systems with very fast cation exchange kinetics. We posited that single-site cation exchange in semiconductor nanoparticles might be realized by imposing a significant kinetic hurdle to the cation exchange reaction. The different atomic arrangements of the core and crown in core-crown structures might further differentiate the surface energies of originally identical cation exchange sites, leading to different reactivities of these sites. The first cation exchange site would be highly reactive due to the presence of a formed interface, thereby continuing to act as a site for cation exchange propagation. Herein, we present the proof-of-concept synthesis of Janus nanoparticles by using edge-protected Cu_1.81S@Ir _xS _y hexagonal nanoplates. The Janus nanoparticles comprising {Au₂S-Cu_1.81S}@Ir _xS _y or {PdS-Cu_1.81S}@Ir _xS _y exhibited dissimilar structural motifs due to the disparate cation exchange directions. This synthetic methodology exploiting cation exchange of surface-passivated semiconductor nanoparticles could fabricate the numerous symmetry-controlled Janus heterostructures.

Carbon-Quantum-Dots-Loaded Ruthenium Nanoparticles as an Efficient Electrocatalyst for Hydrogen Production in Alkaline Media

Highly active, stable, and cheap Pt-free catalysts for the hydrogen evolution reaction (HER) are facing increasing demand as a result of their potential use in future energy-conversion systems. However, the development of HER electrocatalysts with Pt-like or even superior activity, in particular ones that can function under alkaline conditions, remains a significant challenge. Here, the synthesis of a novel carbon-loaded ruthenium nanoparticle electrocatalyst (Ru@CQDs) for the HER, using carbon quantum dots (CQDs), is reported. Electrochemical tests reveal that, even under extremely alkaline conditions (1 m KOH), the as-formed Ru@CQDs exhibits excellent catalytic behavior with an onset overpotential of 0 mV, a Tafel slope of 47 mV decade^-1 , and good durability. Most importantly, it only requires an overpotential of 10 mV to achieve the current density of 10 mA cm^-2 . Such catalytic characteristics are superior to the current commercial Pt/C and most noble metals, non-noble metals, and nonmetallic catalysts under basic conditions. These findings open a new field for the application of CQDs and add to the growing family of metal@CQDs with high HER performance.

Synergism of Geometric Construction and Electronic Regulation: 3D Se-(NiCo)Sx /(OH)x Nanosheets for Highly Efficient Overall Water Splitting

The exploration of highly efficient electrocatalysts for both oxygen and hydrogen generation via water splitting is receiving considerable attention in recent decades. Up till now, Pt-based catalysts still exhibit the best hydrogen evolution reaction (HER) performance and Ir/Ru-based oxides are identified as the benchmark for oxygen evolution reaction (OER). However, the high cost and rarity of these materials extremely hinder their large-scale applications. This paper describes the construction of the ultrathin defect-enriched 3D Se-(NiCo)S_x /(OH)_x nanosheets for overall water splitting through a facile Se-induced hydrothermal treatment. Via Se-induced fabrication, highly efficient Se-(NiCo)S_x /(OH)_x nanosheets are successfully fabricated through morphology optimization, defect engineering, and electronic structure tailoring. The as-prepared hybrids exhibit relatively low overpotentials of 155 and 103 mV at the current density of 10 mA cm^-2 for OER and HER, respectively. Moreover, an overall water-splitting device delivers a current density of 10 mA cm^-2 for ≈66 h without obvious degradation.

Electrocatalysts for Hydrogen Evolution in Alkaline Electrolytes: Mechanisms, Challenges, and Prospective Solutions

Hydrogen evolution reaction (HER) in alkaline medium is currently a point of focus for sustainable development of hydrogen as an alternative clean fuel for various energy systems, but suffers from sluggish reaction kinetics due to additional water dissociation step. So, the state-of-the-art catalysts performing well in acidic media lose considerable catalytic performance in alkaline media. This review summarizes the recent developments to overcome the kinetics issues of alkaline HER, synthesis of materials with modified morphologies, and electronic structures to tune the active sites and their applications as efficient catalysts for HER. It first explains the fundamentals and electrochemistry of HER and then outlines the requirements for an efficient and stable catalyst in alkaline medium. The challenges with alkaline HER and limitation with the electrocatalysts along with prospective solutions are then highlighted. It further describes the synthesis methods of advanced nanostructures based on carbon, noble, and inexpensive metals and their heterogeneous structures. These heterogeneous structures provide some ideal systems for analyzing the role of structure and synergy on alkaline HER catalysis. At the end, it provides the concluding remarks and future perspectives that can be helpful for tuning the catalysts active-sites with improved electrochemical efficiencies in future.

Ferric phosphide carbon nanocomposites emerging as highly active electrocatalysts for the hydrogen evolution reaction

This Frontier article highlights the recent development and advances in designing ferric phosphide (FeP) based composite materials for the HER.

Facile synthesis of Pd@Ru nanoplates with controlled thickness as efficient catalysts for hydrogen evolution reaction

Pd@Ru nanoplates with controlled thickness were synthesized and exhibited substantially enhanced properties for the hydrogen evolution reaction relative to commercial catalysts.

Electronic Modulation of Electrocatalytically Active Center of Cu7S4 Nanodisks by Cobalt-Doping for Highly Efficient Oxygen Evolution Reaction

Cu-based electrocatalysts have seldom been studied for water oxidation because of their inferior activity and poor stability regardless of their low cost and environmentally benign nature. Therefore, exploring an efficient way to improve the activity of Cu-based electrocatalysts is very important for their practical application. Modifying electronic structure of the electrocatalytically active center of electrocatalysts by metal doping to favor the electron transfer between catalyst active sites and electrode is an important approach to optimize hydrogen and oxygen species adsorption energy, thus leading to the enhanced intrinsic electrocatalytic activity. Herein, Co-doped Cu₇S₄ nanodisks were synthesized and investigated as highly efficient electrocatalyst for oxygen evolution reaction (OER) due to the optimized electronic structure of the active center. Density-functional theory (DFT) calculations reveal that Co-engineered Cu₇S₄ could accelerate electron transfer between Co and Cu sites, thus decrease the energy barriers of intermediates and products during OER, which are crucial for enhanced catalytic properties. As expected, Co-engineered Cu₇S₄ nanodisks exhibit a low overpotential of 270 mV to achieve current density of 10 mA cm^-2 as well as decreased Tafel slope and enhanced turnover frequencies as compared to bare Cu₇S₄. This discovery not only provides low-cost and efficient Cu-based electrocatalyst by Co doping, but also exhibits an in-depth insight into the mechanism of the enhanced OER properties.