Amorphous Molybdenum Sulfide/Carbon Nanotubes Hybrid Nanospheres Prepared by Ultrasonic Spray Pyrolysis for Electrocatalytic Hydrogen Evolution

CNTs Bridged Basal-Plane-Active 2H-MoS2 Nanosheets for Efficient Robust Electrocatalysis

2D 2H-phase MoS2 is promising for electrocatalytic applications because of its stable phase, rich edge sites, and large surface area. However, the pristine low-conductive 2H-MoS2 suffers from limited electron transfer and surface activity, which become worse after their highly likely aggregation/stacking and self-curling during applications. In this work, these issues are overcome by conformally attaching the intercalation-detonation-exfoliated, surface S-vacancy-rich 2H-MoS2 onto robust conductive carbon nanotubes (CNTs), which electrically bridge bulk electrode and local MoS2 catalysts. The optimized MoS2 /CNTs nanojunctions exhibit outstanding stable electroactivity (close to commercial Pt/C): a polarization overpotential of 79 mV at the current density of 10 mA cm-2 and the Tafel slope of 33.5 mV dec-1 . Theoretical calculations unveil the metalized interfacial electronic structure of MoS2 /CNTs nanojunctions, enhancing defective-MoS2 surface activity and local conductivity. This work provides guidance on rational design for advanced multifaceted 2D catalysts combined with robust bridging conductors to accelerate energy technology development.

Enhanced Hydrogen Evolution Reaction over Co Nanoparticles Embedded N-Doped Carbon Nanotubes Electrocatalyst with Zn as an Accelerant

The rational design for transition metals-based carbon nano-materials as efficient electrocatalysts still remains a crucial challenge for economical electrochemical hydrogen production. Carbon nanotubes (CNTs) as attractive electrocatalysts are typically activated by non-metal dopant to promote catalytic performance. Metals doping or metal/non-metal co-doping of CNTs, however, are rarely explored. Herein, this work rationally designs bimetal oxide templates of ZnCo₂ O₄ for heterogeneously doping Zn and N into Co nanoparticles embedded carbon nanotubes (Co@Zn-N-CNTs). During the formation of CNTs, Zn atoms volatilize from ZnCo₂ O₄ and in situ dope into the carbon skeleton. In particular, owing to the low electronegativity of Zn, the electrons aptly transfer from Zn to carbon atoms, which generate a high electron density for the carbon layers and offer more preponderant catalytic sites for hydrogen reduction. The Co@Zn-N-CNTs catalyst exhibits enhanced hydrogen evolution reaction activity in 0.5 m H₂ SO₄ electrolyte, with a low onset potential of -20 mV versus RHE at 1 mA cm^-2 , an overpotential of 67 mV at 10 mA cm^-2 , a small Tafel slope of 52.1 mV dec^-1 , and persistent long-term stability. This study provides brand-new insights into the utilization of Zn as electronic regulator and activity promoter toward the design of high-efficiency electrocatalysts.

Femtosecond Laser-Ablated Copper Surface as a Substrate for a MoS2-Based Hydrogen Evolution Reaction Electrocatalyst

One of the methods to improve the performance of a heterogeneous electrocatalyst is the dispersion of a catalytic material on a suitable substrate. In this study, femtosecond laser ablation was used to prepare very rough but also ordered copper surfaces consisting of vertical, parallel ridges. Then, a molybdenum sulfide coating was electrochemically deposited onto these surfaces. It was observed by profilometry that the average roughness of the surface after coating with MoS₂ had decreased, but the developed surface area still remained significantly larger than the projected surface area. The electrodes were then used as an electrocatalyst for the hydrogen evolution reaction in acidic media. These were highly efficient, reaching 10 mA cm⁻² of HER current at a −181 mV overpotential and a Tafel slope of ~39 mV dec⁻¹. Additionally, scanning electrochemical microscopy was used to observe whether hydrogen evolution would preferentially occur in certain spots, for example, on the peaks, but the obtained results suggest that the entire surface is active. Finally, the electrochemical impedance spectroscopy data showed the difference in the double-layer capacitance between the ablated and non-ablated surfaces (up to five times larger) as well as the parameters that describe the improved catalytic activity of fs-Cu/MoS₂ electrodes.

Transition Metal Chalcogenides as a Versatile and Tunable Platform for Catalytic CO2 and N2 Electroreduction

Group VI transition metal chalcogenides are the subject of increasing research interest for various electrochemical applications such as low-temperature water electrolysis, batteries, and supercapacitors due to their high activity, chemical stability, and the strong correlation between structure and electrochemical properties. Particularly appealing is their utilization as electrocatalysts for the synthesis of energy vectors and value-added chemicals such as C-based chemicals from the CO₂ reduction reaction (CO₂R) or ammonia from the nitrogen fixation reaction (NRR). This review discusses the role of structural and electronic properties of transition metal chalcogenides in enhancing selectivity and activity toward these two key reduction reactions. First, we discuss the morphological and electronic structure of these compounds, outlining design strategies to control and fine-tune them. Then, we discuss the role of the active sites and the strategies developed to enhance the activity of transition metal chalcogenide-based catalysts in the framework of CO₂R and NRR against the parasitic hydrogen evolution reaction (HER); leveraging on the design rules applied for HER applications, we discuss their future perspective for the applications in CO₂R and NRR. For these two reactions, we comprehensively review recent progress in unveiling reaction mechanisms at different sites and the most effective strategies for fabricating catalysts that, by exploiting the structural and electronic peculiarities of transition metal chalcogenides, can outperform many metallic compounds. Transition metal chalcogenides outperform state-of-the-art catalysts for CO₂ to CO reduction in ionic liquids due to the favorable CO₂ adsorption on the metal edge sites, whereas the basal sites, due to their conformation, represent an appealing design space for reduction of CO₂ to complex carbon products. For the NRR instead, the resemblance of transition metal chalcogenides to the active centers of nitrogenase enzymes represents a powerful nature-mimicking approach for the design of catalysts with enhanced performance, although strategies to hinder the HER must be integrated in the catalytic architecture.

Self-Assembly Approach Towards MoS2 -Embedded Hierarchical Porous Carbons for Enhanced Electrocatalytic Hydrogen Evolution

Transition metal-based nanoparticle-embedded carbon materials have received increasing attention for constructing next-generation electrochemical catalysts for energy storage and conversion. However, designing hybrid carbon materials with controllable hierarchical micro/mesoporous structures, excellent dispersion of metal nanoparticles, and multiple heteroatom-doping remains challenging. Here, a novel pyridinium-containing ionic hypercrosslinked micellar frameworks (IHMFs) prepared from the core-shell unimicelle of s-poly(tert-butyl acrylate)-b-poly(4-bromomethyl) styrene (s-PtBA-b-PBMS) and linear poly(4-vinylpyridine) were used as self-sacrificial templates for confined growth of molybdenum disulfide (MoS₂ ) inside cationic IHMFs through electrostatic interaction. After pyrolysis, MoS₂ -anchored nitrogen-doped porous carbons possessing tunable hierarchical micro/mesoporous structures and favorable distributions of MoS₂ nanoparticles exhibited excellent electrocatalytic activity for hydrogen evolution reaction as well as small Tafel slope of 66.7 mV dec^-1 , low onset potential, and excellent cycling stability under acidic condition. Crucially, hierarchical micro/mesoporous structure and high surface area could boost their catalytic hydrogen evolution performance. This approach provides a novel route for preparation of micro/mesoporous hybrid carbon materials with confined transition metal nanoparticles for electrochemical energy conversion.

Non-Equilibrium Synthesis of Highly Active Nanostructured, Oxygen-Incorporated Amorphous Molybdenum Sulfide HER Electrocatalyst

Molybdenum sulfide emerged as promising hydrogen evolution reaction (HER) electrocatalyst thanks to its high intrinsic activity, however its limited active sites exposure and low conductivity hamper its performance. To address these drawbacks, the non-equilibrium nature of pulsed laser deposition (PLD) is exploited to synthesize self-supported hierarchical nanoarchitectures by gas phase nucleation and sequential attachment of defective molybdenum sulfide clusters. The physics of the process are studied by in situ diagnostics and correlated to the properties of the resulting electrocatalyst. The as-synthesized architectures have a disordered nanocrystalline structure, with nanodomains of bent, defective S-Mo-S layers embedded in an amorphous matrix, with excess sulfur and segregated molybdenum particles. Oxygen incorporation in this structure fosters the creation of amorphous oxide/oxysulfide nanophases with high electrical conductivity, enabling fast electron transfer to the active sites. The combined effect of the nanocrystalline pristine structure and the surface oxidation enhances the performance leading to small overpotentials, very fast kinetics (35.1 mV dec-1 Tafel slope) and remarkable long-term stability for continuous operation up to -1 A cm-2. This work shows possible new avenues in catalytic design arising from a non-equilibrium technique as PLD and the importance of structural and chemical control to improve the HER performance of MoS-based catalysts.

Structure of Nanocrystalline, Partially Disordered MoS2+δ Derived from HRTEM—An Abundant Material for Efficient HER Catalysis

Molybdenum sulfides (MoSx, x > 2) are promising catalysts for the hydrogen evolution reaction (HER) that show high hydrogen evolution rates and potentially represent an abundant alternative to platinum. However, a complete understanding of the structure of the most active variants is still lacking. Nanocrystalline MoS2+δ was prepared by a solvothermal method and immobilized on graphene. The obtained electrodes exhibit stable HER current densities of 3 mA cm−2 at an overpotential of ~200 mV for at least 7 h. A structural analysis of the material by high-resolution transmission electron microscopy (HRTEM) show partially disordered nanocrystals of a size between 5–10 nm. Both X-ray and electron diffraction reveal large fluctuations in lattice spacing, where the average c-axis stacking is increased and the in-plane lattice parameter is locally reduced in comparison to the layered structure of crystalline MoS2. A three-dimensional structural model of MoS2+δ could be derived from the experiments, in which [Mo2S12]2− and [Mo3S13]2− clusters as well as disclinations represent the typical defects in the ideal MoS2 structure. It is suggested that the partially disordered nanostructure leads to a high density of coordinatively modified Mo sites with lower Mo–Mo distances representing the active sites for HER catalysis, and, that these structural features are more important than the S:Mo ratio for the activity.

Plasmonic-induced overgrowth of amorphous molybdenum sulfide on nanoporous gold: An ambient synthesis method of hybrid nanoparticles with enhanced electrocatalytic activity

Hybrid materials of earth abundant transition metal dichalcogenides and noble metal nanoparticles, such as molybdenum sulfide (MoS_x) and gold nanoparticles, exhibit synergistic effects that can enhance electrocatalytic reactions. However, most current hybrid MoS_x-gold synthesis requires an energy intensive heat source of >500 °C or chemical plating to achieve deposition of MoS_x on the gold surface. Herein, we demonstrate the direct overgrowth of MoS_x over colloidal nanoporous gold (NPG), conducted feasibly under ambient conditions, to form hybrid particles with enhanced electrocatalytic performance toward hydrogen evolution reaction. Our strategy exploits the localized surface plasmon resonance-mediated photothermal heating of NPG to achieve >230 °C surface temperature, which induces the decomposition of the (NH₄)₂MoS₄ precursor and direct overgrowth of MoS_x over NPG. By tuning the concentration ratio between the precursor and NPG, the amount of MoS_x particles deposited can be systematically controlled from 0.5% to 2% of the Mo/(Au + Mo) ratio. Importantly, we find that the hybrid particles exhibit higher bridging and an apical S to terminal S atomic ratio than pure molybdenum sulfide, which gives rise to their enhanced electrocatalytic performance for hydrogen evolution reaction. We demonstrate that hybrid MoS_x-NPG exhibits >30 mV lower onset potential and a 1.7-fold lower Tafel slope as compared to pure MoS_x. Our methodology provides an energy- and cost-efficient synthesis pathway, which can be extended to the synthesis of various functional hybrid structures with unique properties for catalysis and sensing applications.

Advances in the synthesis and design of nanostructured materials by aerosol spray processes for efficient energy storage

The increasing demand for energy storage has motivated the search for highly efficient electrode materials for use in rechargeable batteries with enhanced energy density and longer cycle life. One of the most promising strategies for achieving improved battery performance is altering the architecture of nanostructured materials employed as electrode materials in the energy storage field. Among numerous synthetic methods suggested for the fabrication of nanostructured materials, aerosol spray techniques such as spray pyrolysis, spray drying, and flame spray pyrolysis are reliable, as they are facile, cost-effective, and continuous processes that enable the synthesis of nanostructured electrode materials with desired morphologies and compositions with controlled stoichiometry. The post-treatment of spray-processed powders enables the fabrication of oxide, sulfide, and selenide nanostructures hybridized with carbonaceous materials including amorphous carbon, reduced graphene oxide, carbon nanotubes, etc. In this article, recent progress in the synthesis of nanostructured electrode materials by spray processes and their general formation mechanisms are discussed in detail. A brief introduction to the working principles of each spray process is given first, and synthetic strategies for the design of electrode materials for lithium-ion, sodium-ion, lithium-sulfur, lithium-selenium, and lithium-oxygen batteries are discussed along with some examples. This analysis sheds light on the synthesis of nanostructured materials by spray processes and paves the way toward the design of other novel and advanced nanostructured materials for high performance electrodes in rechargeable batteries of the future.

N-Doped amorphous MoSx for the hydrogen evolution reaction

Herein, the functions of a N dopant in crystalline MoS₂ catalysts during the electrochemical hydrogen evolution reaction (HER) were reported via a combined experimental and first-principles approach. However, studies on the N doping of amorphous MoS_x, which is a more active catalyst, have not been reported to date. In this study, via a simple method, we fabricated N-doped amorphous MoS_x for the first time and studied the correlations between the N dopant and the HER performance. Via X-ray photoelectron spectroscopy and theoretical formation energy calculations, we have found that a N dopant in basal plane S^2- plays a very important role in the improvement of the HER performance and remains stable during this dynamic transformation process. A N dopant in basal plane S^2- can increase the number of active sites toward the HER and enhance the conductivity of the catalysts as well as a N dopant in c-MoS₂. In addition to this, the first-principles calculations further suggested that a N dopant in basal plane S^2- could improve the activity of unsaturated Mo^V active sites by bringing its hydrogen adsorption free energy closer to zero. As a result, N-doped amorphous MoS_x possesses an overpotential of 143 mV at 10 mA cm^-2 and a Tafel slope of 57 mV dec^-1, much better than those of a-MoS_x. These results provide useful insights for the future development of nonmetal-doped MoS_x catalysts in the HER.

Cobalt-Tannin-Framework-Derived Amorphous Co-P/Co-N-C on N, P Co-Doped Porous Carbon with Abundant Active Moieties for Efficient Oxygen Reactions and Water Splitting

It remains a tremendous challenge to develop a low-cost, earth-abundant, and efficient catalyst with multifunctional activities for the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR). Herein, a facile and scalable avenue was developed to prepare amorphous Co-P/Co-N-C supported on N, P co-doped porous carbon (Co-P/Co-N-C/NPC) with a large specific surface area (1462.9 m²  g^-1 ) and abundant reactive sites including Co-P, Co-N and NPC. The prepared electrocatalyst exhibits outstanding catalytic performance for HER (η=234 mV at 10 mA cm^-2 ), OER (η=374 mV at 10 mA cm^-2 ), and ORR (E_1/2 =0.89 V, vs. reversible hydrogen electrode). Benefiting from the excellent HER performance and outstanding OER activity, the Co-P/Co-N-C/NPC delivers a current density of 10 mA cm^-2 for overall water splitting at a cell voltage of 1.59 V, which is comparable with the IrO₂ -Pt/C couple electrode.

Amorphous Ni x Co y P-supported TiO2 nanotube arrays as an efficient hydrogen evolution reaction electrocatalyst in acidic solution

Bimetallic phosphides have been attracting increasing attention due to their synergistic effect for improving the hydrogen evolution reaction as compared to monometallic phosphides. In this work, NiCoP modified hybrid electrodes were fabricated by a one-step electrodeposition process with TiO₂ nanotube arrays (TNAs) as a carrier. X-ray diffraction, transmission electron microscopy, UV-vis diffuse reflection spectroscopy, X-ray photoelectron spectroscopy and scanning transmission electron microscopy/energy-dispersive X-ray spectroscopy were used to characterize the physiochemical properties of the samples. The electrochemical performance was investigated by cyclic voltammetry, linear sweep voltammetry, and electrochemical impedance spectroscopy. We show that after incorporating Co into Ni-P, the resulting Ni _x Co _y P/TNAs present enhanced electrocatalytic activity due to the improved electron transfer and increased electrochemically active surface area (ECSA). In 0.5 mol L^-1 H₂SO₄ electrolyte, the Ni _x Co _y P/TNAs (x = 3.84, y = 0.78) demonstrated an ECSA value of 52.1 mF cm^-2, which is 3.8 times that of Ni-P/TNAs (13.7 mF cm^-2). In a two-electrode system with a Pt sheet as the anode, the Ni _x Co _y P/TNAs presented a bath voltage of 1.92 V at 100 mA cm^-2, which is an improvment of 79% over that of 1.07 V at 10 mA cm^-2.

Advances in nanostructures fabricated via spray pyrolysis and their applications in energy storage and conversion

This review provides insight into various nanostructures designed by spray pyrolysis and their applications in energy storage and conversion.

Growth of MoS2 Nanotubes Templated by Halloysite Nanotubes for the Reduction of Friction in Oil

One-dimensional MoS2 nanotubes with the specific surface area of 89.34 m2/g and the average pore size of 2.52 nm were successfully synthesized by the thermolytical approach assisted by halloysite nanotubes. The tribological properties of MoS2 nanotubes with good dispersion in oil were tested with a four-ball wear tester. The tribological testing results indicated that the average friction coefficient and the average wear scar diameter of the 0.08 wt % MoS2-based oil at 25 °C decreased about 39.2 and 35.0%, respectively, compared to those of the 150 SN base oil, indicating that the as-prepared MoS2 nanotubes as a lubricating additive can enhance the tribological performances. Finally, the lubrication mechanism of MoS2 nanotubes was put forward.

PbTe quantum dots as electron transfer intermediates for the enhanced hydrogen evolution reaction of amorphous MoSx/TiO2 nanotube arrays

Amorphous molybdenum sulfides (a-MoSx) have been demonstrated as economic and efficient hydrogen evolution catalysts for water splitting. Further improvements of their hydrogen evolution reaction (HER) activities could be achieved by coupling them with appropriate electron transfer intermediates via interfacial engineering. In this study, a novel ternary composite electrode comprising PbTe quantum dots (QDs), a-MoSx and TiO2 nanotube arrays (TNAs) was successfully fabricated by a facile combination of successive ionic layer adsorption and reaction (SILAR) and electrodeposition routes. Investigation of the microstructures and electrocatalytic properties of the a-MoSx/PbTe QD/TNA hybrid material show that PbTe QDs can work as electron temporary storage and electron transfer intermediates between the electrocatalyst a-MoSx and electrode-based material TiO2 that significantly lower the impedance of electrode process, enhance the energy band bending at the interface between the electrolyte and electrode surface, and increase the electrochemically active surface area. The electron interphase crossing from a-MoSx to electrolyte and electron transport inside the electrode are greatly strengthened. The ternary PbTe@MoSx/TNA electrode demonstrates lowered onset potential and Tafel slope and superior electrocatalytic activity and cyclic stability towards HER.

Ultrasonic Preparation of Porous Silica-Dye Microspheres: Sensors for Quantification of Urinary Trimethylamine N-Oxide

Trimethylamine N-oxide (TMAO), the N-oxide metabolite of trimethylamine (TMA), is a key index in the determination of a wide variety of human cardiac or kidney diseases. A colorimetric sensor array comprising ultrasonically prepared silica-dye microspheres was developed for rapid, portable, and sensitive detection of urinary TMAO. To prepare the sensor array, 13 different organically modified silica (ormosil)-dye composites were synthesized from the hydrolysis/pyrolysis of ultrasonically sprayed organosiloxane precursors under optimized reaction conditions; the resulting products are uniformly sized nanoporous microspheres that are effective colorimetric sensors for various volatile analytes. The effective quantification of aqueous TMAO (which is not volatile) was based on sensing the volatile TMA produced from a simple catalytic reduction of TMAO in situ. RGB color-change patterns from digital images of the sensor array permit precise discrimination among a wide range of TMAO concentrations (10-750 μM) in simulated urine samples; both hierarchical cluster analysis and principal component analysis achieve >99% accuracy in data classification. The calculated limit of detection of urinary TMAO is ∼4 μM, which is substantially below the median level of healthy subjects (∼380 μM). The array of sensors could be simplified to only a couple of strongly responsive elements for the ease of field use, and the process could be developed as a point-of-care tool in combination with digital imaging for the early diagnosis of cardiovascular or kidney diseases from the measurement of fasting urinary level of TMAO.

Synergism of Geometric Construction and Electronic Regulation: 3D Se-(NiCo)Sx /(OH)x Nanosheets for Highly Efficient Overall Water Splitting

The exploration of highly efficient electrocatalysts for both oxygen and hydrogen generation via water splitting is receiving considerable attention in recent decades. Up till now, Pt-based catalysts still exhibit the best hydrogen evolution reaction (HER) performance and Ir/Ru-based oxides are identified as the benchmark for oxygen evolution reaction (OER). However, the high cost and rarity of these materials extremely hinder their large-scale applications. This paper describes the construction of the ultrathin defect-enriched 3D Se-(NiCo)S_x /(OH)_x nanosheets for overall water splitting through a facile Se-induced hydrothermal treatment. Via Se-induced fabrication, highly efficient Se-(NiCo)S_x /(OH)_x nanosheets are successfully fabricated through morphology optimization, defect engineering, and electronic structure tailoring. The as-prepared hybrids exhibit relatively low overpotentials of 155 and 103 mV at the current density of 10 mA cm^-2 for OER and HER, respectively. Moreover, an overall water-splitting device delivers a current density of 10 mA cm^-2 for ≈66 h without obvious degradation.

3D Mesoporous van der Waals Heterostructures for Trifunctional Energy Electrocatalysis

The emergence of van der Waals (vdW) heterostructures of 2D materials has opened new avenues for fundamental scientific research and technological applications. However, the current concepts and strategies of material engineering lack feasibilities to comprehensively regulate the as-obtained extrinsic physicochemical characters together with intrinsic properties and activities for optimal performances. A 3D mesoporous vdW heterostructure of graphene and nitrogen-doped MoS₂ via a two-step sequential chemical vapor deposition method is constructed. Such strategy is demonstrated to offer an all-round engineering of 2D materials including the morphology, edge, defect, interface, and electronic structure, thereby leading to robustly modified properties and greatly enhanced electrochemical activities. The hydrogen evolution is substantially accelerated on MoS₂ , while the oxygen reduction and evolution are significantly improved on graphene. This work provides a powerful overall engineering strategy of 2D materials for electrocatalysis, which is also enlightening for other nanomaterials and energy-related applications.

Morphology-controlled synthesis of TiO2/MoS2 nanocomposites with enhanced visible-light photocatalytic activity

Hollow and yolk–shell heterostructures of TiO₂/MoS₂ nanocomposites are synthesized via a polymer assisted targeted-etching method and show high photocatalytic activity under sunlight.