Flexible Gold Nanocone Array Surfaces as a Tool for Regulating Neuronal Behavior

Nanoscale surface coatings and topographies for neural interfaces

With the lack of minimally invasive tools for probing neuronal systems across spatiotemporal scales, understanding the working mechanism of the nervous system and limited assessments available are imperative to prevent or treat neurological disorders. In particular, nanoengineered neural interfaces can provide a solution to this technological barrier. This review covers recent surface engineering approaches, including nanoscale surface coatings, and a range of topographies from the microscale to the nanoscale, primarily focusing on neural-interfaced biosystems. Specifically, the immobilization of bioactive molecules to fertilize the neural cell lineage, topographical engineering to induce mechanotransduction in neural cells, and enhanced cell-chip coupling using three-dimensional structured surfaces are highlighted. Advances in neural interface design will help us understand the nervous system, thereby achieving the effective treatments for neurological disorders. STATEMENT OF SIGNIFICANCE: • This review focuses on designing bioactive neural interface with a nanoscale chemical modification and topographical engineering at multiscale perspective. • Versatile nanoscale surface coatings and topographies for neural interface are summarized. • Recent advances in bioactive materials applicable for neural cell culture, electrophysiological sensing, and neural implants are reviewed.

Facile Fabrication of Titanium Nitride Nanoring Broad-Band Absorbers in the Visible to Near-Infrared by Shadow Sphere Lithography

Plasmonic broad-band absorbers have received much attention because of their high absorption and potential applications for light-absorbing devices such as thermophotovoltaics, solar energy harvesting, and thermal emitters. However, the fabrication of complex structures in a large area and thermostability remains a great challenge. Here, we report a titanium nitride nanoring broad-band absorber that has over 95% average absorption in the visible and near-infrared regions (400-900 nm). Nanoring structures in a large area (inch²) are fabricated by shadow sphere lithography, which can innovatively increase fabrication efficiency. The nanoring absorber showed over 2.3 times higher-temperature increases than flat film under the irradiation of light. These large-scale and broad-band absorbers have potential applications for solar energy conversion devices such as thermophotovoltaics and photothermal devices.

Facile fabrication of ordered discontinuous nanotopography on photosensitive substrates for enhanced neuronal differentiation

Controlling the development and morphology of neurons is important for basic neuroscience research as well as for applications in nerve regeneration and neural interfaces. Various studies have shown that nanoscale topographies can promote the development of neuronal cells and the differentiation of neural stem cells; however, the fabrication of these nanotopographical features often involves expensive and sophisticated techniques. Here, we employ nanosphere lens lithography combined with UV-LED technology to create nanopatterns on an SU-8 photoresist. We develop a facile method to create a reusable polystyrene nanosphere (PS-NS) lens array by the spontaneous formation of a hexagonal close-packed array of PS-NSs at a water-air interface and its subsequent transfer to a polydimethylsiloxane carrier film without using any special equipment. We show that this simple technique can create ordered arrays of nanodots on an SU-8 film, the dimensions of which can be controlled by the size of the PS-NSs. When used as a substrate for the neuronal differentiation of pheochromocytoma (PC12) cells, the nanopatterned SU-8 films exhibit enhanced differentiation parameters with respect to conventional tissue culture plastic as compared with their flat counterparts. The method proposed here can greatly facilitate the nanopatterning of various photosensitive substrates for the development of implants for nerve regeneration and neural interfacing.

Precise tailoring of evaporated gold nanocones using electron beam lithography and lift-off

The ability to fabricate nanocones with precise dimensions is essential for several emerging applications. We demonstrate here a method which can be used to fabricate arrays of gold nanocones with high dimensional precision using lithographic and lift-off means. electron beam (ebeam) writing of a spin-coated PMMA-based bilayer resist deposited onto silicon wafers is used to form a shadow mask. This mask gradually closes as the deposition of gold (using ebeam evaporation) proceeds-the result is arrays of gold nanocones on the silicon wafer surface after lift-off of the resist. Observations using scanning electron microscopy enable a statistical study of the dimensions of 360 gold nanocones-the results demonstrate the high precision of the nanocones dimensions. The fabrication process enables the creation of arrays of nanocones with a base diameter varying from 53.6 ± 2.1 nm to 94.1 ± 2.4 nm, a vertical height ranging from 71.3 ± 4.1 nm to 153.4 ± 3.4 nm, and an apex radius of curvature ranging from 8.4 ± 1.2 nm to 11.6 ± 1.5 nm. The results are compared with the predictions of a deposition model which considers the evolving shadow masking during the gold deposition to compute the nanocone profile.

High-Aspect-Ratio Nanostructured Surfaces as Biological Metamaterials

Materials patterned with high-aspect-ratio nanostructures have features on similar length scales to cellular components. These surfaces are an extreme topography on the cellular level and have become useful tools for perturbing and sensing the cellular environment. Motivation comes from the ability of high-aspect-ratio nanostructures to deliver cargoes into cells and tissues, access the intracellular environment, and control cell behavior. These structures directly perturb cells' ability to sense and respond to external forces, influencing cell fate, and enabling new mechanistic studies. Through careful design of their nanoscale structure, these systems act as biological metamaterials, eliciting unusual biological responses. While predominantly used to interface eukaryotic cells, there is growing interest in nonanimal and prokaryotic cell interfacing. Both experimental and theoretical studies have attempted to develop a mechanistic understanding for the observed behaviors, predominantly focusing on the cell-nanostructure interface. This review considers how high-aspect-ratio nanostructured surfaces are used to both stimulate and sense biological systems.

Diphenylalanine Peptide Nanowires as a Substrate for Neural Cultures

Primary brain cells cultured on flat surfaces, i.e., in a two-dimensional fashion, have a long history of use as an experimental model system in neuroscience research. However, it is questionable to which extent these cultured brain cells resemble their in vivo counterparts. Mainly, it has been claimed that the non-oxidative glucose metabolism reflected by lactate production is unphysiologically high. Furthermore, it is known that culturing in 2D alters the phenotype of cells. Here we present diphenylalanine peptide nanowires (PNWs) as a culturing substrate for primary neocortical neurons from mice. The topology of the PNWs leads to neuronal cultures developing in 2.5D environment and hence improved culturing conditions. We investigate the effect of different concentrations of PNWs and different cell densities of neurons on the culturing conditions. The neocortical neurons were examined through scanning electron microscopy in order to study the effect of PNW concentrations and neuron densities on the structural appearance of the cells. Then employing the optimal combination of neuron density and PNW concentration, the neurons were evaluated functionally and metabolically by comparison with neocortical neurons standard culturing methods in 2D. Specifically, we tested neuronal viability, capacity for vesicular release of neurotransmitter GABA, as well as oxidative and non-oxidative glucose metabolism. It was evident that neurons cultured on PNWs exhibited increased viability combined with an increased capacity for neurotransmitter release and a lower fraction of non-oxidative metabolism than neurons cultured in 2D. Hence, neocortical neurons cultured in 2.5D on PNWs appear to be healthier and less glycolytic than neurons cultured in 2D.

Biodelivery of nerve growth factor and gold nanoparticles encapsulated in chitosan nanoparticles for schwann-like cells differentiation of human adipose-derived stem cells

The constant release of neurotrophic factors through a nanomaterial-based delivery system can be an important strategy in medical and pharmaceutical fields for nerve tissue engineering. The present study was aimed at encapsulating NGF and AuNPs in chitosan nanoparticles (NGF-CNPs and AuNPs-CSNPs) and its evaluation on the differentiation potential of human adipose-derived stem cells (h-ADSCs) to Schwann-like cells. The NGF-CNPs were prepared by ionotropic gelation method with tripolyphosphate (TPP) as a crosslinker. After synthesis and characterization of nanoparticles, NGF encapsulation efficiency and release profile were observed by Bradford assay. Next, the effects of NGF-CSNPs and AuNPs-CSNPs on h-ADSCs survival were assessed through MTT assay. Also, the efficacy of Schwann-like cells differentiation was assessed by immunocytochemistry and real-time RT-PCR for S100β and MBP markers. NGF encapsulation efficiency was found about 85% and controlled and sustained release of NGF was observed during 7 days in vitro (74.63 ± 2.07%). The findings revealed that these nanoparticles are cytocompatible. The immunocytochemical analysis indicated that NGF-CSNPs and AuNPs-CSNPs could significantly increase the differentiated rate and myelinogenic potential of Schwann-like cells (p < 0.05). Besides, the expression level of GFAP, S100β, and MBP demonstrated significant upregulation in NGF-CSNPs and AuNPs-CSNPs groups compared to the control group (p < 0.05). Hence, it can be proposed that NGF-CNPs and AuNPs-CSNPs are capable of controlled release with improving the ability of h-ADSCs differentiation to Schwann-like cells. Also, the results show the potential future application of this differentiation in nerve tissue regeneration.

Cell Membrane Disruption by Vertical Micro-/Nanopillars: Role of Membrane Bending and Traction Forces

Gaining access to the cell interior is fundamental for many applications, such as electrical recording and drug and biomolecular delivery. A very promising technique consists of culturing cells on micro-/nanopillars. The tight adhesion and high local deformation of cells in contact with nanostructures can promote the permeabilization of lipids at the plasma membrane, providing access to the internal compartment. However, there is still much experimental controversy regarding when and how the intracellular environment is targeted and the role of the geometry and interactions with surfaces. Consequently, we investigated, by coarse-grained molecular dynamics simulations of the cell membrane, the mechanical properties of the lipid bilayer under high strain and bending conditions. We found out that a high curvature of the lipid bilayer dramatically lowers the traction force necessary to achieve membrane rupture. Afterward, we experimentally studied the permeabilization rate of the cell membrane by pillars with comparable aspect ratios but different sharpness values at the edges. The experimental data support the simulation results: even pillars with diameters in the micron range may cause local membrane disruption when their edges are sufficiently sharp. Therefore, the permeabilization likelihood is connected to the local geometric features of the pillars rather than diameter or aspect ratio. The present study can also provide significant contributions to the design of three-dimensional biointerfaces for tissue engineering and cellular growth.

Challenges and research progress of the use of mesenchymal stem cells in the treatment of ischemic stroke

Cerebral Ischemic Stroke (CIS) has become a hot issue in medical research because of the diversity of risk factors and the uncertainty of prognosis. In the field of regenerative medicine, mesenchymal stem cells (MSCs) have an increasingly prominent position due to their advantages of multiple differentiation, low immunogenicity and wide application. In the basic and clinical research of CIS, there are still some problems to be solved in the treatment of CIS. This paper will discuss the progresses and some obstacles of current MSCs for the treatment of CIS.

Interfacing Cells with Vertical Nanoscale Devices: Applications and Characterization

Measurements of the intracellular state of mammalian cells often require probes or molecules to breach the tightly regulated cell membrane. Mammalian cells have been shown to grow well on vertical nanoscale structures in vitro, going out of their way to reach and tightly wrap the structures. A great deal of research has taken advantage of this interaction to bring probes close to the interface or deliver molecules with increased efficiency or ease. In turn, techniques have been developed to characterize this interface. Here, we endeavor to survey this research with an emphasis on the interface as driven by cellular mechanisms.

Impact of nanoparticles on neuron biology: current research trends

Nanoparticles have enormous applications in textiles, cosmetics, electronics, and pharmaceuticals. But due to their exceptional physical and chemical properties, particularly antimicrobial, anticancer, antibacterial, anti-inflammatory properties, nanoparticles have many potential applications in diagnosis as well as in the treatment of various diseases. Over the past few years, nanoparticles have been extensively used to investigate their response on the neuronal cells. These nanoparticles cause stem cells to differentiate into neuronal cells and promote neuronal cell survivability and neuronal cell growth and expansion. The nanoparticles have been tested both in in vitro and in vivo models. The nanoparticles with various shapes, sizes, and chemical compositions mostly produced stimulatory effects on neuronal cells, but there are few that can cause inhibitory effects on the neuronal cells. In this review, we discuss stimulatory and inhibitory effects of various nanoparticles on the neuronal cells. The aim of this review was to summarize different effects of nanoparticles on the neuronal cells and try to understand the differential response of various nanoparticles. This review provides a bird's eye view approach on the effects of various nanoparticles on neuronal differentiation, neuronal survivability, neuronal growth, neuronal cell adhesion, and functional and behavioral recovery. Finally, this review helps the researchers to understand the different roles of nanoparticles (stimulatory and inhibitory) in neuronal cells to develop effective therapeutic and diagnostic strategies for neurodegenerative diseases.

Asymmetric, nano-textured surfaces influence neuron viability and polarity

Three dimensional, nanostructured surfaces have attracted considerable attention in biomedical research since they have proven to represent a powerful platform to influence cell fate. In particular, nanorods and nanopillars possess great potential for the control of cell adhesion and differentiation, gene and biomolecule delivery, optical and electrical stimulation and recording, as well as cell patterning. Here, we investigate the influence of asymmetric poly(dichloro-p-xylene) (PPX) columnar films on the adhesion and maturation of cortical neurons. We show that nanostructured films with dense, inclined polymer columns can support viable primary neuronal culture. The cell-nanostructure interface is characterized showing a minimal cell penetration but strong adhesion on the surface. Moreover, we quantify the influence of the nano-textured surface on the neural development (soma size, neuritogenesis, and polarity) in comparison to a planar PPX sample. We demonstrate that the nanostructures facilitates an enhancement in neurite branching as well as elongation of axons and growth cones. Furthermore, we show for the first time that the asymmetric orientation of polymeric nanocolumns strongly influences the initiation direction of the axon formation. These results evidence that 3D nano-topographies can significantly change neural development and can be used to engineer axon elongation. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 1634-1645, 2018.

Nanopatterned Scaffolds for Neural Tissue Engineering and Regenerative Medicine

Biologically inspired approaches employing nanoengineering techniques have been influential in the progress of neural tissue repair and regeneration. Neural tissues are exposed to complex nanoscale environments such as nanofibrils. In this chapter, we summarize representative nanotechniques, such as electrospinning, lithography, and 3D bioprinting, and their use in the design and fabrication of nanopatterned scaffolds for neural tissue engineering and regenerative medicine. Nanotopographical cues in combination with other cues (e.g., chemical cues) are crucial to neural tissue repair and regeneration using cells, including various types of stem cells. Production of biologically inspired nanopatterned scaffolds may encourage the next revolution for studies aiming to advance neural tissue engineering and regenerative medicine.

Facile, non-destructive characterization of 2d photonic crystals using UV-vis-spectroscopy

The quality of particle monolayers and size evolution of their particles during dry etching can be monitored by radiative losses of photonic modes into dielectric substrates.