Transition-Metal-Based Electrocatalysts as Cocatalysts for Photoelectrochemical Water Splitting: A Mini Review

Metal-insulator-semiconductor photoelectrodes for enhanced photoelectrochemical water splitting

Photoelectrochemical (PEC) water splitting provides a scalable and integrated platform to harness renewable solar energy for green hydrogen production. The practical implementation of PEC systems hinges on addressing three critical challenges: enhancing energy conversion efficiency, ensuring long-term stability, and achieving economic viability. Metal-insulator-semiconductor (MIS) heterojunction photoelectrodes have gained significant attention over the last decade for their ability to efficiently segregate photogenerated carriers and mitigate corrosion-induced semiconductor degradation. This review discusses the structural composition and interfacial intricacies of MIS photoelectrodes tailored for PEC water splitting. The application of MIS heterostructures across various semiconductor light-absorbing layers, including traditional photovoltaic-grade semiconductors, metal oxides, and emerging materials, is presented first. Subsequently, this review elucidates the reaction mechanisms and respective merits of vacuum and non-vacuum deposition techniques in the fabrication of the insulator layers. In the context of the metal layers, this review extends beyond the conventional scope, not only by introducing metal-based cocatalysts, but also by exploring the latest advancements in molecular and single-atom catalysts integrated within MIS photoelectrodes. Furthermore, a systematic summary of carrier transfer mechanisms and interface design principles of MIS photoelectrodes is presented, which are pivotal for optimizing energy band alignment and enhancing solar-to-chemical conversion efficiency within the PEC system. Finally, this review explores innovative derivative configurations of MIS photoelectrodes, including back-illuminated MIS photoelectrodes, inverted MIS photoelectrodes, tandem MIS photoelectrodes, and monolithically integrated wireless MIS photoelectrodes. These novel architectures address the limitations of traditional MIS structures by effectively coupling different functional modules, minimizing optical and ohmic losses, and mitigating recombination losses.

A Review of the Recent Advances in Composite Membranes for Hydrogen Generation Technologies

Keeping global warming at 2 degrees and below as stated in the "Paris Climate Agreement" and minimizing emissions can only be achieved by establishing a hydrogen (H2) ecosystem. Therefore, H2 technologies stand out in terms of accomplishing zero net emissions. Although H2 is the most abundant element in the known universe, molecular H2 is very rare in nature and must be produced. In H2 production, reforming natural gas and renewable hydrogen processes using electrolyzers comes to the fore. The key to all these technologies is to enhance production speed, performance, and system lifetime. At this point, composite membranes used in both processes come to the fore. This review article summarizes composite membrane technologies used in methane, ethanol, and biomass steam reforming processes, proton exchange membranes, alkaline water electrolysis, and hybrid sulfur cycle. In addition to these common H2 production technologies at large quantities, the innovative systems developed with solar energy integration for H2 generation were linked to composite membrane utilization. This study aimed to draw attention to the importance of composite membranes in H2 production. It aims to prepare a guiding summary for those working on membranes by combining the latest and cutting-edge studies on this subject.

Enhanced solar-driven photoelectrochemical water splitting using nanoflower Au/CuO/GaN hybrid photoanodes

Harnessing solar energy for large-scale hydrogen fuel (H2) production shows promise in addressing the energy crisis and ecological degradation. This study focuses on the development of GaN-based photoelectrodes for efficient photoelectrochemical (PEC) water splitting, enabling environmentally friendly H2 production. Herein, a novel nanoflower Au/CuO/GaN hybrid structure was successfully synthesized using a combination of methods including successive ionic layer adsorption and reaction (SILAR), RF/DC sputtering, and metal-organic chemical vapour deposition (MOCVD) techniques. Structural, morphological, and optical characteristics and elemental composition of the prepared samples were analyzed using X-ray diffraction (XRD), scanning electron microscopy (SEM), UV-Vis spectroscopy, and energy-dispersive X-ray (EDX) spectroscopy, respectively. PEC and electrochemical impedance measurements were performed for all samples. The nanoflower Au/CuO/GaN hybrid structure exhibited the highest photocurrent density of ∼4 mA cm-2 at 1.5 V vs. RHE in a Na2SO4 electrolyte with recorded moles of H2 of about 3246 μmol h-1 cm-2. By combining these three materials in a unique structure, we achieved improved performance in the conversion of solar energy into chemical energy. The nanoflower structure provides a large surface area and promotes light absorption while the Au, CuO, and GaN components contribute to efficient charge separation and transfer. This study presents a promising strategy for advancing sustainable H2 production via efficient solar-driven water splitting.

Unveiling the Influence of Sulfur Doping on Photoelectrochemical Performance in BiVO4/FeOOH Heterostructures

BiVO4 is a promising photoanode for photoelectrochemical (PEC) water splitting but suffers from high charge carrier recombination and sluggish surface water oxidation kinetics that limit its efficiency. In this work, a model of sulfur-incorporated FeOOH cocatalyst-loaded BiVO4 was constructed. The composite photoanode (BiVO4/S-FeOOH) demonstrates an enhanced photocurrent density of 3.58 mA cm-2, which is 3.7 times higher than that of the pristine BiVO4 photoanode. However, the current explanations for the generation of enhanced photocurrent signals through the incorporation of elements and cocatalyst loading remain unclear and require further in-depth research. In this work, the hole transfer kinetics were investigated by using a scanning photoelectrochemical microscope (SPECM). The results suggest that the incorporation of sulfur can effectively improve the charge transfer capacity of FeOOH. Moreover, the oxygen evolution reaction model provides evidence that S-doping can induce a "fast" surface catalytic reaction at the cocatalyst/solution interface. The work not only presents a promising approach for designing a highly efficient photoanode but also offers valuable insights into the role of element doping in the PEC water-splitting system.

n-Si/SiOx /CoOx -Mo Photoanode for Efficient Photoelectrochemical Water Oxidation

Green hydrogen is considered to be the key for solving the emerging energy and environmental issues. The photoelectrochemical (PEC) process for the production of green hydrogen has been widely investigated because solar power is clean and renewable. However, mass production in this way is still far away from reality. Here, a Si photoanode is reported with CoOx as co-catalyst for efficient water oxidation. It is found that a high photovoltage of 350 mV can be achieved in 1.0 m K3 BO3 . Importantly, the photovoltage can be further increased to 650 mV and the fill factor of 0.62 is obtained in 1.0 m K3 BO3 by incorporating Mo into CoOx . The Mo-incorporated photoanode is also highly stable. It is shown that the incorporation of Mo can reduce the particle size of co-catalyst on the Si surface, improve the particle-distribution uniformity, and increase the density of particles, which can effectively enhance the light absorption and the electrochemical active surface area. Importantly, the Mo-incorporation results in high energy barrier in the heterojunction. All of these factors are attributed to improved the PEC performance. These findings may provide new strategies to maximize the solar-to-fuel efficiency by tuning the co-catalysts on the Si surface.

Cocatalysts-Photoanode Interface in Photoelectrochemical Water Splitting: Understanding and Insights

Sluggish oxygen evolution reactions on photoanode surfaces severely limit the application of photoelectrochemical (PEC) water splitting. The loading of cocatalysts on photoanodes has been recognized as the simplest and most efficient optimization scheme, which can reduce the surface barrier, provide more active sites, and accelerate the surface catalytic reaction kinetics. Nevertheless, the introduction of cocatalysts inevitably generates interfaces between photoanodes and oxygen evolution cocatalysts (Ph/OEC), which causes severe interfacial recombination and hinders the carrier transfer. Recently, many researchers have focused on cocatalyst engineering, while few have investigated the effect of the Ph/OEC interface. Hence, to maximize the advantages of cocatalysts, interfacial problems for designing efficient cocatalysts are systematically introduced. In this review, the interrelationship between the Ph/OEC and PEC performance is classified and some methods for characterizing Ph/OEC interfaces are investigated. Additionally, common interfacial optimization strategies are summarized. This review details cocatalyst-design-based interfacial problems, provides ideas for designing efficient cocatalysts, and offers references for solving interfacial problems.

Enhanced photoelectrochemical performance of NiS-modified TiO2 nanorods with a surface charge accumulation facet

Photoelectrochemical (PEC) water splitting for hydrogen production technology is considered as one of the most promising solutions to energy shortage and environmental remediation. TiO2/NiS nanorod arrays were successfully prepared using hydrothermal deposition followed by the successive ionic layer adsorption and reaction (SILAR) method. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and photoluminescence (PL) spectra characterization studies indicate the successful deposition of NiS on TiO2 NRs. The NiS deposition on TiO2 was optimized by controlling the impregnation cycle. The optimal sample exhibits a photocurrent density of 1.16 mA cm-2 at 0.6 V vs. Ag/AgCl, which is a 1.9-fold enhancement over that of pristine TiO2 nanorod arrays. The enhanced photoelectrochemical performance can be attributed to two aspects. On the one hand, the (101) crystal plane of rutile TiO2 is the facet where photogenerated holes accumulate and is an efficient active plane for the oxygen evolution reaction; on the other hand, NiS is a narrow band gap semiconductor, and its deposition on TiO2 nanorods can further promote the separation and transport of photogenerated charge carriers.

Perovskite-Solar-Cell-Powered Integrated Fuel Conversion and Energy-Storage Devices

Metal halide hybrid perovskite solar cells (PSCs) have received considerable attention over the past decade owing to their potential for low-cost, solution-processable, earth-abundant, and high-performance superiority, increasing power conversion efficiencies of up to 25.7%. Solar energy conversion into electricity is highly efficient and sustainable, but direct utilization, storage, and poor energy diversity are difficult to achieve, resulting in a potential waste of resources. Considering its convenience and feasibility, converting solar energy into chemical fuels is regarded as a promising pathway for boosting energy diversity and expanding its utilization. In addition, the energy conversion-storage integrated system can efficiently sequentially capture, convert, and store energy in electrochemical energy storage devices. However, a comprehensive overview focusing on PSC-self-driven integrated devices with a discussion of their development and limitations remains lacking. Here, focus is on the development of representative configurations of emerging PSC-based photo-electrochemical devices including self-charging power packs, unassisted solar water splitting/CO2 reduction. The advanced progresses in this field, including configuration design, key parameters, working principles, integration strategies, electrode materials, and their performance evaluations are also summarized. Finally, scientific challenges and future perspectives for ongoing research in this field are presented.

In-Situ-Grown Cu Dendrites Plasmonically Enhance Electrocatalytic Hydrogen Evolution on Facet-Engineered Cu2 O

Herein, facet-engineered Cu2 O nanostructures are synthesized by wet chemical methods for electrocatalytic HER, and it is found that the octahedral Cu2 O nanostructures with exposed crystal planes of (111) (O-Cu2 O) has the best hydrogen evolution performance. Operando Raman spectroscopy and ex-situ characterization techniques showed that Cu2 O is reduced during HER, in which Cu dendrites are grown on the surface of the Cu2 O nanostructures, resulting in the better HER performance of O-Cu2 O after HER (O-Cu2 O-A) compared with that of the as-prepared O-Cu2 O. Under illumination, the onset potential of O-Cu2 O-A is ca. 52 mV positive than that of O-Cu2 O, which is induced by the plasmon-activated electrochemical system consisting of Cu2 O and the in-situ generated Cu dendrites. Incident photon-to-current efficiency (IPCE) measurements and the simulated UV-Vis spectrum demonstrate the hot electron injection (HEI) from Cu dendrites to Cu2 O. Ab initio nonadiabatic molecular dynamics (NAMD) simulations revealed the transfer of photogenerated electrons (27 fs) from Cu dendrites to Cu2 O nanostructures is faster than electron relaxation (170 fs), enhancing its surface plasmons activity, and the HEI of Cu dendrites increases the charge density of Cu2 O. These make the energy level of the catalyst be closer to that of H+ /H2 , evidenced by the plasmon-enhanced HER electrocatalytic activity.

Ru and Se Co-Doped Cobalt Hydroxide Electrocatalyst for Efficient Hydrogen Evolution Reactions

The development of efficient electrocatalysts for hydrogen evolution reactions is an extremely important area for the development of green and clean energy. In this work, a precursor material was successfully prepared via electrodeposition of two doping elements to construct a co-doped cobalt hydroxide electrocatalyst (Ru-Co(OH)2-Se). This approach was demonstrated to be an effective way to improve the performance of the hydrogen evolution reaction (HER). The experimental results show that the material exhibited a smaller impedance value and a larger electrochemically active surface area. In the HER process, the overpotential was only 109 mV at a current density of 10 mA/cm2. In addition, the doping of selenium and ruthenium effectively prevented the corrosion of the catalysts, with the (Ru-Co(OH)2-Se) material showing no significant reduction in the catalytic performance after 50 h. This synergistic approach through elemental co-doping demonstrated good results in the HER process.

Tandem cells for unbiased photoelectrochemical water splitting

Hydrogen is an essential energy carrier which will address the challenges posed by the energy crisis and climate change. Photoelectrochemical water splitting (PEC) is an important method for producing solar-powered hydrogen. The PEC tandem configuration harnesses sunlight as the exclusive energy source to drive both the hydrogen (HER) and oxygen evolution reactions (OER), simultaneously. Therefore, PEC tandem cells have been developed and gained tremendous interest in recent decades. This review describes the current status of the development of tandem cells for unbiased photoelectrochemical water splitting. The basic principles and prerequisites for constructing PEC tandem cells are introduced first. We then review various single photoelectrodes for use in water reduction or oxidation, and highlight the current state-of-the-art discoveries. Second, a close look into recent developments of PEC tandem cells in water splitting is provided. Finally, a perspective on the key challenges and prospects for the development of tandem cells for unbiased PEC water splitting are given.

Solar utilization beyond photosynthesis

Natural photosynthesis is an efficient biochemical process which converts solar energy into energy-rich carbohydrates. By understanding the key photoelectrochemical processes and mechanisms that underpin natural photosynthesis, advanced solar utilization technologies have been developed that may be used to provide sustainable energy to help address climate change. The processes of light harvesting, catalysis and energy storage in natural photosynthesis have inspired photovoltaics, photoelectrocatalysis and photo-rechargeable battery technologies. In this Review, we describe how advanced solar utilization technologies have drawn inspiration from natural photosynthesis, to find sustainable solutions to the challenges faced by modern society. We summarize the uses of advanced solar utilization technologies, such as converting solar energy to electrical and chemical energy, electrochemical storage and conversion, and associated thermal tandem technologies. Both the foundational mechanisms and typical materials and devices are reported. Finally, potential future solar utilization technologies are presented that may mimic, and even outperform, natural photosynthesis.

Modulating Co-catalyst/Facet Junction for Enhanced Photoelectrochemical Water Splitting

Rational construction of electric field via assembling appropriate co-catalysts on anisotropic facets is of great significance for improving the photogenerated charge separation efficiency. However, this strategy usually gives rise to Fermi-level pinning which is not contributive to the charge separation but deleterious to the photoelectrochemical performance through consuming the measurable photovoltage. Herein, we demonstrate that manganese dioxide electrodeposited on the (111) facet of titanium dioxide nanorods could tremendously boost the catalytic activity of pristine photoanode via a stronger interface electric field and less photovoltage decay compared with the counterpart grown on the (110) facet. A photocurrent density of 1.65 mA·cm^-2 at 1.23 V (vs reversible hydrogen electrode), nearly the theoretical maximum of titanium dioxide, is achieved by the optimum photoanode with an extremely high separation efficiency of 95.15%. This study offers more in-depth insights into the design of carrier separation strategy through loading co-catalysts on different substrate surfaces for more efficient solar energy conversion.

Sustainable oxygen evolution electrocatalysis in aqueous 1 M H2SO4 with earth abundant nanostructured Co3O4

Earth-abundant electrocatalysts for the oxygen evolution reaction (OER) able to work in acidic working conditions are elusive. While many first-row transition metal oxides are competitive in alkaline media, most of them just dissolve or become inactive at high proton concentrations where hydrogen evolution is preferred. Only noble-metal catalysts, such as IrO₂, are fast and stable enough in acidic media. Herein, we report the excellent activity and long-term stability of Co₃O₄-based anodes in 1 M H₂SO₄ (pH 0.1) when processed in a partially hydrophobic carbon-based protecting matrix. These Co₃O₄@C composites reliably drive O₂ evolution a 10 mA cm^-2 current density for >40 h without appearance of performance fatigue, successfully passing benchmarking protocols without incorporating noble metals. Our strategy opens an alternative venue towards fast, energy efficient acid-media water oxidation electrodes.

Efficient electron extraction by CoS2loaded onto anatase TiO2for improved photocatalytic hydrogen evolution

Titanium dioxide (TiO₂) as a benchmark photocatalyst has been attracting attention due to its photocatalytic activity combined with photochemical stability. In particular, TiO₂with anatase polymorph holds promise for driving reduction reactions, such as proton reduction to evolve H₂via photocatalysis. In this study, anatase TiO₂is loaded with CoS₂through the hydrothermal route to form a CoS₂@TiO₂photocatalyst system. X-ray absorption near edge structure confirms the +2-oxidation state of the Co cation, while extended x-ray absorption fine structure shows that each Co²⁺cation is primarily coordinated to six S^-anions forming a CoS₂-like species. A small fraction of the Co²⁺species is also coordinated to O^2-anions forming Co_xO_yspecies and substitutionally resides at the Ti⁴⁺-sites. Further investigations with steady-state IR absorption induced by UV-light and time-resolved microwave conductivity suggest an efficient electron transfer from the conduction band of TiO₂to the surface-loaded CoS₂which acts as a metallic material with no bandgap. The CoS₂shallowly traps electrons at the host surface and facilitates proton reduction. An appreciably enhanced H₂evolution rate (8 times) is recognised upon the CoS₂loading. The CoS₂is here proposed to function as a proton reduction cocatalyst, which can potentially be an alternative to noble metals.

Fabrication and Characterization of Nanostructured Rock Wool as a Novel Material for Efficient Water-Splitting Application

Rock wool (RW) nanostructures of various sizes and morphologies were prepared using a combination of ball-mill and hydrothermal techniques, followed by an annealing process. Different tools were used to explore the morphologies, structures, chemical compositions and optical characteristics of the samples. The effect of initial particle size on the characteristics and photoelectrochemical performance of RW samples generated hydrothermally was investigated. As the starting particle size of ball-milled natural RW rises, the crystallite size of hydrothermally formed samples drops from 70.1 to 31.7 nm. Starting with larger ball-milled particle sizes, the nanoparticles consolidate and seamlessly combine to form a continuous surface with scattered spherical nanopores. Water splitting was used to generate photoelectrochemical hydrogen using the samples as photocatalysts. The number of hydrogen moles and conversion efficiencies were determined using amperometry and voltammetry experiments. When the monochromatic wavelength of light was increased from 307 to 460 nm for the manufactured RW>0.3 photocatalyst, the photocurrent density values decreased from 0.25 to 0.20 mA/mg. At 307 nm and +1 V, the value of the incoming photon-to-current efficiency was ~9.77%. Due to the stimulation of the H+ ion rate under the temperature impact, the Jph value increased by a factor of 5 when the temperature rose from 40 to 75 °C. As a result of this research, for the first time, a low-cost photoelectrochemical catalytic material is highlighted for effective hydrogen production from water splitting.

Coupling effect between hole storage and interfacial charge transfer over ultrathin CoPi-modified hematite photoanodes

Understanding the functionality of the modification layer in regulating the charge transfer process at the semiconductor/electrolyte interface is of great significance to the rational design of photoelectrocatalytic water oxidation systems. Herein, by systematically investigating and comparing the charge transfer kinetics behaviors over ferrihydrite (Fh)- and cobalt phosphate (CoPi)-modified hematite (Fe₂O₃) photoanodes, we unveiled the essential relation between photocurrent enhancement and the charge transfer process. With the hole-storage material Fh as a reference, it was found that CoPi demonstrates high hole-storage capacity at a low bias region (<1.0 V vs. RHE) due to the effective release of Fermi level pinning. Afterwards, the stored holes would be timely injected into the electrolyte for water oxidation, caused by the enhanced charge separation in the presence of CoPi. In contrast, the decoration of Fh can only slightly passivate the surface states and promote hole injection in the high potential region. Subsequently, superior hole-storage capacity in the low-potential region is recognized as a crucial factor for photocurrent enhancement. These combined results provide new insights into the understanding of interfacial charge transfer kinetics.

Two-Step Process of a Crystal Facet-Modulated BiVO4 Photoanode for Efficiency Improvement in Photoelectrochemical Hydrogen Evolution

The photoactivity of nanoporous bismuth vanadate (BiVO₄, BVO) photoanodes that were fabricated by a two-step process (electrodeposition and then thermal conversion) in photoelectrochemical (PEC) hydrogen (H₂) evolution can be enhanced about 1.44-fold by improving the constitutive ratio of (111̅), (061), and (242̅) crystal facets. The PEC characterization was carried out to investigate the factors altering the performance, which revealed that the crystal facet modulation could improve the photoactivity of the BVO photoanodes. In addition, the orientation-controlled BVO thin-film electrodes are introduced as evidence that the present crystal facet modulation is the positive effect for BVO photoanodes in PEC. The investigation of energy band structures and interfacial charge carrier dynamics of the BVO photoanodes reveals that the crystal facet modulation could result in a shorter lifetime of charge carrier recombination and larger band bending at the interface between BVO and electrolytes. This outcome could improve the charge separation and charge transfer efficiencies of BVO photoanodes, promoting the efficiency of PEC H₂ evolution. Moreover, this crystal facet modulation can combine with co-catalyst decoration to further improve the solar-to-hydrogen efficiency of BVO photoanodes in PEC. This study presents a potential strategy to promote the PEC activity by crystal facet modulation and important insights into the interfacial charge transfer properties of semiconductor photoelectrodes for the application in solar fuel generation.

Nickel-Based Electrocatalysts for Water Electrolysis

Currently, hydrogen production is based on the reforming process, leading to the emission of pollutants; therefore, a substitute production method is imminently required. Water electrolysis is an ideal alternative for large-scale hydrogen production, as it does not produce any carbon-based pollutant byproducts. The production of green hydrogen from water electrolysis using intermittent sources (e.g., solar and eolic sources) would facilitate clean energy storage. However, the electrocatalysts currently required for water electrolysis are noble metals, making this potential option expensive and inaccessible for industrial applications. Therefore, there is a need to develop electrocatalysts based on earth-abundant and low-cost metals. Nickel-based electrocatalysts are a fitting alternative because they are economically accessible. Extensive research has focused on developing nickel-based electrocatalysts for hydrogen and oxygen evolution. Theoretical and experimental work have addressed the elucidation of these electrochemical processes and the role of heteroatoms, structure, and morphology. Even though some works tend to be contradictory, they have lit up the path for the development of efficient nickel-based electrocatalysts. For these reasons, a review of recent progress is presented herein.

Engineering Bimodal Oxygen Vacancies and Pt to Boost the Activity Toward Water Dissociation

Water dissociation is the rate-limiting step of several energy-related reactions due to the high energy barrier required for breaking the oxygen-hydrogen bond. In this work, a bimodal oxygen vacancy (V_O ) catalysis strategy is adopted to boost the efficient water dissociation on Pt nanoparticles. The single facet-exposed TiO₂ surface and NiO_x nanocluster possess two modes of V_O different from each other. In ammonia borane hydrolysis, the highest catalytic activity among Pt-based materials is achieved with the turnover frequency of 618 min^-1 under alkaline-free conditions at 298 K. Theoretical simulation and characterization analyses reveal that the bimodal V_O significantly promotes the water dissociation in two ways. First, an ensemble-inducing effect of Pt and V_O in TiO₂ drives the activation of water molecules. Second, an electron promoter effect induced by the electron transfer from V_O in NiO_x to Pt further enhances the ability of Pt to dissociate water and ammonia borane. This insight into bimodal V_O catalysis establishes a new avenue to rationally design heterogeneous catalytic materials in the energy chemistry field.

Construction of unique heterojunction photoanodes through in situ quasi-epitaxial growth of FeVO4 on Fe2O3 nanorod arrays for enhanced photoelectrochemical performance

By enhancing the separation of photogenerated electron–hole pairs, reducing carrier recombination and the impedance of the interface electrolyte, the FeVO4–Fe2O3 photoanode exhibits obviously enhanced photoelectrochemical performance.

Synthesis of Cobalt-Nickel Nanoparticles via a Liquid-Phase Reduction Process

Cobalt-nickel nanoparticles (Co-Ni-NPs) show promising electrochemical performance in oxygen and hydrogen evolution reactions (OER and HER) due to their physicochemical properties such as electronic configuration and great electrochemical stability. Therefore, developing new economically and environmentally friendly methods of synthesizing Co-Ni-NPs has become a practical requirement. Co-Ni-NPs were produced by employing the liquid-phase reduction method. Nickel and cobalt sulfate solutions in hydrazine monohydrate with various mixing ratios were used as raw materials. Nickel plays an important role in the nucleation process via increasing the reduction reaction rate throughout the formation of Co-Ni-NPs. Furthermore, the acceleration of the Co-Ni-NPs formation process may be attributed to the partial dissolution of Ni(OH)2 in the presence of N2H4 and/or citrate-anions and the formation of the Ni-N2H4 or Ni-Cit complexes in contrast to Co(OH)2.

Design principles of noble metal-free electrocatalysts for hydrogen production in alkaline media: combining theory and experiment

Water electrolysis is a promising solution to convert renewable energy sources to hydrogen as a high-energy-density energy carrier. Although alkaline conditions extend the scope of electrocatalysts beyond precious metal-based materials to earth-abundant materials, the sluggish kinetics of cathodic and anodic reactions (hydrogen and oxygen evolution reactions, respectively) impede the development of practical electrocatalysts that do not use precious metals. This review discusses the rational design of efficient electrocatalysts by exploiting the understanding of alkaline hydrogen evolution reaction and oxygen evolution reaction mechanisms and of the electron structure-activity relationship, as achieved by combining experimental and computational approaches. The enhancement of water splitting not only deals with intrinsic catalytic activity but also includes the aspect of electrical conductivity and stability. Future perspectives to increase the synergy between theory and experiment are also proposed.

Boosting Unassisted Alkaline Solar Water Splitting Using Silicon Photocathode with TiO2 Nanorods Decorated by Edge-Rich MoS2 Nanoplates

To construct a highly efficient photoelectrochemical tandem device with silicon photocathode operating in alkaline conditions, it is desirable to develop stable and active catalysts which enable the photocathode to reliably perform under an alkaline environment. With nanostructured passivation layer and edge-exposed transition metal disulfides, silicon photocathode provides new opportunities for achieving unbiased alkaline solar water splitting. Here, the TiO₂ nanorod arrays decorated by edge-rich MoS₂ nanoplates are elaborately synthesized and deposited on p-Si. The vertically aligned TiO₂ nanorods fully stabilize the Si surface and improve anti-reflectance. Moreover, MoS₂ nanoplates with exposed edge sites provide catalytically active regions resulting in the kinetically favored hydrogen evolution under an alkaline environment. Interfacial energy band bending between p-Si and catalyst layers facilitates the transport of photogenerated electrons under steady-state illumination. Consequently, the MoS₂ nanoplates/TiO₂ nanorods/p-Si photocathode exhibits significantly improved photoelectrochemical-hydrogen evolution reaction (PEC-HER) performance in alkaline media with a high photocurrent density of 10 mA cm^-2 at 0 V versus RHE and high stability. By integrating rationally designed photocathode with earth-abundant Fe₆₀ (NiCo)₃₀ Cr₁₀ anode and perovskite/Si tandem photovoltaic cell, an unassisted alkaline solar water splitting is accomplished with a current density of 5.4 mA cm^-2 corresponding to 6.6% solar-to-hydrogen efficiency, which is the highest among p-Si photocathodes.

Density-Based Descriptors of Redox Reactions Involving Transition Metal Compounds as a Reality-Anchored Framework: A Perspective

Description of redox reactions is critically important for understanding and rational design of materials for electrochemical technologies, including metal-ion batteries, catalytic surfaces, or redox-flow cells. Most of these technologies utilize redox-active transition metal compounds due to their rich chemistry and their beneficial physical and chemical properties for these types of applications. A century since its introduction, the concept of formal oxidation states (FOS) is still widely used for rationalization of the mechanisms of redox reactions, but there exists a well-documented discrepancy between FOS and the electron density-derived charge states of transition metal ions in their bulk and molecular compounds. We summarize our findings and those of others which suggest that density-driven descriptors are, in certain cases, better suited to characterize the mechanism of redox reactions, especially when anion redox is involved, which is the blind spot of the FOS ansatz.

Nanoarray Structures for Artificial Photosynthesis

Conversion and storage of solar energy into fuels and chemicals by artificial photosynthesis has been considered as one of the promising methods to address the global energy crisis. However, it is still far from the practical applications on a large scale. Nanoarray structures that combine the advantages of nanosize and array alignment have demonstrated great potential to improve solar energy conversion efficiency, stability, and selectivity. This article provides a comprehensive review on the utilization of nanoarray structures in artificial photosynthesis of renewable fuels and high value-added chemicals. First, basic principles of solar energy conversion and superiorities of using nanoarray structures in this field are described. Recent research progress on nanoarray structures in both abiotic and abiotic-biotic hybrid systems is then outlined, highlighting contributions to light absorption, charge transport and transfer, and catalytic reactions (including kinetics and selectivity). Finally, conclusions and outlooks on future research directions of nanoarray structures for artificial photosynthesis are presented.

Devising a Polyoxometalate-Based Functional Material as an Efficient Electrocatalyst for the Hydrogen Evolution Reaction

Hydrogen is the solution to all the problems associated with the energy crisis. Generating hydrogen from water splitting is one of the greener approaches, but it requires an efficient catalyst that is economical for the bulk production of hydrogen. The transition metal-aqua coordination complexes, which are otherwise inactive/unstable for electrochemical hydrogen evolution reaction (HER) activity, can efficiently be utilized for the same by attaching these metal-aqua species on a stable support. With a similar approach, we have synthesized and structurally characterized a two-dimensional polyoxometalate (POM)-copper complex hybrid that supports a copper(II)-aqua-bypyridine complex with a molecular formula of the overall system, [{Cu^II(2,2'-bpy)(H₂O)₂}][{Co^IIW^VI₁₂O₄₀}{Cu^II(2,2'-bpy)(H₂O)}{Cu^II(2,2'-bpy)}]·2H₂O (1). The bis(aqua)-mono(bipyridine) Cu(II)-complex fragment {Cu^II(2,2'-bpy)(H₂O)₂}²⁺, attached to the two-dimensional POM-Cu-complex support, acts as an active catalytic center that catalyzes the electrochemical HER. The electrochemical studies done for this work enabled us to understand the role of compound 1 as an electrocatalyst for the HER in near-neutral medium (pH 4.8), under buffered conditions (acetate buffer). Through detailed electrochemical experiments including controlled ones, we understand that compound 1 follows a proton-coupled electron transfer (PCET) pathway with one proton and one electron involvement in the HER. The overpotential required to achieve a current density of 1 mA/cm² is found to be 520 mV with a Faradaic efficiency of 81%.

Drop-casted Platinum Nanocube Catalysts for Hydrogen Evolution Reaction with Ultrahigh Mass Activity

Platinum hydrogen evolution reaction (HER) electrocatalysts in the form of nanocubes (NCs) were synthesized at 50 °C by aqueous-based colloidal synthesis and were applied to electrochemical (EC) and photoelectrochemical (PEC) systems by a fast and simple drop-casting method. A remarkable Pt mass activity of 1.77 A mg^-1 at -100 mV was achieved in EC systems (fluorine-doped tin oxide/Pt NC cathode) with neutral electrolyte while maintaining low overpotential and Tafel slope. In the Cu(In,Ga)(S,Se)₂ (CIGS)-based PEC system, a carefully chosen amount of Pt NC loading to achieve a compromise between the catalytic activity (more Pt NCs) and better light transmittance (fewer Pt NCs) led to a maximum onset potential of 0.678 V against the reference hydrogen electrode. The photoelectrodes with Pt NCs also exhibited good long-term operational stability over 9.5 h with negligible degradation of the photocurrent. This study presents an effective strategy to greatly reduce the use of expensive Pt without compromising the catalytic performance because the drop-casting of Pt NC solutions to form electrocatalysts is expected to waste less raw material than vacuum deposition.

Hole-Storage Enhanced a-Si Photocathodes for Efficient Hydrogen Production

Ferrihydrite (Fh) has been demonstrated as an effective interfacial layer for photoanodes to achieve outstanding photoelectrochemical (PEC) performance for water oxidation reaction owing to its unique hole-storage function. However, it is unknown whether such a hole-storage layer can be used to construct highly efficient photocathodes for hydrogen evolution reaction (HER). In this work, we report Fh interfacial engineering of amorphous silicon photocathode (with nickel as HER cocatalyst) achieving a photocurrent density of 15.6 mA cm^-2 at 0 V vs. the reversible hydrogen electrode and a half-cell energy conversion efficiency of 4.08 % in alkaline solution, outperforming most of reported a-Si based photocathodes including multi-junction configurations integrated with noble metal cocatalysts in acid solution. Besides, the photocurrent density is maintained above 14 mA cm^-2 for 175 min with 100 % Faradaic efficiency for HER in alkaline solution. Our results demonstrate a feasible approach to construct efficient photocathodes via the application of a hole-storage layer.

Engineering Heterogeneous NiS2 /NiS Cocatalysts with Progressive Electron Transfer from Planar p-Si Photocathodes for Solar Hydrogen Evolution

The sluggish transfer of electrons from a planar p-type Si (p-Si) semiconductor to a cocatalyst restricts the activity of photoelectrochemical (PEC) hydrogen evolution. To overcome such inefficiency, an elegant interphase of the semiconductor/cocatalyst is generally necessary. Hence, in this work, a NiS₂ /NiS heterojunction (NNH) is prepared in situ and applied to a planar p-Si substrate as a cocatalyst to achieve progressive electron transfer. The NNH/Si photocathode exhibits an onset potential of +0.28 V versus reversible hydrogen electrode (V_RHE ) and a photocurrent density of 18.9 mA·cm^-2 at 0 V_RHE , as well as a 0.9% half-cell solar-to-hydrogen efficiency, which is much superior compared with those of NiS₂ /Si and NiS/Si photocathodes. The enhanced performance for NNH/Si is attributed to the contact between the sectional n-type semiconducting NNH and the planar p-Si semiconductor through a p-Si/n-NiS/n-NiS₂ manner that functions as a local pn-junction to promote electron transfer. Thus, the photogenerated electron is transferred from p-Si to n-NiS within NNH as the progressive medium, followed by to Ni²⁺ and/or S₂ ^2- of the defect-rich n-NiS₂ phase as the key active sites. This systematic work may pave the way for planar Si-based PEC applications of heterogeneous metal sulfide cocatalysts through the progressive transfer of electrons.

A three-dimensional flower-like NiCo-layered double hydroxide grown on nickel foam with an MXene coating for enhanced oxygen evolution reaction electrocatalysis

Electrolysis of water is currently one of the cleanest and most efficient ways to produce high-purity hydrogen. The oxygen evolution reaction (OER) at the anode of electrolysis is the key factor affecting the reaction efficiency, which involves the transfer of four electrons and can slow down the overall reaction process. In this work, using nickel foam coated with MXene (Ti3C2T x ) as the carrier, a three-dimensional flower-shaped layered double hydroxide (NiCo-LDH) is grown on Ti3C2T x by a hydrothermal method to fabricate a NiCo-LDH/Ti3C2T x /NF hybrid electrocatalyst for enhanced OER performance. The results reveal that the hybrid electrocatalyst has excellent OER activity in alkaline solution, in which a low overpotential of 223 mV and a small Tafel slope of 47.2 mV dec-1 can be achieved at a current density of 100 mA cm-2. The interface interaction and charge transfer between Ti3C2T x and NiCo-LDH can accelerate the electron transfer rate during the redox process and improve the catalytic activity of the overall reaction. This NiCo-LDH/Ti3C2T x /NF hybrid electrocatalyst may have important research significance and great application potential in catalytic electrolysis of water.

Synthesis and control strategies of nanomaterials for photoelectrochemical water splitting

Photoelectrochemical water splitting to produce hydrogen using solar energy can capture and directly convert solar energy into chemical energy, which is an effective way to deal with the current energy and environmental problems. The conversion efficiency of solar energy depends on the performance of semiconductor photoelectrodes in photoelectrochemical water splitting. This article presents our recent advances in the design and performance control of high-efficiency photoelectrocatalytic materials, followed by the discussion of the strategies employed for improving the performances of photoelectrodes in terms of photon absorption, charge separation and migration, as well as surface chemical reactions.

Atomic/molecular layer deposition for energy storage and conversion

Energy storage and conversion systems, including batteries, supercapacitors, fuel cells, solar cells, and photoelectrochemical water splitting, have played vital roles in the reduction of fossil fuel usage, addressing environmental issues and the development of electric vehicles. The fabrication and surface/interface engineering of electrode materials with refined structures are indispensable for achieving optimal performances for the different energy-related devices. Atomic layer deposition (ALD) and molecular layer deposition (MLD) techniques, the gas-phase thin film deposition processes with self-limiting and saturated surface reactions, have emerged as powerful techniques for surface and interface engineering in energy-related devices due to their exceptional capability of precise thickness control, excellent uniformity and conformity, tunable composition and relatively low deposition temperature. In the past few decades, ALD and MLD have been intensively studied for energy storage and conversion applications with remarkable progress. In this review, we give a comprehensive summary of the development and achievements of ALD and MLD and their applications for energy storage and conversion, including batteries, supercapacitors, fuel cells, solar cells, and photoelectrochemical water splitting. Moreover, the fundamental understanding of the mechanisms involved in different devices will be deeply reviewed. Furthermore, the large-scale potential of ALD and MLD techniques is discussed and predicted. Finally, we will provide insightful perspectives on future directions for new material design by ALD and MLD and untapped opportunities in energy storage and conversion.

Stimuli responsive multicolour fluorescence emission in carbon nanodots and application in metal free hydrogen evolution from water

The present study convincingly demonstrates visible light induced continuous tuning of the fluorescence of carbon nanodots from yellow to cyan within two hours. These carbon dots are well characterized using field emission gun transmission electron microscopy (FEG-TEM), X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FT-IR), fluorescence spectroscopy and UV-visible spectroscopy. Moreover, solid state fluorescence of different wavelengths has also been obtained from these colour tunable carbon dots by circumventing the common problem of aggregation induced quenching of fluorescence in the solid state. These carbon dots have also shown a very low band gap and the yellow emissive C-dots have been successfully utilized as a photocathode in metal free photo-electrochemical hydrogen evolution from water.

Solar-enhanced hybrid lithium-oxygen batteries with a low voltage and superior long-life stability

Lithium-oxygen batteries (LOBs) can suffer from large charge overpotentials during the sluggish oxygen evolution reaction (OER). Here, a strategy used in the photo-electrochemical (PEC) water oxidation area is integrated into hybrid LOBs. Coating α-Fe₂O₃ with NiOOH results in enhanced electrochemical properties, and the as-assembled hybrid LOBs deliver a low charge voltage of 3.03 V, high energy efficiency of 88%, and long-term stability for over 350 hours.

Chemical Activation of Water Molecule by Collision with Spin-Orbit-State-Selected Vanadium Cation: Quantum-Electronic-State Control of Chemical Reactivity

We have obtained absolute integral cross sections (σ's) for the reactions of spin-orbit-state-selected vanadium cations, V⁺[a⁵D_J(J = 0, 2), a⁵F_J(J = 1, 2), and a³F_J(J = 2, 3)], with a water molecule (H₂O) in the center-of-mass collision energy range E_cm = 0.1-10.0 eV. On the basis of these state-selected σ curves (σ versus E_cm plots) observed, three reaction product channels, VO⁺ + H₂, VH⁺ + OH, and VOH⁺ + H, from the V⁺ + H₂O reaction are unambiguously identified. Contrary to the previous guided ion beam study of the V⁺(a⁵D_J) + D₂O reaction, we have observed the formation of the VO⁺ + H₂ channel from the V⁺(a⁵D_J) + H₂O ground reactant state at low E_cm's (<3.0 eV). No spin-orbit J-state dependences for the σ curves of individual electronic states are discernible, indicating that spin-orbit interactions are weak with little effect on chemical reactivity of the titled reaction. For the three product channels identified, the triplet σ(a³F_J) values are overwhelmingly higher than the quintet σ(a⁵D_J) and σ(a⁵F_J) values, showing that the reaction is governed by a "weak quintet-triplet spin crossing" mechanism, favoring the conservation of total electron spins. The σ curves for exothermic product channels are found to exhibit a rapid decreasing profile as E_cm is increased, an observation consistent with the prediction of the charge-dipole and induced-dipole orbiting model. This experiment shows that the V⁺ + H₂O reaction can be controlled effectively to produce predominantly the VO⁺ + H₂ channel via the V⁺(a³F_J) + H₂O reaction at low E_cm's (≤0.1 eV) and that the ion-molecule reaction dynamics can be altered readily by selecting the electronic state of V⁺ cation. On the basis of the measured E_cm thresholds for the σ(a⁵D_J, a⁵F_J, and a³F_J: VH⁺) and σ(a⁵D_J, a⁵F_J, and a³F_J: VOH⁺) curves, we have deduced upper bound values of 2.6 ± 0.2 and 4.3 ± 0.3 eV for the 0 K bond dissociation energies, D₀(V⁺-H) and D₀(V⁺-OH), respectively. After correcting for the kinetic energy distribution resulting from the Doppler broadening effect of the H₂O molecule, we obtain D₀(V⁺-H) = 2.2 ± 0.2 eV and D₀(V⁺-OH) = 4.0 ± 0.3 eV, which are in agreement with D₀ determinations obtained by σ curve simulations.