Few-Layered Tin Sulfide Nanosheets Supported on Reduced Graphene Oxide as a High-Performance Anode for Potassium-Ion Batteries

Liquid-Phase Exfoliation of Arsenic Trisulfide (As2S3) Nanosheets and Their Use as Anodes in Potassium-Ion Batteries

Here, we demonstrate the production of 2D nanosheets of arsenic disulfide (As2S3) via liquid-phase exfoliation of the naturally occurring mineral, orpiment. The resultant nanosheets had mean lateral dimensions and thicknesses of 400 and 10 nm, and had structures indistinguishable from the bulk. The nanosheets were solution mixed with carbon nanotubes and cast into nanocomposite films for use as anodes in potassium-ion batteries. These anodes exhibited outstanding electrochemical performance, demonstrating an impressive discharge capacity of 619 mAh/g at a current density of 50 mA/g. Even after 1000 cycles at 500 mA/g, the anodes retained an impressive 94% of their capacity. Quantitative analysis of the rate performance yielded a capacity at a very low rate of 838 mAh/g, about two-thirds of the theoretical capacity of As2S3 (1305 mAh/g). However, this analysis also implied As2S3 to have a very small solid-state diffusion coefficient (∼10-17 m2/s), somewhat limiting its potential for high-rate applications.

Tailoring Stress-Relieved Structure for SnSe Toward High Performance Potassium Ion Batteries

Metal chalcogenides as an ideal family of anode materials demonstrate a high theoretical specific capacity for potassium ion batteries (PIBs), but the huge volume variance and poor cyclic stability hinder their practical applications. In this study, a design of a stress self-adaptive structure with ultrafine SnSe nanoparticles embedded in carbon nanofiber (SnSe@CNF) via the electrospinning technology is presented. Such an architecture delivers a record high specific capacity (272 mAh g-1 at 50 mA g-1) and high-rate performance (125 mAh g-1 at 1 A g-1) as a PIB anode. It is decoded that the fundamental understanding for this great performance is that the ultrafine SnSe particles enhance the full utilization of the active material and achieve stress relief as the stored strain energy from cycling is insufficient to drive crack propagation and thus alleviates the intrinsic chemo-mechanical degradation of metal chalcogenides.

Boosting sodium-ion battery performance by anion doping in NASICON Na4MnCr(PO4)3 cathode

Na superionic conductor (NASICON)-structured Na4MnCr(PO4)3 (NMCP) possessing unique three-electron transfer process renders admirable energy density for sodium ion batteries (SIBs). However, the current issues like its sluggish Na+ diffusion kinetics, deficient intrinsic conductivity, and unsatisfactory structural stability, hinder its practical application. Herein, a selective replacement of O elements in PO4 group by Cl anions in the NMCP system was developed to significantly enhance its electrochemical performance. The results affirm that the enhanced performance of Cl doped samples can be attributed to the enlargement of cell size, the creation of Na vacancies and the weakness of Na2O bond after Cl doping. The as-prepared Na3.85□0.15MnCr(PO3.95Cl0.05)3/C (NMCPC - 15/C) cathode delivers a high capacity (128.0 mAh/g at 50 mA g-1) and excellent rate performance (73.0 mAh/g at 1000 mA g-1) in contrast to NMCP/C that merely provides 105.2 mAh/g at 50 mA g-1 and reduces to 47.4 mAh/g at 1000 mA g-1. Meanwhile, NMCPC - 15/C shows a capacity retention of 60.7 % at 1000 mA g-1 after 500 cycles, while only 37.1 % for NMCP/C in the same test conditions. Moreover, the satisfactory performance and energy density of NMCPC - 15/C||hard carbon (HC) full cell confirm the potential practicality of NMCPC - 15. Therefore, chloride ions doping into NMCP has practical application prospects in the preparation of high-performance cathode materials and our work also offers new inspiration to apply anion doping strategies in promoting the performance of the other NASICON-structured cathodes for SIBs.

Thermal Induced Conversion of CoFe Prussian Blue Analogs Nanocubes Wrapped by Doped Carbon Network Exhibiting Fast and Stable Potassium Ion Storage as Anode

Prussian blue analogs (PBAs) show great promise as anode materials for potassium-ion batteries (PIBs) due to their high specific capacity. However, PBAs still suffer from the drawbacks of low electronic conductivity and poor structural stability, leading to inadequate rate and cyclic performance. To address these limitations, CoFe PBA nanocubes wrapped with N/S doped carbon network (CoFe PBA@NSC) as anode for PIBs is designed by using thermal-induced in situ conversion strategy. As expected, the structural advantages of nanosized PBA cubes, such as abundant interfaces and large surface area, enable the CoFe PBA@NSC electrode to demonstrate superior rate properties (557 and 131 mAh g-1 at 0.05 and 10 A g-1) and low capacity degradation (0.093% per cycle over 1000 cycles at 0.5 A g-1). Furthermore, several ex situ characterizations revealed the K-ion storage mechanism. Fe+ and Co0 are generated during potassicization, followed by a completely reversible chemical state of iron while some cobalt monomers remained during depotassication. Additionally, the as-built potassium-ion hybrid capacitor based on CoFe PBA@NSC anode exhibits a high energy density of 118 Wh kg-1. This work presents an alternative but promising synthesis route for Prussian blue analogs, which is significant for the advancement of PIBs and other related energy storage devices.

Constructing Hollow Microcubes SnS2 as Negative Electrode for Sodium-ion and Potassium-ion Batteries

Sodium/potassium-ion batteries (NIBs and KIBs) are considered the most promising candidates for lithium-ion batteries in energy storage fields. Tin sulfide (SnS2) is regarded as an attractive negative candidate for NIBs and KIBs thanks to its superior power density, high-rate performance and natural richness. Nevertheless, the slow dynamics, the enormous volume change and the decomposition of polysulfide intermediates limit its practical application. Herein, microcubes SnS2 were prepared through sacrificial MnCO3 template-assisted and a facile solvothermal reaction strategy and their performance was investigated in Na and K-based cells. The unique hollow cubic structure and well-confined SnS2 nanosheets play an important role in Na+/K+ rapid kinetic and alleviating volume change. The effect of the carbon additives (Super P/C65) on the electrochemical properties were investigated thoroughly. The in operando and ex-situ characterization provide a piece of direct evidence to clarify the storage mechanism of such conversion-alloying type negative electrode materials.

Structural engineering of SnS quantum dots embedded in N, S Co-Doped carbon fiber network for ultrafast and ultrastable sodium/potassium-ion storage

Tin sulfides have received significant attention as potential candidates for sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs) due to their abundance, high theoretical capacity, and favorable working potential. However, the inherent drawbacks such as slow kinetics, low intrinsic electronic conductivity, and significant volume change during cycling, have not been adequately addressed. In this study, we propose a rational and effective approach to simultaneously overcome these challenges by embedding stannous sulfide (SnS) quantum dots (QDs) within a crosslinked nitrogen (N) and sulfur (S) co-doped carbon fiber network (SnS-CFN). The well-dispersed and densely packed SnS QDs, measuring approximately 2 nm, not only minimize the diffusion distance of Na+/K+ ions but also buffer the volume expansion effectively. The N, S co-doped carbon fiber network in SnS-CFN serves as a highly conductive and stable support structure that inhibits SnS QDs aggregation, creates ion/electron transport channels, and alleviates volume variations. Density functional theory (DFT) calculations further confirm that the combination of SnS QDs and the N, S co-doped carbon effectively reduces the adsorbed energies in the interlayer of SnS-CFN. These advantages synergistically contribute to the exceptional sodium/potassium storage performance of the SnS-CFN composite. Consequently, SnS-CFN demonstrates exceptional cyclability, retaining a capacity of 251.5 mAh/g over 10,000 cycles, and exhibits excellent rate capability (299.5 mAh/g at 20 A/g) when employed in SIBs. When used in PIBs, a high capacity of 112.3 mAh/g at 2 A/g after 1000 cycles, a remarkable capacity of 51.4 mAh/g at 5 A/g after 10,000 cycles, and a remarkable rate capability with a specific capacity of 55.5 mAh/g at a high current density of 20 A/g have been achieved.

Fe2O3 for stable K-ion storage: mechanism insight into dimensional construction from stress distribution and micro-tomography

Fe2O3 is considered a potential electrode material owing to its high theoretical capacity, low cost, and non-toxic characteristics. However, the significant volume expansion and structural degradation during charging and discharging hinder its application in potassium ion batteries. The electrochemical properties of the electrode material are primarily influenced by the diffusion efficiency of ions and the mechanics of the object. From the construction of a one dimensional structure, a three-dimensional flower-like Fe2O3 with a high specific surface and low-dimensional spherical Fe2O3 were prepared. Considering the convenience and visualization of the research, micron-scale Fe2O3 was prepared, although the larger particle size will lose part of the capacity. Notably, compared with the spherical structure, the specific capacity of the flower structure was increased by about 100%. The von Mises stress distribution on the two structures was simulated by the finite element method, revealing the mechanism of electrode failure induced by volume expansion and confirming the vital role of the multidimensional system in relieving stress concentration and improving electrochemical performance. Furthermore, synchrotron radiation soft X-ray absorption spectrum and X-ray micro-tomography revealed the phase transformation process and reaction mechanism of Fe2O3 in potassium ion batteries. The dimensional structure construction strategy reported here can provide theoretical support for modifying transition metal oxides.

Construction of Porous Carbon Nanosheet/Cu2S Composites with Enhanced Potassium Storage

Porous C nanosheet/Cu2S composites were prepared using a simple self-template method and vulcanization process. The Cu2S nanoparticles with an average diameter of 140 nm are uniformly distributed on porous carbon nanosheets. When used as the anode of a potassium-ion battery, porous C nanosheet/Cu2S composites exhibit good rate performance and cycle performance (363 mAh g-1 at 0.1 A g-1 after 100 cycles; 120 mAh g-1 at 5 A g-1 after 1000 cycles). The excellent electrochemical performance of porous C nanosheet/Cu2S composites can be ascribed to their unique structure, which can restrain the volume change of Cu2S during the charge/discharge processes, increase the contact area between the electrode and the electrolyte, and improve the electron/ionic conductivity of the electrode material.

Transition metal chalcogenides for next-generation energy storage

Transition-metal chalcogenide nanostructures provide a unique material platform to engineer next-generation energy storage devices such as lithium-ion, sodium-ion, and potassium-ion batteries and flexible supercapacitors. The transition-metal chalcogenide nanocrystals and thin films have enhanced electroactive sites for redox reactions and hierarchical flexibility of structure and electronic properties in the multinary compositions. They also consist of more earth-abundant elements. These properties make them attractive and more viable new electrode materials for energy storage devices compared to the traditional materials. This review highlights the recent advances in chalcogenide-based electrodes for batteries and flexible supercapacitors. The viability and structure-property relation of these materials are explored. The use of various chalcogenide nanocrystals supported on carbonaceous substrates, two-dimensional transition metal chalcogenides, and novel MXene-based chalcogenide heterostructures as electrode materials to improve the electrochemical performance of lithium-ion batteries is discussed. The sodium-ion and potassium-ion batteries offer a more viable alternative to lithium-ion technology as they consist of readily available source materials. Application of various transition metal chalcogenides such as MoS2, MoSe2, VS2, and SnSx, composite materials, and heterojunction bimetallic nanosheets composed of multi-metals as electrodes to enhance the long-term cycling stability, rate capability, and structural strength to counteract the large volume expansion during the ion intercalation/deintercalation processes is highlighted. The promising performances of layered chalcogenides and various chalcogenide nanowire compositions as electrodes for flexible supercapacitors are also discussed in detail. The review also details the progress made in new chalcogenide nanostructures and layered mesostructures for energy storage applications.

Pillar strategy enhanced ion transport and structural stability toward ultra-stable KVPO4F cathode for practical potassium-ion batteries

KVPO₄F (KVPF) is a promising cathode material for potassium-ion batteries (PIBs) because of its high operating voltage, high energy density, and excellent thermal stability. Nevertheless, the low kinetics and large volume change have been the major hurdles causing irreversible structural damage, high inner resistance, and poor cycle stability. Herein, a pillar strategy of Cs⁺ doping in KVPO₄F is introduced to reduce the energy barrier for ion diffusion and volume change during potassiation/depotassiation, which significantly enhances the K⁺ diffusion coefficient and stabilizes the crystal structure of the material. Consequently, the K_0.95Cs_0.05VPO₄F (Cs-5-KVPF) cathode exhibits an excellent discharge capacity of 104.5 mAh g^-1 at 20 mA g^-1 and a capacity retention rate of 87.9% after 800 cycles at 500 mA g^-1. Importantly, Cs-5-KVPF//graphite full cells attain an energy density of 220 Wh kg^-1 (based on the cathode and anode weight) with a high operating voltage of 3.93 V and 79.1% capacity retention after 2000 cycles at 300 mA g^-1. The Cs-doped KVPO₄F cathode successfully innovates the ultra-durable and high-performance cathode materials for PIBs, demonstrating its considerable potential for practical applications.

Electrospun carbon-based nanomaterials for next-generation potassium batteries

Rechargeable potassium (K) batteries that are of low cost, with high energy densities and long cycle lives have attracted tremendous interest in affordable and large-scale energy storage. However, the large size of the K-ion leads to sluggish reaction kinetics and causes a large volume variation during the ion insertion/extraction processes, thus hindering the utilization of active electrode materials, triggering a serious structural collapse, and deteriorating the cycling performance. Therefore, the exploration of suitable materials/hosts that can reversibly and sustainably accommodate K-ions and host K metals are urgently needed. Electrospun carbon-based materials have been extensively studied as electrode/host materials for rechargeable K batteries owing to their designable structures, tunable composition, hierarchical pores, high conductivity, large surface areas, and good flexibility. Here, we present the recent developments in electrospun CNF-based nanomaterials for various K batteries (e.g., K-ion batteries, K metal batteries, K-chalcogen batteries), including their fabrication methods, structural modulation, and electrochemical performance. This Feature Article is expected to offer guidelines for the rational design of novel electrospun electrodes for the next-generation K batteries.

Robust Biomass-Derived Carbon Frameworks as High-Performance Anodes in Potassium-Ion Batteries

Potassium-ion batteries (PIBs) have become one of the promising candidates for electrochemical energy storage that can provide low-cost and high-performance advantages. The poor cyclability and rate capability of PIBs are due to the intensive structural change of electrode materials during battery operation. Carbon-based materials as anodes have been successfully commercialized in lithium- and sodium-ion batteries but is still struggling in potassium-ion battery field. This work conducts structural engineering strategy to induce anionic defects within the carbon structures to boost the kinetics of PIBs anodes. The carbon framework provides a strong and stable structure to accommodate the volume variation of materials during cycling, and the further phosphorus doping modification is shown to enhance the rate capability. This is found due to the change of the pore size distribution, electronic structures, and hence charge storage mechanism. The optimized electrode in this work shows a high capacity of 175 mAh g^-1 at a current density of 0.2 A g^-1 and the enhancement of rate performance as the PIB anode (60% capacity retention with the current density increase of 50 times). This work, therefore provides a rational design for guiding future research on carbon-based anodes for PIBs.

High-Performance Aqueous Zinc-Ion Batteries Enabled by Binder-Free and Ultrathin V2O5-x@Graphene Aerogels with Intercalation Pseudocapacitance

As a result of the absence of solid-state diffusion limitation, intercalation pseudocapacitance behavior is emerging as an attractive charge-storage mechanism that can greatly facilitate the ion kinetics to boost the rate capability and cycle stability of batteries; however, related research in the field of zinc-ion batteries (ZIBs) is still in the initial stage and only found in limited cathode materials. In this study, a novel V₂O_5-x@rGO hybrid aerogel consisting of ultrathin V₂O₅ nanosheets (∼1.26 nm) with abundant oxygen vacancies (Vö) and a three-dimensional (3D) graphene conductive network was specifically designed and used as a freestanding and binder-free electrode for ZIBs. As expected, the ideal microstructure of both the material and the electrode enable fast electron/ion diffusion kinetics of the electrode, which realize a typical intercalation pseudocapacitance behavior as demonstrated by the simulation calculation of cyclic voltammetry (CV), ex situ X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and first-principles density functional theory (DFT) calculation. Thanks to the elimination of solid-state diffusion limitation, the V₂O_5-x@rGO electrode delivers a high reversible rate capacity of 153.9 mAh g^-1 at 15 A g^-1 and 90.6% initial capacity retention at 0.5 A g^-1 after 1050 cycles in ZIBs. The intercalation pseudocapacitance behavior is also realized in the assembled soft-pack battery, showing promising practical application prospects.

Filling Selenium into Sulfur Vacancies in Ultrathin Tungsten Sulfide Nanosheets for Superior Potassium Storage

The development of WS₂ as an anode for potassium-ion batteries (PIBs) is severely confined by the low K⁺ storage capacity and poor intrinsic electrical conductivity. Our previous study demonstrated that the creation of sulfur vacancies (V_S) in WS₂ can enhance its K⁺ storage capability. However, it is a big challenge to keep the stability of V_S while reserving the excellent activity. Herein, we design Se-filled WS₂ nanosheets with V_S (V_S-WS₂-Se NS) for PIBs. The Se heteroatom filling into the V_S can not only stabilize and activate them, rendering more active sites to adsorb K⁺, but also further enhance the electrical conductivity. Consequently, the V_S-WS₂-Se NS anode presents significantly promoted storage capacity and reaction kinetics, superior to the pristine WS₂ and WS₂ with only V_S. Remarkably, the V_S-WS₂-Se NS anode exhibits the highest specific capacity of 363.9 mA h g^-1 at 0.05 A g^-1. Simultaneously, a high reversible capacity of 144.2 mA h g^-1 after 100 cycles at 2.0 A g^-1 is shown. Ex situ analyses demonstrated that the potassium storage mechanism involves the intercalation and conversion reaction between WS₂ and K⁺. Moreover, DFT calculations revealed that the Se filling into V_S can further enhance the electrical conductivity and reduce the K-insertion energy barriers of WS₂ and thus account for the outstanding electrochemical performance. This study demonstrates that engineering the vacancies by the heteroatom filling strategy offers a novel and feasible route for designing high-performance electrode materials in various energy-storage systems.

Insights into the Potassium Ion Storage Behavior and Phase Evolution of a Tailored Yolk-Shell SnSe@C Anode

Tin chalcogenides are regarded as promising anode materials for potassium ion batteries (PIBs) due to their considerable specific capacity. However, the severe volume effect, limited electronic conductivity, and the shuttle effect of the potassiation product restrict the application prospect. Herein, based on the metal evaporation reaction, a facile structural engineering strategy for yolk-shell SnSe encapsulated in carbon shell (SnSe@C) is proposed. The internal void can accommodate the volume change of the SnSe core and the carbon shell can enhance the electronic conductivity. Combining qualitative and quantitative electrochemical analyses, the distinguished electrochemical performance of SnSe@C anode is attributed to the contribution of enhanced capacitive behavior. Additionally, first-principles calculations elucidate that the heteroatomic doped carbon exhibits a preferable affinity toward potassium ions and the potassiation product K₂ Se, boosting the rate performance and capacity retention consequently. Furthermore, the phase evolution of SnSe@C electrode during the potassiation/depotassiation process is clarified by in situ X-ray diffraction characterization, and the crystal transition from the SnSe Pnma(62) to Cmcm(63) point group is discovered unpredictably. This work demonstrates a pragmatic avenue to tailor the SnSe@C anode via a facile structural engineering strategy and chemical regulation, providing substantial clarification for the phase evolution mechanism of SnSe-based anode for PIBs.

Rational Design Hierarchical SnS2 Uniformly Adhered to Three-Sided Carbon Active Sites to Enhance Sodium Storage

Reducing material accumulation and designing reasonable sizes are critical strategies for increasing the rate and cycling stability of electrode materials. Herein, we presented a double-walled hollow carbon spheres (DWHCSs) loading strategy for achieving ultrafine SnS₂ nanosheet adhesion by utilizing three-sided active sites of the interior/exterior carbon walls. The structure effectively shortened the electron/ion transport path, increased the effective contact between electrolyte and electrode material, and promoted ion diffusion kinetics. Furthermore, the hollow structure can adapt to the volume change of the electrode during the cycle, preventing active substances from draining. Based on the above advantages, SnS₂@DWHCSs as an anode material for sodium ion batteries (SIBs) exhibited a distinguished reversible capacity of 665.7 mA h g^-1 at 2 A g^-1 after 1000 cycles, and a superior rate ability of 377.6 mA h g^-1 at an ultrahigh rate of 10 A g^-1. The outstanding electrochemical performance revealed that the structure exhibited a broad application prospect in the field of energy storage and provided a reference for the rational design of other 2D materials.

Expanding the ReS2 Interlayer Promises High-Performance Potassium-Ion Storage

Improving the electrochemical kinetics and the intrinsic poor conductivity of transition metal dichalcogenide (TMD) electrodes is meaningful for developing next-generation energy storage systems. As one of the most promising TMD anode materials, ReS₂ shows attractive performance in potassium-ion batteries (PIBs). To overcome the poor kinetic ion diffusion and limited cycling stability of the ReS₂-based electrode, herein, the interlayer distance expanding strategy was employed, and reduced graphene oxide (rGO) was introduced into ReS₂. Few-layered ReS₂ nanosheets were grown on the surface of the rGO with expanded interlayer distance. The prepared ReS₂ nanosheets show an expanded distance (∼0.77 nm). The synthesized EI-ReS₂@rGO composites were used in PIBs as anode materials. The K-ion storage mechanism of the ReS₂-based anode was investigated by in situ X-ray diffraction (XRD) technology, which shows the intercalation and conversion types. The EI-ReS₂@rGO nanocomposites show high specific capacities of 432.5, 316.5, and 241 mAh g^-1 under 0.05, 0.2, and 1.0 A g^-1 current densities and exhibit excellent reversibility at 1.0 A g^-1. Overall, this strategy, which finely tunes the local chemistry and orbital hybridization for high-performance PIBs, will open up a new field for other materials.

High-performance K-ion half/full batteries with superb rate capability and cycle stability

SignificanceThe present work might be significant for exploring advanced K-ion batteries with superb rate capability and cycle stability toward practical applications. The as-assembled K-ion half cell exhibits an excellent rate capability of 428 mA h g^-1 at 100 mA g^-1 and a high reversible specific capacity of 330 mA h g^-1 with 120% specific capacity retention after 2,000 cycles at 2,000 mA g^-1, which is the best among those based on carbon materials. The as-constructed full cell delivers 98% specific capacity retention over 750 cycles at 500 mA g^-1, superior to most of those based on carbon materials that have been reported thus far.

Understanding Synthesis and Structural Variation of Nanomaterials Through In Situ/Operando XAS and SAXS

Nanostructured materials with high surface area and low coordinated atoms present distinct intrinsic properties from their bulk counterparts. However, nanomaterials' nucleation/growth mechanism during the synthesis process and the changes of the nanomaterials in the working state are still not thoroughly studied. As two indispensable methods, X-ray absorption spectroscopy (XAS) provides nanomaterials' electronic structure and coordination environment, while small-angle X-ray scattering (SAXS) offers structural properties and morphology information. A combination of in situ/operando XAS and SAXS provides high temporal and spatial resolution to monitor the evolution of nanomaterials. This review gives a brief introduction to in situ/operando SAXS/XAS cells. In addition, the application of in situ/operando XAS and SAXS in preparing nanomaterials and studying changes of working nanomaterials are summarized.

Sheet-Like Stacking SnS2/rGO Heterostructures as Ultrastable Anodes for Lithium-Ion Batteries

SnS₂-based materials have attracted considerable attention in energy storage and conversion owing to their high lithium activity and theoretical capacity. However, the practical application is severely limited by the low coulombic efficiency and short cycle life due to irreversible side reactions, low conductivity, and serious pulverization in the discharge/charge process. In this study, sheet-like stacking SnS₂/reduced graphene oxide (rGO) heterostructures were developed using a facile solvothermal method. It was found that the composites between SnS₂ nanoplates and rGO nanosheets are closely coupled through van der Waals interactions, providing efficient electron/ion paths to ensure high electrical conductivity and sufficient buffer space to alleviate volume expansion. Therefore, the SnS₂/rGO heterostructure anode can obtain a high capacity of 840 mA h g^-1 after 120 cycles at a current density of 200 mA g^-1 and maintain a capacity of 450 mA h g^-1 after 1000 cycles at 1000 mA g^-1. In situ X-ray diffraction tests showed that SnS₂/rGO undergoes typical initial intercalation, conversion, and subsequent alloying reactions during the first discharge, and most of the reactions are dealloying/alloying in the subsequent cycles. The galvanostatic intermittent titration technique showed that the diffusion of lithium ions in the SnS₂/rGO heterostructures is faster in the intercalation and conversion reactions than in the alloying reactions. These observations help to clarify the reaction mechanism and ion diffusion behavior in the SnS₂ anode materials, thus providing valuable insights for improving the energy efficiency of lithium-ion batteries.

A Silicon Monoxide Lithium-Ion Battery Anode with Ultrahigh Areal Capacity

Silicon monoxide (SiO) is an attractive anode material for next-generation lithium-ion batteries for its ultra-high theoretical capacity of 2680 mAh g^-1. The studies to date have been limited to electrodes with a relatively low mass loading (< 3.5 mg cm^-2), which has seriously restricted the areal capacity and its potential in practical devices. Maximizing areal capacity with such high-capacity materials is critical for capitalizing their potential in practical technologies. Herein, we report a monolithic three-dimensional (3D) large-sheet holey graphene framework/SiO (LHGF/SiO) composite for high-mass-loading electrode. By specifically using large-sheet holey graphene building blocks, we construct LHGF with super-elasticity and exceptional mechanical robustness, which is essential for accommodating the large volume change of SiO and ensuring the structure integrity even at ultrahigh mass loading. Additionally, the 3D porous graphene network structure in LHGF ensures excellent electron and ion transport. By systematically tailoring microstructure design, we show the LHGF/SiO anode with a mass loading of 44 mg cm^-2 delivers a high areal capacity of 35.4 mAh cm^-2 at a current of 8.8 mA cm^-2 and retains a capacity of 10.6 mAh cm^-2 at 17.6 mA cm^-2, greatly exceeding those of the state-of-the-art commercial or research devices. Furthermore, we show an LHGF/SiO anode with an ultra-high mass loading of 94 mg cm^-2 delivers an unprecedented areal capacity up to 140.8 mAh cm^-2. The achievement of such high areal capacities marks a critical step toward realizing the full potential of high-capacity alloy-type electrode materials in practical lithium-ion batteries.

Heterostructure engineering of ultrathin SnS2/Ti3C2Tx nanosheets for high-performance potassium-ion batteries

Layered metal sulfides are considered as promising candidates for potassium ion batteries (KIBs) owing to the unique interlayer passages for ion diffusion. However, the insufficient electronic conductivity, inevitable volume expansion, and sulfur loss hinder the promotion of K-ion storage performance. Herein, few-layered Ti₃C₂T_x nanosheets were selected as the multi-functional substrate for cooperating few-layered SnS₂ nanosheets, constructing SnS₂/Ti₃C₂T_x hetero-structural nanosheets (HNs) with the thickness as thin as about 5 nm. In this configuration, the formed Ti-S bonds provide robust interaction between SnS₂ and Ti₃C₂T_x nanosheets, which hinders the agglomeration of SnS₂ and the restack of Ti₃C₂T_x, endowing the hybrid material with robust nanostructure. Thus, the shortcomings of the SnS₂ anode are muchly relieved. In this way, the as-prepared SnS₂/Ti₃C₂T_x HNs electrode delivers reversible capacities of 462.1 mAh g^-1 at 0.1 A g^-1 and 166.1 mAh g^-1 at 2.0 A g^-1, respectively, and a capacity of 85.5 mAh g^-1 is remained even after 460 cycles at 2.0 A g^-1. These results are superior to those of the counterpart electrode, confirming aggressive promotion of K-ion storage performance of SnS₂ anode brought by the cooperation of Ti₃C₂T_x, and presenting a reliable strategy to improve the electrochemical performance of sulfide anodes.

Recent Advances and Perspectives of Battery-Type Anode Materials for Potassium Ion Storage

Potassium ion energy storage devices are competitive candidates for grid-scale energy storage applications owing to the abundancy and cost-effectiveness of potassium (K) resources, the low standard redox potential of K/K⁺, and the high ionic conductivity in K-salt-containing electrolytes. However, the sluggish reaction dynamics and poor structural instability of battery-type anodes caused by the insertion/extraction of large K⁺ ions inhibit the full potential of K ion energy storage systems. Extensive efforts have been devoted to the exploration of promising anode materials. This Review begins with a brief introduction of the operation principles and performance indicators of typical K ion energy storage systems and significant advances in different types of battery-type anode materials, including intercalation-, mixed surface-capacitive-/intercalation-, conversion-, alloy-, mixed conversion-/alloy-, and organic-type materials. Subsequently, host-guest relationships are discussed in correlation with the electrochemical properties, underlying mechanisms, and critical issues faced by each type of anode material concerning their implementation in K ion energy storage systems. Several promising optimization strategies to improve the K⁺ storage performance are highlighted. Finally, perspectives on future trends are provided, which are aimed at accelerating the development of K ion energy storage systems.

Nanosilver-Particles Integrated Ni3 Sn2 S2 -CoS Composite as an Advanced Electrode for High Energy Density Hybrid Cell

An ion-exchange process is a promising approach to design advanced electrode materials for high-performance energy storage devices. Herein, a nanostructured Ni₃ Sn₂ S₂ -CoS (NSS-CS) composite is fabricated by successive hydrothermal and ion-exchange processes. Since the incorporation of redox-rich cobalt element enables the NSS-CS composite to be more electrochemically active, its impact on the electrochemical performance is therefore extensively studied. Particularly, the NSS-CS-0.2 g electrode material delivered a high areal capacity of 830.4 µAh cm^-2 at 5 mA cm^-2 . Additionally, a room-temperature wet-chemical approach is employed to anchor nanosilver (nAg)-particles on the NSS-CS-0.2 g (nAg@NSS-CS-0.2 g) to further exalt its electrokinetics. Consequently, the nAg@NSS-CS-0.2 g electrode shows a higher areal capacity of 948.5 µAh cm^-2 (193.5 mAh g^-1 ) than that of the NSS-CS-0.2 g. Furthermore, its practicability is also examined by assembling a hybrid cell. The assembled hybrid cell delivers a high areal capacity of 969.2 µAh cm^-2 (49.2 mAh g^-1 ) at 7 mA cm^-2 and maximum areal energies and power densities of 0.784 mWh cm^-2 (40.8 Wh kg^-1 ) and 45 mW cm^-2 (2347.4 W kg^-1 ), respectively. The efficiency of the hybrid cells is also tested by harvesting solar energy, followed by energizing electronic components. This work can pave the way for significant attraction in designing advanced electrodes for energy-related fields.

Prospects of Electrode Materials and Electrolytes for Practical Potassium-Based Batteries

Potassium-ion batteries (PIBs) have attracted tremendous attention because of their high energy density and low-cost. As such, much effort has focused on developing electrode materials and electrolytes for PIBs at the material levels. This review begins with an overview of the high-performance electrode materials and electrolytes, and then evaluates their prospects and challenges for practical PIBs to penetrate the market. The current status of PIBs for safe operation, energy density, power density, cyclability, and sustainability is discussed and future studies for electrode materials, electrolytes, and electrode-electrolyte interfaces are identified. It is anticipated that this review will motivate research and development to fill existing gaps for practical potassium-based full batteries so that they may be commercialized in the near future.

Synergetic Advantages of Atomically Coupled 2D Inorganic and Graphene Nanosheets as Versatile Building Blocks for Diverse Functional Nanohybrids

2D nanostructured materials, including inorganic and graphene nanosheets, have evoked plenty of scientific research activity due to their intriguing properties and excellent functionalities. The complementary advantages and common 2D crystal shapes of inorganic and graphene nanosheets render their homogenous mixtures powerful building blocks for novel high-performance functional hybrid materials. The nanometer-level thickness of 2D inorganic/graphene nanosheets allows the achievement of unusually strong electronic couplings between sheets, leading to a remarkable improvement in preexisting functionalities and the creation of unexpected properties. The synergetic merits of atomically coupled 2D inorganic-graphene nanosheets are presented here in the exploration of novel heterogeneous functional materials, with an emphasis on their critical roles as hybridization building blocks, interstratified sheets, additives, substrates, and deposited monolayers. The great flexibility and controllability of the elemental compositions, defect structures, and surface natures of inorganic-graphene nanosheets provide valuable opportunities for exploring high-performance nanohybrids applicable as electrodes for supercapacitors and rechargeable batteries, electrocatalysts, photocatalysts, and water purification agents, to give some examples. An outlook on future research perspectives for the exploitation of emerging 2D nanosheet-based hybrid materials is also presented along with novel synthetic strategies to maximize the synergetic advantage of atomically mixed 2D inorganic-graphene nanosheets.

Heterostructured CoS2/CuCo2S4@N-doped carbon hollow sphere for potassium-ion batteries

Potassium ions batteries (PIBs) have been regarded as a promising choice for electrical energy storage technology due to the wide distribution of potassium resources. However, developing low-cost and robust earth-rich anode materials is still a major challenge for the practical and scalable usage of PIBs. Herein, for the first time, we developed nitrogen doped carbon coating CoS₂/CuCo₂S₄ heterostructure (CoS₂/CuCo₂S₄@NCs) hollow spheres and evaluated as anode for PIBs. The CoS₂ and CuCo₂S₄ heterostructure interface could generate a built-in electric field, which can fasten electrons transportation. The nanostructures could shorten the diffusion length of K⁺ and provide large surface area to contact with electrolytes. Furthermore, the inner hollow sphere morphology along with the carbon layer could accommodate the volume expansion during cycling. What's more, the N-doped carbon could increase the conductivity of the anodes. Benefitting from the above features, the CoS₂/CuCo₂S₄@NCs displays an outstanding rate capability (309 mAh g^-1 at 500 mA g^-1 after 250 cycles) and a long-term cycling life (112 mAh g^-1 at 1000 mA g^-1 after 1000 cycles) in ether-based electrolyte. Conversion reaction mechanism in CoS₂/CuCo₂S₄@NCs anode is also revealed through ex situ XRD characterizations. This work provides a practical direction for investigating metal sulfides as anode for PIBs.

Cell-like-carbon-micro-spheres for robust potassium anode

Large-scale low-cost synthesis methods for potassium ion battery (PIB) anodes with long cycle life and high capacity have remained challenging. Here, inspired by the structure of a biological cell, biomimetic carbon cells (BCCs) were synthesized and used as PIB anodes. The protruding carbon nanotubes across the BCC wall mimicked the ion-transporting channels present in the cell membrane, and enhanced the rate performance of PIBs. In addition, the robust carbon shell of the BCC could protect its overall structure, and the open space inside the BCC could accommodate the volume changes caused by K+ insertion, which greatly improved the stability of PIBs. For the first time, a stable solid electrolyte interphase layer is formed on the surface of amorphous carbon. Collectively, the unique structural characteristics of the BCCs resulted in PIBs that showed a high reversible capacity (302 mAh g-1 at 100 mA g-1 and 248 mAh g-1 at 500 mA g-1), excellent cycle stability (reversible capacity of 226 mAh g-1 after 2100 cycles and a continuous running time of more than 15 months at a current density of 100 mA g-1), and an excellent rate performance (160 mAh g-1 at 1 A g-1). This study represents a new strategy for boosting battery performance, and could pave the way for the next generation of battery-powered applications.

Solution-Synthesized SnSe1-xSx: Dual-Functional Materials with Enhanced Electrochemical Storage and Thermoelectric Performance

The exploration of materials with multifunctional properties, such as energy harvesting and storage, is crucial in integrated energy devices and technologies. Herein, through an organic-free "soft chemical" solution method, a series of dual-functional SnSe_1-xS_x (x = 0, 0.1, 0.2, 0.3, 0.4, and 0.5) nanoparticles have been developed toward high-performance electrochemical energy storage and thermoelectric conversion. Among the synthesized S-substituted SnSe, SnSe_0.5S_0.5 exhibits the highest rate capacity (546.1 mA h g^-1 at 2 A g^-1) and the best reversible capacity (556.2 mA h g^-1 at 0.1 A g^-1 after 100 cycles), which are much enhanced compared to those of SnSe. Density functional theory calculation confirms that the composition regulation by S substitution can lower the diffusion barrier of Li⁺, boost the diffusion rate of Li⁺, and in turn enhance the electrochemical kinetics, thus increasing the Li⁺ storage performance. Meanwhile, partially replacing Se by S decreases the lattice thermal conductivity, leading to an improved peak zT of 0.64 at 773 K in SnSe_0.9S_0.1, which is enhanced compared to the value for SnSe obtained at the same temperature. This study develops a combined composition tuning-nanostructuring approach for optimizing the electrochemical and thermoelectric performance of dual-functional SnSe.

Tremella-like Mo and N Codoped Graphitic Nanosheets by In Situ Carbonization of Phthalocyanine for Potassium-Ion Battery

A tremella-like Mo and N codoped graphitic nanosheet array supported on activated carbon (Mo₂C-MoC/AC-N) is prepared via in situ carbonization of nitrogen-rich cobalt phthalocyanine nanoparticulates anchored on activated carbon as a high-performance anode for potassium-ion batteries. The nanosheets about 5 nm thick are uniformly distributed on the surface of activated carbon for fast K-ion intercalation, and the abundant micropores in activated carbon provide additional adsorption sites of potassium ions, forming a three-dimensional architecture for potassium storage. The 3.9 atom % Mo in Mo₂C-MoC/AC-N is in the form of Mo₂C and MoC flakes (around 1:1) attached to the graphitic nanosheets. X-ray diffraction (XRD) analysis revealed that the reaction with Mo₂C (forming K₂C) happens mainly at 0.8-0.4 V, while the reaction with MoC (forming K₂C) occurs primarily at 0.4-0.01 V. The N doping (9.6 atom %) causes an interlayer spacing expansion of 0.3 Å in the graphitic nanosheets, beneficial to the potassium-ion insertion reaction to form KC₈ at 0.4-0.01 V. The Mo₂C-MoC/AC-N anode exhibits a capacity of 457.5 mA h g^-1 at a current density of 0.05 A g^-1 and an excellent capacity of 144.4 mA h g^-1 at a high current of 5 A g^-1 with a capacity loss rate of 0.49‰ per cycle.

Fast and Durable Potassium Storage Enabled by Constructing Stress-Dispersed Co3Se4 Nanocrystallites Anchored on Graphene Sheets

Transition metal dichalcogenides are regarded as promising anode materials for potassium-ion batteries (PIBs) because of their high theoretical capacities. However, due to the large atomic radius of K⁺, the structural damage caused by the huge volume expansion upon potassiation is much more severe than that of their lithium counterparts. In this research, a stress-dispersed structure with Co₃Se₄ nanocrystallites orderly anchored on graphene sheets is achieved through a two-step hydrothermal treatment to alleviate the structural deterioration. The ability to reduce the contact stress by the well-dispersed Co₃Se₄ nanocrystallites during K⁺ intercalation, together with the highly conductive graphene matrix, provides a more reliable and efficient anode architecture than its two agminated counterparts. Given these advantages, the optimized electrode delivers excellent cycling stability (301.8 mA h g^-1 after 500 cycles at 1 A g^-1), as well as an outstanding rate capacity (203.8 mA h g^-1 at 5 A g^-1). Further in situ and ex situ characterizations and density functional theory calculations elucidate the potassium storage mechanism of Co₃Se₄ during the conversion reaction and reveal the fast electrochemical kinetics of the rationally designed electrode. This work provides a practical approach for constructing stable metal-selenide anodes with long cycle life and high-rate performance for PIBs.

Yolk-shell structured CoSe2/C nanospheres as multifunctional anode materials for both full/half sodium-ion and full/half potassium-ion batteries

Transition metal selenides (TMSs) are suitable for SIBs and PIBs owing to their satisfactory theoretical capacity and superior electrical conductivity. However, the large radius of Na+/K+ easily leads to sluggish kinetics and poor conductivity, which hinder the development of SIBs and PIBs. Structure design is an effective method to solve these obstacles. In this study, Co2+ ions combined with glycerol molecules to form self-assembled nanospheres at first, and then they were in situ converted into CoSe2 nanoparticles embedded in a carbon matrix during the selenization process. This structure has three-dimensional ion diffusion channels that can effectively hamper the aggregation of metal compound nanoparticles. Meanwhile, the CoSe2/C of the yolk-shell structure and a large number of pores help alleviate volume expansion and facilitate electrolyte wettability. These structural advantages of CoSe2/C endow it with remarkable electrochemical performances for full/half SIBs and full/half PIBs. The obtained CoSe2/C exhibits superior stability and excellent performance (312.1 mA h g-1 at 4 A g-1 after 1600 cycles) for SIBs. When it is used as an anode material for PIBs, 369.2 mA h g-1 can be retained after 200 cycles at 50 mA g-1 and 248.1 mA h g-1 can be retained after 200 cycles at 500 mA g-1; in addition, CoSe2/C also shows superior rate capacity (186.4 mA h g-1 at 1000 mA g-1). A series of ex situ XRD measurements were adapted to explore the possible conversion mechanism of CoSe2/C as the anode for PIBs. It is worth noting that the full-cell of CoSe2/C//Na3V2(PO4)3@rGO for SIBs and the full-cell of CoSe2/C//PTCDA-450 for PIBs were successfully assembled. The relationship between the structure and performance of CoSe2/C was investigated through density functional theory (DFT).

State-of-the-art anodes of potassium-ion batteries: synthesis, chemistry, and applications

The growing demand for green energy has fueled the exploration of sustainable and eco-friendly energy storage systems. To date, the primary focus has been solely on the enhancement of lithium-ion battery (LIB) technologies. Recently, the increasing demand and uneven distribution of lithium resources have prompted extensive attention toward the development of other advanced battery systems. As a promising alternative to LIBs, potassium-ion batteries (KIBs) have attracted considerable interest over the past years owing to their resource abundance, low cost, and high working voltage. Capitalizing on the significant research and technological advancements of LIBs, KIBs have undergone rapid development, especially the anode component, and diverse synthesis techniques, potassiation chemistry, and energy storage applications have been systematically investigated and proposed. In this review, the necessity of exploring superior anode materials is highlighted, and representative KIB anodes as well as various structural construction approaches are summarized. Furthermore, critical issues, challenges, and perspectives of KIB anodes are meticulously organized and presented. With a strengthened understanding of the associated potassiation chemistry, the composition and microstructural modification of KIB anodes could be significantly improved.

Embedding FeS nanodots into carbon nanosheets to improve the electrochemical performance of anode in potassium ion batteries

Potassium-ion batteries (PIBs) is one of the most promising alternatives for Lithium-ion batteries (LIBs) due to the low-cost and abundant potassium reserves. However, the electrochemical performances of PIBs were seriously hindered by the larger radius of potassium ions, resulting in a slow kinetic during the electrochemical reaction, especially in the PIB anodes. In the study, we propose FeS nanodots embedded S-doped porous carbon (FeS@SPC) synthesized by a simple self-template method for the storage of potassium-ions. The FeS nanodots with an average diameter of 5 nm are uniformly distributed in S-doped porous carbon nanosheets. When the FeS@SPC was used as the anode in PIBs, the unique structure of FeS@SPC can relieve the agglomeration and volume expansion of FeS effectively during the charge-discharge process. Even after 3000 cycles, the FeS nanodots are still uniformly embedded in porous carbon without agglomeration. Ascribed to the merits, the FeS@SPC exhibits a reversible capacity of 309 mAh g^-1 at 0.1 A g^-1 after 100 cycles and 232 mAh g^-1 at 1 A g^-1 after 3000 cycles. The excellent electrochemical performance of FeS@SPC is attributed to the synergistic effects of FeS nanodots and S-doped porous carbon, which facilitated the diffusion of electrolyte and accelerated the migration of potassium ions. Moreover, theoretical calculation results also suggest that the van der waals heterostructure of FeS@SPC displays higher adsorption energy for potassium ions than that of S-doped graphene, indicating the suitability of FeS@SPC for K storage.

Core@shell and lateral heterostructures composed of SnS and NbS2

The spatial arrangement of heterostructures based on two-dimensional layered materials is important in controlling their electronic and optoelectronic properties. In this contribution, by controlling the reaction kinetics and thus the nucleation and growth sequence of p-type SnS and metallic NbS2, controllable preparation of both SnS@NbS2 core@shell and SnS/NbS2 lateral heterostructures was realized. The SnS@NbS2 core@shell heterostructures were further applied in photodetectors, and interestingly, a negative photoresponse was observed due to the Seebeck effect exerted on the NbS2 shell. Compared with the pure metallic NbS2, the SnS@NbS2 core@shell heterostructures showed a 15 times increased signal-to-noise ratio and much improved photocurrent stability, largely due to the charge and heat transfer between the SnS core and NbS2 shell.

Ultrafine ZnS Nanoparticles in the Nitrogen-Doped Carbon Matrix for Long-Life and High-Stable Potassium-Ion Batteries

Potassium-ion batteries (KIBs) have attracted researchers' widespread attention because of the luxuriant reserves of potassium salts and their low cost. Nevertheless, the absence of suitable electrode materials with a stable electrochemical property is a crucial issue, which seriously hampers the practical applications of KIBs. Herein, a scalable anode material consisting of ultrafine ZnS nanoparticles encapsulated in three-dimensional (3D) carbon nanosheets is explored for KIBs. This hierarchical anode is obtained via a simple and universal sol-gel method combined with a typical solid-phase sulfidation route. The special structure of this anode facilitates good contact with electrolytes and has enough voids to buffer the large volumetric stress changing during K⁺ insertion/extraction. Thus, the 3D ZnS@C electrode exhibitsour stable cycling performance (230 mAh g^-1 over 2300 cycles at 1.0 A g^-1) and superior rate capability. The kinetic analysis indicates that a ZnS@C anode with considerable pesoudecapactive contribution benefits a fast potassium/depotassium process. Detailed ex-situ and in-situ measurements reveal that this ZnS@C anode combines reversible conversion and alloying-type reactions. This rationally designed ZnS@C material is highly applicable for KIBs, and the current route opens an avenue for the development of highly stable K⁺ storage materials.

Recent Progress on the Alloy-Based Anode for Sodium-Ion Batteries and Potassium-Ion Batteries

High-energy batteries with low cost are urgently needed in the field of large-scale energy storage, such as grid systems and renewable energy sources. Sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs) with alloy-based anodes provide huge potential due to their earth abundance, high capacity, and suitable working potential, and are recognized as attractive alternatives for next-generation batteries system. Although some important breakthroughs have been reported, more significant improvements are still required for long lifetime and high energy density. Herein, the latest progress for alloy-based anodes for SIBs and PIBs is summarized, mainly including Sn, Sb, Ge, Bi, Si, P, and their oxides, sulfides, selenides, and phosphides. Specifically, the material designs for the desired Na⁺ /K⁺ storage performance, phase transform, ionic/electronic transport kinetics, and specific chemical interactions are discussed. Typical structural features and research strategies of alloy-based anodes, which are used to facilitate processes in battery development for SIBs and PIBs, are also summarized. The perspective of future research of SIBs and PIBs is outlined.

Hierarchical Triple-Shelled MnCo2 O4 Hollow Microspheres as High-Performance Anode Materials for Potassium-Ion Batteries

Metal oxide anode materials generally possess high theoretical capacities. However, their further development in potassium-ion batteries (KIBs) is limited by self-aggregation and large volume fluctuations during charge/discharge processes. Herein, hierarchical MnCo₂ O₄ hollow microspheres (ts-MCO HSs) with three porous shells that consist of aggregated primary nanoparticles are fabricated as anode materials of KIBs. The porous shells are in favor of reducing the diffusion path of K-ions and electrons, and thus the rate performance can be enhanced. The unique triple-shelled hollow structure is believed to provide sufficient contact between electrolyte and metal oxides, possess additional active storage sites for K-ions, and buffer the volume change during K-ions insertion/extraction. A high specific capacity of 243 mA h g^-1 at 100 mA g^-1 in the 2nd cycle and a highly improved rate performance of 153 mA h g^-1 at 1 A g^-1 are delivered when cycled between 0.01 and 3.0 V. In addition, the transformation of substances during charging/discharging processes are intuitively demonstrated by the in situ X-ray diffraction strategy for the first time, which further proves that the unique structure of ts-MCO HSs with three porous shells can significantly enhance the potassium ions storage performance.

Stimulating the Reversibility of Sb2 S3 Anode for High-Performance Potassium-Ion Batteries

Conversion-alloy sulfide materials for potassium-ion batteries (KIBs) have attracted considerable attention because of their high capacities and suitable working potentials. However, the sluggish kinetics and sulfur loss result in their rapid capacity degeneration as well as inferior rate capability. Herein, a strategy that uses the confinement and catalyzed effect of Nb₂ O₅ layers to restrict the sulfur species and facilitate them to form sulfides reversibly is proposed. Taking Sb₂ S₃ anode as an example, Sb₂ S₃ and Nb₂ O₅ are dispersed in the core and shell layers of carbon nanofibers (C NFs), respectively, constructing core@shell structure Sb₂ S₃ -C@Nb₂ O₅ -C NFs. Benefiting from the bi-functional Nb₂ O₅ layers, the electrochemical reversibility of Sb₂ S₃ is stimulated. As a result, the Sb₂ S₃ -C@Nb₂ O₅ -C NFs electrode delivers the rapidest K-ion diffusion coefficient, longest cycling stability, and most excellent rate capability among the controlled electrodes (347.5 mAh g^-1 is kept at 0.1 A g^-1 after 100 cycles, and a negligible capacity degradation (0.03% per cycle) at 2.0 A g^-1 for 2200 cycles is delivered). The enhanced K-ion storage properties are also found in SnS₂ -C@Nb₂ O₅ -C NFs electrode. Encouraged by the stimulated reversibility of Sb₂ S₃ and SnS₂ anodes, other sulfides with high electrochemical performance also could be developed for KIBs.

Three-Dimensional MOFs@MXene Aerogel Composite Derived MXene Threaded Hollow Carbon Confined CoS Nanoparticles toward Advanced Alkali-Ion Batteries

MXene combining high metal-like conductivity, high hydrophilicity, and abundant surface functional groups has been recognized as a class of versatile two-dimensional materials for many applications. However, the aggregation of MXene nanosheets from interlayer van der Waals force and hydrogen bonds represents a major problem that severely limits their practical use. Here, we report an aerogel structure of MOFs@MXene, in which the in situ formed MOF particles can effectively prevent the accumulation of MXene, enabling a three-dimensional (3D) hierarchical porous conductive network to be composed with an ultralight feature. Subsequently, a 3D porous MXene aerogel threaded hollow CoS nanobox composite ((CoS NP@NHC)@MXene) derived from the MOFs@MXene aerogel precursor was synthesized, and the highly interconnected MXene network and hierarchical porous structure coupled with the ultrafine nanocrystallization of the electrochemically active phase of CoS yield the hybrid system with excellent electron and ion transport properties. Benefiting from the synergistic effect of the components, the (CoS NP@NHC)@MXene composite manifests outstanding electrochemistry properties as electrode materials for all of the lithium-ion batteries (LIBs), sodium-ion batteries (SIBs), and potassium-ion batteries (PIBs). It demonstrated the excellent cycle stability and high capacities of 1145.9 mAh g^-1 at 1 A g^-1 after 800 cycles and 574.1 mAh g^-1 at 5 A g^-1 after 1000 cycles for LIBs, 420 mAh g^-1 at 2 A g^-1 after 650 cycles for SIBs, and 210 mAh g^-1 at 2 A g^-1 after 500 cycles for PIBs. First-principle calculations confirmed that the (CoS NP@NHC)@MXene hybrid could enhance the charge transfer reaction kinetics, particularly at the interface. More importantly, the excellent rate performance under high mass loading and the high volumetric energy and power density of the entire electrode represent the potential of (CoS NP@NHC)@MXene composites for applications to practical electrochemical energy storage devices. The synthesis method reported in this Article is versatile and can be easily extended to produce other porous MXene-aerogel-based materials for various applications.

Blowing Iron Chalcogenides into Two-Dimensional Flaky Hybrids with Superior Cyclability and Rate Capability for Potassium-Ion Batteries

Chalcogenide-based anodes are receiving increasing attention for rechargeable potassium-ion batteries (PIBs) due to their high theoretical capacities. However, they usually exhibit poor electrochemical performance due to poor structural stability, low conductivity, and severe electrolyte decomposition on the reactive surface. Herein, a method analogous to "blowing bubbles with gum" is used to confine FeS₂ and FeSe₂ in N-doped carbon for PIB anodes with ultrahigh cyclic stability and enhanced rate capability (over 5000 cycles at 2 A g^-1). Several theoretical and experimental methods are employed to understand the electrodes' performance. The density functional theory calculations showed high affinity for potassium adsorption on the FeS₂ and FeSe₂. The in situ XRD and ex situ TEM analysis confirmed the formation of several intermediate phases of the general formula K_xFeS₂. These phases have high conductivity and large interlayer distance, which promote reversible potassium insertion and facilitate the charge transfer. Also, the calculated potassium diffusion coefficient during charge/discharge further proves the enhanced kinetics. Furthermore, The FeS₂@NC anode in a full cell also exhibits high cyclic stability (88% capacity retention after 120 cycles with 99.9% Coulombic efficiency). Therefore, this work provides not only an approach to overcome several challenges in PIB anodes but also a comprehensive understanding of the mechanism and kinetics of the potassium interaction with chalcogenides.

Nano Polymorphism-Enabled Redox Electrodes for Rechargeable Batteries

Nano polymorphism (NPM), as an emerging research area in the field of energy storage, and rechargeable batteries, have attracted much attention recently. In this review, the recent progress on the composition and formation of polymorphs, and the evolution processes of different redox electrodes in rechargeable metal-ion, metal-air, and metal-sulfur batteries are highlighted. First, NPM and its significance for rechargeable batteries are discussed. Subsequently, the current NPM modulation strategies of different types of representative electrodes for their corresponding rechargeable battery applications are summarized. The goal is to demonstrate how NPM could tune the intrinsic material properties, and hence, improve their electrochemical activities for each battery type. It is expected that the analysis of polymorphism and electrochemical properties of materials could help identify some "processing-structure-properties" relationships for material design and performance enhancement. Lastly, the current research challenges and potential research directions are discussed to offer guidance and perspectives for future research on NPM engineering.

CoSe@N-Doped Carbon Nanotubes as a Potassium-Ion Battery Anode with High Initial Coulombic Efficiency and Superior Capacity Retention

Potassium-ion batteries (KIBs) have gained significant interest in recent years from the battery research community because potassium is an earth-abundant and redox-active metal, thus having the potential to replace lithium-ion batteries for sustainable energy storage. However, the current development of KIBs is critically challenged by the lack of competitive electrode materials that can reversibly store large amounts of K⁺ and electrolyte systems that are compatible with the electrode materials. Here, we report that cobalt monochalcogenide (CoSe) nanoparticles confined in N-doped carbon nanotubes (CoSe@NCNTs) can be used as a K⁺-storing electrode. The CoSe@NCNT composite exhibits a high initial Columbic efficiency (95%), decent capacity (435 mAh g^-1 at 0.1 A g^-1), and stability (282 mAh g^-1 2.0 A g^-1 after 500 cycles) in a 1 M KPF₆-DME electrolyte with K as the anode over the voltage range from 0.01 to 3.0 V. A full KIB cell consisting of this anode and a Prussian blue cathode also shows excellent electrochemical performance (228 mAh g^-1 at 0.5 A g^-1 after 200 cycles). We show that the NCNT shell is effective not only in providing high electronic conductivity for fast charge transfer but also in accommodating the volume changes during cycling. We also provide experimental and theoretical evidence that KPF₆ in the electrolyte plays a catalytic role in promoting the formation of a polymer-like film on the CoSe surface during the initial activation process, and this amorphous film is of critical importance in preventing the dissolution of polyselenide intermediates into the electrolyte, stabilizing the Co⁰/K₂Se interface, and realizing the reversibility of Co⁰/K₂Se conversion.

Co9S8@carbon nanofiber as the high-performance anode for potassium-ion storage

Thanks to their intrinsic merits of low cost and natural abundance, potassium-ion batteries have drawn intense interest and are regarded as a possible replacement for lithium-ion batteries. The larger radius of potassium, however, provides slow mobility, which normally leads to sluggish diffusion of host materials and eventual expansion of volume, typically resulting in electrode failure. To address these issues, we design and synthesize an effective micro-structure with Co₉S₈ nanoparticles segregated in carbon fiber utilizing a concise electrospinning process. The anode delivers a high K⁺ storage capacity of 721 mA h g⁻¹ at 0.1 A g⁻¹ and a remarkable rate performance of 360 mA h g⁻¹ at a high current density of 3 A g⁻¹. A small charge-transfer resistance and a high pseudocapacitive contribution that benefit fast potassium ion migration are indicated by quantitative analysis. The outstanding electrochemical performance can be attributed to the distinct architecture design facilitating high active electrode–electrolyte area and fast kinetics as well as controlled volume expansion.

Co₉S₈@carbon nanofibers with boosted highly active electrode–electrolyte area, fast kinetics and controlled volume expansion show an excellent cycling and rate performance in potassium ion batteries.

Scalable One-Pot Synthesis of Hierarchical Bi@C Bulk with Superior Lithium-Ion Storage Performances

Lithium-ion batteries (LIBs), the most successful commercial energy storage devices, are now widespread in our daily life. However, the lack of appropriate electrode materials with long lifespan and superior rate capability is the urgent bottleneck for the development of high-performance LIBs. Herein, a hierarchical Bi@C bulk is developed via a scalable pyrolysis method. Due to the ultrafine size of Bi nanoparticles and in situ generated porous carbon framework, this Bi@C anode evidently facilitates the diffusion of Li⁺/electron, availably inhibits the agglomeration of active nano-Bi, and effectively mitigates the volume fluctuation. This hierarchical Bi@C bulk exhibits stable cycling performance for both LIBs (256 mAh g^-1 at 1.0 A g^-1 over 1400 cycles) and potassium-ion batteries (271 mAh g^-1 at 0.1 A g^-1 for 200 cycles). More importantly, when coupled with a commercial LiCoO₂ cathode, the assembled LiCoO₂//Bi@C cells provide an output voltage of 2.9 V and retain a capacity of 202 mAh g^-1 at 0.15 A g^-1. Moreover, kinetic analysis and in situ X-ray diffraction characterization reveal that the Bi@C anode displays a dominated pseudocapacitance behavior and a typical alloying storage mechanism during the cycling process.

Structural Engineering of SnS2 Encapsulated in Carbon Nanoboxes for High-Performance Sodium/Potassium-Ion Batteries Anodes

Conversion-alloying type anode materials like metal sulfides draw great attention due to their considerable theoretical capacity for sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs). However, poor conductivity, severe volume change, and harmful aggregation of the material during charge/discharge lead to unsatisfying electrochemical performance. Herein, a facile and green strategy for yolk-shell structure based on the principle of metal evaporation is proposed. SnS₂ nanoparticle is encapsulated in nitrogen-doped hollow carbon nanobox (SnS₂ @C). The carbon nanoboxes accommodate the volume change and aggregation of SnS₂ during cycling, and form 3D continuous conductive carbon matrix by close contact. The well-designed structure benefits greatly in conductivity and structural stability of the material. As expected, SnS₂ @C exhibits considerable capacity, superior cycling stability, and excellent rate capability in both SIBs and PIBs. Additionally, in situ Raman technology is unprecedentedly conducted to investigate the phase evolution of polysulfides. This work provides an avenue for facilely constructing stable and high-capacity metal dichalcogenide based anodes materials with optimized structure engineering. The proposed in-depth electrochemical measurements coupled with in situ and ex situ characterizations will provide fundamental understandings for the storage mechanism of metal dichalcogenides.