Defect-Enriched Nitrogen Doped-Graphene Quantum Dots Engineered NiCo2 S4 Nanoarray as High-Efficiency Bifunctional Catalyst for Flexible Zn-Air Battery

Boosting oxygen reduction durability by embedding Co9S8 nanoparticles into Co single atoms anchored porous carbon frameworks

Developing an efficient and low-cost oxygen reduction electrocatalyst is essential for the application of aqueous zinc-air batteries (ZABs). Herein, we report a facile adsorption-confined pyrolysis strategy to fabricate the hybrid electrocatalyst (denoted as Co9S8/CoSA-PC) by embedding Co9S8 nanoparticles into Co single atoms (Co-SAs) anchored porous carbon sheets for boosting oxygen reduction reaction (ORR) durability. In this strategy, the Co2+ ions are first absorbed into oxygen-rich porous carbon nanosheets and further form the Co-SAs with the help of thiourea in the following pyrolysis procedure, which is believed to be able to confine the generated Co9S8 nanoparticles into carbon frameworks due to their interface interaction. Benefiting from the synergistic effect of different components, the obtained Co9S8/CoSA-PC electrocatalyst for ORR exhibits outstanding catalytic activity with a half-wave potential of 0.82 V and a distinguished long-term durability with a current retention of 80 % after cycling 80 h under alkaline conditions, which is superior to commercial Pt/C. Moreover, the assembled ZABs with Co9S8/CoSA-PC as cathodic catalyst deliver a high specific capacity of 764 mAh gZn-1 at 10 mA cm-2 and the outstanding peak power density of up to 221.4 mW cm-2. This work provides a novel structure design strategy to prepare transition metal sulfide-based electrocatalysts with superior durability for ORR.

Promoting the four electrocatalytic reactions of OER/ORR/HER/MOR using a multi-component metal sulfide heterostructure for zinc-air batteries and water-splitting

Multi-component metal sulfide heterostructures are promising for multi-functional catalytic activities. In this work, we fabricated a multi-component metal sulfide heterostructure (Co-S-INF, composed of Co3S4 and (Fe, Ni)9S8) with nanoflower morphology clustered with numerous nanosheets by the electrodeposition of cobalt on iron-nickel foam followed by hydrothermal sulfurization treatment. Co-S-INF possesses high multi-functional electrocatalytic properties toward the oxygen evolution reaction (OER), oxygen reduction reaction (ORR), hydrogen evolution reaction (HER), and methanol oxidation reaction (MOR). In particular, the ORR potential at 10 mA cm-2 is 0.682 V, and the OER, HER, and MOR potentials at 100 mA cm-2 are 1.478 V, 0.289 V, and 1.417 V, respectively. By using Co-S-INF, the aqueous ZAB with an ultrahigh peak power density of 332.30 mW cm-2 and an overall water splitting (OWS) device with a low splitting voltage of 1.82 V at 100 mA cm-2 can be obtained. In addition, the OWS potential can be further decreased to 1.70 V at a current density of 100 mA cm-2 with the assistance of MOR at the anode accompanying the production of the high value-added formate. Our work opens the way for the application and development of multi-functional electrocatalysts.

Hetero-Anionic Structure Activated CoS Bonds Promote Oxygen Electrocatalytic Activity for High-Efficiency Zinc-Air Batteries

The electronic structure of transition metal complexes can be modulated by replacing partial ion of complexes to obtain tuned intrinsic oxygen reduction reaction (ORR) or oxygen evolution reaction (OER) electrocatalytic activity. However, the anion-modulated transition metal complexes ORR activity of is still unsatisfactory, and the construction of hetero-anionic structure remains challenging. Herein, an atomic doping strategy is presented to prepare the CuCo2 O4-x Sx /NC-2 (CCSO/NC-2) as electrocatalysts, the structrual characterization results favorably demonstrate the partial substitution of S atoms for O in CCSO/NC-2, which shows excellent catalytic performance and durability for OER and ORR in 0.1 m KOH. In addition, the catalyst assembled Zinc-air battery with an open circuit potential of 1.43 V maintains performance after 300 h of cyclic stability. Theoretical calculations and differential charges illustrate that S doping optimizes the reaction kinetics and promotes electron redistribution. The superior performance of CCSO/NC-2 catalysis is mainly due to its unique S modulation of the electronic structure of the main body. The introduction of S promotes CoO covalency and constructs a fast electron transport channel, thus optimizing the adsorption degree of active site Co to the reaction intermediates.

Bioinspired Hydrophobicity Coupled with Single Fe-N4 Sites Promotes Oxygen Diffusion for Efficient Zinc-Air Batteries

The poor oxygen diffusion and sluggish oxygen reduction reaction (ORR) kinetics at multiphase interfaces in the cathode suppress the practical application of zinc-air batteries. Developing effective strategies to tackle the issue is of great significance for overcoming the performance bottleneck but remains challenging. Here, a multiscale hydrophobic surface is designed on the iron single-atom catalyst via a gas-phase fluorination-assisted method inspired by the structure of gas-trapping mastoids on lotus leaves. The hydrophobic Fe-FNC attains a higher peak power density of up to 226 mW cm^-2 , a long durability of up close to 140 h, and better cyclic durability of up to 300 cycles compared to the corresponding Pt/C-based Zn-air battery. Experiments and theoretical calculations indicate that the formed more triple-phase interfaces and exposed isolated Fe-N₄ sites are proposed as the governing factors in boosting electrocatalytic ORR activity and remarkable cycling durability for Zn-air batteries.

Flexible Solid-State Metal-Air Batteries: The Booming of Portable Energy Supplies

The rapid development of portable and wearable electronics has given rise to new challenges and provoked research in flexible, lightweight, and affordable energy storage devices. Flexible solid-state metal-air batteries (FSSMABs) are considered promising candidates, owing to their large energy density, mechanical flexibility, and durability. However, the practical applications of FSSMABs require further improvement to meet the demands of long-term stability, high power density, and large operating voltage. This Review presents a detailed discussion of innovative electrocatalysts for the air cathode, followed by a sequential overview of high-performance solid-state electrolytes and metal anodes, and a summary of the current challenges and future perspectives of FSSMABs to promote practical application and large-scale commercialization in the near future.

Graphene quantum dots: A comprehensive overview

Because of their prospective applications and exceptional features, graphene quantum dots (GQDs) have gotten a lot of recognition as a new class of fluorescent carbon materials. One of the carbon family’s newest superstars is the GQD. Due to its exceptional optoelectrical qualities, it has sparked a lot of curiosity since its debut in 2008. Two of the most important traits are a band gap that is not zero, biocompatibility, and highly changeable characteristics. GQDs have several important characteristics. GQDs have shown potential in a variety of fields, for instance, catalysis, sensing, energy devices, drug delivery, bioimaging, photothermal, and photodynamic therapy. Because this area constantly evolves, it is vital to recognize emerging GQD concerns in the current breakthroughs, primarily since some specific uses and developments in the case of GQDs synthesis have not been thoroughly investigated through previous studies. The current results in the properties, synthesis, as well as benefits of GQDs are discussed in this review study. As per the findings of this research, the GQD’s future investigation is boundless, mainly if the approaching investigation focuses on purifying simplicity and environmentally friendly synthesis, as well as boosting photoluminescence quantum output and manufacturing output of GQDs.

Construction of 3D Hierarchical Co3O4@CoFe-LDH Heterostructures with Effective Interfacial Charge Redistribution for Rechargeable Liquid/Solid Zn-Air Batteries

Constructing three-dimensional (3D) hierarchical heterostructures is an appealing but challenging strategy to improve the performance of catalysts for electrical energy devices. Here, an efficient and robust flexible self-supporting catalyst, interface coupling of ultrathin CoFe-LDH nanosheets and Co₃O₄ nanowire arrays on the carbon cloth (CC/Co₃O₄@CoFe-LDH), was proposed for boosting oxygen evolution reaction (OER) in rechargeable liquid/solid Zn-air batteries (ZABs). The strong interfacial interaction between the CoFe-LDH and Co₃O₄ heterostructures stimulated the charge redistribution in their coupling regions, which improved the electron conductivity and optimized the adsorption free energy of OER intermediates, ultimately boosting the intrinsic OER performance. Besides, the 3D hierarchical nanoarray structure facilitated the exposure of catalytically active centers and rapid electron/mass transfer during the OER process. As such, the CC/Co₃O₄@CoFe-LDH catalyst achieved excellent OER catalytic activity in alkaline medium, with a small overpotential of 237 mV at 10 mA cm^-2, a low Tafel slope of 35.43 mV dec^-1, and long-term durability of up to 48 h, significantly outperforming the commercial RuO₂ catalyst. More impressively, the liquid and flexible solid-state ZABs assembled by the CC/Co₃O₄@CoFe-LDH hybrid catalyst as the OER catalyst presented a stable open circuit voltage, large power density, superb cycling life, and satisfactory flexibility, indicating great potential applications in energy technology. This work provides a good guidance for the development of advanced electrocatalysts with heterostructures and an in-depth understanding of electronic modulation at the heterogeneous interface.

Bimetallic Organic Framework-Decorated Leaf-like 2D Nanosheets as Flexible Air Cathode for Rechargeable Zn-air Batteries

Exploring highly active and robust self-supporting air electrodes is the key for flexible Zn-air batteries (FZABs). Therefore, we report a novel 3D structural bimetal-based self-supporting electrode consisting of hybrid Cu, Co nanoparticles co-modified nitrogen-doped carbon nanosheets on carbon cloth (Cu, Co NPs@NCNSs/CC), which displays excellent electrochemical activity and durability of the oxygen reduction/evolution reaction (ORR/OER). The Cu, Co NPs@NCNSs/CC exhibits a half-wave potential of 0.863 V toward ORR and an overpotential of 225 mV at 10 mA cm^-2 toward OER, owing to its exposed bimetallic sites accelerating the kinetic reaction. In addition, the density functional theory calculation proves that the synergistic effect of CuCo sites favors ORR and OER. Hence, the FZABs based on Cu, Co NPs@NCNSs/CC achieve a larger open-circuit potential (1.45 V), higher energy density (130.10 mW cm^-2 ), and outstanding cycling stability. All remarkable results demonstrate valuable enlightenment for seeking advanced energy materials of portable and wearable electronics.

Hydrophobization Engineering of the Air-Cathode Catalyst for Improved Oxygen Diffusion towards Efficient Zinc-Air Batteries

Poor oxygen diffusion at multiphase interfaces in an air cathode suppresses the energy densities of zinc-air batteries (ZABs). Developing effective strategies to tackle the issue is of great significance for overcoming the performance bottleneck. Herein, inspired by the bionics of diving flies, a polytetrafluoroethylene layer was coated on the surfaces of Co₃ O₄ nanosheets (NSs) grown on carbon cloth (CC) to create a hydrophobic surface to enable the formation of more three-phase reaction interfaces and promoted oxygen diffusion, rendering the hydrophobic-Co₃ O₄ NSs/CC electrode a higher limiting current density (214 mA cm^-2 at 0.3 V) than that (10 mA cm^-2 ) of untreated-Co₃ O₄ NSs/CC electrode. Consequently, the assembled ZAB employing hydrophobic-Co₃ O₄ NSs/CC cathode acquired a higher power density (171 mW cm^-2 ) than that (102 mW cm^-2 ) utilizing untreated-Co₃ O₄ NSs/CC cathode, proving the enhanced interfacial reaction kinetics on air cathode benefiting from the hydrophobization engineering.

Electronic Regulation of ZnCo Dual-Atomic Active Sites Entrapped in 1D@2D Hierarchical N-Doped Carbon for Efficient Synergistic Catalysis of Oxygen Reduction in Zn-Air Battery

Transition metal-based nitrogen-doped carbon (M-N_x -C) is considered as a promising catalyst for the oxygen reduction reaction (ORR) in clean energy storage and conversion devices. Herein, ZnCo dual-atomic sites are incorporated in hierarchical N-doped carbon (HNC), with 1D nanotubes wrapped in 2D nanosheets structure (termed as 1D@2D ZnCo-HNC), via a one-step bio-inspired pyrolysis. The feeding ratio of Zn to Co precursor and pyrolytic temperature are critically modulated to achieve well-defined morphologies of the products, endowing them with the integrated merits of nanotubes and nanosheets as efficient ORR catalysts. Benefiting from the particular structure and electronic regulation of Zn on Co, the ZnCo-N_x dual-atomic system exhibits excellent ORR catalytic characteristics with an onset potential of 1.05 V and a half-wave potential of 0.82 V. Density functional theory calculations further explain the regulating role of Zn, such that the adjusted Co in ZnCo-N_x sites significantly reduces the energy cost to ultimately facilitate the ORR. Moreover, the Zn-air battery assembled with ZnCo-HNC is capable of delivering the maximum power density of 123.7 mW cm^-2 and robust stability for 110 h (330 cycles). This method provides a promising strategy for fabricating efficient transition metal-based carbon catalysts for green energy devices.

Multi-Strategy Architecture of High-Efficiency Electrocatalysts for Underwater Zn-H2 O2 Batteries with Superior Power Density of 442 mW cm-2

A facile multistage regulated strategy is reported to synthesize ZnCo-NC based carbon nanotubes including DMEA induced crystallization, Zn ion activation, and magnetic control growth of carbon nanotubes. Uniform Co distribution and the modulation of Zn, and their catalytic properties are carefully investigated by X-ray absorption spectroscopy and X-ray photoelectron spectroscopy. The surface contents of pyridinic N for the oxygen-reduction reaction (ORR) and the surface contents of CoN_x and high valence Co for the oxygen-evolution reaction (OER) can be significantly modulated by Zn content in precursors and the sintering temperature. Furthermore, the catalyst also contains high specific surface areas, high porosity, and high electrochemical active surfaces. Therefore, the ZnCo-NC based catalyst exhibits outstanding bifunctional electrocatalytic activities for ORR with a high E_onset (1.02 V) and E_1/2 (0.91 V) and OER with low E_j=10 (1.56 V), better than Pt/C and RuO₂ . Importantly, the ZnCo-NC based Zn-H₂ O₂ batteries achieve the superior power density of 442 mW cm^-2 , much higher than 238 and 198 mW cm^-2 of Zn-air batteries with ZnCo-NC based catalyst and Pt/C respectively. More importantly, the high-power Zn-H₂ O₂ batteries can work well in underwater conditions while Zn-air batteries are out of work.

Advances in preparation, mechanism and applications of graphene quantum dots/semiconductor composite photocatalysts: A review

Due to the low efficiency of single-component nano materials, there are more and more studies on high-efficiency composites. As zero dimensional (0D) non-metallic semiconductor material, the emergence of graphene quantum dots (GQDs) overcomes the shortcomings of traditional photocatalysts (rapid rate of electron-hole recombination and narrow range of optical response). Their uniqueness is that they can combine the advantages of quantum dots (rich functional groups at edge) and sp² carbon materials (large specific surface area). The inherent inert carbon stabilizes chemical and physical properties, and brings new breakthroughs to the development of benchmark photocatalysts. The photocatalytic efficiency of GQDs composite with semiconductor materials (SCs) can be improved by the following three points: (1) accelerating charge transfer, (2) extending light absorption range, (3) increasing active sites. The methods of preparation (bottom-up and top-down), types of heterojunctions, mechanisms of photocatalysis, and applications of GQDs/SCs (wastewater treatment, energy storage, gas sensing, UV detection, antibiosis and biomedicine) are comprehensively discussed. And it is hoped that this review can provide some guidance for the future research on of GQDs/SCs on photocatalysis.

Synthesis, Applications, and Prospects of Graphene Quantum Dots: A Comprehensive Review

Graphene quantum dot (GQD) is one of the youngest superstars of the carbon family. Since its emergence in 2008, GQD has attracted a great deal of attention due to its unique optoelectrical properties. Non-zero bandgap, the ability to accommodate functional groups and dopants, excellent dispersibility, highly tunable properties, and biocompatibility are among the most important characteristics of GQDs. To date, GQDs have displayed significant momentum in numerous fields such as energy devices, catalysis, sensing, photodynamic and photothermal therapy, drug delivery, and bioimaging. As this field is rapidly evolving, there is a strong need to identify the emerging challenges of GQDs in recent advances, mainly because some novel applications and numerous innovations on the ease of synthesis of GQDs are not systematically reviewed in earlier studies. This feature article provides a comparative and balanced discussion of recent advances in synthesis, properties, and applications of GQDs. Besides, current challenges and future prospects of these emerging carbon-based nanomaterials are also highlighted. The outlook provided in this review points out that the future of GQD research is boundless, particularly if upcoming studies focus on the ease of purification and eco-friendly synthesis along with improving the photoluminescence quantum yield and production yield of GQDs.

Recent Advances in Flexible Zn-Air Batteries: Materials for Electrodes and Electrolytes

Flexible Zn-air batteries (ZABs) draw much attention due to the merits of high energy density, stability, and safety, and show potential applications for wearable devices. However, the development of flexible ZABs with great energy density, high round-trip efficiency, and long cycle life for practical applications is highly restricted by the lack of highly active oxygen catalysts, high ion-conducting solid-state electrolytes, appropriate Zn anodes, and advanced battery configuration. Promising oxygen catalysts should possess both, superior oxygen reduction reaction and oxygen evolution reaction performance and can be directly used as self-supporting cathodes without loading catalysts on support materials such as carbon cloth. In addition, electrolytes play an important role in ZABs; a good electrolyte should be in all-solid state with high ion conductivity. Moreover, for an excellent Zn anode, it is required to stably contact the electrolyte interface during the bending process. Therefore, in this review, recent advances in ZABs are summarized, including: i) the powder and 3D self-supporting oxygen catalysts, ii) the species of solid-state electrolytes, and iii) the rational design of Zn anodes. Finally, the challenges and opportunities of this promising field are presented.

Amorphous materials for elementary-gas-involved electrocatalysis: an overview

Given the critical demands on energy conversion, storage, and transportation, tremendous interest has been devoted to the field of material development related to energy harvesting, recently. As the only route towards energy utilization, the carriers with the characteristics of low carbon are regarded as the future choice, e.g., hydrogen and ammonia. To this end, electrocatalysis provides a green way to access these substances. However, the unfulfilled conversion efficiency is the bottleneck for practical application. In this review, the promising characteristics of amorphous materials and the amorphous-induced electrocatalytic enhancement (AIEE) were emphasized. In the beginning, the characteristics of amorphous materials are briefly summarized. The basic mechanism of heterogeneous electrocatalytic reactions is illustrated, including the hydrogen/oxygen evolution and oxygen/nitrogen reduction. In the third part, the electrocatalytic performance of amorphous materials is discussed in detail, and the mechanism of AIEE is highlighted. In the last section of this review, the challenges and outlook for the development of amorphous enhanced electrocatalysis are presented.

Coordination regulated pyrolysis synthesis of ultrafine FeNi/(FeNi)9S8 nanoclusters/nitrogen, sulfur-codoped graphitic carbon nanosheets as efficient bifunctional oxygen electrocatalysts

Design of advanced carbon nanomaterials with high-efficiency oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) activities is still imperative yet challenging for searching green and renewable energies. Herein, we synthesized ultrafine FeNi/(FeNi)₉S₈ nanoclusters encapsulated in nitrogen, sulfur-codoped graphitic carbon nanosheets (FeNi/(FeNi)₉S₈/N,S-CNS) by coordination regulated pyrolyzing the mixture of the metal precursors, dithizone and g-C₃N₄ at 800 °C. The as-prepared FeNi/(FeNi)₉S₈/N,S-CNS exhibited distinct electrocatalytic activity and stability for the ORR with positive onset (E_onset) and half-wave (E_1/2) potentials (E_onset = 0.97 V; E_1/2 = 0.86 V) and OER with the small overpotential (η = 283 mV) at 10 mA cm^-2 in the alkaline media, outperforming commercial Pt/C and RuO₂ catalysts. This research provides some constructive guidelines for preparing efficient, low-cost and stable nanocatalysts for electrochemical energy devices.

Structural Modulation on NiCo2 S4 Nanoarray by N Doping to Enhance 2e-ORR Selectivity for Photothermal AOPs and Zn-O2 Batteries*

As a H₂ O₂ generator, a 2e^- oxygen reduction reaction active electrocatalyst plays an important role in the advanced oxidation process to degrade organic pollutants in sewage. To enhance the tendency of NiCo₂ S₄ towards the 2e^- reduction reaction, N atoms are doped in its structure and replace S^2- . The result implies that this weakens the interaction between NiCo₂ S₄ and OOH*, suppresses O-O bond breaking and enhances H₂ O₂ selectivity. This electrocatalyst also shows photothermal effect. Under photothermal heating, H₂ O₂ produced by the oxidation reduction reaction can decompose and releaseOH, which degrades organic pollutants through the advanced oxidation process. Photothermal effect induced by the advance oxidation process shows obvious advantages over the traditional Fenton reaction, such as wide pH adaptation scope and low secondary pollutant due to its Fe²⁺ free character. With Zn as anode and the electrocatalyst as cathode material, a Zn-O₂ battery is assembled. It achieves electricity generation and photothermal effect induced by the advance oxidation process simultaneously.

Structure and Interface Modification of Carbon Dots for Electrochemical Energy Application

Carbon dots (CDs) as new nanomaterials have attracted much attention in recent years due to their unique characteristics. Notably, structure and interface modification (carbon core, edge, defects, and functional groups) of CDs have been considered as valid methods to regulate their properties, which contain electron transfer effect, electrochemical activity, fluorescence luminescent, and so on. Additionally, CDs with ultrasmall size, excellent dispersibility, high specific surface area, and abundant functional groups can guarantee positive and extraordinary effects in electrical energy storage and conversion. Therefore, CDs are used to couple with other materials by constructing a special interface structure to enhance their properties. Here, diverse structural and interfacial modifications of CDs with various heteroatoms and synergy effects are systematically analyzed. And not only several main syntheses of CDs-based composites (CDs/X) are summarized but also the merit and demerit of CDs/X in electrical energy storage are discussed. Finally, the applications of CDs/X in energy storage devices (supercapacitors, batteries) and electrocatalysts for practical applications are discussed. This review mainly provides a comprehensive summary and future prospect for synthesis, modification, and electrochemical applications of CDs.

Fe-Ni Alloy Nanoclusters Anchored on Carbon Aerogels as High-Efficiency Oxygen Electrocatalysts in Rechargeable Zn-Air Batteries

In this work, Fe-Ni alloy nanoclusters (Fe-Ni ANCs) anchored on N, S co-doped carbon aerogel (Fe-Ni ANC@NSCA catalysts) are successfully prepared by the optimal pyrolysis of polyaniline (PANI) aerogels derived from the freeze-drying of PANI hydrogel obtained by the polymerization of aniline monomers in the co-presence of tannic acid (TA), Fe³⁺ , and Ni²⁺ ions. In addition, the optimal molar ratio of the TA, Fe³⁺ , and Ni²⁺ ions for synthesis of Fe-Ni ANC@NSCA catalysts are 1:2:5, which can guarantee the formation of carbon aerogel composed of quasi-2D porous carbon sheets and the formation of high-density Fe-Ni ANCs with an ultrasmall size between 2 to 2.8 nm. These Fe-Ni ANCs consisting of N₄ -Fe-O-Ni-N₄ moiety are proposed as a new type of active species for the first time, to the best of the authors' knowledge. Thanks to their unique features, the Fe-Ni ANC@NSCA catalysts show excellent performance in oxygen reduction reaction with a half-wave potential (E_1/2 ) of 0.891 V and oxygen evolution reaction (260 mV @ 10 mA cm^-2 ) in alkaline media as bifunctional catalysts, which are better than the state-of-the-art commercial Pt/C catalysts and RuO₂ catalysts. Moreover, Zn-air battery assembled with the Fe-Ni ANC@NSCA catalysts also shows a remarkable performance and exceptionally high stability over 500 h at 5 mA cm^-2 .

Hierarchical urchin-like amorphous carbon with Co-adding anchored on nickel foam: A free-standing electrode for advanced asymmetrical supercapacitors and adsorbed Pb (II)

The booming development of carbon materials is of great value for diverse applications, owing to their superior electron conductivity, unique structures, and excellent cycle lifetime. This study presents two hierarchically structured amorphous carbon materials for asymmetric supercapacitor (ASC) device: i) the MOFs-derived urchin-like amorphous carbon anchored on nickel foam (UAC@NF) as positive electrode; ii) high temperature activated graphite carbon felt (GF500) as negative electrode. This ASC device achieves a higher energy density of 0.036 mWh cm^-3 at a power density of 0.984 mW cm^-3 and demonstrates better cycling performance with 91.4% capacitance retention after 10,000 cycles, compared with the other carbon-based supercapacitor. In addition, the UAC@NF after 10,000 cycles displays much better adsorption performance for Pb (II) compared with the unused UAC@NF. We have demonstrated the relationship between carbon materials' structure and performance by combining experiment and theoretical calculation. Predominantly, our work can provide a new direction for the common development of amorphous carbon materials in the field of energy and environment.

A trifecta of g-C3N4: enhanced visible-spectrum absorption, increased structural distortion and boosted electronic-transfer dynamics

Porous spheres of graphitic carbon nitride (CN) with N-doped carbon species (CNNC) were synthesized under mild conditions by calcining a melamine-cyanic acid precursor containing a certain amount of PVP. Introduction of N-doped carbon led to enhancement of visible-spectrum utilization and greater distortion of the plane of g-C3N4. These actions greatly improved the separation efficiency of photogenerated electrons-holes pairs. The photocatalytic hydrogen evolution (PHE) performance was 7.5-fold higher than that of CN and 2.2-fold that of the sample without plane distortion (CNNC-U). As bifunctional photocatalysts, the photoelectrons were applied to reduce water to hydrogen, whereas the holes were used for benzaldehyde production by oxidation of benzyl alcohol. The rates of PHE and benzaldehyde production for CNNC-0.1 could reach ∼3.12-fold and ∼3.17-fold higher than that for CN, respectively. This work provides a new strategy to enhance visible-spectrum absorption and manipulation of layer structures to boost electronic-transfer dynamics.

Linker Defects Triggering Boosted Oxygen Reduction Activity of Co/Zn-ZIF Nanosheet Arrays for Rechargeable Zn-Air batteries

The poor electronic conductivity and low intrinsically electrocatalytic activity of most metal-organic frameworks (MOFs) greatly limit their direct applications as oxygen reduction reaction (ORR) electrocatalysts. In this work, it is reported that introduction of linker defects can effectively trigger the ORR activity of leaf-shaped zeolitic imidazolate framework (ZIF) by increasing the intrinsic activity of metal sites and electrical conductivity. Experimental results show that part of imidazole molecules is successfully removed from ZIF after a low-temperature thermal treatment without destroying its structure integrity, resulting in the formation of unsaturated metal sites and faster electron transport rate. Consequently, the ZIF with imidazole molecules defects (D-ZIF) exhibits a superior ORR activity than the pristine ZIF, possessing an onset potential of 0.86 V and higher half-wave potential of 0.60 V. Furthermore, the home-made Zn-air batteries with D-ZIF as air cathode exhibit high open-circuit voltage and well cycling stability. The developed linker-deficient modulation strategy can provide a new prospect to enable MOF-based electrocatalysts with efficient catalytic activity.

Nitrogen-Doped Cobalt Pyrite Yolk-Shell Hollow Spheres for Long-Life Rechargeable Zn-Air Batteries

Limited by the sluggish four-electron transfer process, designing high-performance nonprecious electrocatalysts for the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) is urgently desired for efficient rechargeable Zn-air batteries (ZABs). Herein, the successful synthesis of porous nitrogen-doped cobalt pyrite yolk-shell nanospheres (N-CoS2 YSSs) is reported. Benefiting from the abundant porosity of the porous yolk-shell structure and unique electronic properties by nitrogen doping, the as-prepared N-CoS2 YSSs possess more exposed active surface, thus giving rise to superior activity for reversible oxygen electrocatalysis and outstanding cycling stability (more than 165 h at 10 mA cm-2) in ZABs, exceeding the commercial Pt/C and RuO2 hybrid catalysts. Moreover, the assembled ZABs, delivering a specific capacity of 640 mAh gZn -1, can be used for practical devices. This work provides a novel tactic to engineer sulfides as high efficiency and promising bifunctional oxygen electrocatalysts for advanced metal-air batteries.

Interface Engineering of CoS/CoO@N-Doped Graphene Nanocomposite for High-Performance Rechargeable Zn-Air Batteries

Low cost and green fabrication of high-performance electrocatalysts with earth-abundant resources for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are crucial for the large-scale application of rechargeable Zn-air batteries (ZABs). In this work, our density functional theory calculations on the electrocatalyst suggest that the rational construction of interfacial structure can induce local charge redistribution, improve the electronic conductivity and enhance the catalyst stability. In order to realize such a structure, we spatially immobilize heterogeneous CoS/CoO nanocrystals onto N-doped graphene to synthesize a bifunctional electrocatalyst (CoS/CoO@NGNs). The optimization of the composition, interfacial structure and conductivity of the electrocatalyst is conducted to achieve bifunctional catalytic activity and deliver outstanding efficiency and stability for both ORR and OER. The aqueous ZAB with the as-prepared CoS/CoO@NGNs cathode displays a high maximum power density of 137.8 mW cm^-2, a specific capacity of 723.9 mAh g^-1 and excellent cycling stability (continuous operating for 100 h) with a high round-trip efficiency. In addition, the assembled quasi-solid-state ZAB also exhibits outstanding mechanical flexibility besides high battery performances, showing great potential for applications in flexible and wearable electronic devices.

Integrated and Binder-Free Air Cathodes of Co3 Fe7 Nanoalloy and Co5.47 N Encapsulated in Nitrogen-Doped Carbon Foam with Superior Oxygen Reduction Activity in Flexible Aluminum-Air Batteries

All-solid-sate Al-air batteries with features of high theoretical energy density, low cost, and environmental-friendliness are promising as power sources for next-generation flexible and wearable electronics. However, the sluggish oxygen reduction reaction (ORR) and poor interfacial contact in air cathodes cause unsatisfied performance. Herein, a free-standing Co₃ Fe₇ nanoalloy and Co_5.47 N encapsulated in 3D nitrogen-doped carbon foam (Co₃ Fe₇ @Co_5.47 N/NCF) is prepared as an additive-free and integrated air cathode for flexible Al-air batteries in both alkaline and neutral electrolytes. The Co₃ Fe₇ @Co_5.47 N/NCF outperforms commercial platinum/carbon (Pt/C) toward ORR with an onset potential of 1.02 V and a positive half-wave potential of 0.92 V in an alkaline electrolyte (0.59 V in sodium chloride solution), which is ascribed to the unique interfacial structure between Co₃ Fe₇ and Co_5.47 N supported by 3D N-doped carbon foam to facilitate fast electron and mass transfer. The high ORR performance is also supported by in-situ electrochemical Raman spectra and density functional theory calculation. Furthermore, the fabricated Al-air battery displays good flexibility and delivers a power density of 199.6 mW cm^-2 , and the binder-free and integrated cathode shows better discharge performance than the traditionally slurry casting cathode. This work demonstrates a facile and efficient approach to develop integrated air cathode for metal-air batteries.

Recent Advances in Energy Conversion Applications of Carbon Dots: From Optoelectronic Devices to Electrocatalysis

Exploitation and utilization of sustainable energy sources has increasingly become the common theme of global social development, which has promoted tremendous development of energy conversion devices/technologies. Owing to excellent and unique optical/electrical properties, carbon dots (CDs) have attracted extensive research interest for numerous energy conversion applications. Strong absorption, downconversion photoluminescence, electron acceptor/donor characteristics, and excellent electron conductivity endow CDs with enormous potential for applications in optoelectronic devices. Furthermore, excellent electron transfers/transport capacities and easily manipulable structural defects of CDs offer distinct advantages for electrocatalytic applications. Recent advances in CD-based energy conversion applications, including optoelectronic devices such as light-emitting diodes and solar cells, and electrocatalytic reactions including the hydrogen evolution reaction, oxygen evolution reaction, oxygen reduction reaction, and carbon dioxide reduction reaction, are summarized. Finally, current challenges and future prospects for CD-based energy conversion applications are proposed, highlighting the importance of controllable structural design and modifications.

Recent Advances on Self-Supported Arrayed Bifunctional Oxygen Electrocatalysts for Flexible Solid-State Zn-Air Batteries

Flexible solid-state Zn-air batteries have been rapidly developed benefiting from the uprising demand for wearable electronic devices, wherein the air electrode integrated with efficient bifunctional oxygen electrocatalysts plays an important role to achieve high performance. Binder-free self-supported bifunctional catalysts can provide large active surface area, fast electron transport path, easy ion diffusion, and excellent structural stability and flexibility, thus acting as promising flexible air cathodes. In this review, recent advances on the application of nanoarrayed electrocatalysts as air cathodes in flexible Zn-air batteries are reviewed. Especially, various types of bifunctional oxygen electrocatalysts, including carbonaceous material arrays, transition metal compound arrays, transition metal/carbon arrays, transition metal compound/carbon arrays, and other hybrid arrays, are discussed. The applications of flexible Zn-air batteries with two configurations (i.e., planar stacks and cable fibers) are also introduced. Finally, perspectives on the optimization of arrayed air cathodes for future development to achieve high-performance flexible Zn-air batteries are shared.

Pollen-derived porous carbon decorated with cobalt/iron sulfide hybrids as cathode catalysts for flexible all-solid-state rechargeable Zn-air batteries

The development of flexible all-solid-state rechargeable Zn-air batteries (FS-ZABs) for wearable applications faces challenges from the balance between performance and flexibility of the battery; efficient cathode catalyst and reasonable electrode construction design are key factors. Herein, a low-cost pollen derived N,S co-doped porous carbon decorated with Co9S8/Fe3S4 nanoparticle hybrids (Co-Fe-S@NSRPC) has been synthesized. Owing to the active Co9S8/Fe3S4 nanoparticles, N,S co-doping, and large specific area of the pollen derived porous carbon matrix, the Co-Fe-S@NSRPC composite exhibits an excellent bifunctional catalytic activity with a small potential gap (ΔE = 0.80 V) between the half-wave potential for the ORR (0.80 V) and the potential at 10 mA cm-2 for the OER (1.60 V), and endows a liquid Zn-air battery with a high power density of 138 mW cm-2, a larger specific capacity of 891 mA h g-1 and a stable rechargeability of up to 331 cycles. Based on the Co-Fe-S@NSRPC cathode catalyst, a 2D coplanar FS-ZAB has been fabricated with specially designed parallel narrow strip electrodes alternately arrayed on a polyacrylamide polyacrylic acid copolymer hydrogel solid electrolyte. The presented FS-ZAB exhibits excellent battery performance with high open-circuit-voltage (1.415 V), competitive peak power density (78 mW cm-2), large specific capacity (785 mA h g-1) and stable rechargeability (150 cycles), offers robust flexibility to maintain stable charge/discharge capacity under different bending deformations, and provides convenient coplanar integrability to realize parallel or series connection of multiple cells in a relatively small area.

Electrochemistry in Carbon-based Quantum Dots

Electrochemistry belongs to an important branch of chemistry that deals with the chemical changes produced by electricity and the production of electricity by chemical changes. Therefore, it can not only act a powerful tool for materials synthesis, but also offer an effective platform for sensing and catalysis. As extraordinary zero-dimensional materials, carbon-based quantum dots (CQDs) have been attracting tremendous attention due to their excellent properties such as good chemical stability, environmental friendliness, nontoxicity and abundant resources. Compared with the traditional methods for the preparation of CQDs, electrochemical (EC) methods offer advantages of simple instrumentation, mild reaction conditions, low cost and mass production. In return, CQDs could provide cost-effective, environmentally friendly, biocompatible, stable and easily-functionalizable probes, modifiers and catalysts for EC sensing. However, no specific review has been presented to systematically summarize both aspects until now. In this review, the EC preparation methods of CQDs are critically discussed focusing on CQDs. We further emphasize the applications of CQDs in EC sensors, electrocatalysis, biofuel cells and EC flexible devices. This review will further the experimental and theoretical understanding of the challenges and future prospective in this field, open new directions on exploring new advanced CQDs in EC to meet the high demands in diverse applications.