Interfacial Nanoinjection-Based Nanoliter Single-Cell Analysis

High-Efficiency Interdigitated Electrode-Based Droplet Merger for Enabling Error-Free Droplet Microfluidic Systems

Merging two droplets into a droplet to add and mix two contents is one of the common droplet microfluidic functions with droplet generation and sorting, performing broad ranges of biological and chemical assays in droplets. However, traditional droplet-merging techniques often encounter unsynchronized droplets, causing overmerging or mis-merging, and unwanted merging outside of the desired zone. This is more severe when the incoming droplets to be merged are polydisperse in their sizes, often observed in assays that require long-term incubation, elevated-temperature, and/or multiple droplet processing steps. Here, we developed an interdigitated electrode (IDE)-based droplet merger consisting of a droplet autosynchronizing channel and a merging channel. The autosynchronizing channel provides >95% merging efficiency even when 20% polydispersity in the droplet size exists. The highly localized and enhanced dielectrophoretic force generated by the IDEs on the channel bottom allows droplet merging at an extremely low voltage (4.5 V) and only locally at the IDE region. A systematic evaluation of how various design and operation parameters of the IDE merger, such as IDE finger dimensions, dielectric coating layer thickness, droplet size, and droplet flow speed impact the performance was conducted. The optimized device showed consistent performance even when operating for up to 100 h consecutively at high throughput (100 droplets/s). The presented technology has been integrated into a droplet microfluidics workflow to test the lytic activities of bacteriophage on bacterial host cells with 100% merging efficiency. We expect this function to be integrated into droplet microfluidic systems performing broad ranges of high-throughput chemical and biological assays.

Sample Preparation Methods for Targeted Single-Cell Proteomics

We compared three cell isolation and two proteomic sample preparation methods for single-cell and near-single-cell analysis. Whole blood was used to quantify hemoglobin (Hb) and glycated-Hb (gly-Hb) in erythrocytes using targeted mass spectrometry and stable isotope-labeled standard peptides. Each method differed in cell isolation and sample preparation as follows: 1) FACS and automated preparation in one-pot for trace samples (autoPOTS); 2) limited dilution via microscopy and a novel rapid one-pot sample preparation method that circumvented the need for the solid-phase extraction, low-volume liquid handling instrumentation and humidified incubation chamber; and 3) CellenONE-based cell isolation and the same one-pot sample preparation method used for limited dilution. Only the CellenONE device routinely isolated single-cells from which Hb was measured to be 540-660 amol per red blood cell (RBC), which was comparable to the calculated SI reference range for mean corpuscular hemoglobin (390-540 amol/RBC). FACSAria sorter and limited dilution could routinely isolate single-digit cell numbers, to reliably quantify CMV-Hb heterogeneity. Finally, we observed that repeated measures, using 5-25 RBCs obtained from N = 10 blood donors, could be used as an alternative and more efficient strategy than single RBC analysis to measure protein heterogeneity, which revealed multimodal distribution, unique for each individual.

Integrated identification of growth pattern and taxon of bacterium in gut microbiota via confocal fluorescence imaging-oriented single-cell sequencing

Despite the fast progress in our understanding of the complex functions of gut microbiota, it is still challenging to directly investigate the in vivo microbial activities and processes on an individual cell basis. To gain knowledge of the indigenous growth/division patterns of the diverse mouse gut bacteria with a relatively high throughput, here, we propose an integrative strategy, which combines the use of fluorescent probe labeling, confocal imaging with single-cell sorting, and sequencing. Mouse gut bacteria sequentially labeled by two fluorescent d-amino acid probes in vivo were first imaged by confocal microscopy to visualize their growth patterns, which can be unveiled by the distribution of the two fluorescence signals on each bacterium. Bacterial cells of interest on the imaging slide were then sorted using a laser ejection equipment, and the collected cells were then sequenced individually to identify their taxa. Our strategy allows integrated acquirement of the growth pattern knowledge of a variety of gut bacteria and their genomic information on a single-cell basis, which should also have great potential in studying many other complex bacterial systems.

Interfacing microfluidics with information-rich detection systems for cells, bioparticles, and molecules

The development of elegant and numerous microfluidic manipulations has enabled significant advances in the processing of small volume samples and the detection of minute amounts of biomaterials. Effective isolation of single cells in a defined volume as well as manipulations of complex bioparticle or biomolecule mixtures allows for the utilization of information-rich detection methods including mass spectrometry, electron microscopy imaging, and amplification/sequencing. The art and science of translating biosamples from microfluidic platforms to highly advanced, information-rich detection system is the focus of this review, where we term the translation between the microfluidics elements to the external world “off-chipping.” When presented with the challenge of presenting sub-nanoliter volumes of manipulated sample to a detection scheme, several delivery techniques have been developed for effective analysis. These techniques include spraying (electrospray, nano-electrospray, pneumatic), meniscus-defined volumes (droplets, plugs), constrained volumes (narrow channels, containers), and phase changes (deposition, freezing). Each technique has been proven effective in delivering highly defined samples from microfluidic systems to the detection elements. This review organizes and presents selective publications that illustrate the advancements of these delivery techniques with respect to the type of sample analyzed, while introducing each strategy and providing historical perspective. The publications highlighted in this review were chosen due to their significance and relevance in the development of their respective off-chip technique.

Microfluidic technologies for nanoparticle formation

Functional nanoparticles (NPs) hold immense promise in diverse fields due to their unique biological, chemical, and physical properties associated with size or morphology. Microfluidic technologies featuring precise fluid manipulation have become versatile toolkits for manufacturing NPs in a highly controlled manner with low batch-to-batch variability. In this review, we present the fundamentals of microfluidic fabrication strategies, including mixing-, droplet-, and multiple field-based microfluidic methods. We highlight the formation of functional NPs using these microfluidic reactors, with an emphasis on lipid NPs, polymer NPs, lipid-polymer hybrid NPs, supramolecular NPs, metal and metal-oxide NPs, metal-organic framework NPs, covalent organic framework NPs, quantum dots, perovskite nanocrystals, biomimetic NPs, etc. we discuss future directions in microfluidic fabrication for accelerated development of functional NPs, such as device parallelization for large-scale NP production, highly efficient optimization of NP formulations, and AI-guided design of multi-step microfluidic reactors.

Emulsion Designer Using Microfluidic Three-Dimensional Droplet Printing in Droplet

Hierarchical emulsions are interesting for both scientific researches and practical applications. Hierarchical emulsions prepared by microfluidics require complicated device geometry and delicate control of flow rates. Here, a versatile method is developed to design hierarchical emulsions using microfluidic 3D droplet printing in droplet. The process of droplet printing in droplet mimics the dragonfly laying eggs and has advantages of easy processing and flexible design. To demonstrate the capability of the method, double emulsions and triple emulsions with tunable core number, core size, and core composition are prepared. The hierarchical emulsions are excellent templates for the developments of functional materials. Flattened crescent-moon-shaped particles are then fabricated using double emulsions printed in confined 2D space as templates. The particles are excellent delivery vehicles for 2D interfaces, which can load and transport cargos through a well-defined trajectory under external magnetic steering. Microfluidic 3D droplet printing in droplet provides a powerful platform with improved simplicity and flexibility for the design of hierarchical emulsions and functional materials.

One cell at a time: droplet-based microbial cultivation, screening and sequencing

Microbes thrive and, in turn, influence the earth's environment, but most are poorly understood because of our limited capacity to reveal their natural diversity and function. Developing novel tools and effective strategies are critical to ease this dilemma and will help to understand their roles in ecology and human health. Recently, droplet microfluidics is emerging as a promising technology for microbial studies with value in microbial cultivating, screening, and sequencing. This review aims to provide an overview of droplet microfluidics techniques for microbial research. First, some critical points or steps in the microfluidic system are introduced, such as droplet stabilization, manipulation, and detection. We then highlight the recent progress of droplet-based methods for microbiological applications, from high-throughput single-cell cultivation, screening to the targeted or whole-genome sequencing of single cells.