Fibrous-Structured Freestanding Electrodes for Oxygen Electrocatalysis

One-dimensional carbon based nanoreactor fabrication by electrospinning for sustainable catalysis

An efficient and economical electrocatalyst as kinetic support is key to electrochemical reactions. For this reason, chemists have been working to investigate the basic changing of chemical principles when the system is confined in limited space with nanometer-scale dimensions or sub-microliter volumes. Inspired by biological research, the design and construction of a closed reaction environment, namely the reactor, has attracted more and more interest in chemistry, biology, and materials science. In particular, nanoreactors became a high-profile rising star and different types of nanoreactors have been fabricated. Compared with the traditional particle nanoreactor, the one-dimensional (1D) carbon-based nanoreactor prepared by the electrospinning process has better electrolyte diffusion, charge transfer capabilities, and outstanding catalytic activity and selectivity than the traditional particle catalyst which has great application potential in various electrochemical catalytic reactions.

Advances in Cellulose-Based Composites for Energy Applications

The various forms of cellulose-based materials possess high mechanical and thermal stabilities, as well as three-dimensional open network structures with high aspect ratios capable of incorporating other materials to produce composites for a wide range of applications. Being the most prevalent natural biopolymer on the Earth, cellulose has been used as a renewable replacement for many plastic and metal substrates, in order to diminish pollutant residues in the environment. As a result, the design and development of green technological applications of cellulose and its derivatives has become a key principle of ecological sustainability. Recently, cellulose-based mesoporous structures, flexible thin films, fibers, and three-dimensional networks have been developed for use as substrates in which conductive materials can be loaded for a wide range of energy conversion and energy conservation applications. The present article provides an overview of the recent advancements in the preparation of cellulose-based composites synthesized by combining metal/semiconductor nanoparticles, organic polymers, and metal-organic frameworks with cellulose. To begin, a brief review of cellulosic materials is given, with emphasis on their properties and processing methods. Further sections focus on the integration of cellulose-based flexible substrates or three-dimensional structures into energy conversion devices, such as photovoltaic solar cells, triboelectric generators, piezoelectric generators, thermoelectric generators, as well as sensors. The review also highlights the uses of cellulose-based composites in the separators, electrolytes, binders, and electrodes of energy conservation devices such as lithium-ion batteries. Moreover, the use of cellulose-based electrodes in water splitting for hydrogen generation is discussed. In the final section, we propose the underlying challenges and outlook for the field of cellulose-based composite materials.

3D Interconnected Honeycomb-Like Multifunctional Catalyst for Zn-Air Batteries

Developing high-performance and low-cost electrocatalysts is key to achieve the clean-energy target. Herein, a dual regulation method is proposed to prepare a 3D honeycomb-like carbon-based catalyst with stable Fe/Co co-dopants. Fe atoms are highly dispersed and fixed to the polymer microsphere, followed by a high-temperature decomposition, for the generation of carbon-based catalyst with a honeycomb-like structure. The as-prepared catalyst contains a large number of Fe/Co nanoparticles (Fe/Co NPs), providing the excellent catalytic activity and durability in oxygen reduction reaction, oxygen evolution reaction and hydrogen evolution reaction. The Zn-air battery assembled by the as-prepared catalyst as air cathode shows a good charge and discharge capacity, and it exhibits an ultra-long service life by maintaining a stable charge and discharge platform for a 311-h cycle. Further X-ray absorption fine structure characterization and density functional theory calculation confirms that the Fe doping optimizes the intermediate adsorption process and electron transfer of Co.

Self-standing Fe3O4 decorated paper electrode as a binder-free trifunctional electrode for electrochemical ammonia synthesis and Zn-O2 batteries

The conversion of the abundant biodegradable material into electroactive electrode material can be a good resource for sustainable energy conversion and storage applications. Herein, we present a simple, cost-effective and green approach for the fabrication of a flexible cellulose paper electrode using an electroless-electrodeposition method. The one-step electroless deposition route is followed to induce conductivity into a non-conductive cellulose paper substrate without using any expensive activators or sensitisers. The Fe₃O₄ is then electro-deposited as an active catalyst over the conductive paper substrate for use in electrochemical activities. The as-fabricated paper electrode shows promising activity and stability during the dinitrogen reduction reaction (NRR) as well as oxygen bifunctional electrocatalysis. A faradaic efficiency of 4.32% with a yield rate of 245 μg h^-1 mg_cat^-1 at -0.1 V is achieved for NRR whereas a very small overpotential of 180 mV is required to reach 10 mA cm^-2 during OER, and the ORR reaction starts at the onset potential of 0.86 V. The practical applicability of the paper electrode is validated by assembling a Zn-O₂ battery showing a peak power density of 81 mW cm^-2 and a stability up to 35 h during charge-discharge cycles, which can power the NRR to produce NH₃ under full cell conditions.

Palladium Impregnation on Electrospun Carbon Fibers for Catalytic Reduction of Bromate in Water

The remediation of bromate in water is a concern due to the reported health issues caused by its ingestion. Catalytic processes, wherein bromate is reduced to non-hazardous bromide, have been studied. In the present work, catalysts of 1% palladium supported in electrospun carbon fibers (Pd-CFs) using different methods for palladium incorporation were prepared. The textural properties, morphology, crystalline structure, and hydrogenation capacity by H2 chemisorption analysis of the Pd-CFs catalysts were characterized. The catalytic tests were performed in a semi-batch reactor, and the obtained results showed different catalytic activity by each prepared Pd-CFs catalyst. The catalysts prepared by incipient wetness impregnation—1% Pd/CF1 and 1% Pd/CF2, using CFs obtained with electrospinning flow rates of 0.5 mL h−1 and 2 mL h−1, respectively—achieved total bromate reduction after 120 min of operation; however, 1% Pd/CF1 obtained total reduction as early as 30 min. Taking into account the catalyst properties, 1% Pd/CF1 showed a good catalytic activity due to CFs morphology obtained using a low electrospinning flow rate, while the Pd incorporation method allowed a high availability of active sites with hydrogenation properties for bromate reduction.

Research Progress on the Applications of Electrospun Nanofibers in Catalysis

During the last two decades, electrospinning has become a very popular technique for the fabrication of nanofibers due to its low cost and simple handling. Nanofiber materials have found utilization in many areas such as medicine, sensors, batteries, etc. In catalysis, these materials also present important advantages, since they present a low resistance to internal diffusion and a high surface area to volume ratio. These advantages are mainly due to the diameter–length proportion. A bibliographic analysis on the applications of electrospun nanofibers in catalysis shows that there are two important groups of catalysts that are being investigated, based on TiO2 and in carbon materials. The main applications found are in photo- and in electro-catalysis. The present study contributes by reviewing these catalytic applications of electrospun nanofibers and demonstrating that they are promising materials as catalysts, underlining some works to prove the advantages and possibilities that these materials have as catalysts. On one hand, the possibilities of synthesis are almost infinite, since with coaxial electrospinning quite complex nanofibers with different layers can be prepared. On the other hand, the diameter and other properties can be controlled by monitoring the applied voltage and other parameters during the synthesis, being quite reproducible procedures. The main advantages of these materials can be grouped in two: one related to their morphology, as has been commented, relative to their low resistance and internal diffusion, that is, their fluidynamic behavior in the reactor; the second group involves advantages related to the fact that the active phases can be nanoscaled and dispersed, improving the activity and selectivity in comparison with conventional catalytic materials with the same chemical composition.

Organic/Inorganic Hybrid Fibers: Controllable Architectures for Electrochemical Energy Applications

Organic/inorganic hybrid fibers (OIHFs) are intriguing materials, possessing an intrinsic high specific surface area and flexibility coupled to unique anisotropic properties, diverse chemical compositions, and controllable hybrid architectures. During the last decade, advanced OIHFs with exceptional properties for electrochemical energy applications, including possessing interconnected networks, abundant active sites, and short ion diffusion length have emerged. Here, a comprehensive overview of the controllable architectures and electrochemical energy applications of OIHFs is presented. After a brief introduction, the controllable construction of OIHFs is described in detail through precise tailoring of the overall, interior, and interface structures. Additionally, several important electrochemical energy applications including rechargeable batteries (lithium-ion batteries, sodium-ion batteries, and lithium-sulfur batteries), supercapacitors (sandwich-shaped supercapacitors and fiber-shaped supercapacitors), and electrocatalysts (oxygen reduction reaction, oxygen evolution reaction, and hydrogen evolution reaction) are presented. The current state of the field and challenges are discussed, and a vision of the future directions to exploit OIHFs for electrochemical energy devices is provided.

Nanoscaled and Atomic Ruthenium Electrocatalysts Confined Inside Super-Hydrophilic Carbon Nanofibers for Efficient Hydrogen Evolution Reaction

A series of Ru-based catalysts have been developed for the hydrogen evolution reaction (HER) by the facile impregnation of copious and eco-friendly bacterial cellulose (BC) with Ru(bpy)₃ Cl₂ (bpy = 2,2'-bipyridine) followed by pyrolysis. After the oxidation and molecular recomposition processes that occur within the BC precursors during pyrolysis, sub-2 nm Ru nanoparticles (NPs) and atomic Ru species confined within surface-oxidized N-doped carbon nanofibers (CNFs) can be observed in the derived catalysts. The surface oxidation of CNFs leads the derived catalysts with super hydrophilicity and water-absorbing capacity, and also provides dimensional confinement for the nanoscaled and atomic Ru species. With these added structural advantages and the component synergy, the derived catalysts show superior HER activities, for which the overpotentials are as low as 19.6 mV (1 m KOH) and 55.0 mV (0.5 m H₂ SO₄ ) for the most active case at the current density of 10 mA cm^-2 . Moreover, superior HER activity can be also achieved for the catalysts derived with a wide range of Ru loadings. Finally, the influence of Ru NP size on HER activity is investigated by density functional theory simulations. This method provides a reliable protocol for preparing highly active HER catalysts for scale-up applications.

Defect Electrocatalysts and Alkaline Electrolyte Membranes in Solid-State Zinc-Air Batteries: Recent Advances, Challenges, and Future Perspectives

Rechargeable zinc-air batteries (ZABs) have attracted much attention due to their promising capability for offering high energy density while maintaining a long operational lifetime. One of the biggest challenges in developing all-solid-state ZABs is to design suitable bifunctional air-electrodes, which can efficiently catalyze the key oxygen reduction reaction (ORR)/oxygen evolution reaction (OER) electrochemical processes. The other one is to develop robust electrolyte membranes with high ionic conductivity and superb water retention capability. In this review, an in-depth discussion of the challenges, mechanisms, and design strategies for the defect electrocatalyst and the electrolyte membrane in all-solid-state ZABs will be offered. In particular, the crucial defect engineering strategies to tune the ORR/OER catalysts are summarized, including direct controllable strategies: 1) atomically dispersed metal sites control, 2) vacancy defects control, and 3) lattice-strain control, and the indirect strategies: 4) crystallographic structure control and 5) metal-carbon support interaction control. Moreover, the most recent progress in designing electrolyte membranes, including polyvinyl alcohol-based membranes and gel polymer electrolyte membranes, is presented. Finally, the perspectives are proposed for rational design and fabrication of the desired air electrode and electrolyte membrane to improve the performance and prolong the lifetime of all-solid-state ZABs.