SnO2 Quantum Dots: Rational Design to Achieve Highly Reversible Conversion Reaction and Stable Capacities for Lithium and Sodium Storage

Synergistically Boosting Li Storage Performance of MnWO4 Nanorods Anode via Carbon Coating and Additives

Polyanionic structures, (MO4)n-, can be beneficial to the transport of lithium ions by virtue of the open three-dimensional frame structure. However, an unstable interface suppresses the life of the (MO4)n--based anode. In this study, MnWO4@C nanorods with dense nanocavities have been synthesized through a hydrothermal route, followed by a chemical deposition method. As a result, the MnWO4@C anode exhibits better cycle and rate performance than MnWO4 as a Li-ion battery; the capacity is maintained at 718 mAh g-1 at 1000 mA g-1 after 400 cycles because the transport of lithium ions and the contribution of pseudo-capacitance are increased. Generally, benefiting from the carbon shell and electrolyte additive (e.g., FEC), the cycle performance of the MnWO4@C electrode is also effectively improved for lithium storage.

SnO2/SnS heterojunction anchoring on CMK-3 mesoporous network improves the reversibility of conversion reaction for lithium/sodium ions storage

Tin oxide-based (SnO2) materials show high theoretical capacity for lithium and sodium storage benefiting from a double-reaction mechanism of conversion and alloying reactions. However, due to the limitation of the reaction thermodynamics and kinetics, the conversion reaction process of SnO2usually shows irreversibility, resulting in serious capacity decay and hindering the further application of the SnO2anode. Herein, SnO2/SnS heterojunction was anchored on the surface and inside of CMK-3 byinsitusynthesis method, forming a stable 3D structural material (SnO2/SnS@CMK-3). The electrochemical properties of SnO2/SnS@CMK-3 composite show high capacity and reversible conversion reaction, which was attributed to the synergistic effect of CMK-3 and SnO2/SnS heterojunction. To further investigate the influence of the heterojunction on the reversibility of the conversion reaction, the Gibbs free energy (ΔG) was calculated using density functional theory. The results show that SnO2/SnS heterojunction has a closer to zero ΔGfor lithium/sodium ion batteries compared to SnO2, indicating that the heterojunction enhances the reversibility of the conversion reaction in chemical reaction thermodynamics. Our work provides insights into the reversibility of the conversion reaction of SnO2-based materials, which is essential for improving their electrochemical performance.

Rational engineering of a carbon skeleton supported tin dioxide nanocomposite from MOF on graphene precursor for superior lithium and sodium ion storage

Tin dioxide (SnO2) is being investigated as a promising anode material for both lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). Effectively dispersing small sized SnO2 crystals in well-designed carbonaceous matrices using eco-friendly materials and simplified methods is an urgent task. Herein, gallic acid (GA) molecules, abundant in plant kingdom, are firstly selected to react with few-layered graphene oxide (GO) in mild hydrothermal condition, and the GA modulated reduced graphene oxide (GA@RGO) supporting skeleton can be obtained. Then Sn-GA metal-organic framework (MOF) domains can be directly engineered on the surface of the GA@RGO sheets with controlled size and improved dispersion. Finally, the well-designed Sn-GA@RGO precursor is converted to the SnO2/C/RGO nanocomposite with significantly optimized microstructure. The SnO2/C/RGO sample delivers an excellent specific capacity of 823.6 mAh·g-1 after 700 cycles at 1000 mA·g-1 in half-cells and 741.3 mAh·g-1 after 50 cycles at 200 mA·g-1 in full-cells for LIBs, a specific capacity of 370.3 mAh·g-1 after 600 cycles at 200 mA·g-1 in half-cells for SIBs. The sample preparation strategy is rationally established by comprehensively understanding the interactions between GO sheets, Sn2+ ions and GA molecules, and the engineered SnO2/C/RGO nanocomposite has good prospects in wider fields.

Co quantum dots embedded in modified montmorillonite loaded with graphitized carbon as an ultra-stable anode material for sodium-ion battery

Carbonaceous materials are competitive anodes in sodium-ion batteries (SIBs) due to their advantages, such as low cost, abundant active sites, and porosity. However, this type of material still suffers from slow rate capability and low capacity, which greatly hinders its application. In this work, the biomass-derived carbon is optimized based on a layered montmorillonite (Mt) skeleton and the cobalt quantum dots (Co QDs). A three-dimensional (3D) combination, specifically a 3D flower-like structure, of 0D material (Co QDs) and a two-dimensional (2D) material (Mt) has been achieved. The optimization and local limited effects of the Co QDs on the electronic properties have been demonstrated by density functional theory (DFT). The metallic Co QDs and carbon could form a Mott-Schottky junction, enhancing the conductivity and Na+ adsorption. Due to the synergetic improvement of structure and conductivity, the stripped Mt embedded with Co QDs loaded with nitrogen doped carbon (FMt@Co-NC) shows ultra-stable cycle stability (99.12% retention after 10,000 cycles at 10 A/g). This is the first time that Mt has been employed in high performance SIBs, which incubates a grand blueprint for effectively utilizing similar inactive energy-storage materials, through a simple and reliable approach.

Rational Engineering of p-n Heterogeneous ZnS/SnO2 Quantum Dots with Fast Ion Kinetics for Superior Li/Na-Ion Battery

Constructing heterogeneous nanostructures is an efficient strategy to improve the electrical and ionic conductivity of metal chalcogenide-based anodes. Herein, ZnS/SnO2 quantum dots (QDs) as p-n heterojunctions that are uniformly anchored to reduced graphene oxides (ZnS-SnO2 @rGO) are designed and engineered. Combining the merits of fast electron transport via the internal electric field and a greatly shortened Li/Na ion diffusion pathway in the ZnS/SnO2 QDs (3-5 nm), along with the excellent electrical conductivity and good structural stability provided by the rGO matrix, the ZnS-SnO2 @rGO anode exhibits enhanced electronic and ionic conductivity, which can be proved by both experiments and theoretical calculations. Consequently, the ZnS-SnO2 @rGO anode shows a significantly improved rate performance that simple counterpart composite anodes cannot achieve. Specifically, high reversible specific capacities are achieved for both lithium-ion battery (551 mA h g-1 at 5.0 A g-1 , 670 mA h g-1 at 3.0 A g-1 after 1400 cycles) and sodium-ion battery (334 mA h g-1 at 5.0 A g-1 , 313 mA h g-1 at 1.0 A g-1 after 400 cycles). Thus, this strategy to build semiconductor metal sulfides/metal oxide heterostructures at the atomic scale may inspire the rational design of metal compounds for high-performance battery applications.

Construction of Carbon Nanofiber-Wrapped SnO2 Hollow Nanospheres as Flexible Integrated Anode for Half/Full Li-Ion Batteries

SnO2 is deemed a potential candidate for high energy density (1494 mAh g-1) anode materials for Li-ion batteries (LIBs). However, its severe volume variation and low intrinsic electrical conductivity result in poor long-term stability and reversibility, limiting the further development of such materials. Therefore, we propose a novel strategy, that is, to prepare SnO2 hollow nanospheres (SnO2-HNPs) by a template method, and then introduce these SnO2-HNPs into one-dimensional (1D) carbon nanofibers (CNFs) uniformly via electrospinning technology. Such a sugar gourd-like construction effectively addresses the limitations of traditional SnO2 during the charging and discharging processes of LIBs. As a result, the optimized product (denoted SnO2-HNP/CNF), a binder-free integrated electrode for half and full LIBs, displays superior electrochemical performance as an anode material, including high reversible capacity (~735.1 mAh g-1 for half LIBs and ~455.3 mAh g-1 at 0.1 A g-1 for full LIBs) and favorable long-term cycling stability. This work confirms that sugar gourd-like SnO2-HNP/CNF flexible integrated electrodes prepared with this novel strategy can effectively improve battery performance, providing infinite possibilities for the design and development of flexible wearable battery equipment.

Compact TiO2@SnO2@C heterostructured particles as anode materials for sodium-ion batteries with improved volumetric capacity

Sodium-ion batteries (SIBs) are promising candidates for large-scale energy storage. Increasing the energy density of SIBs demands anode materials with high gravimetric and volumetric capacity. To overcome the drawback of low density of conventional nanosized or porous electrode materials, compact heterostructured particles are developed in this work with improved Na storage capacity by volume, which are composed of SnO2 nanoparticles loaded into nanoporous TiO2 followed by carbon coating. The resulted TiO2@SnO2@C (denoted as TSC) particles inherit the structural integrity of TiO2 and extra capacity contribution from SnO2, delivering a volumetric capacity of 393 mAh cm-3 notably higher than that of porous TiO2 and commercial hard carbon. The heterogeneous interface between TiO2 and SnO2 is believed to promote the charge transfer and facilitate the redox reactions in the compact heterogeneous particles. This work demonstrates a useful strategy for electrode materials with high volumetric capacity.

Constructing Biomass-Based Ultrahigh-Rate Performance SnOy @C/SiOx Anode for LIBs via Disproportionation Effect

To break the stereotype that silica can only be reduced via a magnesiothermic and aluminothermic method at low-temperature condition, the novel strategy for converting silica to SiO_x using disproportionation effect of SnO generated via low-temperature pyrolysis coreduction reaction between SnO₂ and rice husk is proposed, without any raw materials waste and environmental hazards. After the low-temperature pyrolysis reaction, SnO_y @C/SiO_x composites with unique structure (Sn/SnO₂ dispersed on the surface and within pores of biochar as well as SiO_x residing in the interior) are obtained due to the exclusive biological properties of rice husk. Such unique structural features render SnO_y @C/SiO_x composites with an excellent talent for repairing the damaged structure and the highly electrochemical storage ability (530.8 mAh g^-1 at 10 A g^-1 after 7500 cycles). Furthermore, assembled LiFePO₄ ||SnO_y -50@C/SiO_x full cell displays a high discharge capacity of 463.7 mAh g^-1 after 100 cycles at 0.2 A g^-1 . The Li⁺ transport mechanism is revealed by density functional theory calculations. This work provides references and ideas for green, efficient, and high-value to reduce SiO₂ , especially in biomass, which also avoids the waste of raw materials in the production process, and becomes an essential step in sustainable development.

Facile Synthesis of Hybrid Anodes with Enhanced Lithium-Storage Performance Realized by a "Synergistic Effect"

Alloying-type anodes including Si- and Sn-based materials are considered the most exploitable anodes for high-performance lithium-ion batteries. However, problems of poor kinetics properties and structural failures such as grain pulverization and coarsening hinder their large-scale application. Herein, SnO₂/Si@graphite hybrid anodes, with nano-SnO₂ and nano-Si thoroughly mixed with each other and loaded onto graphite flakes, have been prepared by a facile ball milling method. Attributed to the "synergistic effect" between SnO₂ and Si, the mechanical stability and kinetics properties can be remarkably enhanced. Furthermore, graphite substrate supplies a fast electrically conductive path and buffers the volume expansion of active particles. Accordingly, SnO₂/Si@graphite delivers 798.9 mAh g^-1 at 200 mA g^-1 and maintains 550.8 mAh g^-1 after 1000 cycles at 1 A g^-1 in half cells. Impressively, a high energy density of 431.4 Wh kg^-1 (based on the mass of anode and cathode) can be obtained in full cells when paired with the NCM622 cathode. This work presents an effective strategy to exploit high-performance alloying-type anodes for LIBs by designing hybrid materials with multiple active components.

Highly Fluorescent Collagen-Based Quantum Dots as an Efficient Interlinkage in the 2D Perovskite Bulk for Improved Solar Cells

A design-inexpensive, effective, and easy-to-prepare additive in the large-scale preparation of perovskite solar cells (PSCs) is urgently desired to alleviate the future energy crisis. Carbon-based quantum dots have demonstrated novel nanomaterials with excellent chemical stability and high electrical conductivity, which exhibit great potential as additives for perovskite optoelectronics. Herein, we designed novel highly fluorescent collagen-based quantum dots (Col-QDs) and thoroughly studied the micromorphological characteristics, photoluminescence properties, and the states of surface-functionalized groups on the Col-QDs. It is found that the introduction of Col-QDs in the two-dimensional (2D) perovskite precursor can be further confirmed as an efficient interlinkage via Col-Pb bands in the pure 2D perovskite heterojunction, which significantly improves the crystallinity, orientation, and interlayer coupling of perovskite crystal plates, as observed by grazing incidence X-ray diffraction (GIWAXS) and X-ray photoelectron spectroscopy (XPS). Finally, the champion Col-QD additive can efficiently modulate the photovoltaic performance of pure 2D PSCs with a significant increase of photoelectric conversion efficiency (PCE) from 8.18% up to 10.45%, which ranks among the best efficiencies of highly pure 2D PSCs. These results provide a facile and feasible approach to modulate the interlayer interaction of pure 2D perovskites and further improve their output of PSCs, which would further facilitate the burgeoning applications of the Col-QDs in various perovskite-based optical-related fields.

Improved Li storage performance of SnO nanodisc on SnO2quantum dots embedded carbon matrix

Li-ion batteries with conversion type anode are attractive choice, for electric vehicles and portable electronic devices, because of their high theoretical capacity and cycle stability. On the contrary, enormous volume change during lithiation/delithiation and irreversible conversion reaction limits use of such anodes. To overcome these challenges, incorporating nano-sized SnO_xon flexible carbonaceous matrix is an efficient approach. A facile and scalable fabrication of SnO nanodisc decorated on SnO₂quantum dots embedded carbon (SnO_x@C) is reported in the present study. Detailed structural and morphological investigation confirms the successful synthesis of SnO_x@C composite with 72.3 wt% SnO_xloading. The CV profiles of the nanocomposite reveal a partial reversibility of conversion reaction for the active materials SnO_x. Such partial reversible conversion enhances the overall capacity of the nanocomposite. It delivers a very high discharge capacity of 993 mAh g^-1at current density of 0.05 A g^-1after 200 cycles; which is 2.6 times higher than that of commercial graphitic anode (372 mAh g^-1) and very close to the calculated capacity of the SnO_x@C composite. This unique nanocomposite remarkably improves Li storage performance in terms of reversible capacity, rate capability and cycling performance. It is established that such engineered anode can efficiently reduce the electrode pulverization and in turn make conversion reaction of tin partially reversible.

SnO2 Anchored in S and N Co-Doped Carbon as the Anode for Long-Life Lithium-Ion Batteries

Tin dioxide (SnO2) has been the focus of attention in recent years owing to its high theoretical capacity (1494 mAh g-1). However, the application of SnO2 has been greatly restricted because of the huge volume change during charge/discharge process and poor electrical conductivity. In this paper, a composite material composed of SnO2 and S, N co-doped carbon (SnO2@SNC) was prepared by a simple solid-state reaction. The as-prepared SnO2@SNC composite structures show enhanced lithium storage capacity as compared to pristine SnO2. Even after cycling for 1000 times, the as-synthesized SnO2@SNC can still deliver a discharge capacity of 600 mAh g-1 (current density: 2 A g-1). The improved electrochemical performance could be attributed to the enhanced electric conductivity of the electrode. The introduction of carbon could effectively improve the reversibility of the reaction, which will suppress the capacity fading resulting from the conversion process.

Tin-Based Anode Materials for Stable Sodium Storage: Progress and Perspective

Because of concerns regarding shortages of lithium resources and the urgent need to develop low-cost and high-efficiency energy-storage systems, research and applications of sodium-ion batteries (SIBs) have re-emerged in recent years. Herein, recent advances in high-capacity Sn-based anode materials for stable SIBs are highlighted, including tin (Sn) alloys, Sn oxides, Sn sulfides, Sn selenides, Sn phosphides, and their composites. The reaction mechanisms between Sn-based materials and sodium are clarified. Multiphase and multiscale structural optimizations of Sn-based materials to achieve good sodium-storage performance are emphasized. Full-cell designs using Sn-based materials as anodes and further development of Sn-based materials are discussed from a commercialization perspective. Insights into the preparation of future high-performance Sn-based anode materials and the construction of sodium-ion full batteries with a high energy density and long service life are provided.

Optimizing SnO2- x /Fe2 O3 Hetero-Nanocrystals Toward Rapid and Highly Reversible Lithium Storage

Engineering oxygen vacancy and boosting Li₂ O reversibility on oxides-based electrode are of significance but remains a challenge in high-power lithium-ion batteries. Herein, the heterogenous SnO_{2- x} /Fe₂ O_{3- y} nanocrystals are demonstrated with tailorable x and y values enabled by a glucose-assisted spray combustion technique. Density functional theory calculations unveil the SnO_{2- x} /Fe₂ O₃ with a maximum x value has the optimal electronic structure, the metallic Fe generated from Fe₂ O₃ can markedly reduce the free energy to break Li-O bonds for accelerating subsequent delithiation process of Li₂ O. Consequently, the optimized SnO_{2- x} /Fe₂ O₃ exhibits a remarkably enhanced electrochemical reversibility and reaction kinetics. After stabilized by reduced graphene oxide, the hybrid delivers a high reversible specific capacity of 1113 mAh g^-1 with superior rate performance (474 mAh g^-1 at 20 A g^-1 ) and long cycle life (negligible loss after 500 cycles at 5 A g^-1 ), the oxygen vacancy and microstructure are well-maintained after cycles. This work provides the possibilities for skillfully regulating oxygen vacancy and meantime enhancing Li₂ O reversibility.

Light-Motivated SnO2 /TiO2 Heterojunctions Enabling the Breakthrough in Energy Density for Lithium-Ion Batteries

Powering lithium-ion batteries (LIBs) by light-irradiation will bring a paradigm shift in energy-storage technologies. Herein, a photoaccelerated rechargeable LIB employing SnO₂ /TiO₂ heterojunction nanoarrays as a multifunctional anode is developed. The electron-hole pairs generated by the Li_x TiO₂ (x ≥ 0) under light irradiation synergistically enhance the lithiation kinetics and electrochemical reversibility of both SnO₂ and TiO₂ . Specifically, the electrons can quickly pour into the SnO₂ and the generated Sn due to the more positive conduction band potentials (vs TiO₂ ), and mean while the holes also promote the intercalation of Li⁺ into TiO₂ by reaching charge balance. A remarkable increase in areal specific capacity is therefore achieved from 1.91 to 3.47 mAh cm^-2 at 5 mA cm^-2 . More impressively, there is no capacity loss even through 100 cycles, which is the best report for photorechargeable LIBs to date, owing to the strong and stable photoresponse current. This finding exhibits a feasible pathway to break the limitation in the energy density of LIBs by the efficient conversion and storage of solar energy.

Conversion-Alloying Anode Materials for Sodium Ion Batteries

The past decade has witnessed a rapidly growing interest toward sodium ion battery (SIB) for large-scale energy storage in view of the abundance and easy accessibility of sodium resources. Key to addressing the remaining challenges and setbacks and to translate lab science into commercializable products is the development of high-performance anode materials. Anode materials featuring combined conversion and alloying mechanisms are one of the most attractive candidates, due to their high theoretical capacities and relatively low working voltages. The current understanding of sodium-storage mechanisms in conversion-alloying anode materials is presented here. The challenges faced by these materials in SIBs, and the corresponding improvement strategies, are comprehensively discussed in correlation with the resulting electrochemical behavior. Finally, with the guidance and perspectives, a roadmap toward the development of advanced conversion-alloying materials for commercializable SIBs is created.

Energetic-Materials-Driven Synthesis of Graphene-Encapsulated Tin Oxide Nanoparticles for Sodium-Ion Batteries

By evenly mixing polytetrafluoroethylene-silicon energetic materials (PTFE-Si EMs) with tin oxide (SnO₂) particles, we demonstrate a direct synthesis of graphene-encapsulated SnO₂ (Gr-SnO₂) nanoparticles through the self-propagated exothermic reaction of the EMs. The highly exothermic reaction of the PTFE-Si EMs released a huge amount of heat that induced an instantaneous temperature rise at the reaction zone, and the rapid expansion of the gaseous SiF₄ product provided a high-speed gas flow for dispersing the molten particles into finer nanoscale particles. Furthermore, the reaction of the PTFE-NPs with Si resulted in a simultaneous synthesis of graphene that encapsulated the SnO₂ nanoparticles in order to form the core-shell nanostructure. As sodium storage material, the graphene-encapsulated SnO₂ nanoparticles exhibit a good cycling performance, superior rate capability, and a high initial Coulombic efficiency of 85.3%. This proves the effectiveness of our approach for the scalable synthesis of core-shell-structured graphene-encapsulated nanomaterials.

Double Confined MoO2/Sn/NC@NC Nanotubes: Solid-Liquid Synthesis, Conformal Transformation, and Excellent Lithium-Ion Storage

The rational design of a hollow heterostructure promotes the development of highly durable anode materials for lithium-ion batteries. Herein, carbon-confined MoO₂/Sn/NC@NC heterostructured nanotubes evolving from MoO₃ nanorods have been successfully synthesized for the first time. In the growth of the Mo/Sn precursor, a peculiar microstructure evolution occurs from solid rods to hollow tubes through a solid-liquid reaction. The MoO₂/Sn composite is restricted within the double carbon layer after subsequent annealing and carbonization that distinctly inherits the morphology of the Mo/Sn precursor. The resulting electrode shows good capacities with hardly any attenuation (925.4 mA h g^-1 after 100 cycles at 100 mA g^-1) and excellent long cycle life (620.1 mA h g^-1 after 1000 cycles at 2 A g^-1). The MoO₂/Sn/NC@NC nanotubes contain the synergistic effect, elaborate core-shell structure, large specific surface areas, and abundant voids. These superiorities not only provide beneficial channels for the electrolyte to fully come into contact with electrode materials and more active sites for redox reactions but also effectively alleviate the volume fluctuation and sustain the electrical connectivity to retain a stable solid-electrolyte interface layer, indeed, bringing about the prominent Li-storage performance. The present study paves a feasible avenue to prepare core-shell structures with high reversible capacity and long-term cycle performance for energy storage devices.

A SnOx Quantum Dots Embedded Carbon Nanocage Network with Ultrahigh Li Storage Capacity

Tin-based materials with high specific capacity have been studied as high-performance anodes for energy storage devices. Herein, a SnO_x (x = 0, 1, 2) quantum dots@carbon hybrid is designed and prepared by a binary oxide-induced surface-targeted coating of ZIF-8 followed by pyrolysis approach, in which SnO_x quantum dots (under 5 nm) are dispersed uniformly throughout the nitrogen-containing carbon nanocage. Each nanocage is cross-linked to form a highly conductive framework. The resulting SnO_x@C hybrid exhibits a large BET surface area of 598 m² g^-1, high electrical conductivity, and excellent ion diffusion rate. When applied to LIBs, the SnO_x@C reveals an ultrahigh reversible capacity of 1824 mAh g^-1 at a current density of 0.2 A g^-1, and superior capacities of 1408 and 850 mAh g^-1 even at high rates of 2 and 5 A g^-1, respectively. The full cell assembled using LiFePO₄ as cathode exhibits the high energy density and power density of 335 Wh kg^-1 and 575 W kg^-1 at 1 C based on the total active mass of cathode and anode. Combined with in situ XRD analysis, the superior electrochemical performance can be attributed to the SnO_x-ZnO-C asynchronous and united lithium storage mechanism, which is formed by the well-designed multifeatured construction composed of SnO_x quantum dots, interconnected carbon network, and uniformly dispersed ZnO nanoparticles. Importantly, this designed synthesis can be extended for the fabrication of other electrode materials by simply changing the binary oxide precursor to obtain the desired active component or modulating the type of MOFs coating to achieve high-performance LIBs.

Encapsulating V2O3 Nanoparticles in Hierarchical Porous Carbon Nanosheets via C-O-V Bonds for Fast and Durable Potassium-Ion Storage

Vanadium oxide (V₂O₃) has been considered as a promising anode material for potassium-ion batteries (PIBs), but challenging as well for the low electron/ion conductivity and poor structural stability. To tackle these issues, herein, a novel sheetlike hybrid nanoarchitecture constructed by uniformly encapsulating V₂O₃ nanoparticles in amorphous carbon nanosheets (V₂O₃@C) with the generation of C-O-V bonding is presented. Such a subtle architecture effectively facilitates the infiltration of electrolyte, relieves the mechanical strain, and reduces the potassium-ion diffusion distance during the repetitive charging/discharging processes. The generated C-O-V bonding not only accelerated charge transfer across the carbon-V₂O₃ interface but also strengthened the structural stability. Benefiting from the synergistic effects, the as-prepared V₂O₃@C nanosheets display fast and durable potassium storage behaviors with a reversible capacity of 116.6 mAh g^-1 delivered at 5 A g^-1, and a specific capacity of 147.9 mAh g^-1 retained after 1800 cycles at a high current density of 2 A g^-1. Moreover, the insertion/extraction mechanism of V₂O₃@C nanosheets in potassium-ion storage is systematically demonstrated by electrochemical analysis and ex situ technologies. This study will shed light on the fabricating of other metal oxides anodes for high-performance PIBs and beyond.

Two-dimensional SnO2 anchored biomass-derived carbon nanosheet anode for high-performance Li-ion capacitors

Lithium-ion capacitors (LICs) combine the advantages of both batteries and supercapacitors; they have attracted intensive attention among energy conversion and storage fields, and one of the key points of their research is the exploration of suitable battery-type electrode materials. Herein, a simple and low-cost strategy is proposed, in which SnO2 particles are anchored on the conductive porous carbon nano-sheets (PCN) derived from coffee grounds. This method can inhibit the grain coarsening of Sn and the volume change of SnO2 effectively, thus improving the electrochemical reversibility of the materials. In the lithium half cell (0-3.0 V vs. Li/Li+), the as-prepared SnO2/PCN electrode yields a reversible capacity of 799 mA h g-1 at 0.1 A g-1 and decent long-term cyclability of 313 mA h g-1 at 1 A g-1 after 500 cycles. The excellent Li+ storage performance of SnO2/PCN is beneficial from the hierarchical structure as well as the robust carbonaceous buffer layer. Besides, a LIC hybrid device with the as-prepared SnO2/PCN anode exhibits outstanding energy and power density of 138 W h kg-1 and 53 kW kg-1 at a voltage window of 1.0-4.0 V. These promising results open up a new way to develop advanced anode materials with high rate and long life.

Methanol-derived high-performance Na3V2(PO4)3/C: from kilogram-scale synthesis to pouch cell safety detection

Na₃V₂(PO₄)₃ (NVP) is regarded as a potential cathode material that can be applied in sodium ion batteries (SIBs) owing to its NASICON structure. However, most of the reported works have focused on the synthesis of materials and the improvement of their electrochemical properties, with little research on the design and safety of pouch cells. Herein, we implemented a cost-saving route to realize the industrial-scale synthesis of NVP cathode materials. The obtained NVP samples possess an impressive Na-ion storage capability with high reversible capacity (116.3 mA h g^-1 at 0.2 C), superior power capability (97.9 mA h g^-1 at 30 C), and long lifespan (71.6% capacity retention after 2500 cycles at 20 C). It was remarkable that industrial-scale NVP/hard carbon (HC) sodium-ion pouch cells could be designed with an 823 mA h discharge capacity at a current of 200 mA (about 0.25 C), and which possess a long life and high rate performance (1000 cycles with a little decay at a current of 4000 mA). Besides, the pouch cells also exhibit excellent thermal stability when demonstrated for application in unmanned aerial vehicles (UAVs), and puncturing experiment results can further prove the excellent safety performance of NVP-hard carbon pouch cells.