Molecule-Induced p-Doping in Perovskite Nanocrystals Enables Efficient Color-Saturated Red Light-Emitting Diodes

Quantum-Confined Perovskite Nanocrystals Enabled by Negative Catalyst Strategy for Efficient Light-Emitting Diodes

The perovskite nanocrystals (PeNCs) are emerging as a promising emitter for light-emitting diodes (LEDs) due to their excellent optical and electrical properties. However, the ultrafast growth of PeNCs often results in large sizes exceeding the Bohr diameter, leading to low exciton binding energy and susceptibility to nonradiative recombination, while small-sized PeNCs exhibit a large specific surface area, contributing to an increased defect density. Herein, Zn2+ ions as a negative catalyst to realize quantum-confined FAPbBr3 PeNCs with high photoluminescence quantum yields (PL QY) over 90%. Zn2+ ions exhibit robust coordination with Br- ions is introduced, effectively retarding the participation of Br- ions in the perovskite crystallization process and thus facilitating PeNCs size control. Notably, Zn2+ ions neither incorporate into the perovskite lattice nor are absorbed on the surface of PeNCs. And the reduced growth rate also promotes sufficient octahedral coordination of PeNC that reduces defect density. The LEDs based on these optimized PeNCs exhibits an external quantum efficiency (EQE) of 21.7%, significantly surpassing that of the pristine PeNCs (15.2%). Furthermore, the device lifetime is also extended by twofold. This research presents a novel approach to achieving high-performance optoelectronic devices.

Dual-Ligand Red Perovskite Ink for Electrohydrodynamic Printing Color Conversion Arrays over 2540 dpi in Near-Eye Micro-LED Display

The lack of stability of red perovskite nanocrystals (PeNCs) remains the main problem that restricts their patterning application. In this work, the dual-ligand passivation strategy was introduced to stabilize PeNCs and inhibit their halogen ion migration during high-voltage electrohydrodynamic (EHD) inkjet printing. The as-printed red arrays exhibit the highest emisson intensity and least blue shift compared with samples with other passivation strategies under a high electric field during EHD inkjet printing. Combining with blue and green PeNC inks, single-color and tricolor color conversion layer arrays were successfully printed, with minimum pixel size of 5 μm and the highest spatial resolution of 2540 dpi. The color coordinate of CsPbBrI2 NCs arrays are located close to the red point, with a color gumat of 97.28% of Rec. 2020 standard. All of these show great potential in the application of color conversion layers in a near-eye micro-LED display.

Dendrimer-Encapsulated Halide Perovskite Nanocrystals for Self-Powered White Light-Emitting Glass

Perovskite nanocrystals (PNCs) have attracted substantial attention due to their inspiring intrinsic merits such as low cost, high performance, and solution processability, but when it comes to the usage of blends of different colored PNCs with the purpose of covering the broadband spectrum field, the high degree of instability remains a major bottleneck. Herein, we report a family of dendritic ammonium ligands that act as stiff shell-encapsulating PNCs for improving their stability and suppressing ion permeability in mixed colloidal PNC solutions. The as-synthesized ligand-encapsulated PNCs notably achieve near-unity photoluminescence quantum yields (PLQYs) and strongly resist the unwanted ion exchange reaction under aggressive anion source attack. To fabricate self-powered white-emitting glass, the stabilized mixed colored PNCs were embedded into the laminated glass, which simultaneously acted as absorbers-emitters for luminescent solar concentrators (LSCs) and emitters for white light-emitting glass.

Ligand-Induced Cation-π Interactions Enable High-Efficiency, Bright, and Spectrally Stable Rec. 2020 Pure-Red Perovskite Light-Emitting Diodes

Achieving high-performance perovskite light-emitting diodes (PeLEDs) with pure-red electroluminescence for practical applications remains a critical challenge because of the problematic luminescence property and spectral instability of existing emitters. Herein, high-efficiency Rec. 2020 pure-red PeLEDs, simultaneously exhibiting exceptional brightness and spectral stability, based on CsPb(Br/I)3 perovskite nanocrystals (NCs) capping with aromatic amino acid ligands featuring cation-π interactions, are reported. It is proven that strong cation-π interactions between the PbI6 -octahedra of perovskite units and the electron-rich indole ring of tryptophan (TRP) molecules not only chemically polish the imperfect surface sites, but also markedly increase the binding affinity of the ligand molecules, leading to high photoluminescence quantum yields and greatly enhanced spectral stability of the CsPb(Br/I)3 NCs. Moreover, the incorporation of small-size aromatic TRP ligands ensures superior charge-transport properties of the assembled emissive layers. The resultant devices emitting at around 635 nm demonstrate a champion external quantum efficiency of 22.8%, a max luminance of 12 910 cd m-2 , and outstanding spectral stability, representing one of the best-performing Rec. 2020 pure-red PeLEDs achieved so far.

Slower Auger Recombination in 12-Faceted Dodecahedron CsPbBr3 Nanocrystals

Over the past two decades, intensive research efforts have been devoted to suppressions of Auger recombination in metal-chalcogenide and perovskite nanocrystals (PNCs) for the application of photovoltaics and light emitting devices (LEDs). Here, we have explored dodecahedron cesium lead bromide perovskite nanocrystals (DNCs), which show slower Auger recombination time compared to hexahedron nanocrystals (HNCs). We investigate many-body interactions that are manifested under high excitation flux density in both NCs using ultrafast spectroscopic pump-probe measurements. We demonstrate that the Auger recombination rate due to multiexciton recombinations are lower in DNCs than in HNCs. At low and intermediate excitation density, the majority of carriers recombine through biexcitonic recombination. However, at high excitation density (>10¹⁸ cm^-3) a higher number of many-body Auger process dominates over biexcitonic recombination. Compared to HNCs, high PLQY and slower Auger recombinations in DNCs are likely to be significant for the fabrication of highly efficient perovskite-based photonics and LEDs.

A Multifunctional "Halide-Equivalent" Anion Enabling Efficient CsPb(Br/I)3 Nanocrystals Pure-Red Light-Emitting Diodes with External Quantum Efficiency Exceeding 23

Pure-red perovskite LEDs (PeLEDs) based on CsPb(Br/I)₃ nanocrystals (NCs) usually suffer from a compromise in emission efficiency and spectral stability on account of the surface halide vacancies-induced nonradiative recombination loss, halide phase segregation, and self-doping effect. Herein, a "halide-equivalent" anion of benzenesulfonate (BS^- ) is introduced into CsPb(Br/I)₃ NCs as multifunctional additive to simultaneously address the above challenging issues. Joint experiment-theory characterizations reveal that the BS^- can not only passivate the uncoordinated Pb²⁺ -related defects at the surface of NCs, but also increase the formation energy of halide vacancies. Moreover, because of the strong electron-withdrawing property of sulfonate group, electrons are expected to transfer from the CsPb(Br/I)₃ NC to BS^- for reducing the self-doping effect and altering the n-type behavior of CsPb(Br/I)₃ NCs to near ambipolarity. Eventually, synergistic boost in device performance is achieved for pure-red PeLEDs with CIE coordinates of (0.70, 0.30) and a champion external quantum efficiency of 23.5%, which is one of the best value among the ever-reported red PeLEDs approaching to the Rec. 2020 red primary color. Moreover, the BS^- -modified PeLED exhibits negligible wavelength shift under different operating voltages. This strategy paves an efficient way for improving the efficiency and stability of pure-red PeLEDs.

Near-Infrared LEDs Based on Quantum Cutting-Activated Electroluminescence of Ytterbium Ions

Cesium lead halide perovskite nanocrystals (PNCs) exhibit promising prospects for application in optoelectronic devices. However, electroactivated near-infrared (NIR) PNC light-emitting diodes (LEDs) with emission peaks over 800 nm have not been achieved. Herein, we demonstrate the electroactivated NIR PNC LEDs based on Yb³⁺-doped CsPb(Cl_1-xBr_x)₃ PNCs with extraordinary high NIR photoluminescence quantum yields over 170%. The fabricated NIR LEDs possess an irradiance of 584.7 μW cm^-2, an EQE of 1.2%, and a turn-on voltage of 3.1 V. The ultrafast quantum cutting process from the PNC host to Yb³⁺ has been revealed as the main mechanism of electroluminescence (EL)-activated Yb³⁺ for the first time via exploring how the trend between the EL intensity of PNC and Yb³⁺ varies with different voltages along with the tendency of temperature- and doping-concentration-dependent PL and EL spectra. This work will extend the application of PNCs to optical communication, night-vision devices, and biomedical imaging.

High-Efficiency Pure-Red Perovskite Quantum-Dot Light-Emitting Diodes

It is still challenging to achieve high-efficiency pure-red (620-650 nm wavelength) perovskite light-emitting diodes (PeLEDs). Herein, we report pure-red PeLEDs with Commission Internationale de l'Eclairage coordinates (0.703, 0.297) meeting the Rec. 2020, an external quantum efficiency of 20.8%, and a luminance of 3775 cd/m². This design is based on the strong quantum confinement CsPbI₃ quantum dots (QDs) capped by composite ligands of 3-phenyl-1-propylamine and tetrabutylammonium iodide. This strategy stabilized the structure of the strong-confined QDs and reduced the influence of the electric field-induced Stark effect on the PeLEDs. Furthermore, the exciton binding energy of the QDs was decreased by the composited ligands to suppress Auger recombination within the devices. Additionally, the valence-band maximum of the QDs was lifted to match the hole-transport layer, thus balancing charge injection in the PeLEDs. Our device also demonstrated a stable electroluminescence spectrum and a lifetime of 5.6 times longer than the control device.

Recent progress of single-halide perovskite nanocrystals for advanced displays

Light-emitting diodes based on lead halide perovskite nanocrystals (LHP NCs) have shown an astonishing increase in efficiency in just several years of academic research, reaching high external quantum efficiencies exceeding 20%. The extensive color-tunability and narrow emission bandwidth of LHP NCs, in particular, are of great importance in the creation of the next generation of ultra-high-definition displays, as defined by the Rec. 2020 standard recommendation. In fact, whereas the colour of LHP NCs can be easily tuned by the compositions of halogens, the ion migration in mixed-halide perovskites under the electric field will seriously affect the spectral stability and operational lifetimes of perovskite light-emitting diodes (PeLEDs). Therefore, it is essential to realize efficient colour-saturated PeLEDs based on single-halide perovskite NCs. In this review, we focus on the recent progress in LHP NC-based PeLEDs and highlight the strategy of tuning the spectral emission based on quantum confinement or cation alloying/doping in single-halide perovskite NCs. Finally, we will give an outlook on future research avenues for preparing high-efficiency pure green, red and blue PeLEDs based on single-halide perovskite NCs.

Encapsulation of Dual-Passivated Perovskite Quantum Dots for Bio-Imaging

Due to their marvelous electrical and optical properties, perovskite nanocrystals have reached remarkable landmarks in solar cells, light-emitting diodes, and photodetectors. However, the intrinsic instability of ionic perovskites, which would undergo an undesirable phase transition and decompose rapidly in ambient humidity, limits their long-term practical deployment. To address this challenge, halogenated trimethoxysilane as the passivation additive is chosen, which utilizes simultaneous halide and silica passivation to enhance the stability of perovskite nanoparticles via a dual-passivation mechanism. The processable nanoparticles show high photoluminescence quantum yield, tunable fluorescence wavelength, and excellent resistance against air and water, highlighting great potential as green to deep-red bio-labels after further phospholipid encapsulation. This work demonstrates that the dual-passivation mechanism could be used to maintain the long-term stability of ionic crystals, which sheds light on the opportunity of halide perovskite nanoparticles for usage in a humid environment.

Spectrally Stable and Efficient Pure Red CsPbI3 Quantum Dot Light-Emitting Diodes Enabled by Sequential Ligand Post-Treatment Strategy

Metal halide perovskites are promising semiconductors for next-generation light-emitting diodes (LEDs) due to their high luminance, excellent color purity, and handily tunable band gap. However, it remains a great challenge to develop perovskite LEDs (PeLEDs) with pure red emission at the wavelength of 630 nm. Herein, we report a spectrally stable and efficient pure red PeLED by employing sequential ligand post-treated CsPbI₃ quantum dots (QDs). The synthesized CsPbI₃ QDs with a size of ∼5 nm are treated in sequential steps using the ligands of 1-hydroxy-3-phenylpropan-2-aminium iodide (HPAI) and tributylsulfonium iodide (TBSI), respectively. The CsPbI₃ QD films exhibit improved optoelectronic properties, which enables the fabrication of a pure red PeLED with a peak external quantum efficiency (EQE) of 6.4% and a stable EL emission centered at the wavelength of 630 nm. Our reported sequential ligand post-treatment strategy opens a new route to improve the stability and efficiency of PeLEDs based on QDs.

Tunable White Light-Emitting Devices Based on Unilaminar High-Efficiency Zn2+-Doped Blue CsPbBr3 Quantum Dots

Perovskite-based white-light-emitting devices (WLEDs) are expected to be the potential candidate for the next-generation lighting field due to their scalability and low-cost process. However, simple and adjustable WLED fabrication technology is in urgent need. Here, WLEDs with a single layer of perovskite quantum dots (PQDs) were constructed by combining Zn²⁺-doped CsPbBr₃ PQDs with exciplex emission between poly(9-vinylcarbazole) (PVK) and ((1-phenyl-1H-benzimidazol-2-yl)benzene)) (TPBi). Zn²⁺-doped CsPbBr₃ PQDs with polar ion shells were prepared by means of low temperature and post-treatment. The photoluminescence quantum yield (PLQY) can reach as high as 95.9% at the emission wavelength of 456 nm. The blue shift of its PL (∼60 nm) is much greater than that of other reported Zn²⁺-doped CsPbBr₃ PQDs (5-10 nm), thus realizing the true blue-emission Zn²⁺-doped CsPbBr₃ PQDs. As a result, just by controlling the thickness of TPBi, the adjustment of cold (CIE (0.2531, 0.2502)) and warm WLEDs (CIE (0.3561, 0.3562)) is realized for the first time.

Smoothing the energy transfer pathway in quasi-2D perovskite films using methanesulfonate leads to highly efficient light-emitting devices

Quasi-two-dimensional (quasi-2D) Ruddlesden–Popper (RP) perovskites such as BA₂Cs_n–1Pb_nBr_3n+1 (BA = butylammonium, n > 1) are promising emitters, but their electroluminescence performance is limited by a severe non-radiative recombination during the energy transfer process. Here, we make use of methanesulfonate (MeS) that can interact with the spacer BA cations via strong hydrogen bonding interaction to reconstruct the quasi-2D perovskite structure, which increases the energy acceptor-to-donor ratio and enhances the energy transfer in perovskite films, thus improving the light emission efficiency. MeS additives also lower the defect density in RP perovskites, which is due to the elimination of uncoordinated Pb²⁺ by the electron-rich Lewis base MeS and the weakened adsorbate blocking effect. As a result, green light-emitting diodes fabricated using these quasi-2D RP perovskite films reach current efficiency of 63 cd A⁻¹ and 20.5% external quantum efficiency, which are the best reported performance for devices based on quasi-2D perovskites so far.

Owing to large exciton binding energy, quasi-2D perovskite is promising for light-emitting application, yet inhomogeneous phases distribution limits the potential. Here, the authors improve the performance by using MeS additive to regulate the phase distribution and to reduce defect density in the films.

Phenylalkylammonium passivation enables perovskite light emitting diodes with record high-radiance operational lifetime: the chain length matters

Perovskite light emitting diodes suffer from poor operational stability, exhibiting a rapid decay of external quantum efficiency within minutes to hours after turn-on. To address this issue, we explore surface treatment of perovskite films with phenylalkylammonium iodide molecules of varying alkyl chain lengths. Combining experimental characterization and theoretical modelling, we show that these molecules stabilize the perovskite through suppression of iodide ion migration. The stabilization effect is enhanced with increasing chain length due to the stronger binding of the molecules with the perovskite surface, as well as the increased steric hindrance to reconfiguration for accommodating ion migration. The passivation also reduces the surface defects, resulting in a high radiance and delayed roll-off of external quantum efficiency. Using the optimized passivation molecule, phenylpropylammonium iodide, we achieve devices with an efficiency of 17.5%, a radiance of 1282.8 W sr-1 m-2 and a record T50 half-lifetime of 130 h under 100 mA cm-2.