Ag2 S-CdS p-n Nanojunction-Enhanced Photocatalytic Oxidation of Alcohols to Aldehydes

P-N Heterojunction Embedded CuS/TiO2 Bifunctional Photocatalyst for Synchronous Hydrogen Production and Benzylamine Conversion

The coupling of photocatalytic hydrogen production and selective oxidation of benzylamine is a topic of significant research interest. However, enhancing the bifunctional photocatalytic activity in this context is still a major challenge. The construction of Z-scheme heterojunctions is an effective strategy to enhance the activity of bifunctional photocatalysts. Herein, a p-n type direct Z-scheme heterojunction CuS/TiO2 is constructed using metal-organic framework (MOF)-derived TiO2 as a substrate. The carrier density is measured by Mott-Schottky under photoexcitation, which confirms that the Z-scheme electron transfer mode of CuS/TiO2 is driven by the diffusion effect caused by the carrier concentration difference. Benefiting from efficient charge separation and transfer, photogenerated electrons, and holes are directedly transferred to active oxidation and reduction sites. CuS/TiO2 also exhibits excellent bifunctional photocatalytic activity without noble metal cocatalysts. Among them, the H2 evolution activity of the CuS/TiO2 is found to be 17.1 and 29.5 times higher than that of TiO2 and CuS, respectively. Additionally, the yields of N-Benzylidenebenzylamine (NBB) are 14.3 and 47.4 times higher than those of TiO2 and CuS, respectively.

Immobilization of Enzymes on Cyclodextrin-Anchored Dehiscent Mesoporous TiO2 for Efficient Photoenzymatic Hydroxylation

A three-in-one heterogeneous catalyst (UPO@dTiO₂-CD) was fabricated by grafting cyclodextrins (CDs) on the dehiscent TiO₂ (dTiO₂) surface and subsequently immobilizing unspecific peroxygenase (rAaeUPO), which exhibited double enhanced electron/mass transfer in photo-enzymatic enantioselective hydroxylation of the C-H bond. The tunable anatase/rutile phase ratio and dehiscent mesoporous architectures of dTiO₂ and the electron donor feature and hydrophobic inner cavity of the CDs are independently responsible for accelerating both electron and mass transfer. The coordination of the photocatalytic and enzymatic steps was achieved by structural and compositional regulation. The optimized UPO@dTiO₂-CD not only displayed high catalytic efficiency (turnover number and turnover frequency of rAaeUPO up to >65,000 and 91 min^-1, respectively) but also exhibited high stability and reusability.

Self-Assembly of Matchstick-Shaped Inorganic Nano-Surfactants with Controlled Surface Amphiphilicity

Molecular and nanoscale amphiphiles have been extensively studied as building blocks for organizing macroscopic matter through specific and local interactions. Among various amphiphiles, inorganic Janus nanoparticles have attracted a lot of attention owing to their ability to impart multifunctionalities, although the programmability to achieve complicated self-assembly remains a challenge. Here, we synthesized matchstick-shaped Janus nano-surfactants that mimic organic surfactant molecules and studied their programmable self-assembly. High amphiphilicity was achieved through the hard-soft acid-base-based ligand-exchange reaction with strong selectivity on the surface of nano-matchsticks consisting of Ag₂S heads and CdS stems. The obtained nano-surfactants spontaneously assembled into diverse ordered structures such as lamellar, curved, wrinkled, cylindrical, and micellar structures depending on the vertical asymmetry and the interfacial tension controlled by their geometry and surface ligands. The correlation between the phase selectivity of suprastructures and the characteristics of nano-surfactants is discussed. This study realized the molecular amphiphile-like programmability of inorganic Janus nanostructures in self-assembly with the precise control on the surface chemistry.

Specific-Tuning Band Structure in Hetero-Semiconductor Nanorods to Match with Reduction of Oxygen Molecules for Low-Intensity Yet Highly Effective Sonodynamic/Hole Therapy of Tumors

Sonosensitizers-assisted sonodynamic therapy (SDT) has been emerging as a promising treatment for cancers, and yet few specific regulations of band structure of sonosensitizers have been reported in relation to oxygen in tissues. Herein, by a gradient doping technique to modulate the band structure of hetero-semiconductor nanorods, it is found that the reduction potential of band-edge is very critical to reactive oxygen species (ROS) production under low-intensity ultrasound (US) irradiation and particularly, when aligned with the reduction of oxygen, ROS generation is found to be most significantly enhanced. Withal, US-generated oxidation holes are found to be effective in consuming overexpressed glutathione in tumor lesions, which amplifies cellular oxidative stress and finally induces tumor cell death. Moreover, the intrinsic fluorescence property of semiconductors provides imaging capability to illumine tumor area and guide the SDT process. This study demonstrates that the reduction potential state of sonosensitizers is of crucial importance in ROS generation and the proposed reduction potential-tailored hetero-semiconductor nanorods materialize low-intensity US irradiation yet highly effective SDT and synergetic hole therapy of tumors with imaging guidance and reduced radiation injury.

Construction of Ultrafine Ag2S NPs Anchored onto 3D Network Rodlike Bi2SiO5 and Insight into the Photocatalytic Mechanism

A novel three-dimensional (3D) network rodlike Ag₂S/Bi₂SiO₅ photocatalyst with a p-n heterostructure composed of ultrafine Ag₂S nanoparticles (NPs) and Bi₂SiO₅ nanosheets was prepared using an anionic self-regulation strategy by a two-step hydrothermal process. The architecture facilitated the efficient transfer and separation of photogenerated electron-hole pairs. The optimal Ag₂S/Bi₂SiO₅ composite (ABSO_0.10) exhibited an excellent reduction activity (93.5% Cr(VI) removal in wastewater containing 50 mg·L^-1 Cr(VI) within 90 min under visible light), which was about 11.2 and 25.6 times higher than that of the pristine Ag₂S and virgin Bi₂SiO₅, respectively. Assisted by experiments and density functional theory (DFT) calculations, a possible photocatalytic mechanism for Cr(VI) reduction over the Ag₂S/Bi₂SiO₅ composite under visible-light irradiation was proposed.

Self-Assembled Zeolitic Imidazolate Framework/CdS Hollow Microspheres with Efficient Charge Separation for Enhanced Photocatalytic Hydrogen Evolution

Enhanced interfacial charge separation is of great importance to high-efficiency photocatalytic hydrogen production. Herein, we successfully fabricated novel ZIF-67/CdS hollow sphere (HS) and ZIF-8/CdS HS heterostructures through an in situ self-assembly process, in which ZIF-67 and ZIF-8 are closely coated on CdS HSs to form "double-shell"-like structures. This hierarchical heterostructure with porous outer layers on the surface of CdS HSs can expose accessible active sites and possess close contact. Upon visible-light illumination, the optimal proportion of ZIF-67/CdS HS displays a hydrogen generation rate of 1721 μmol g^-1 h^-1, which is 11.9 and 3.1 times higher than that of a pure CdS HS (145 μmol g^-1 h^-1) and ZIF-8/CdS HS (555 μmol g^-1 h^-1), respectively. The proposed photocatalytic mechanism is explored: ZIF-8/CdS HS follows the type-II mechanism, and ZIF-67/CdS HS follows the Z-scheme mechanism. The reason for the higher photocatalytic activity of ZIF-67/CdS HS is that ZIF-67 not merely with a porous structure facilitates the diffusion of H₂ gas, but with a well-matched band structure promotes charge transfer and separation.

Radical-Mediated C-C Coupling of Alcohols Induced by Plasmonic Hot Carriers

The C-C coupling reactions of aliphatic alcohols to aromatics and larger-mass compounds have large endothermicities and activation energies, calling for catalysts operating at high temperatures. Here, we demonstrate that plasmon-excited nanoparticles catalyze the C-C coupling of aliphatic alcohols at room temperature to produce polyaromatic hydrocarbons and graphene oxide. The conversion is quenched by radical and electron scavengers and by the surface passivation of metals, suggesting that the reaction proceeds through alkoxy, peroxyl, hydroxyalkyl, and alkyl radical intermediates created by the metal to molecule transfer of plasmonic hot carriers. Besides being the first realization of C-C coupling of aliphatic alcohols at room temperature, the result constitutes a rare example of an endothermic plasmon-induced reaction producing new bonds and a new method for photogenerating graphene derivatives. More importantly, the result demonstrates the facile generation of organic radicals directly from alcohols, which may be used as precursors for radical-based organic reactions.

Selective photocatalytic aerobic oxidation of methane into carbon monoxide over Ag/AgCl@SiO2

Design of active catalysts for chemical utilization of methane under mild conditions is of great importance, but remains a challenging task. Here, we prepared a Ag/AgCl with SiO₂ coating (Ag/AgCl@SiO₂) photocatalyst for methane oxidation to carbon monoxide. High carbon monoxide production (2.3 μmol h⁻¹) and high selectivity (73%) were achieved. SiO₂ plays a key role in the superior performance by increasing the lifetime of the photogenerated charge carriers. Based on a set of semi in situ infrared spectroscopy, electron paramagnetic resonance, and electronic property characterization studies, it is revealed that CH₄ is effectively and selectively oxidized to CO by the in situ formation of singlet ¹O₂via the key intermediate of COOH*. Further study showed that the Ag/AgCl@SiO₂ catalyst could also drive valuable conversion using real sunlight under ambient conditions. As far we know, this is the first work on the application of SiO₂ modified Ag/AgCl in the methane oxidation reaction.

The Ag/AgCl@SiO₂ catalyst exhibits excellent photocatalytic activity in selective aerobic oxidation of methane to carbon monoxide with high selectivity, and extended real light simulation feasibility shows potential in practical application.

Synthesis of Ni modified Au@CdS core-shell nanostructures for enhancing photocatalytic coproduction of hydrogen and benzaldehyde under visible light

The development of visible light responsive photocatalysts for simultaneous production of hydrogen (H₂) fuel and value-added chemicals is greatly promising to solve the energy and environmental issues by improving the utilization efficiency of solar energy. Herein, the three-component Ni/(Au@CdS) core-shell nanostructures were constructed by the hydrothermal synthesis followed with photodeposition. The intimate integration of plasmonic Au nanospheres and visible-light responsive CdS shells modified with Ni cocatalyst facilitated the generation and separation of electron-hole pairs as well as reduced the overpotential of hydrogen evolution. The Ni/(Au@CdS) photocatalyst exhibited excellent performance toward the selective transformation of benzyl alcohol under anaerobic conditions, and the yields of H₂ and benzaldehyde reached up to 3882 and 4242 μmol·g^-1·h^-1, respectively. The apparent quantum efficiency (AQE) was determined to be 4.09% under the irradiation of 420 nm. The systematic studies have verified the synergy of plasmonic effect and metal cocatalyst on enhancing the photocatalysis. This work highlights the desirable design and potential application of plasmonic photocatalysts for solar-driven coproduction of H₂ fuel and high-value chemicals.

Polyaniline/Ag2S–CdS Nanocomposites as Efficient Electrocatalysts for Triiodide Reduction in Dye-Sensitized Solar Cells

In this study, an Ag2S–CdS nanocomposite (AC11) was prepared through chemical co-precipitation of silver nitrate and cadmium acetate in an aqueous solution of thiourea. We then synthesized PACI, a nanocomposite of polyaniline (PANI) and AC11, through in situ polymerization of aniline in an AC11-containing solution, resulting in uniform embedding of the AC11 nanoparticles in the PANI fibers. Moreover, we synthesized the nanocomposite PACO through deposition of the AC11 nanoparticles on the surface of the PANI fibers. PANI, PACI, and PACO were then spin-coated onto conducting glasses to form PANI-S, PACI-S, and PACO-S counter electrodes, respectively, for dye-sensitized solar cells (DSSCs). Cyclic voltammetry revealed that the electrochemical catalytic activity of the PACI-S electrode was much higher than those of the PANI-S and PACO-S electrodes. Furthermore, the photovoltaic properties of the PACI-S-based DSSC were much better than those of the PANI-S- and PACO-S-based DSSCs. Indeed, the highest short-circuit current density (12.06 mA/cm2), open-circuit voltage (0.72 V), fill factor (0.58), and photoenergy conversion efficiency (5.04%) were those of the DSSC featuring PACI-S as the counter electrode.

Visible-Light-Mediated Oxidative Amidation of Aldehydes by Using Magnetic CdS Quantum Dots as a Photocatalyst

A magnetic CdS quantum dot (Fe₃ O₄ /polydopamine (PDA)/CdS) was synthesized through a facile and convenient method from inexpensive starting materials. Characterization of the prepared catalyst was performed by means of FTIR spectroscopy, XRD, SEM, TEM, energy-dispersive X-ray spectroscopy, and vibrating-sample magnetometer techniques. Fe₃ O₄ /PDA/CdS was found to be a highly active photocatalyst for the amidation of aromatic aldehydes by using air as a clean oxidant under mild conditions. The photocatalyst can be recovered by magnetic separation and successfully reused for five cycles without considerable loss of its catalytic activity.

A porphyrin-conjugated TiO2/CoFe2O4 nanostructure photocatalyst for the selective production of aldehydes under visible light

A ZnTCPP-TiO₂/CoFe₂O₄ nanohybrid easily reusable using a permanent magnet without losing its reactivity for the selective production of aldehydes from a mechanistic point of view.

Improving the photocatalytic activity of benzyl alcohol oxidation by Z-scheme SnS/g-C3N4

The formation of the Z-scheme heterojunction between SnS and g-C₃N₄ facilitates the separation of electrons and holes, thereby increasing the conversion of benzyl alcohol.