Fluorine Triggered Surface and Lattice Regulation in Anatase TiO2- x Fx Nanocrystals for Ultrafast Pseudocapacitive Sodium Storage

Zero-Strain Sodium Lanthanum Titanate Perovskite Embedded in Flexible Carbon Fibers as a Long-Span Anode for Lithium-Ion Batteries

"High-capacity" graphite and "zero-strain" spinel Li4Ti5O12 (LTO) occupy the majority market of anode materials for Li+ storage in commercial applications. Nevertheless, their intrinsic drawbacks including the unsafe potential of graphite and unsatisfactory capacity of LTO limit the further development of lithium-ion batteries (LIBs), which is unable to satisfy the ever-increasing demands. Here, a novel Na0.35La0.55TiO3 perovskite embedded in multichannel carbon fibers (NLTO-NF) is rationally designed and synthesized through an electrospinning method. It not only has the advantages of a respectable specific capacity of 265 mAh g-1 at 0.1 A g-1 and superb rate capability, but it also possesses the zero-strain characteristic. Impressively, an ultralong cycling life with 96.3% capacity retention after 9000 cycles at 2 A g-1 is achieved in the half cell, and 90.3% of capacity retention ratio is obtained after even 2500 cycles at 1 A g-1 in the coupled LiFePO4/NLTO-NF full cell. This study introduces a new member with excellent performance to the zero-strain materials family for next-generation LIBs.

Suppressed Layered-to-Spinel Phase Transition in δ-MnO2 via van der Waals Interaction for Highly Stable Zn/MnO2 Batteries

Although birnessite-type manganese dioxide (δ-MnO₂ ) with a large interlayer spacing (≈7 Å) is a promising cathode candidate for aqueous Zn/MnO₂ batteries, the poor structural stability associated with Zn²⁺ intercalation/deintercalation limits its further practical application. Herein, δ-MnO₂ ultrathin nanosheets are coupled with reduced graphene oxide (rGO) via van der Waals (vdW) self-assembly in a vacuum freeze-drying process. It is interesting to find that the presence of vdW interaction between δ-MnO₂ and rGO can effectively suppress the layered-to-spinel phase transition in δ-MnO₂ during cycling. As a result, the coupled δ-MnO₂ /rGO hybrid cathode with a sandwich-like heterostructure exhibits remarkable cycle performance with 80.1% capacity retained after 3000 cycles at 2.0 A g^-1 . The first principle calculations demonstrate that the strong interfacial interaction between δ-MnO₂ and rGO results in improved electron transfer and strengthened layered structure for δ-MnO₂ . This work establishes a viable strategy to mitigate the adverse layered-to-spinel phase transition in layered manganese oxide in aqueous energy storage systems.

Mesoporous Single-Crystal Lithium Titanate Enabling Fast-Charging Li-Ion Batteries

There remain significant challenges in developing fast-charging materials for lithium-ion batteries (LIBs) due to sluggish ion diffusion kinetics and unfavorable electrolyte mass transportation in battery electrodes. In this work, a mesoporous single-crystalline lithium titanate (MSC-LTO) microrod that can realize exceptional fast charge/discharge performance and excellent long-term stability in LIBs is reported. The MSC-LTO microrods are featured with a single-crystalline structure and interconnected pores inside the entire single-crystalline body. These features not only shorten the lithium-ion diffusion distance but also allow for the penetration of electrolytes into the single-crystalline interior during battery cycling. Hence, the MSC-LTO microrods exhibit unprecedentedly high rate capability, achieving a specific discharge capacity of ≈174 mAh g^-1 at 10 C, which is very close to its theoretical capacity, and ≈169 mAh g^-1 at 50 C. More importantly, the porous single-crystalline microrods greatly mitigate the structure degradation during a long-term cycling test, offering ≈92% of the initial capacity after 10 000 cycles at 20 C. This work presents a novel strategy to engineer porous single-crystalline materials and paves a new venue for developing fast-charging materials for LIBs.

Nanostructure and Advanced Energy Storage: Elaborate Material Designs Lead to High-Rate Pseudocapacitive Ion Storage

The drastic need for development of power and electronic equipment has long been calling for energy storage materials that possess favorable energy and power densities simultaneously, yet neither capacitive nor battery-type materials can meet the aforementioned demand. By contrast, pseudocapacitive materials store ions through redox reactions with charge/discharge rates comparable to those of capacitors, holding the promise of serving as electrode materials in advanced electrochemical energy storage (EES) devices. Therefore, it is of vital importance to enhance pseudocapacitive responses of energy storage materials to obtain excellent energy and power densities at the same time. In this Review, we first present basic concepts and characteristics about pseudocapacitive behaviors for better guidance on material design researches. Second, we discuss several important and effective material design measures for boosting pseudocapacitive responses of materials to improve rate capabilities, which mainly include downsizing, heterostructure engineering, adding atom and vacancy dopants, expanding interlayer distance, exposing active facets, and designing nanosheets. Finally, we outline possible developing trends in the rational design of pseudocapacitive materials and EES devices toward high-performance energy storage.

A Low-Voltage Layered Na2 TiGeO5 Anode for Lithium-Ion Battery

Titanium-based anode materials have achieved much progress with the wide studies in lithium-ion batteries. However, these known materials usually possess high discharge voltage platforms and limited energy densities. Herein, a titanium-based oxide of Na₂ TiGeO₅ with layered structure, two-dimensional lamellar frame and exposed highly active (001) facet, exhibiting good electrochemical performance in terms of high capacity (410 mAh g^-1 with a current density of 50 mA g^-1 ), excellent rate capability and cycling stability with no obvious capacity attenuation after 4000 cycles, is reported. The appropriate discharge voltage plateau at around 0.2 V endows the Na₂ TiGeO₅ anode material high security compared with graphite and high energy density compared with spinel Li₄ Ti₅ O₁₂ . Combining the electrochemical tests and the density functional theory calculations, the Li⁺ storage mechanism of Na₂ TiGeO₅ is elucidated and the conversion reaction process is revealed. More importantly, this study provides a way to develop low-voltage and high-capacity titanium-based anode materials for efficient energy storage.

Development of a Lightweight LTO/Cu Electrode as a Flexible Anode via Etching Process for Lithium-Ion Batteries

In recent years, flexible energy storage devices have attracted the growing demand for flexible electronic systems. Therefore, research on reliable electrodes with high mechanical flexibility and good electronic and lithium-ion conductivity has become critical. Carbon-coated Li₄Ti₅O₁₂ (LTO) nanostructures find essential applications in high-performance lithium-ion batteries (LiBs). Nevertheless, the conventional copper current collector with a thickness of several micrometers accounts for a large proportion of the LiB, making the low-energy density LiB with much less flexibility. Here, hundred nm-thick (LTO/Cu) copper foil-LTO nanostructures are fabricated using a scalable and straightforward process which can be assembled into a film into a flexible, lightweight electrode by etching a conventional copper foil to form an ultra-thin copper layer for LIBs (<1 μm). This process provides essential flexibility to the as-prepared electrode and provides template support for simple fabrication. The LiB cell using the novel LTO/Cu as the anode exhibits an energy capacity of 123 mA h/g during 40 charge-discharge cycles at a 0.1C rate. Besides, the coulombic efficiency of the LiB using LTO/Cu remains over 99% after 40 cycles. These results show the uses of this novel anode and its potential in high-density and flexible commercial lithium-ion batteries.

Reversible Zn2+ Insertion in Tungsten Ion-Activated Titanium Dioxide Nanocrystals for Electrochromic Windows

Zinc-anode-based electrochromic devices (ZECDs) are emerging as the next-generation energy-efficient transparent electronics. We report anatase W-doped TiO₂ nanocrystals (NCs) as a Zn²⁺ active electrochromic material. It demonstrates that the W doping in TiO₂ highly reduces the Zn²⁺ intercalation energy, thus triggering the electrochromism. The prototype ZECDs based on W-doped TiO₂ NCs deliver a high optical modulation (66% at 550 nm), fast spectral response times (9/2.7 s at 550 nm for coloration/bleaching), and good electrochemical stability (8.2% optical modulation loss after 1000 cycles).