Periodic Micropillar-Patterned FTO/BiVO4 with Superior Light Absorption and Separation Efficiency for Efficient PEC Performance

Structural Engineering of BiVO4 /CoFe MOF Heterostructures Boosting Charge Transfer for Efficient Photoelectrochemical Water Splitting

Boosting charge separation and transfer of photoanodes is crucial for providing high viability of photoelectrochemical hydrogen (H₂ ) generation. Here, a structural engineering strategy is designed and synthesized for uniformly coating an ultrathin CoFe bimetal-organic framework (CoFe MOF) layer over a BiVO₄ photoanode for boosted charge separation and transfer. The photocurrent density of the optimized BiVO₄ /CoFe MOF(NA) photoanode reaches a value of 3.92 mA cm^-2 at 1.23 V versus reversible hydrogen electrode (RHE), up to 6.03 times that of pristine BiVO₄ , due to the greatly increased efficiency of charge transfer and separation. In addition, this photoanode records one onset potential that is considerably shifted negatively when compared to BiVO₄ . Transient absorption spectroscopy reveals that the CoFe MOF(NA) prolongs charge recombination lifetime by blocking the hole-transfer pathway from the BiVO₄ to its surface trap states. This work sheds light on boosting charge separation and transfer through structural engineering to enhance the photocurrent of photoanodes for solar H₂ production.

Hierarchical Co-Pi Clusters/Fe2O3 Nanorods/FTO Micropillars 3D Branched Photoanode for High-Performance Photoelectrochemical Water Splitting

In this study, an efficient hierarchical Co-Pi cluster/Fe₂O₃ nanorod/fluorine-doped tin oxide (FTO) micropillar three-dimensional (3D) branched photoanode was designed for enhanced photoelectrochemical performance. A periodic array of FTO micropillars, which acts as a highly conductive "host" framework for uniform light scattering and provides an extremely enlarged active area, was fabricated by direct printing and mist-chemical vapor deposition (CVD). Fe₂O₃ nanorods that act as light absorber "guest" materials and Co-Pi clusters that give rise to random light scattering were synthesized via a hydrothermal reaction and photoassisted electrodeposition, respectively. The hierarchical 3D branched photoanode exhibited enhanced light absorption efficiency because of multiple light scattering, which was a combination of uniform light scattering from the periodic FTO micropillars and random light scattering from the Fe₂O₃ nanorods. Additionally, the large surface area of the 3D FTO micropillar, together with the surface area provided by the one-dimensional Fe₂O₃ nanorods, contributed to a remarkable increase in the specific area of the photoanode. Because of these enhancements and further improvements facilitated by decoration with a Co-Pi catalyst that enhanced water oxidation, the 3D branched Fe₂O₃ photoanode achieved a photocurrent density of 1.51 mA cm^-2 at 1.23 V_RHE, which was 5.2 times higher than that generated by the non-decorated flat Fe₂O₃ photoanode.

Effect of La2O3 on Microstructure and Properties of Laser Cladding SMA Coating on AISI 304 Stainless Steel

Known as having a stress self-accommodation characteristic, the laser cladding shape memory alloy (SMA) coatings have been widely used in material failure repair. Nevertheless, their further development is greatly limited by their low microhardness (250 HV0.2) and corrosion resistance. Benefiting from the capability of refined grain and adjusted microstructure, rare earth oxides play a key role in improving the properties of materials. Herein, to improve the microhardness and anti-corrosion of laser cladding SMA coatings, different amounts of La2O3 were doped in SMA coating. The influence of the different La2O3 doping amounts on the phases, grain size and microhardness was studied. The anti-corrosion of the SMA/La2O3 composite coating was explored in 3.5 wt.% sodium chloride solution. Results showed that the grain of the SMA/La2O3 composite coating is significantly refined. When doping with 0.9 wt.%, the refinement rate reaches 19%. Furthermore, based on the Hall–Petch effect, the microhardness of the SMA/La2O3 composite coating is increased to 450 HV0.2. At the same time, the anti-corrosion of the composite coating is enhanced due to the smaller grain size and fewer defects.

Host/Guest Nanostructured Photoanodes Integrated with Targeted Enhancement Strategies for Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) hydrogen production from water splitting is a green technology that can solve the environmental and energy problems through converting solar energy into renewable hydrogen fuel. The construction of host/guest architecture in semiconductor photoanodes has proven to be an effective strategy to improve solar-to-fuel conversion efficiency dramatically. In host/guest photoanodes, the absorber layer is deposited onto a high-surface-area electron collector, resulting in a significant enhancements in light-harvesting as well as charge collection and separation efficiency. The present review aims to summarize and highlight recent state-of-the-art progresses in the architecture designing of host/guest photoanodes with integrated enhancement strategies, including i) light trapping effect; ii) optimization of conductive host scaffolds; iii) hierarchical structure engineering. The challenges and prospects for the future development of host/guest nanostructured photoanodes are also presented.

A flexible photoelectrochemical aptasensor using heterojunction architecture of α-Fe2O3/d-C3N4 for ultrasensitive detection of penbritin

The performance of photoelectrochemical (PEC) analysis system relies closely on the properties of the photoelectric electrodes. It is of great significance to integrate photoactive materials with flexible substrates to construct ultra-sensitive PEC sensors for practical application. This work reports a novel photoelectrode developed by immobilizing α-Fe₂O₃ nanoparticles (NPs)/defect-rich carbon nitride (d-C₃N₄), an excellent Z-scheme heterojunction photoelectric material, onto three-dimensional (3D) flexible carbon fiber textile. Specifically, 3D hierarchical structure of flexible carbon fiber textile provides larger specific surface area and higher mechanical strength than traditional electrodes, resulting in more reaction sites and faster reaction kinetics to achieve signal amplification. Simultaneously, α-Fe₂O₃/d-C₃N₄ Z-scheme heterojunction exhibits enhanced light absorption capability and high redox ability, thus dramatically improving the PEC performance. This photoelectrode was used to construct a flexible PEC aptasensor for ultrasensitive detection of penbritin, demonstrating excellent performance in terms of wide linear range (0.5 pM-50 nM), low detection limit (0.0125 pM) and high stability. The design principle is applicable to the manufacture of other photoelectric sensing systems, which provides an avenue for the development of portable environmental analysis and field diagnostics equipment.