Smart Adsorbents for Aquatic Environmental Remediation

Remediation of Safranin-O and Acid Fuchsin by Using Ti3C2 MXene /rGo-Cu2O Nanocomposite: Preparation, Characterization, Isotherm, Kinetics and Thermodynamic Studies

In recent years, MXene has become one of the most intriguing two-dimensional layered (2Dl) materials extensively explored for various applications. In this study, a Ti3C2 MXene/rGo-Cu2O Nanocomposite (TGCNCs) was developed to eliminate Safranin-O effectively (SO) and Acid Fuchsin (AF) as cationic dyes from the aquatic environment. Multistep was involved in the preparation of the adsorbent system, including the Preparation of Ti3C2, after that, GO synthesis by the Humer method, followed by rGO production, then added CuSO4 to obtain a final Nanocomposite (NCs) called "TGCNCs". The structure of TGCNCs can be varied in several ways, including FTIR, SEM, TGA, Zeta, EDX, XRD, and BET, to affirm the efficacious preparation of TGCNCs. A novel adsorbent system was developed to remove SO and AF, both cationic dyes. Various adsorption conditions have been optimized through batch adsorption tests, including the pH of the solution (4-12), the effect of dosage (0.003-0.03 g), the impact of the contact time (5-30 min), and the effect of beginning dye concentration (25-250 mg/L). Accordingly, the TGCNCs exhibited excellent fitting for Freundlich isotherm mode, resulting in maximum AF and SO adsorption capacities of 909.09 and 769.23 mg.g-1. This research on adsorption kinetics suggests that a pseudo-second-order (PSO) model would fit well with the experimental data ( = 0.998 and = 0.990). It is evident from the thermodynamic parameters that adsorption is an endothermic process that is spontaneous and favourable. During the adsorption of SO and AF onto NCs, it is hypothesized that these molecules interact intramolecularly through stacking interactions, H-bond interactions, electrostatic interactions, and entrapment within the polymeric Poros structure nanocomposite. Regeneration studies lasting up to five cycles were the most effective for both organic dyes under study.

An Evolutionary Review of Hemoperfusion Adsorbents: Materials, Preparation, Functionalization, and Outlook

Accumulation of pathogenic factors in the blood may cause irreversible damage and may even be life-threatening. Hemoperfusion is an effective technique for eliminating pathogenic factors, which is widely used in the treatment of various diseases including liver failure, renal failure, sepsis, and others. Hemoperfusion adsorbents are crucial in this process as they specifically bind and remove the target pathogenic factors. This review describes the development of hemoperfusion adsorbents, detailing the different properties exhibited by inorganic materials, organic polymers, and new materials. Advances in natural and synthetic polymers and novel materials manufacturing techniques have driven the expansion of hemoperfusion adsorbents in clinical applications. Stimuli-responsive (smart responsive) adsorbents with controllable molecular binding properties have many promising and environmentally friendly biomedical applications. Knowledge gaps, future research directions, and prospects for hemoperfusion adsorbents are discussed.

Dual stimulus-responsive renewable nanoadsorbent for selective adsorption of low-density lipoprotein in serum

Selective removal of ultra-high low-density lipoprotein (LDL) from the blood of hyperlipemia patients using hemoperfusion is considered an efficient method to prevent the deterioration of atherosclerotic cardiovascular disease. Based on the exceptional structure-function properties of multistimulus-responsive materials, we developed a magnetic photorenewable nanoadsorbent (Fe3O4@SiO2@Azo-COOH) with outstanding selectivity and regenerative characteristics, featuring functionalized azobenzene as the ligand. The dual-stimulus response endowed Fe3O4@SiO2@Azo-COOH with rapid separation and photoregenerative properties. The adsorbent demonstrated excellent removal efficiency of LDL with an adsorption capacity of 15.06 mg/g, and highly repetitive adsorption performance (≥5 cycles) under irradiation. Fe3O4@SiO2@Azo-COOH also exhibited remarkable adsorption properties and selectivity in human serum, with adsorption capacities of 10.93, 21.26 and 9.80 mg/g for LDL, total cholesterol and triglycerides and only 0.77 mg/g for high-density lipoprotein (HDL), resulting in a 93% selective adsorption difference (LDL/HDL). Complete green regeneration of the nanoadsorbent was achieved through a simple regeneration process, maintaining a recovery rate of 99.4% after five regeneration experiments. By combining dynamic perfusion experiment with micromagnetic microfluidics, the LDL content decreased by 16.6%. Due to its superior adsorption capacity and regenerative properties, the dual stimulus-responsive nanosorbent is considered a potential hemoperfusion adsorbent.

On the adsorption characteristics and mechanism of methylene blue by ball mill modified biochar

In this study, modified biochar (BRB) was prepared from rice straw by ball milling technique and used for the adsorption of methylene blue (MB) in wastewater. The BRB was characterized by SEM, FTIR and XPS, and the adsorption model and Box-Behnken design were used to optimize the five influencing factors. The results showed that the ball milling technique could increase the content of functional groups (-OH, C=C and C-O, etc.) and aromatic structures on the surface of biochar, thus facilitating the removal of MB. The isotherm model was consistent with the Langmuir adsorption model (R2 = 0.947) and the maximum adsorption capacity was 50.27 mg/g. The adsorption kinetics was consistent with the pseudo-second-order kinetic model (R2 = 1) and the adsorption rate was mainly controlled by chemisorption. The thermodynamic model confirmed that the adsorption process was a spontaneous heat absorption reaction. The maximum adsorption efficiency was 99.78% under the optimal conditions (40℃, pH 8, reaction time = 90 min, dosing amount = 0.1 mg), and the adsorption efficiency could be improved by increasing the pH and BRB dosing amount. The surface functional groups and crystal structure properties of BRB were the main determinants of adsorption, and it was clarified that physical adsorption, electrostatic attraction and π-π interaction were the main mechanisms for the adsorption of MB by BRB. The main mechanisms were clarified. Therefore, BRB is an economic, efficient and green adsorption material with good potential for the removal of dye pollutants in the aqueous environment.

Stimuli-Responsive Ion Adsorbents for Sustainable Separation Applications

Stimuli-responsive ion absorbents (SRIAs) with reversible ion adsorption and desorption properties have recently attracted immense attention due to their outstanding functionalities for sustainable separation applications. Over the past decade, a series of SRIAs that respond to single or multiple external stimuli (e.g., pH, gas, temperature, light, magnetic, and voltage) have been reported to achieve excellent ion adsorption capacity and selectivity while simultaneously allowing for their reusability. In contrast to traditional adsorbents that are mainly regenerated through chemical additives, SRIAs allow for reduced chemical and even chemical-free regeneration capacities, thereby enabling environmentally friendly and energy-efficient separation technologies. In this review, we systematically summarize the materials and strategies reported to date for synthesizing single-, dual-, and multiresponsive ion adsorbents. Following a discourse on the fundamental mechanisms that govern their adsorption and desorption under various external stimuli, we provide a concise discussion of the regeneration capacity and application of these responsive ion adsorbents for sustainable water desalination, toxic ion removal, and valuable ion extract and recovery. Finally, we discuss the challenges in developing and deploying these promising multifunctional responsive ion adsorbents together with strategies to overcome these limitations and provide prospects for their future.

Fascinating Pathway to Facilitate the Photoisomerization of Spiropyran-Based Nanocomposites

Recently, spiropyran-based composites have gained more attention on account of their stimuli-responsive essence, especially of the fascinating and green photo stimulus. However, the great dipole moment change between the ring-opened merocyanine and ring-closed spiropyran requires a large free volume available for isomerization, which significantly restrains the photoisomerization of spiropyran-based nanocomposites. Herein, a fascinating pathway by regulating the states both of spiropyran and the immobilized nanoparticle supports was put forward to facilitate the photoisomerization. The results demonstrated that the spiropyran grafting percentage of 5.18% and immobilized supports with less aggregation, high specific surface area, large pore size, and noncrystalline structure were suitable to fabricate spiropyran-based nanocomposites, which showed a significant improvement for Pb2+ and Cr3+ removal from aqueous solution on account of free photoisomerization of spiropyran on the support's surface. This work will pave the pathway to extend the exploitation of spiropyran-based nanocomposites in various fields such as biotechnology, physiology, and electronics to photonics and environmental-friendly fields.

Competitive adsorption characteristics of VOCs and water vapor by activated carbon prepared from Fe/N-doped pistachio shell

Various materials have been developed to capture volatile organic compounds (VOCs) to mitigate air pollution. However, sorbent materials with excellent resistance to water are rare. Here, several Fe/N-doped activated carbons (ACs) have been prepared to capture VOCs in humid environments. The ACs were analyzed by various characterization techniques, such as BET, SEM, XPS, XRD, FTIR, and Raman. The results showed that Fe/N doping resulted in the specific surface area of the ACs increasing by 500 to 1000 m2 g-1, the average pore size increasing to approximately 2 nm, improved mesoporous structure, higher graphitization, lower hydrophilicity, and polarity. The VOCs adsorption performance of the ACs was evaluated by static and dynamic adsorption experiments. The uptake of toluene and ethyl acetate by ACs was enhanced to 224 mg g-1 and 135 mg g-1, respectively. And ACs were able to maintain 70 to 80% VOCs adsorption capacity for VOCs at 80% relative humidity. Furthermore, the microscopic mechanisms were investigated by the grand canonical Monte Carlo method (GCMC). The highly graphitized structure and the N functional groups favored the VOC adsorption process and discouraged the adsorption of water vapor. This work affirmed the dominance of Fe/N-doped carbon, which will contribute to the evolution of water-resistant VOCs adsorbent materials.

Recent advancements in antimony (Sb) removal from water and wastewater by carbon-based materials: a systematic review

Antimony (Sb) has been classified as a high-priority contaminant in the environment. Sb contamination resulting from the use of antimony-containing compounds in industry necessitates the development of efficient methods to remove it from water and wastewater. Adsorption is a highly efficient and reliable method for pollutants removal owing to its availability, recyclability, and low cost. Recently, carbonaceous materials and their applications for the removal of Sb from the aqueous matrices have received special attention worldwide. Herein, this review systematically summarizes the occurrence and exposure of Sb in the environment and on human health, respectively. Different carbon-based adsorbents have been classified for the adsorptive removal of Sb and their adsorption characteristics have been delineated. Recent development in the adsorption performance of the adsorbent materials for improving the Sb removal from the aqueous medium has been outlined. Further, to develop an understanding of the effect of different parameters like pH, competitive ions, and dissolved ions for Sb adsorption and subsequent removal have been discussed. A retrospective analysis of literature was conducted to present the adsorption behavior and underlying mechanisms involved in the removal of Sb using various adsorbents. Moreover, this study has identified emerging research gaps and emphasized the need for developing modified/engineered carbonaceous adsorbents to enhance Sb adsorption from various aqueous matrices.

Recent advances in conducting polymer-based magnetic nanosorbents for dyes and heavy metal removal: fabrication, applications, and perspective

Globally, treating and disposing of industrial pollutants is a techno-economic challenge. Industries' large production of harmful heavy metal ions (HMIs) and dyes and inappropriate disposal worsen water contamination. Much attention is required on the development of efficient and cost-effective technologies and approaches for removing toxic HMIs and dyes from wastewater as they pose a severe threat to public health and aquatic ecosystems. Due to the proven superiority of adsorption over other alternative methods, various nanosorbents have been developed for the efficient removal of HMIs and dyes from wastewater and aqueous solutions. Being a good adsorbent, conducting polymer-based magnetic nanocomposites (CP-MNCPs) has drawn more attention for HMIs and dye removal. Conductive polymers' pH-responsiveness makes CP-MNCP ideal for wastewater treatment. The composite material absorbed dyes and/or HMIs from contaminated water could be removed by changing the pH. Here, we review the production strategies and applications of CP-MNCPs for HMIs and dye removal. The review also sheds light on the adsorption mechanism, adsorption efficiency, kinetic and adsorption models, and regeneration capacity of the various CP-MNCPs. To date, various modifications to conducting polymers (CPs) have been explored to improve the adsorption properties. It is evident from the literature survey that the combination of SiO₂, graphene oxide (GO), and multi-walled carbon nanotubes (MWCNTs) with CPs-MNCPs enhances the adsorption capacity of nanocomposites to a large extent, so future research should lean toward the development of cost-effective hybrid CPs-nanocomposites.

Adsorption and Desorption Study of Reusable Magnetic Iron Oxide Nanoparticles Modified with Justicia adhatoda Leaf Extract for the Removal of Textile Dye and Antibiotic

The release of tetracycline hydrochloride (TCH) and methylene blue (MB) dye into the aquatic system uncontrollably caused major environmental and health problems; hence, their prevention required serious attention. Adsorption process is now being researched in order to increase adsorption efficiency and reprocess to alleviate environmental issues. The use of magnetic nanoparticle as an adsorbent for wastewater treatment has a lot of prospective. A magnetic iron oxide nanoparticle surface modified by Vasaka (Justicia adhatoda) leaf extract (JA-MIONs) is used to give a fast removal approach for MB dye and TCH antibiotics. Dynamic light scattering, UV-Vis and band gap measurement, powder X-ray diffraction, Fourier-transform infrared spectroscopy, and transmission electron microscopy were operated to analyse the formation and size of these magnetic nanoparticles. The impacts of different factors such as contact time (30-150 min), adsorbate concentration (10-50 mg/L), pH (4-10), and adsorbent dose (2-10 mg) were explored. Adsorption kinetics and isotherms show that it follows the pseudo-first-order kinetic and the Freundlich isotherm, with maximum adsorption capacities of 76.92 mg/g for MB and 200 mg/g for TCH at 298 K. The reusability of the JA-MIONs eventually exhibited a decline in the adsorption percentage of MB and TCH after five and four times respectively. After the desorption-adsorption cycles, this adsorbent continued to exhibit significant adsorption capacity. This investigation furnished the significant reference data for the synthesis of JA-MIONs as a novel and auspicious adsorbent for the industrial clean-up of toxic dyes and heavily used antibiotics from water.

Graphene oxide modified with carboxymethyl cellulose for high adsorption capacities towards Nd(III) and Ce(III) from aqueous solutions

This work addresses a simple method to functionalize graphene oxide with sodium carboxymethyl cellulose using tetraethyl orthosilicate as a linker for rapid and significant removal of Nd(III) and Ce(III) from aqueous solutions. The prepared composite (GO–CMC) was characterized by different techniques to confirm the modification and adsorption process. The sorption performance of the GO–CMC was evaluated using Nd(III) and Ce(III) as absorbent materials. The experimental results demonstrated that the sorption process was excellently fitted by the pseudo-second-order kinetic model. The adsorption results were also analyzed by different isotherm models. According to the Langmuir isotherm model, the experimental sorption capacities at pH 3.0 was 661.21 and 436.55 mg/g for Nd(III) and Ce(III), respectively. The thermodynamic results indicated that the sorption process of the two examined metal ions was endothermic and spontaneous. The regenerated GO–CMC composite has a similar removal percentage to the original composite. These results confirmed that the prepared composite (GO–CMC) could be used as an effective adsorbent for Nd(III) and Ce(III) from certain multielement solutions.

Effective and stable adsorptive removal of Cadmium(II) and Lead(II) using selenium nanoparticles modified by microbial SmtA metallothionein

Metallothionein SmtA-modified selenium nanoparticles (SmtA-SeNPs), efficient adsorbents for Cd(II) and Pb(II), were synthesized in the present work. The ligand, microbial SmtA protein, was synthesized using an engineered strain Escherichia coli, posing the benefits of simplicity, safety, and high production. SmtA-SeNPs were spheres with diameters between 68.1 and 122.4 nm, containing amino, hydroxyl, and sulfhydryl functional groups with negatively charged (pH > 5). SmtA-SeNPs displayed better adsorption performance than dissociative SmtA and SeNPs. The adsorption of Cd(II) and Pb(II) mainly depends on the electrostatic attractions and the metal chelation of abundant functional groups. The maximum adsorption capacity was 506.3 mg/g for Cd(II) and 346.7 mg/g for Pb(II), which were higher than the values of most nanoparticles. In addition, SmtA-SeNPs were immobilized with a membrane filter to produce a SmtA-SeNPs filter, and the percentage removal of Cd(II) and Pb(II) increased from 26.75% to 98.13% for Cd(II) and from 9.95% to 99.20% compared with the blank filter. Moreover, the SmtA-SeNPs filter was regenerated using subacid deionized water, and the filter exhibited a stable removal ratio of Cd(II) and Pb(II) in ten continuous cycles of Cd(II)- or Pb(II)-containing wastewater treatment. The residual amounts of Cd and Pb met national standard levels of wastewater discharge.

Bismuth quantum dots anchored one-dimensional CdS as plasmonic photocatalyst for pharmaceutical tetracycline hydrochloride pollutant degradation

Earth abundant metal based plasmonic photocatalysis is one of the most proficient approaches to degrade the emergent organic pollutants in contaminated water. Here, we report that using one-dimensional CdS/zero-dimensional Bi quantum dot (QD) heterostructures (1D/0D CdS/Bi HSs) were obtained via a simple solvothermal reaction. The results specified that the Bi QDs were grown onto CdS NRs through the reduction of Bi³⁺ ions. The Bi modified CdS HSs were employed as a photocatalyst for pharmaceutical pollutant tetracycline degradation and the optimized sample showed the maximum photocatalytic degradation activity of 90% under visible light radiation within 60 min, which is greater than the pure CdS (52%) under identical conditions. Based on the structural characterizations and degradation efficiency, the obtained CdS/Bi is a promising photocatalyst for the treatment of wastewater which contains emerging pollutants such as organic dyes and pharmaceutical antibiotics during the industrial processes. The boosted photocatalytic degradation efficiency is credited to the doped Bi³⁺ species; surface plasmon resonance effect that raised from metallic Bi QDs and proficient photoinduced charge carriers separation.

Carbon Dots: An Excellent Fluorescent Probe for Contaminant Sensing and Remediation

Pollution-induced degradation of the environment is a serious problem for both developing and developed countries. Existing remediation methods are restricted, necessitating the development of novel remediation technologies. Nanomaterials with unique characteristics have recently been developed for remediation. Quantum dots (QDs) are semiconductor nanoparticles (1-10 nm) with optical and electrical characteristics that differ from bigger particles owing to quantum mechanics, making them intriguing for sensing and remediation applications. Carbon dots (CDs) offer better characteristics than typical QDs, such as, CdSe QDs in terms of contaminant sensing and remediation. Non-toxicity, chemical inertness, photo-induced electron transfer, good biocompatibility, and adjustable photoluminescence behavior are all characteristics of CDs. CDs are frequently made from sustainable raw materials as they are cost-effective, environmentally compactable, and excellent in reducing waste generation. The goal of this review article is to briefly describe CDs fabrication methods, to deeply investigate the criteria and properties of CDs that make them suitable for sensing and remediation of contaminants, and also to highlight recent advances in their use in sensing and remediation of contaminants.

Antimicrobial nanocomposite adsorbent based on poly(meta-phenylenediamine) for remediation of lead (II) from water medium

In this study, poly(m-phenylenediamine)@ZnO (PmPDA@ZnO) nanocomposite was fabricated by in-situ chemical oxidative polymerization for the effective lead(II) removal from aqueous solutions. PmPDA@ZnO was characterized by several instrumental methods like FTIR, XRD, EDX, TGA, FESEM, TEM, zeta potential, and BET. The TEM images showed a core-shell-like structure for the PmPDA@ZnO nanocomposite. TGA results showed that the thermal stability of the PmPDA@ZnO nanocomposite was higher than the PmPDA. The maximum adsorption of lead (II) onto PmPDA@ZnO nanocomposite was obtained at pH 6, adsorbent dosage 60 mg, lead(II) ion concentration 90 mg/L, and agitation time 90 min. Langmuir and Freundlich's isotherm models were evaluated to simulate the lead(II) sorption via empirical data. Langmuir's model was in good agreement with empirical data with a maximum adsorption capacity (Qmax) of 77.51 mg/g. The kinetic data adsorption fitted best the pseudo-second-order model. The values of thermodynamic parameters of ΔS° and ΔH° were obtained 0.272 J/mol K, and 71.35 kJ/mol, respectively. The spontaneous and endothermic behavior of the adsorption process was confirmed by the negative and positive response of ΔG° and ΔH°, respectively. Moreover, the addition of coexisting cations e.g. cobalt (II), nickel (II), calcium (II), and copper (II) had no significant effect on the removal efficiency of lead(II). Adsorption-desorption studies showed that the PmPDA@ZnO nanocomposite can be remarkably regenerated and reused after three sequential runs without a significant decline in its adsorption performance. The antimicrobial activities of PmPDA@ZnO nanocomposite were evaluated against Escherichia coli and Staphylococcus aureus bacteria species. These results confirmed that the PmPDA@ZnO nanocomposite could be a good candidate for water decontamination.

π-π stacking derived from graphene-like biochar/g-C3N4 with tunable band structure for photocatalytic antibiotics degradation via peroxymonosulfate activation

The severe pollution caused by antibiotics has raised serious concerns in recent decades. In this study, graphene-like Enteromorpha biochar modified g-C₃N₄ (BC/CN) was synthesized and applied to degrade tetracycline by activating PMS under visible light, obtaining around 90% removal rate within 1 h. The Enteromorpha biochar can provide electron-withdrawing groups to adjust the electronic structure of g-C₃N₄, and induces more π-π interaction to decline the recombination of photocarriers. The environmental adaptability of the BC/CN/PMS/vis system was confirmed by the TC degradation in different initial pH, coexisting ions, and natural organic materials. In most cases, the system maintained over 78% degradation rate. The kinetics and mechanism of the system indicating that ∙O₂^-, ¹O₂ contributed more to the TC photocatalytic degradation than ∙OH, SO₄∙^-, and h⁺. During the process, TC underwent serials hydroxylation, demethylation, and ring-opening processes, and produced more than 40 intermediates in three pathways. Moreover, the BC/CN/PMS/vis system was proved to have at least a 50% degradation rate for more tetracyclines and quinolone antibiotics with the same condition.

Matrix-dispersed magnetic molecularly-imprinted polyaniline for the effective removal of chlorpyrifos pesticide from contaminated water

We report a new adsorbent nanocomposite material based on matrix-dispersed superparamagnetic iron oxide nanoparticles (SPIONs) in molecularly-imprinted polyaniline for the removal of chlorpyrifos (CPF), a hazardous organophosphate pesticide, from water. The synthesized magnetic molecularly-imprinted polymer (MMIP) was characterized by FTIR spectroscopy, XRD, magnetic susceptibility, DLS, zeta potential measurement, SEM and high-resolution TEM imaging. The average size of the naked SPIONs ranges from 15 to 30 nm according to the high-resolution TEM analysis. Moreover, the adsorption kinetics, thermodynamic parameters (ΔG, ΔH and ΔS), adsorption isotherms and rebinding conditions were investigated in detail. The proposed MMIP has an imprinting factor of 1.64. In addition, it showed a high experimental adsorption capacity of 1.77 mg g-1 and a removal efficiency of nearly 80%. The fabricated MMIP material demonstrated excellent magnetic susceptibility allowing for easy separation using an external magnetic field. The adsorption mechanism of CPF onto the MMIP adsorbent followed the second-order kinetics model and fitted to the Temkin adsorption isotherm. By studying the adsorption thermodynamics, negative ΔG values (-1.955 kJ mol-1 at room temperature) were obtained revealing that the adsorption process is spontaneous. Furthermore, the maximum adsorption capacity was obtained at room temperature (ca. 303 K), neutral pH and using a high CPF concentration.

A Comparative Study on Hexavalent Chromium Adsorption onto Chitosan and Chitosan-Based Composites

Chitosan (Cs)-based composites were developed by incorporating silica (Cs-Si), and both silica and hydroxyapatite (Cs-Si-Hap), comparatively tested to sequester hexavalent (Cr(VI)) ions from water. XRD and FT-IR data affirmed the formation of Cs-Si and Cs-Si-Hap composite. Morphological images exhibits homogeneous Cs-Si surface, decorated with SiO2 nanoparticles, while the Cs-Si-Hap surface was non-homogeneous with microstructures, having SiO2 and Hap nanoparticles. Thermal analysis data revealed excellent thermal stability of the developed composites. Significant influence of pH, adsorbent dose, contact time, temperature, and coexisting anions on Cr(VI) adsorption onto composites was observed. Maximum Cr(VI) uptakes on Cs and developed composites were observed at pH 3. The equilibration time for Cr(VI) adsorption on Cs-Si-Hap was 10 min, comparatively better than Cs and Cs-Si. The adsorption data was fitted to pseudo-second-order kinetic and Langmuir isotherm models with respective maximum monolayer adsorption capacities (qm) of 55.5, 64.4, and 212.8 mg/g for Cs, Cs-Si, and Cs-Si-Hap. Regeneration studies showed that composites could be used for three consecutive cycles without losing their adsorption potential.

Mesoporous Biopolymer Architecture Enhanced the Adsorption and Selectivity of Aqueous Heavy-Metal Ions

Halloysite nanotubes (HNT) and ball-milled biochar (BC) incorporated biocompatible mesoporous adsorbents (HNT-BC@Alg) were synthesized for adsorption of aqueous heavy-metal ions. HNT-BC@Alg outperformed the BC, HNT, and BC@Alg in removing cadmium (Cd), copper (Cu), nickel (Ni), and lead (Pb). Mesoporous structure (∼7.19 to 7.56 nm) of HNT-BC@Alg was developed containing an abundance of functional groups induced from encapsulated BC and tubular HNT, which allowed heavy metals to infiltrate and interact with the adsorbents. Siloxane groups from HNT, oxygen-containing functional groups from BC, and hydroxyl and carboxyl groups from alginate polymer play a significant role in the adsorption of heavy-metal ions. The removal percentage of heavy metals was recorded as Pb (∼99.97 to 99.05%) > Cu (∼95.01 to 90.53%) > Cd (∼92.5 to 55.25%) > Ni (∼80.85 to 50.6%), even in the presence of 0.01/0.001 M of CaCl₂ and Na₂SO₄ as background electrolytes and charged organic molecule under an environmentally relevant concentration (200 μg/L). The maximum adsorption capacities of Ni, Cd, Cu, and Pb were calculated as 2.85 ± 0.08, 6.96 ± 0.31, 16.87 ± 1.50, and 26.49 ± 2.04 mg/g, respectively. HNT-BC@Alg has fast sorption kinetics and maximum adsorption capacity within a short contact time (∼2 h). Energy-dispersive X-ray spectroscopy (EDS) elemental mapping exhibited that adsorbed heavy metals co-distributed with Ca, Si, and Al. The reduction of surface area, pore volume, and pore area of HNT-BC@Alg (after sorption of heavy metals) confirms that mesoporous surface (2-18 nm) supports diffusion, infiltration, and interaction. However, a lower range of mesoporous diameter of the adsorbent is more suitable for the adsorption of heavy-metal ions. The adsorption isotherm and kinetics fitted well with the Langmuir isotherm and the pseudo-second-order kinetic models, demonstrating the monolayer formation of heavy-metal ions through both the physical sorption and chemical sorption, including pore filling, ion exchange, and electrostatic interaction.