Graphitic Carbon with MnO/Mn7 C3 Prepared by Laser-Scribing of MOF for Versatile Supercapacitor Electrodes

Synergy of atomic hydrogen reduction and reactive oxygen species oxidation over confined Mn bifunctional site for electrocatalytic deep mineralization

Traditional reduction or oxidation processes generating one-component free radicals face challenges in deep dechlorination and mineralization of chlorophenols from wastewater. Herein, an efficient electrocatalytic process has been developed, which couples atomic H* reduction with reactive oxidation species (•OH and 1O2) oxidation on a bifunctional cathode for 4 -chlorophenol (4 -CP) removal. The N - doped carbon nanotubes encapsulated manganese nanoparticles was fabricated as cathode, which could generate atomic H* , initiating nucleophilic hydrodechlorination in presence of confined MnO sites. Subsequently, electrophilic oxidation by generating mainly 1O2 on confined Mn7C3 sites and •OH on confined MnO sites, facilitating the oxidative processes. Experimental results and theory calculations demonstrated that reductive dechlorination and oxidative mineralization processes could mutually promote each other, resulting in an enhancement factor of 2.90. At pH 7, this process achieved 100 % removal for 4 -CP, 84 % dechlorination, 76 % total organic carbon (TOC) removal and low energy consumption (0.76 kWh g-1TOC) within 120 min. Notably, TOC for chlorophenols containing Cl substituents at different positions and real lake water containing 4 -CP could be almost completely removed. This research establishes confined non-noble bifunctional active sites that synergistically enhance reductive dechlorination and oxidative degradation processes, holding significant treatment potential for application in deep mineralization of organochlorine from water/wastewater.

Ion Exchange-Mediated 3D Cross-Linked ZIF-L Superstructure for Flexible Electrochemical Energy Storage

Metal-organic frameworks (MOFs) are considered as a promising candidate for advancing energy storage owing to their intrinsic multi-channel architecture, high theoretical capacity, and precise adjustability. However, the low conductivity and poor structural stability lead to unsatisfactory rate and cycling performance, greatly hindering their practical application. Herein, we propose a sea urchin-like Co-ZIF-L superstructure using molecular template to induce self-assembly followed by ion exchange method, which shows improved conductivity, successive channels, and high stability. The ion exchange can gradually etch the superstructure, leading to the reconstruction of Co-ZIF-L with three-dimensional (3D) cross-linked ultrathin porous nanosheets. Moreover, the precise control of Co to Ni ratios can construct effective micro-electric field and synergistically enhance the rapid transfer of electrons and electrolyte ions, improving the conductivity and stability of CoNi-ZIF-L. The Co6.53Ni-ZIF-L electrode exhibits a high specific capacity (602 F g-1 at 1 A g-1) and long cycling stability (95.3 % retention after 4,000 cycles at 5 A g-1). The Co6.53Ni-ZIF-L//AC asymmetric flexible supercapacitor employing gel electrolyte also exhibits excellent cycling stability (93.3 % retention after 4000 cycles at 5 A g-1). This discovery provides valuable insights for electrode material selection and energy storage efficiency improvement.

Advancements in Manganese-Based Cathode for Sustainable Energy Utilization

Manganese-based compounds, especially manganese oxides, are one of the most exceptional electrode materials. Specifically, manganese oxides have gained significant interest owing to their unique crystal structures, high theoretical capacity, abundant natural availability and eco-friendly nature. However, as transition metal semiconductors, manganese oxide possess low electrical conductivity, limited rate capacity, and suboptical cycle stability. Thus, combining manganese oxides with carbon or other metallic materials can significantly improve their electrochemical performance. These composites increase active sites and conductivity, thereby improving electrode reaction kinetics, cycle stability, and lifespan of supercapacitors (SCs) and batteries. This paper reviews the latest applications of Mn-based cathodes in SCs and advanced batteries. Moreover, the energy storage mechanisms were also proposed. In this review, the development prospects and challenges for advanced energy storage applications of Mn-based cathodes are summarized.

Advances in Mn-Based MOFs and Their Derivatives for High-Performance Supercapacitor

As the most widely used metal material in supercapacitors, manganese (Mn)-based materials possess the merits of high theoretical capacitance, stable structure as well as environmental friendliness. However, due to poor conductivity and easy accumulation, the practical capacitance of Mn-based materials is far lower than that of theoretical value. Therefore, accurate structural adjustment and controllable strategies are urgently needed to optimize the electrochemical properties of Mn-based materials. Metal-organic frameworks (MOFs) are porous materials with high specific surface area (SSA), tunable pore size, and controllable structure. These features make them attractive as precursors or scaffold for the synthesis of metal-based materials and composites, which are important for electrochemical energy storage applications. Therefore, a timely and comprehensive review on the classification, design, preparation and application of Mn-based MOFs and their derivatives for supercapacitors has been given in this paper. The recent advancement of Mn-based MOFs and their derivatives applied in supercapacitor electrodes are particularly highlighted. Finally, the challenges faced by Mn-MOFs and their derivatives for supercapacitors are summarized, and strategies to further improve their performance are proposed. The aspiration is that this review will serve as a beneficial compass, guiding the logical creation of Mn-based MOFs and their derivatives in the future.

Sustainable paper electronics and neuromorphic paper chip

Paper electronics have received a lot of attention due to their special properties of mechanical flexibility/foldability, sustainability, biodegradability, light weight, and low cost. It provides a superb on-chip prototype with simple modular design and feasible energy-autonomous features, which can surpass the problems of inconvenience and possible pollution caused by conventional power sources by integrating different functional modules. Commonly, the sustainable operation of integrated paper electronics can be guaranteed by the basic components, including energy-harvesting devices, energy-storage devices, and low-power-consuming functional circuits/devices. Furthermore, sustainable paper electronics are possible to be further extended to develop energy-efficient neuromorphic paper chip by utilizing cutting-edge neuromorphic components based on traditional paper-based transistors, memories, and logic gates toward potential in-memory computing applications. The working process of the sustainable paper electronics implies an energy cycling of surrounding energy conversion, electrochemical energy storage, and energy utilization in functional circuits (in the form of photonic, thermal, electromagnetic, or mechanical energy). Sustainable paper electronics provide a promising path for achieving efficient, cost-effective, and customizable integrated electronics and self-powered systems with complementary features.

Al-MOF-derived porous carbon-modified Pt/C catalyst for constructing a high-performance super fuel cell via an ORR + EDLC parallel-discharge mechanism

In order to reduce the high polarization caused by the hysteresis effect of O2 diffusion and boost the power density of oxygen cathodes under a transient heavy load, an Al-MOF-derived porous carbon-modified Pt/C catalyst is proposed as a new capacitive ORR catalyst to construct super fuel cells (SFCs) via an ORR + EDLC dual-discharge parallel process. Herein, a capacitive porous carbon material (BTCC-2) with a large specific surface area (SSA) and high graphitization was synthesized via one-step carbonization of Al-MOFs (Al-BTC). After compounding BTCC-2 with commercial Pt/C catalysts, electrochemical tests were performed and revealed that the composite with 40% BTCC-2 provided the highest transient discharge performance. Moreover, the composite had a higher onset potential and limiting current density (5.236 mA cm-2) than Pt/C and a half-wave potential (0.833 V) comparable to that of Pt/C. The abundant pore structure and large surface of BTCC-2 greatly increased the interaction between oxygen and the catalyst surface. Besides, the contained BTCC-2 serve as a significant power bank to remarkably buffer and relieve the rapidly decreasing output voltage under an instant heavy load owing to the oxygen deficiencies in a Zn-air battery through the ORR + EDLC dual-parallel-discharge process. The proposed SFC design has potential as a universal method to solve the sluggish ORR process and provide high transient power density for fuel cell-driven vehicles.

Electronic configuration regulation of single-atomic Mn sites mediated by Mo/Mn clusters for an efficient hydrogen evolution reaction

Tuning the electron distribution of metal single-atom active sites via bimetallic clusters is an effective way to enhance their hydrogen evolution reaction (HER) activity, but remains a great challenge. A biochar-based electrocatalyst (BCMoMn800-2) with both MnN4 active sites and Mo2C/Mn7C3 clusters was synthesized using in situ enriched Mo/Mn biomass as a precursor to trigger the HER. Various characterization and density functional theory (DFT) calculation results indicated that the presence of Mo2C/Mn7C3 clusters in BCMoMn800-2 effectively induced the redistribution of charges at MnN4 sites, reducing the energy of H* activation during the HER. In 0.5 M H2SO4, the overpotential was 27.4 mV at a current density of 10 mA cm-2 and the Tafel slope was 31 mV dec-1, and its electrocatalytic performance was close to that of Pt/C. The electrocatalyst also exhibited excellent electrocatalytic stability and durability. This work might provide a new strategy for solid waste recycling and constructing efficient HER electrocatalysts.

Laser-Driven Rapid Synthesis of Metal-Organic Frameworks and Investigation of UV-NIR Optical Absorption, Luminescence, Photocatalytic Degradation, and Gas and Ion Adsorption Properties

In this study, we designed a platform based on a laser-driven approach for fast, efficient, and controllable MOF synthesis. The laser irradiation method was performed for the first time to synthesize Zn-based MOFs in record production time (approximately one hour) compared to all known MOF production methods with comparable morphology. In addition to well-known structural properties, we revealed that the obtained ZnMOFs have a novel optical response, including photoluminescence behavior in the visible range with nanosecond relaxation time, which is also supported by first-principles calculations. Additionally, photocatalytic degradation of methylene blue with ZnMOF was achieved, degrading the 10 ppm methylene blue (MB) solution 83% during 1 min of irradiation time. The application of laser technology can inspire the development of a novel and competent platform for a fast MOF fabrication process and extend the possible applications of MOFs to miniaturized optoelectronic and photonic devices.

Recent Advances in Laser-Induced Synthesis of MOF Derivatives

Metal-organic frameworks (MOFs) are crystalline materials with permanent pores constructed by the self-assembly of organic ligands and metal clusters through coordination bonds. Due to their diversity and tunability, MOFs are used as precursors to be converted into other types of functional materials by pyrolytic recrystallization. Laser-induced synthesis is proven to be a powerful pyrolytic processing technique with fast and accurate laser irradiation, low loss, high efficiency, selectivity, and programmability, which endow MOF derivatives with new features. Laser-induced MOF derivatives exhibit high versatility in multidisciplinary research fields. In this review, first, the basic principles of laser smelting and the types of materials for laser preparation of MOF derivatives are briefly introduced. Subsequently, it is focused on the peculiarity of the engineering of structural defects and their applications in catalysis, environmental protection, and energy fields. Finally, the challenges and opportunities at the current stage are highlighted with the aim of elucidating the future direction of the rapidly growing field of laser-induced synthesis of MOF derivatives.

Metal-Organic Frameworks and Their Derivatives-Based Nanostructure with Different Dimensionalities for Supercapacitors

With the urgent demand for the achievement of carbon neutrality, novel nanomaterials, and environmentally friendly nanotechnologies are constantly being explored and continue to drive the sustainable development of energy storage and conversion installations. Among various candidate materials, metal-organic frameworks (MOFs) and their derivatives with unique nanostructures have attracted increasing attention and intensive investigation for the construction of next generation electrode materials, benefitting from their unique intrinsic characteristics such as large specific surface area, high porosity, and chemical tunability as well as the interconnected channels. Nevertheless, the poor electrochemical conductivity severely limits their application prospects, hence a variety of nanocomposites with multifarious structures have been designed and proposed from different dimensionalities. In this review, recent advances based on MOFs and their derivatives in different dimensionalities ranging from 1D nanopowders to 2D nanofilms and 3D aerogels, as well as 4D self-supporting electrodes for supercapacitors are summarized and highlighted. Furthermore, the key challenges and perspectives of MOFs and their derivatives-based materials for the practical and sustainable electrochemical energy conversion and storage applications are also briefly discussed, which may be served as a guideline for the design of next-generation electrode materials from different dimensionalities.

Nickel Acetate-Assisted Graphitization of Porous Activated Carbon at Low Temperature for Supercapacitors With High Performances

Catalytic graphitization opens a route to prepare graphitic carbon under fairly mild conditions. Biomass has been identified as a potentially attractive precursor for graphitic carbon materials. In this work, corn starch was used as carbon source to prepare hollow graphitic carbon microspheres by pyrolysis after mixing impregnation with nitrate salts, and the surface of these carbon microspheres is covered with controllable pores structure. Under optimal synthesis conditions, the prepared carbon microspheres show a uniform pore size distribution and high degree of graphitization. When tested as electrode materials for supercapacitor with organic electrolyte, the electrode exhibited a superior specific capacitance of 144.8 F g-1 at a current density of 0.1 A g-1, as well as large power density and a capacitance retention rate of 93.5% after 1,000 cycles in galvanostatic charge/discharge test at 1.0 A g-1. The synthesis extends use of the renewable nature resources and sheds light on developing new routes to design graphitic carbon microspheres.