Electron-Rich Pincer Ligand-Coupled Cobalt Porphyrin Polymer with Single-Atom Sites for Efficient (Photo)Electrocatalytic CO2 Reduction at Ultralow Overpotential

Na-Ru bimetallic functional sites promote photo-driven CO2 directed conversion into CH4

Recently, there has been a significant increase in interest in using photocatalysis for the energy conversion of polluting gases. In this research, sodium and ruthenium bimetallic functional sites co-modified bismuth tungstate (Ru/Na-Bi2WO6) nanoflower photocatalyst was synthesized via the hydrothermal method. The CO2 reduction products on the Bi2WO6 substrate were CO (1.66 μmol/g/h, 68 %) and CH4 (0.78 μmol/g/h, 32 %). After optimization, a significant change in the CO2 products of the Bi2WO6-based composite material was observed, with CO (0.61 μmol/g/h, 3.6 %) and CH4 (16.1 μmol/g/h, 96.4 %). Results showed that the dominance of CH4 as the main product in the Ru/Na-BWO system is attributed to the effective doping of Na, which generates impurity energy levels composed of oxygen vacancies, lowering the conduction band position of Bi2WO6, thereby suppressing CO generation, and enhancing CH4 selectivity by changing the CO2 activation pathway. The remarkable performance is ascribed to the synergized adsorption and activation of CO2 by the tandem Na+ sites and Ru0 sites. Specifically, the doped Na+ sites play a major role in promoting the adsorption CO2 molecules, while the Ru0 sites play a dominant role in facilitating the activation of the intermediates.

The windmill, the dragon, and the frog: geometry control over the spectral, magnetic, and electrochemical properties of cobalt phthalocyanine regioisomers

For the first time, we have prepared non-aggregating phthalocyanine cobalt complexes as a set of resolved positional isomers. These compounds comprise a unique test bed for the structure-properties studies, as their optical and electrochemical properties are influenced by the planarity of the phthalocyanine macrocycle, which can be controlled by the positional isomerism of the bulky aromatic substituents at the α-phthalo sites. We support our conclusions with molecular modelling studies, which show a perfect match between the calculated and experimentally determined spectral/electrochemical values. We challenge a common perception that the NMR spectra of cobalt phthalocyanines cannot be measured due to the paramagnetic nature of Co(II). We suggest instead that the key factors affecting the NMR spectral resolution are molecular aggregation and π-π stacking. These interactions are suppressed by the bulky peripheral substituents on the cobalt phthalocyanines prepared, making these isomeric compounds an excellent tool for paramagnetic NMR studies.

The Versatile Establishment of Charge Storage in Polymer Solid Electrolyte with Enhanced Charge Transfer for LiF-Rich SEI Generation in Lithium Metal Batteries

The solid-state electrolyte interface (SEI) between the solid-state polymer electrolyte and the lithium metal anode dramatically affects the overall battery performance. Increasing the content of lithium fluoride (LiF) in SEI can help the uniform deposition of lithium and inhibit the growth of lithium dendrites, thus improving the cycle stability performance of lithium batteries. Currently, most methods of constructing LiF SEI involve decomposing the lithium salt by the polar groups of the filler. However, there is a lack of research reports on how to affect the SEI layer of Li-ion batteries by increasing the charge transfer number. In this study, a porous organic polymer with "charge storage" properties was prepared and doped into a polymer composite solid electrolyte to study the effect of sufficient charge transfer on the decomposition of lithium salts. The results show in contrast to porphyrins, the unique structure of POF allows for charge transfer between each individual porphyrin. Therefore, during TFSI- decomposition to the formation of LiF, TFSI- can obtain sufficient charge, thereby promoting the break of C-F and forming the LiF-rich SEI. Compared with single porphyrin (0.423 e-), POF provides 2.7 times more charge transfer to LiTFSI (1.147 e-). The experimental results show that Li//Li symmetric batteries equipped with PEO-POF can be operated stably for more than 2700 h at 60 °C. Even the Li//Li (45 μm) symmetric cells are stable for more than 1100 h at 0.1 mA cm-1. In addition, LiFePO4//PEO-POF//Li batteries have excellent cycling performance at 2 C (80 % capacity retention after 750 cycles). Even LiFePO4//PEO-POF//Li (45 μm) cells have excellent cycling performance at 1 C (96 % capacity retention after 300 cycles). Even when the PEO-base is replaced with a PEG-base and a PVDF-base, the performance of the cell is still significantly improved. Therefore, we believe that the concept of charge transfer offers a novel perspective for the preparation of high-performance assemblies.

Tuning the Hydroxyl Density of MXene to Regulate the Electrochemical Performance of Anchored Cobalt Phthalocyanine for CO2 Reduction

Precise electronic state regulation through coordination environment optimization by metal-support interaction is a promising strategy to facilitate catalysis reaction, while the limited density of functional groups in the bulk substrate restricts the regulation degree. Herein, different sizes of Ti₃C₂T_x MXene with hydroxyl (-OH) terminal including the MXene layer (ML-OH, 3 μm), the MXene nanosheet (MNS-OH, 600 nm), and the MXene quantum dot (MQD-OH, 8 nm) were prepared to anchor CoPc, and the effect of -OH density on the performance of electrochemical CO₂ reduction was systematically investigated. Notably, a linear relationship was established by plotting reactivity vs hydroxyl density. With the highest -OH density, CoPc/MQD-OH exhibits a superior Faradaic efficiency for CO formation (FE_CO) of ∼100% at -0.9 to -1.0 V vs RHE and a high FE_CO of >90% over a wide potential window from -0.8 to -1.4 V. The mechanism exploration shows that the axial coordination interaction of the -OH terminal with Co increases the electron density of the Co site, thus promoting the adsorption and activation of CO₂. This work provides a new insight into designing of molecular catalysts with high efficiency and tunable structure for other electrochemical conversions.

Synthesis of Pore-Wall-Modified Stable COF/TiO2 Heterostructures via Site-Specific Nucleation for an Enhanced Photoreduction of Carbon Dioxide

Constructing stable heterostructures with appropriate active site architectures in covalent organic frameworks (COFs) can improve the active site accessibility and facilitate charge transfer, thereby increasing the catalytic efficiency. Herein, a pore-wall modification strategy is proposed to achieve regularly arranged TiO₂ nanodots (≈1.82 nm) in the pores of COFs via site-specific nucleation. The site-specific nucleation strategy stabilizes the TiO₂ nanodots as well as enables the controlled growth of TiO₂ throughout the COFs' matrix. In a typical process, the pore wall is modified and site-specific nucleation is induced between the metal precursors and the organic walls of the COFs through a careful ligand selection, and the strongly bonded metal precursors drive the confined growth of ultrasmall TiO₂ nanodots during the subsequent hydrolysis. This will result in remarkably improved surface reactions, owing to the superior catalytic activity of TiO₂ nanodots functionalized to COFs through strong NTiO bonds. Furthermore, density functional theory studies reveal that pore-wall modification is beneficial for inducing strong interactions between the COF and TiO₂ and results in a large energy transfer via the NTiO bonds. This work highlights the feasibility of developing stable COF and metal oxide based heterostructures via organic wall modifications to produce carbon fuels by artificial photosynthesis.

Structural Regulation of Coupled Phthalocyanine-Porphyrin Covalent Organic Frameworks to Highly Active and Selective Electrocatalytic CO2 Reduction

Covalent organic frameworks (COFs) have been applied as potential electrocatalysts for CO₂ reduction reaction (CO₂ RR) due to their adjustable architecture and porous feature. Herein, tetraanhydrides of 2,3,9,10,16,17,23,24-octacarboxyphthalocyanine cobalt(II) (CoTAPc) are used as nodes to couple with 5,15-di(4-aminophenyl)-10,20-diphenylporphyrin (DAPor) or 5,15,10,20-tetrayl(4-aminophenyl)porphyrin (TAPor) via imidization reaction to fabricate novel coupled phthalocyanine-porphyrin Type 1:2 (CoPc-2H₂ Por) or Type 1:1 (CoPc-H₂ Por) COFs. Electrocatalytic CO₂ RR experiments show that both Type 1:2 and Type 1:1 COFs exhibit the maximum Faraday efficiency over 90% with high stability, while the Type 1:2 COF (CoPc-2H₂ Por) delivers lower overpotential, higher current density, and CO selectivity than Type 1:1 COF (CoPc-H₂ Por) and CoPc monomer. Theoretical and experimental results reveal that the better CO₂ RR activity of CoPc-2H₂ Por than CoPc-H₂ Por can be attributed to its larger pore size and conjugate structure, which then cause more efficient electron transfer, adsorption/activation of CO₂ , faster mass transfer, and reaction kinetics. This work provides a new idea in the structural design of COF-based electrocatalyst for efficient CO₂ RR.