Core-Shell CoSe2 /WSe2 Heterostructures@Carbon in Porous Carbon Nanosheets as Advanced Anode for Sodium Ion Batteries

Tannic acid etching construction of hollow heterogeneous CoSe2-FeSe2@nitrogen-doped carbon rhombic dodecahedron for high-performance sodium storage

Metal selenides are very promising anode materials for sodium ion batteries (SIBs) due to their rich redox behaviors, low cost, high theoretical capacity, and environmentally benign. However, the poor cycle performance and rate capability greatly hinder their widespread applications. In this paper, we have proposed a tannic acid etching zeolitic imidazolate framework-67 (ZIF-67)-derived selenide strategy to construct hollow heterogeneous CoSe2-FeSe2@N-doped carbon rhombic dodecahedron (CoSe2-FeSe2@NC) as anode for high-performance SIBs. The special microstructural characteristics with hollow rhombic dodecahedron can reduce the Na+/electron migration path and alleviate the volume variations during cycling. The NC can improve conductivity and reduce volume effects during cycling. What's more, the built-in electric fields (BIEF) at the CoSe2-FeSe2 heterointerfaces can modulate the electronic structure and accelerate the kinetics of ionic diffusion, resulting in the improvement electrochemical properties. When applied as anodes for SIBs, the CoSe2-FeSe2@NC can deliver a remarkable electrochemical performance in terms of sodium storage capacity (648.5 mAh g-1 at 0.2 A/g), initial coulombic efficiency (82.0 %), cycle performance (92.6 % capacity retention after 100 cycles), and rate capability of 450.6 mAh g-1 after 1000 cycles at a high rate of 1 A/g. The kinetic analysis indicates that the discharging-charging process of CoSe2-FeSe2@NC is ascribed to both capacitive behavior and controlled diffusion.

Anion Doping and Dual-Carbon Confinement Strategies to Synergistically Boost the Sodium Storage Performance of Cobalt-Based Sulfides

Cobalt-based sulfides (CSs) are generally regarded as potentially valuable anode materials for sodium-ion batteries (SIBs) due to their excellent theoretical capacity and natural abundance. Nevertheless, their slow reaction kinetics and poor structural stability restrict the practical application of the materials. In this study, the dual-carbon-confined Se-CoS2@NC@C hollow nanocubes with anion doping are synthesized using ZIF-67 as the substrate by resorcin-formaldehyde (RF) encapsulation and subsequent carbonization and sulfurization/selenization. RF- and ZIF-67-derived dual-carbon skeleton hollow structures with a robust carbon skeleton and abundant internal space minimize cyclic stress, mitigate volume changes and maintain the structural integrity of the material. More importantly, Se doping increases the lattice spacing of CoS2, weakens the strength of Co-S bonds, and modulates the electronic structure around Co atoms, thereby optimizing the adsorption energy of the material. As a result, the hollow nanocubes of Se-CoS2@NC@C demonstrates excellent electrochemical performance as the anode for SIBs, delivering a high reversible capacity of 549.4 mAh g-1 at 0.5 A g-1 after 100 cycles and a superb rate performance (541.1 mAh g-1 at 0.2  A  g-1, and 393.3 mAh g-1 at 5 A g-1). This study proposes a neoteric strategy for synthesizing advanced anodes for SIBs through the synergy of anion doping engineering and dual-carbon confinement strategy.

Chloride-Ion-Enriched Solid Electrolyte Interphase with Rapid Na+ Migration toward High-Performance Sodium-Ion Batteries

Sodium-ion batteries (SIBs) have emerged as potential alternatives to lithium-ion batteries (LIBs), particularly for large-scale applications. Alloy-type anode materials for sodium-ion batteries are esteemed as prospective candidate materials for sodium-ion anodes, owing to their elevated theoretical capacity, heightened utilization efficiency, and minimal production of insulating byproducts. However, the severe volume changes and sluggish ion diffusion kinetics can lead to irreversible particle fragmentation and reaggregation phenomena, ultimately resulting in electrode degradation. Additionally, repetitive volume changes can cause an unstable solid electrolyte interphase (SEI). This study presents the synthesis of chloride-ion-modulated bimetallic SnSb/C nanoparticle anode materials, highlighting the following advantages: (i) Designing a bimetallic SnSb alloy structure serves to buffer the structural stresses generated during sodium insertion/extraction processes, effectively mitigating particle fracture phenomena induced by electrode material expansion/contraction. (ii) Nanostructuring both alloy materials enables the full utilization of active materials and shortens diffusion pathways, thereby significantly enhancing the diffusion rate of sodium ions. (iii) Introducing a carbonaceous matrix serves to alleviate self-agglomeration phenomena of the material during charge/discharge cycles, enhancing the material's conductivity and structural stability. (iv) Utilizing chloride-ion interface modification to achieve a chloride-rich solid-electrolyte interphase (SEI) enhances battery performance.

Design and Optimization of Iron-Based Superionic-Like Conductor Anode for High-Performance Lithium/Sodium-Ion Batteries

Metal selenides have received extensive research attention as anode materials for batteries due to their high theoretical capacity. However, their significant volume expansion and slow ion migration rate result in poor cycling stability and suboptimal rate performance. To address these issues, the present work utilized multivalent iron ions to construct fast pathways similar to superionic conductors (Fe-SSC) and introduced corresponding selenium vacancies to enhance its performance. Based on first-principles calculations and molecular dynamics simulations, it is demonstrated that the addition of iron ions and the presence of selenium vacancies reduced the material's work function and adsorption energy, lowered migration barriers, and enhances the migration rate of Li+ and Na+. In Li-ion half batteries, this composite material exhibites reversible capacity of 1048.3 mAh g-1 at 0.1 A g-1 after 100 cycles and 483.6 mAh g-1 at 5.0 A g-1 after 1000 cycles. In Na-ion half batteries, it is 687.7 mAh g-1 at 0.1 A g-1 after 200 cycles and 325.9 mAh g-1 at 5.0 A g-1 after 1000 cycles. It is proven that materials based on Fe-SSC and selenium vacancies have great applications in both Li-ion batteries and Na-ion batteries.

Metal Coordination Complex Derived Fe7S8 Particles Embedded in N-doped Carbon Framework with Regulated Porous Structure Enabling High-Rate and Durable Sodium Storage

Iron sulfides with high theoretical capacity confront the challenges of low rate capability and severe capacity fading for sodium storage, which are mainly caused by poor electron/ion transport kinetics and drastic volume fluctuations during cycling. Herein, to mitigate these obstacles, a multi-step synthetic tactic involving solvothermal, carbonization, and subsequent sulfurization is put forward for the construction of wire-like structure by confining Fe7S8 particles in porous N-doped carbon framework (denoted as Fe7S8/PNC) using zinc iron nitrilotriacetate as template. By partially substituting Fe3+ with Zn2+ in the metal coordination complex, the porous structure of coordination complex derived carbon framework can be regulated through pore structure engineering of Zn nanodroplets. The desired porous and robust core/shell structure can not only afford favorable electron/Na+ transport paths and additional active sites for Na+ storage, but also provide reinforced structural integrity of interior Fe7S8 particles by retarding the pulverization and buffering the mechanical stress against volume fluctuations. As anode for sodium-ion batteries, the optimal Fe7S8/PNC delivers a high reversible capacity (743 mAh g-1 at 0.1 A g-1), superior rate capability (553 mAh g-1 at 10 A g-1), and long-term cycling stability (602 mAh g-1 at 5 A g-1 with 98.5% retention after 1000 cycles).

Strain Self-Adaptive Iron Selenides Toward Stable Na+-Ion Batteries with Impressive Initial Coulombic Efficiency

High tap density electrodes play a vital role in developing rechargeable batteries with high volumetric capacities, however, developing advanced electrodes with satisfied capacity, excellent structural stability, and achieving the resulted batteries with a high initial Coulombic efficiency (ICE) and good rate capability with long lifespan simultaneously, are still an intractable challenge. Herein, an ultrahigh ICE of 94.1% and stable cycling of carbon-free iron selenides anode is enabled with a high tap density of 2.57 g cm-3 up to 4000 cycles at 5 A g-1 through strain-modulating by constructing a homologous heterostructure. Systematical characterization and theoretical calculation show that the self-adaptive homologous heterointerface alleviates the stress of the iron selenide anodes during cycling processes and subsequently improves the stability of the assembled batteries. Additionally, the well-formed homologous heterostructure also contributes to the rapid Na+ diffusion kinetic, increased charge transfer, and good reversibility of the transformation reactions, endowing the appealing rate capability of carbon-free iron selenides. The proposed design strategy provides new insight and inspiration to aid in the ongoing quest for advanced electrode materials with high tap densities and excellent stability.

Vacancy-Defect Ternary Topological Insulators Bi2Se2Te Encapsulated in Mesoporous Carbon Spheres for High Performance Sodium Ion Batteries and Hybrid Capacitors

Ternary topological insulators have attracted worldwide attention because of their broad application prospects in fields such as magnetism, optics, electronics, and quantum computing. However, their potential and electrochemical mechanisms in sodium ion batteries (SIBs) and hybrid capacitors (SIHCs) have not been fully studied. Herein, a composite material comprising vacancy-defects ternary topological insulator Bi2Se2Te encapsulated in mesoporous carbon spheres (Bi2Se2Te@C) is designed. Bi2Se2Te with ample vacancy-defects has a wide interlayer spacing to enable frequent insertion/extraction of Na+ and boost reaction kinetics within the electrode. Meanwhile, the Bi2Se2Te@C with optimized yolk-shell structure can buffer the volume variation without breaking the outer protective carbon shell, ensuring structural stability and integrity. As expected, the Bi2Se2Te@C electrode delivers high reversible capacity and excellent rate capability in half SIB cells. Various electrochemical analyses and theoretical calculations manifest that Bi2Se2Te@C anode confirms the synergistic effect of ternary chalcogenide systems and suitable void space yolk-shell structure. Consequently, the full cells of SIB and SIHC coupled with Bi2Se2Te@C anode exhibit good performance and high energy/power density, indicating its widespread practical applications. This design is expected to offer a reliable strategy for further exploring advanced topological insulators in Na+-based storage systems.

SnO2/Sn with core-shell structure Schottky heterojunctions loaded in graphene to promote electrochemical reaction kinetics and enable efficient lithium-ion storage

The stannic oxide (SnO2) anode expands in volume during cycling causing a decrease in reversible capacity. In this work, we generated a spherical SnO2/Sn heterojunction with core-shell structure composites encapsulated by graphene (SnO2/Sn/G) in situ using a simple one-step hydrothermal and subsequent annealing process. SnO2/Sn heterojunction nanospheres dispersed in a porous graphene framework accelerate the diffusion kinetics of electrons and ions. In addition, the structure plays a key role in mitigating large volume changes and nanostructure agglomeration. As a result, SnO2/Sn/G exhibits excellent performance as an anode material for lithium-ion batteries (LIBs), maintaining a reversible specific capacity of 720.6 mA h g-1 even after 600 cycles at a current density of 0.5 A g-1.

Heterogeneous engineering and carbon confinement strategy to synergistically boost the sodium storage performance of transition metal selenides

Transition metal selenides (TMSs) stand out as a promising anode material for sodium-ion batteries (SIBs) owing to their natural resources and exceptional sodium storage capacity. Despite these advantages, their practical application faces challenges, such as poor electronic conductivity, sluggish reaction kinetics and severe agglomeration during electrochemical reactions, hindering their effective utilization. Herein, the dual-carbon-confined CoSe2/FeSe2@NC@C nanocubes with heterogeneous structure are synthesized using ZIF-67 as the template by ion exchange, resorcin-formaldehyde (RF) coating, and subsequent in situ carbonization and selenidation. The N-doped porous carbon promotes rapid electrolyte penetration and minimizes the agglomeration of active materials during charging and discharging, while the RF-derived carbon framework reduces the cycling stress and keeps the integrity of the material structure. More importantly, the built-in electric field at the heterogeneous boundary layer drives electron redistribution, optimizing the electronic structure and enhancing the reaction kinetics of the anode material. Based on this, the nanocubes of CoSe2/FeSe2@NC@C exhibits superb sodium storage performance, delivering a high discharge capacity of 512.6 mA h g-1 at 0.5 A g-1 after 150 cycles and giving a discharge capacity of 298.2 mA h g-1 at 10 A g-1 with a CE close to 100.0 % even after 1000 cycles. This study proposes a viable method to synthesize advanced anodes for SIBs by a synergy effect of heterogeneous interfacial engineering and a carbon confinement strategy.

Rod-like Ni-CoS2@NC@C: Structural design, heteroatom doping and carbon confinement engineering to synergistically boost sodium storage performance

Currently, conversion-type transition metal sulfides have been extensively favored as the anodes for sodium-ion batteries due to their excellent redox reversibility and high theoretical capacity; however, they generally suffer from large volume expansion and structural instability during repeatedly Na+ de/intercalation. Herein, spatially dual-confined Ni-doped CoS2@NC@C microrods (Ni-CoS2@NC@C) are developed via structural design, heteroatom doping and carbon confinement to boost sodium storage performance of the material. The morphology of one-dimensional-structured microrods effectively enlarges the electrode/electrolyte contact area, while the confinement of dual-carbon layers greatly alleviates the volume change-induced stress, pulverization, agglomeration of the material during charging and discharging. Moreover, the introduction of Ni improves the electrical conductivity of the material by modulating the electronic structure and enlarges the interlayer distance to accelerate Na+ diffusion. Accordingly, the as-prepared Ni-CoS2@NC@C exhibits superb electrochemical properties, delivering the satisfactory cycling performance of 526.6 mA h g-1 after 250 cycles at 1 A g-1, excellent rate performance of 410.9 mA h g-1 at 5 A g-1 and superior long cycling life of 502.5 mA h g-1 after 1,500 cycles at 5 A g-1. This study provides an innovative idea to improve sodium storage performance of conversion-type transition metal sulfides through the comprehensive strategy of structural design, heteroatom doping and carbon confinement.

Structure and Defect Engineering of V3S4-xSex Quantum Dots Confined in a Nitrogen-Doped Carbon Framework for High-Performance Sodium-Ion Storage

Constructing quantum dot-scale metal sulfides with defects and strongly coupled with carbon is significant for advanced sodium-ion batteries (SIBs). Herein, Se substituted V3S4 quantum dots with anionic defects confined in nitrogen-doped carbon matrix (V3S4-xSex/NC) are fabricated. Introducing element Se into V3S4 crystal expands the interlayer distance of V3S4, and triggers anionic defects, which can facilitate Na+ diffusions and act as active sites for Na+ storage. Meanwhile, the quantum dots tightly encapsulated by conductive carbon framework improve the stability and conductivity of the electrode. Theoretical calculations also unveil that the presence of Se enhances the conductivity and Na+ adsorption ability of V3S4-xSex. These properties contribute to the V3S4-xSex/NC with high specific capacity of 447 mAh g-1 at 0.2 A g-1, and prominent rate and cyclic performance with 504 mAh g-1 after 1000 cycles at 10 A g-1. The sodium-ion hybrid capacitors (SIHCs) with V3S4-xSex/NC anode and activated carbon cathode can achieve high energy/power density (maximum 144 Wh kg-1/5960 W kg-1), capacity retention ratio of 71% after 4000 cycles at 2 A g-1. This work not only synthesizes V3S4-xSex/NC, but also provides a promising opportunity for designing quantum dots and utilizing defects to improve the electrochemical properties.

ZnSe/SnSe Heterostructure Incorporated with Selenium/Nitrogen Co-Doped Carbon Nanofiber Skeleton for Sodium-Ion Batteries

Effective strategies toward building exquisite nanostructures with enhanced structural integrity and improved reaction kinetics will carry forward the practical application of alloy-based materials as anodes in batteries. Herein, a free-standing 3D carbon nanofiber (CNF) skeleton incorporated with heterostructured binary metal selenides (ZnSe/SnSe) nanoboxes is developed for Na-ion storage anodes, which can facilitate Na+ ion migration, improve structure integrity, and enhance the electrochemical reaction kinetics. During the carbonization and selenization process, selenium/nitrogen (Se/N) is co-doped into the 3D CNF skeleton, which can improve the conductivity and wettability of the CNF matrices. More importantly, the ZnSe/SnSe heterostructures and the Se/N co-doping CNFs can have a synergistic interfacial coupling effect and built-in electric field in the heterogeneous interfaces of ZnSe/SnSe hetero-boundaries as well as the interfaces between the CNF matrix and the selenide heterostructures, which can enable fast ion/electron transport and accelerate surface/internal reaction kinetics for Na-ion storage. The ZnSe/SnSe@Se,N-CNFs exhibit superior Na-ion storage performance than the comparative ZnSe/SnSe, ZnSe and SnSe powders, which deliver an excellent rate performance (882.0, 773.6, 695.7, 634.2, and 559.0 mAh g-1 at current rates of 0.1, 0.2, 0.5, 1, and 2 A g-1) and long-life cycling stability of 587.5 mAh g-1 for 3500 cycles at 2 A g-1.

Facilitating Rapid Na+ Storage through MoWSe/C Heterostructure Construction and Synergistic Electrolyte Matching Strategy

The realization of sodium-ion devices with high-power density and long-cycle capability is challenging due to the difficulties of carrier diffusion and electrode fragmentation in transition metal selenide anodes. Herein, a Mo/W-based metal-organic framework is constructed by a one-step method through rational selection, after which MoWSe/C heterostructures with large angles are synthesized by a facile selenization/carbonization strategy. Through physical characterization and theoretical calculations, the synthesized MoWSe/C electrode delivers obvious structural advantages and excellent electrochemical performance in an ethylene glycol dimethyl ether electrolyte. Furthermore, the electrochemical vehicle mechanism of ions in the electrolyte is systematically revealed through comparative analyses. Resultantly, ether-based electrolytes advantageously construct stable solid electrolyte interfaces and avoid electrolyte decomposition. Based on the above benefits, the Na half-cell assembled with MoWSe/C electrodes demonstrated excellent rate capability and a high specific capacity of 347.3 mA h g-1 even after cycling 2000 cycles at 10 A g-1. Meanwhile, the constructed sodium-ion capacitor maintains ∼80% capacity retention after 11,000 ultralong cycles at a high-power density of 3800 W kg-1. The findings can broaden the mechanistic understanding of conversion anodes in different electrolytes and provide a reference for the structural design of anodes with high capacity, fast kinetics, and long-cycle stability.

Construction of Sugar-Gourd-Shaped Carbon Nanofibers Embedded with Heterostructured Zinc-Cobalt Selenide Nanocages for Superior Potassium-Ion Storage

Transition metal selenides are considered as promising anode materials for potassium-ion batteries (PIBs) due to their high theoretical capacities. However, their applications are limited by low conductivity and large volume expansion. Herein, sugar-gourd-shaped carbon nanofibers embedded with heterostructured ZnCo-Se nanocages are prepared via a facile template-engaged method combined with electrospinning and selenization process. In this hierarchical ZnCo-Se@NC/CNF, abundant phase boundaries of CoSe2/ZnSe heterostructure can promote interfacial electron transfer and chemical reactivity. The interior porous ZnCo-Se@NC nanocage structure relieves volume expansion and maintains structural integrity during K+ intercalation and deintercalation. The exterior spinning carbon nanofibers connect the granular nanocages in series, which prevents the agglomeration, shortens the electron transport distance and enhances the reaction kinetics. As a self-supporting anode material, ZnCo-Se@NC/CNF delivers a high capacity (362 mA h g-1 at 0.1 A g-1 after 100 cycles) with long-term stability (95.9% capacity retention after 1000 cycles) and shows superior reaction kinetics with high-rate K-storage. Energy level analysis and DFT calculations illustrate heterostructure facilitates the adsorption of K+ and interfacial electron transfer. The K+ storage mechanism is revealed by ex situ XRD and EIS analyses. This work opens a novel avenue in designing high-performance heterostructured anode materials with ingenious structure for PIBs.

Stress Dissipation Driven by Multi-Interface Built-In Electric Fields and Desert-Rose-Like Structure for Ultrafast and Superior Long-Term Sodium Ion Storage

The kinetics and durability of conversion-based anodes greatly depend on the intrinsic stress regulating ability of the electrode materials, which has been significantly neglected. Herein, a stress dissipation strategy driven by multi-interface built-in electric fields (BEFs) and architected structure, is innovatively proposed to design ultrafast and long-term sodium ion storage anodes. Binary Mo/Fe sulfide heterostructured nanorods with multi-interface BEFs and staggered cantilever configuration are fabricated to prove our concept. Multi-physics simulations and experimental results confirm that the inner stress in multiple directions can be dissipated by the multi-interface BEFs at the micro-scale, and by the staggered cantilever structure at the macro-scale, respectively. As a result, our designed heterostructured nanorods anode exhibits superb rate capability (332.8 mAh g-1 at 10.0 A g-1 ) and durable cyclic stability over 900 cycles at 5.0 A g-1 , outperforming other metal chalcogenides. This proposed stress dissipation strategy offers a new insight for developing stable structures for conversion-based anodes.

Hollow CoSe2-ZnSe microspheres inserted in reduced graphene oxide serving as advanced anodes for sodium ion batteries

Transition metal selenides are promising anode candidates for sodium ion batteries (SIBs) because of their higher theoretical capacity and conductivity than metal oxides. However, the disadvantages of severe capacity degradation and poor magnification performance greatly limit their commercial applications. Herein, we have developed a new hollow bimetallic selenides (CoSe2-ZnSe)@reduced graphene oxide (rGO) composite with abundant heterointerfaces. The rGO could not only alleviate the volume variations of hollow CoSe2-ZnSe microspheres during cycling, but also improve the conductivity of composite. The presence of the heterointerfaces could help to accelerate ionic diffusion kinetics and improve electron transfer, resulting in the improved sodium storage performance. As an advanced anode for SIBs, the CoSe2-ZnSe@rGO exhibits an enhanced initial coulombic efficiency of 75.1% (65.2% of CoSe2@rGO), extraordinary rate capability, and outstanding cycling stability (540.3 mAh/g at 0.2 A/g after 150 cycles, and 395.2 mAh/g at 1 A/g after 600 cycles). The electrochemical mechanism was also studied by kinetic analysis, showing that the charging/discharging process of CoSe2-ZnSe@rGO is mostly related to a capacitive-controlled behavior.

Yolk-Shell MnSe/ZnSe Heterostructures with Selenium Vacancies Encapsulated in Carbontubes for High-Efficiency Sodium/Potassium Storage

The pursuit of high-performance batteries has propelled the investigation into advanced materials and design methodologies. Herein, the yolk-shell MnSe/ZnSe heterojunction encapsulated in hollow carbontubes (MnSe/ZnSe@HCTs) is prepared as a prospective electrode material for sodium/potassium batteries. The band structure in the heterojunction is methodically adjusted and regulated by intentionally utilizing Mn with unpaired electrons in the 3d orbital. The ZnSe shell confer effectively mitigates volumetric expansion challenges inherent in ions insertion/extraction processes and 1D carbontubular conductive substrate avert the aggregation of MnSe/ZnSe nanoparticles. Concurrently, the heterojunctions implantation induces sublattice distortion and charge redistribution, enriching active sites and regulating band structure. The selenium vacancies within these heterojunctions contribute to the provision of abundant active sites, thereby promoting efficient ions insertion/extraction. In sodium-ion batteries (SIBs), MnSe/ZnSe@HCTs present a superior capacity of 475 mA hg-1 at 0.1 A g-1 and sustains a capacity of 408.5 mAh g-1 even after 1000 cycles. In potassium-ion batteries (KIBs), MnSe/ZnSe@HCTs deliver a higher specific capacity of 422 mAh g-1 at a current density of 0.1 A g-1 and maintain a high coulombic efficiency of 99% after 1000 cycles. The yolk-shell structured MnSe/ZnSe heterojunction demonstrates excellent electrode properties for high-performance sodium/potassium batteries, holding significant promise for future energy storage applications.

Atomic insight into the effects of precursor clusters on monolayer WSe2

Two-dimensional (2D) transition metal dichalcogenides (TMDCs) have been attracting much attention due to their rich physical and chemical properties. At the end of the chemical vapor deposition growth of 2D TMDCs, the adsorption of excess precursor clusters onto the sample is unavoidable, which will have significant effects on the properties of TMDCs. This is a concern to the academic community. However, the structures of the supported precursor clusters and their effects on the properties of the prepared 2D TMDCs are still poorly understood. Herein, taking monolayer WSe2 as the prototype, we investigated the structure and electronic properties of SeN, WN (N = 1-8), and W8-NSeN (N = 1-7) clusters adsorbed on monolayer WSe2 to gain atomic insight into the precursor cluster adsorption. In contrast to W clusters that tightly bind to the WSe2 surface, Se clusters except for Se1 and Se2 are weakly adsorbed onto WSe2. The interaction between W8-NSeN (N = 1-7) clusters and the WSe2 monolayer decreases with the increase in the Se/W ratio and eventually becomes van der Waals interaction for W1Se7. According to the phase diagram, increasing the Se/W ratio by changing the experimental conditions will increase the ratio of SeN and W1Se7 clusters in the precursor, which can be removed by proper annealing after growth. W clusters induce lots of defect energy levels in the band gap region, while the adsorption of W1Se7 and SeN clusters (N = 3-6, 8) promotes the spatial separation of photo generated carriers at the interface, which is important for optoelectronic applications. Our results indicate that by controlling the Se/W ratio, the interaction between the precursor clusters and WSe2 as well as the electronic properties of the prepared WSe2 monolayer can be effectively tuned, which is significant for the high-quality growth and applications of WSe2.

Boosting Potassium Storage via Multifunctional Interface with High Lattice-Matching

Atomic-scale interface engineering is a prominent strategy to address the large volume expansions and sluggish redox kinetics for reinforcing K-storage. Here, to accelerate charge transport and lower the activation energy, dual carbon-modified interfacial regions are synthesized with high lattice-matching degree, which is formed from a CoSe2 /FeSe2 heterostructure coated onto hollow carbon fibers. State-of-the-art characterization techniques and theoretical analysis, including ex-situ soft X-ray absorption spectroscopy, synchrotron X-ray tomography, ultrasonic transmission mapping, and density functional theory, are conducted to probe local atomic structure evolution, mechanical degradation mechanisms, and ion/electron migration pathways. The results suggest that the heterostructure composed of the same crystal system and space group can sharply regulate the redox kinetics of transition metal selenium and dual carbon-modified approach can tailor physicochemical degradation. Overall, this work presents the design of a stable heterojunction synergistic superior hollow carbon substrate, inspiring a pathway of interface engineering strategy toward high-performance electrode.

Coral-like CoSe2@N-doped carbon with a high initial coulombic efficiency as advanced anode materials for Na-ion batteries

Na-ion batteries (NIBs) have attracted great interest as a possible technology for grid-scale energy storage for the past few years owing to the wide distribution, low cost and environmental friendliness of sodium resources and similar chemical mechanisms to those of established Li-ion batteries (LIBs). Nonetheless, the implementation of NIBs is seriously hindered because of their low rate capability and cycling stability. This is mainly because the large ionic size of Na+ can reduce the structural stability and cause sluggish reaction kinetics of electrode materials. Herein, three-dimensional nanoarchitectured coral-like CoSe2@N-doped carbon (CL-CoSe2@NC) was synthesized through solvothermal and selenizing techniques. As a result, CL-CoSe2@NC for NIBs at 2 A g-1 exhibits an ultrahigh specific capacity of 345.4 mA h g-1 after 2800 cycles and a superhigh initial coulombic efficiency (ICE) of 93.1%. Ex situ XRD, HRTEM, SAED and XPS were executed to study the crystal structure evolution between Na and CoSe2 during sodiation/de-sodiation processes. The aforementioned results indicate that the improved sodium storage property of CL-CoSe2@NC could be attributed to better electrode kinetics and a stable SEI film because of the 3D nanoarchitecture and the existence of the NC layer.

Metal Selenides Find Plenty of Space in Architecting Advanced Sodium/Potassium Ion Batteries

The rapid evolution of smart grid system urges researchers on exploiting systems with properties of high-energy, low-cost, and eco-friendly beyond lithium-ion batteries. Under the circumstances, sodium- and potassium-ion batteries with the semblable work mechanism to commercial lithium-ion batteries, hold the merits of cost-effective and earth-abundant. As a result, it is deemed a promising candidate for large-scale energy storage devices. Exploiting appropriate active electrode materials is in the center of the spotlight for the development of batteries. Metal selenides with special structures and relatively high theoretical capacity have aroused broad interest and achieved great achievements. To push the smooth development of metal selenides and enhancement of the electrochemical performance of sodium- and potassium-ion batteries, it is vital to grasp the inherent properties and electrochemical mechanisms of these materials. Herein, the state-of-the-art development and challenges of metal selenides are summarized and discussed. Meanwhile, the corresponding electrochemical mechanism and future development directions are also highlighted.

Reduced Graphene Oxide Modulated FeSe/C Anode Materials for High-Stable and Long-Life Potassium-Ion Batteries

Reduced graphene oxide (rGO) has been demonstrated to effectively enhance the potassium storage performance of transition metal selenides due to its robust mechanical properties and high conductivity. However, the impact of rGO on the electrode-electrolyte interface, a crucial factor in the electrochemical performance of potassium-ion batteries (PIBs), requires further exploration. In this study, we synthesized a seamless architecture of rGO on FeSe/C nanocrystals (FeSe/C@rGO). Comparative analysis between FeSe/C and FeSe/C@rGO reveals that the rGO layer exhibits robust adsorption energies towards EC and DEC, inducing the formation of organic-rich solid-electrolyte interphase (SEI) without damage to the structural integrity. Furthermore, incorporating rGO triggers K+ -ions into the double electrode layer (EDL), markedly improving the transport of K+ -ions. As a PIB anode, FeSe/C@rGO exhibits a reversible capacity of 332 mAh g-1 at 200 mA g-1 after 300 cycles, along with excellent long-term cycling stability, showcasing an ultralow decay rate of only 0.086 % per cycle after 1900 cycles at 1000 mA g-1 .

Synergistic γ-In2 Se3 @rGO Nanocomposites with Beneficial Crystal Transformation Behavior for High-Performance Sodium-Ion Batteries

Crystal transformation of metal compound cathodes during charge/discharge processes in alkali metal-ion batteries usually generates profound impact on structural stability and electrochemical performance, while the theme in anode materials, which always occurs and completes during the first redox cycle, is rarely explored probably due to the fast transformation dynamics. Herein, for the first time, a unique crystal transformation behavior with slow dynamics in anode of sodium-ion batteries (SIBs) is reported, which further promotes electrochemical performance. Specifically, irreversible γ → β crystal transformation of In2 Se3 is observed, induced by the persistent size degradation of In2 Se3 particles during repeated sodiation/desodiation, supported by a series of ex situ characterizations, such as HRTEM, XRD, and XPS of γ-In2 Se3 /reduced graphene oxide (γ-In2 Se3 @rGO) nanocomposite. The hybrid electrode shows ultrahigh long-term cycling stability (378 mA h g-1 at 1.0 A g-1 after 1000 cycles) and excellent rate capability (272 mA h g-1 at 20.0 A g-1 ). Full battery with Na3 V2 (PO4 )3 cathode also manifests superior performance, promising β-In2 Se3 dominated electrode materials in high-power and long-life SIBs. The first-principle calculations suggest the crystal transformation enhances electric conductivity of β-In2 Se3 and facilitates its accessibility to sodium. In combination with the synergistic effect between rGO matrix, substantially enhanced electrochemical performance is realized.

Homologous Heterostructured NiS/NiS2 @C Hollow Ultrathin Microspheres with Interfacial Electron Redistribution for High-Performance Sodium Storage

Nickel sulfides with high theoretical capacity are considered as promising anode materials for sodium-ion batteries (SIBs); however, their intrinsic poor electric conductivity, large volume change during charging/discharging, and easy sulfur dissolution result in inferior electrochemical performance for sodium storage. Herein, a hierarchical hollow microsphere is assembled from heterostructured NiS/NiS2 nanoparticles confined by in situ carbon layer (H-NiS/NiS2 @C) via regulating the sulfidation temperature of the precursor Ni-MOFs. The morphology of ultrathin hollow spherical shells and confinement of in situ carbon layer to active materials provide rich channels for ion/electron transfer and alleviate the effects of volume change and agglomeration of the material. Consequently, the as-prepared H-NiS/NiS2 @C exhibit superb electrochemical properties, satisfactory initial specific capacity of 953.0 mA h g-1 at 0.1 A g-1 , excellent rate capability of 509.9 mA h g-1 at 2 A g-1 , and superior longtime cycling life with 433.4 mA h g-1 after 4500 cycles at 10 A g-1 . Density functional theory calculation shows that heterogenous interfaces with electron redistribution lead to charge transfer from NiS to NiS2 , and thus favor interfacial electron transport and reduce ion-diffusion barrier. This work provides an innovative idea for the synthesis of homologous heterostructures for high-efficiency SIB electrode materials.

A nanowire-assembled Co3S4/Cu2S@carbon binary metal sulfide hybrid as a sodium-ion battery anode displaying high capacity and recoverable rate-performance

A binary metal sulfide hybrid consisting of nanowire-assembled and polypyrrole-coated Co3S4/Cu2S spheres after nitrogen-doped carbon coating (Co3S4/Cu2S@NC) is developed as an anode, which displays a capacity exceeding 412.3 mA h g-1 after 550 cycles under 1.0 A g-1. Recoverable rate-performance and good temperature tolerance under 50 °C and -10 °C are achievable; a full cell delivers 339.5 mA h g-1, indicating promising potential for applications in various conditions.

Small-Molecule Organic Cathodes with Carbon Coating for Highly Efficient Potassium-ion Batteries

Small-molecule organic cathodes face dissolution in potassium-ion batteries (PIBs). For the first time, an interesting and effective strategy is unveiled to resolve this issue by designing a new soluble small-molecule organic compound namely [N,N'-bis(2-anthraquinone)]-1,4,5,8-naphthalenetetracarboxdiimide (NTCDI-DAQ, 237 mAh g-1 ): Through the precise manipulation of carbonization temperature and time, the molecules on the surface of NTCDI-DAQ particles can be transformed into amorphous carbon with controllable thickness. This strategy called surface self-carbonization can form a carbon protective layer on organic cathodes and significantly increase their insolubility against liquid electrolytes without affecting the electrochemical behavior of bulk particles. As a result, the as-obtained NTCDI-DAQ@C sample displays significantly improved cathode performance in PIBs. In half cells, NTCDI-DAQ@C shows superior capacity stability of 84 % compared to 35 % of NTCDI-DAQ during 30 cycles under the same conditions. In full cells with a KC8 anode, NTCDI-DAQ@C delivers a peak discharge capacity of 236 mAh g-1 cathode and a high energy density of 255 Wh kg-1 cathode in 0.1-2.8 V, with 40 % capacity retention during 3000 cycles at 1 A g-1 . To the best of our knowledge, the integrated performance of NTCDI-DAQ@C is among the best of soluble organic cathodes reported in PIBs.

Bonding iron chalcogenides in a hierarchical structure for high-stability sodium storage

Owing to price-boom and low-reserve of Lithium ion batteries (LIBs), cost-cutting and well-stocked sodium ion batteries (SIBs) attract a lot of attention, aiming to develop an effective energy storage and conversion equipment. As a typical anode for SIBs, Iron sulfide (FeS) is difficult to maintain the high theoretical capacity. Structural instability and inherent low conductivity limit the cyclic and rate performance of FeS. Herein, hierarchical architecture of FeS-FeSe₂ coated with nitrogen-doped carbon (NC) is obtained by single-step solvothermal method and two-stage high-temperature treatments. Specifically, lattice imperfections provided by heterogeneous interfaces increase the Na⁺ storage sites and fasten ion/electron transfer. Synergistic effect induced by the hierarchical architecture effectively enhances the electrochemical activity and reduces the resistance, which contributes to the transfer kinetics of Na⁺. In addition, the phenomenon that heterogeneous interfaces provide more active site and extra migration Na⁺ path is also proved by density functional theory (DFT). As an anode for SIBs, FeS-FeSe₂/NC (FSSe/C) delivers highly reversible capacity (704.5 mAh·g^-1 after 120 cycles at 0.2 A·g^-1), excellent rate performance (326.3 mAh·g^-1 at 12 A·g^-1) and long-lasting durability (492.3 mAh·g^-1 after 1000 cycles at 4 A·g^-1 with 100 % capacity retention). Notably, the full battery, assembled with FSSe/C and Na₃V₂(PO₄)₃/C (NVP/C), delivers reversible capacity of 252.1 mAh·g^-1 after 300 cycles at 1 A·g^-1. This work provides a facile method to construct a hierarchical architecture anode for high-performance SIBs.

Synergistically Achieving Superior Sodium Storage of Metal Selenides by Constructing N-Doped Carbon Foams and Utilizing Cu-Driven Replacement Reaction

Metal selenides are considered as one of the most promising anode materials for Na-ion batteries owing to high specific capacity and relatively higher electronic conductivity compared with metal sulfides or oxides. However, such anodes still suffer from huge volume change upon repeated Na⁺ insertion/extraction processes and simultaneously undergo severe shuttle effect of polyselenides, thus leading to poor electrochemical performance. Herein, a facile chemical-blowing and selenization strategy to fabricate 3D interconnected hybrids built from metal selenides (MSe, M = Mn, Co, Cr, Fe, In, Ni, Zn) nanoparticles encapsulated in in situ formed N-doped carbon foams (NCFs) is reported. Such hybrids not only provide ultrasmall active nanobuilding blocks (≈15 nm), but also efficiently anchor them inside the conductive NCFs, thus enabling both high-efficiency utilization of active components and high structural stability. On the other hand, Cu-driven replacement reaction is utilized for efficiently inhibiting the shuttle effect of polyselenides in ether-based electrolyte. Benefiting from the combined merits of the unique MSe@NCFs and the utilization of the conversion of metal selenides to copper selenides, the as-obtained hybrids (MnSe as an example) exhibit superior rate capability (386.6 mAh g^-1 up to 8 A g^-1 ) and excellent cycling stability (347.7 mAh g^-1 at 4.0 A g^-1 after 1200 cycles).

Pore Perforation of Graphene Coupled with In Situ Growth of Co3 Se4 for High-Performance Na-Ion Battery

Graphene-based nanomaterials have sprung up as promising anode materials for sodium-ion batteries due to the intriguing properties of graphene itself and the synergic effect between graphene and active materials. However, the 2D graphene sheet only allows the rapid diffusion of sodium ions along the parallel direction while that of the vertical direction is difficult, limiting the rate capability of graphene-based electrode materials. To tackle this problem, pore-forming engineering has been employed to perforate graphene and concurrently achieve the in situ growth of Co₃ Se₄ nanoparticles. The generation of in-plane nanohole breaks through the physical barriers of the graphene nanosheets, enabling the fast diffusion of electrolyte ions in the longitudinal direction. In addition, this design limits the aggregation of Co₃ Se₄ nanoparticles because of the high affinity of Co₃ Se₄ on graphene. Benefiting from the high conductivity and fast ion transport bestowed by the ingenious architecture, the Co₃ Se₄ /holey graphene exhibits a remarkable rate performance of 519.5 mAh g^-1 at 5.0 A g^-1 and desirable cycle stability. Conclusions drawn from this investigation are that the transport of sodium inside the graphene-based composites is crucial for rate performance enhancement and this method is effective in modifying graphene-based nanomaterials as potential anode materials.

Nickel sulfide/nickel phosphide heterostructures anchored on porous carbon nanosheets with rapid electron/ion transport dynamics for sodium-ion half/full batteries

Nickel-based materials have been extensively deemed as promising anodes for sodium-ion batteries (SIBs) owing to their superior capacity. Unfortunately, the rational design of electrodes as well as long-term cycling performance remains a thorny challenge due to the huge irreversible volume change during the charge/discharge process. Herein, the heterostructured ultrafine nickel sulfide/nickel phosphide (NiS/Ni₂P) nanoparticles closely attached to the interconnected porous carbon sheets (NiS/Ni₂P@C) are designed by facile hydrothermal and annealing methods. The NiS/Ni₂P heterostructure promotes ion/electron transport, thus accelerating the electrochemical reaction kinetics benefited from the built-in electric field effect. Moreover, the interconnected porous carbon sheets offer rapid electron migration and excellent electronic conductivity, while releasing the volume variance during Na⁺ intercalation and deintercalation, guaranteeing superior structural stability. As expected, the NiS/Ni₂P@C electrode exhibits a high reversible specific capacity of 344 mAh g^-1 at 0.1 A g^-1 and great rate stability. Significantly, the implementation of NiS/Ni₂P@C//Na₃(VPO₄)₂F₃ SIB full cell configuration exhibits relatively satisfactory cycle performance, which suggests its widely practical application. This research will develop an effective method for constructing heterostructured hybrids for electrochemical energy storage.

Sandwich-type CoSe2-CNWs@rGO/S composites with efficient trapping and catalytic conversion of polysulfides in lithium-sulfur batteries

Although lithium-sulfur batteries (LSBs) are very promising in energy storage devices, their low conductivity, shuttle effect, and volume expansion unfavorably lead to sluggish kinetics and worsening electrochemical performance. To address these problems, we firstly prepared conductive carbon nanowires embedded with lithiophilic CoSe₂ nanoparticles (CoSe₂-CNWs), and utilized CoSe₂-CNWs to construct reduced graphene oxide (rGO) sheets; thereby, sandwich-type CoSe₂-CNWs@rGO composites were assembled. CoSe₂-CNWs@rGO composites were taken as the sulfur host. Due to the alternating rGO sheets and active sulfur, the special sandwich structure can maximize the use of sulfur, confine polysulfides physically, favor electron transport, and cushion the volume change during cycling. The interlayer CoSe₂-CNWs network also can entrap polysulfides chemically, promote the electron transfer, and improve the reaction kinetics, owing to the synergetic merits of high polarity and conductivity. Compared with CoSe₂-CNWs/S and Co-CNWs/S, the CoSe₂-CNWs@rGO/S cathode shows a significant improvement in cell performance. Its specific capacity decreases from 1137.9 mA h g^-1 at 0.1 C to 649.7 mA h g^-1 at 2 C, demonstrating the optimal rate performance. The cycling capacity also slowly reduces from 975.4 mA h g^-1 to 839.7 mA h g^-1 after 150 cycles at 0.5 C, showing a high retention of 86.1% with a tiny average fading rate (0.093%).

Synergistic Engineering of Se Vacancies and Heterointerfaces in Zinc-Cobalt Selenide Anode for Highly Efficient Na-Ion Batteries

The exploitation of effective strategies to accelerate the Na⁺ diffusion kinetics and improve the structural stability in the electrode is extremely important for the development of high efficientcy sodium-ion batteries. Herein, Se vacancies and heterostructure engineering are utilized to improve the Na⁺ -storage performance of transition metal selenides anode prepared through a facile two-in-one route. The experimental results coupled with theoretical calculations reveal that the successful construction of the Se vacancies and heterostructure interfaces can effectively lower the Na⁺ diffusion barrier, accelerate the charge transfer efficiency, improve Na⁺ adsorption ability, and provide an abundance of active sites. Consequently, the batteries based on the constructed ZnSe/CoSe₂ -CN anode manifest a high initial Coulombic efficiency (97.7%), remarkable specific capacities (547.1 mAh g^-1 at 0.5 A g^-1 ), superb rate capability (362.1 mAh g^-1 at 20 A g^-1 ), as well as ultrastable long-term stability (1000 cycles) with a satisfied specific capacity (535.6 mAh g^-1 ) at 1 A g^-1 . This work facilitates an in-depth understanding of the synergistic effect of vacancies and heterojunctions in improving the Na⁺ reaction kinetics, providing an effective strategy to the rational design of key materials for high efficiency rechargeable batteries.

Sn-, Sb- and Bi-Based Anodes for Potassium Ion Battery

Owing to the abundant resources of potassium resources, potassium ion batteries (PIBs) hold great potential in various energy storage devices. However, the poor lifespan of PIBs anodes limit their merchant applications. The exploitation of anode materials with high performance is one of the critical factors to the development of PIBs. Metallic Sn-, Sb-, and Bi-based materials, show promising future thanks to their high theoretical capacities and safe working voltage. However, the rapid capacity decay caused by the large K⁺ is still a pivotal challenge. In this review, recent progresses on alloying anodes were summarized. Schemes, such as ultra-small nanoparticles, hetero-element doping, and electrolyte optimization are effective strategies to improve their electrochemical properties. This review provides an outlook on the nanostructures and their synthesis methods for the alloying-type materials, and will stimulate their intensive study for practical application in the near future.

The Multicomponent Synergistic Effect of Sandwich Structure Hierarchical Nanofibers for Enhanced Sodium Storage

Constructing hierarchical micro/nanostructures as anodes for sodium ion batteries is an important approach for exploiting efficient energy storage devices. Herein, sandwich structure hierarchical nanofibers composed of hollow carbon fibers as the substrate, and MoS₂ as the interlayer with Co and/or ZnS nanoparticles anchoring in carbon skeletons as the outer shell (carbon nanofiber/MoS₂ /Co-ZnS⊂NC) are prepared via a multistep reaction strategy. Profiting from the unique hierarchical structure, abundant migration channels of Na⁺ , and multicomponent synergistic effects, the rapid diffusion kinetics are ensured and the utilization of active materials is maximized. The coaxial structure can evenly disperse volumetric strain, making structural stability guaranteed. Hierarchical nanofibers deliver a high reversible capacity of 352.3 mAh g^-1 at 5.0 A g^-1 over 3000 cycles. A discharge capacity of 182.5 mAh g^-1 is retained even after 10 000 cycles at 10.0 A g^-1 as well as a high rate capacity of 202.0 mAh g^-1 up to 30 A g^-1 . The optimal atomic ratio of Co element is further verified by the kinetic analysis. The full-cells assembled with Na₃ V₂ (PO₄ )₃ cathode provide a high capacity of 179.2 mAh g^-1 at 1.0 A g^-1 for 500 cycles. Combining in situ and ex situ characterizations and theoretical calculations, possible sodium storage mechanisms and the origin of superior electrochemical properties are revealed.