Revealing Size Dependent Structural Transitions in Supported Gold Nanoparticles in Hydrogen at Atmospheric Pressure

Generation and persistency of combustion-derived environmentally persistent free radicals from phenolic compounds over a Fe2O3/SiO2 surface

Combustion of organic solid wastes releases phenolic compounds which can act as precursors in the formation of environmentally persistent free radicals (EPFRs) in the post-flame, cooling zone of waste combustion. The study investigated the generation mechanism of EPFRs from phenolic compounds catalyzed by transition metals in air atmosphere under simulated combustion conditions. Representative combustion-derived phenolic compounds were used, and SiO2 particulates containing different mass ratio of Fe2O3 were synthesized as carriers. EPFRs formed had g-factors between 1.9998 and 2.0066, indicating phenoxyl-, cyclopentadienyl-, and semiquinone-type radicals, along with paramagnetic F-centers. The promotion effect of phenolic compounds on EPFR formation during heating decreased as catechol > hydroquinone > phenol > p-cresol. This trend is related to hydroxyl groups and activation energy. In particular, catechol chemically adsorbed on Fe2O3 at 600 K led to the formation of EPFRs with relatively high spin concentrations (up to 1.28 × 1017 spin/g). Higher Fe2O3 concentrations promoted the transformation of phenoxyl-type radicals into cyclopentadienyl-type and paramagnetic F-centers. However, as the Fe2O3 loading increased from 1.25% to 5%, the density of EPFRs decreased. The findings related to the influence of various precursors and Fe2O3 concentration on EPFR formation provide valuable insights for estimating EPFR generation and associated risk during combustion processes.

Hydrogen adsorption on various transition metal (111) surfaces in water: a DFT forecast

The hydrogen adsorption and hydrogen evolution at the M(111), (M = Ag, Au Cu, Pt, Pd, Ni & Co) surfaces of various transition metals in aqueous suspensions were studied computationally using the DFT methods. The hydrogens are adsorbed dissociatively on all surfaces except on Ag(111) and Au(111) surfaces. The results are validated by reported experimental and computational studies. Hydrogen atoms have large mobility on M(111) surfaces due to the small energy barriers for diffusion on the surface. The hydrogen evolution via the Tafel mechanism is considered at different surface coverage ratios of hydrogen atoms and is used as a descriptor for the hydrogen adsorption capacity on M(111) surfaces. All calculations are performed without considering how the hydrogen atoms are formed on the surface. The hydrogen adsorption energies decrease with the increase in the surface coverage of hydrogen atoms. The surface coverage for the H2 evolution depends on each M(111) surface. Among the considered M(111) surfaces, Au(111) has the least hydrogen adsorption capacity and Ni, Co and Pd have the highest. Furthermore, experiments proving that after the H2 evolution reaction (HER) on Au0-NPs, and Ag0-NPs surfaces some reducing capacity remains on the M0-NPs is presented.

In Situ TEM Characterization and Modulation for Phase Engineering of Nanomaterials

Solid-state phase transformation is an intriguing phenomenon in crystalline or noncrystalline solids due to the distinct physical and chemical properties that can be obtained and modified by phase engineering. Compared to bulk solids, nanomaterials exhibit enhanced capability for phase engineering due to their small sizes and high surface-to-volume ratios, facilitating various emerging applications. To establish a comprehensive atomistic understanding of phase engineering, in situ transmission electron microscopy (TEM) techniques have emerged as powerful tools, providing unprecedented atomic-resolution imaging, multiple characterization and stimulation mechanisms, and real-time integrations with various external fields. In this Review, we present a comprehensive overview of recent advances in in situ TEM studies to characterize and modulate nanomaterials for phase transformations under different stimuli, including mechanical, thermal, electrical, environmental, optical, and magnetic factors. We briefly introduce crystalline structures and polymorphism and then summarize phase stability and phase transformation models. The advanced experimental setups of in situ techniques are outlined and the advantages of in situ TEM phase engineering are highlighted, as demonstrated via several representative examples. Besides, the distinctive properties that can be obtained from in situ phase engineering are presented. Finally, current challenges and future research opportunities, along with their potential applications, are suggested.

Cu segregation in Au-Cu nanoparticles exposed to hydrogen atmospheric pressure: how is fcc symmetry maintained?

In a recent work [A. Nassereddine et al., Small 2021, 17, 2104571] we reported the atomic-scale structure and dynamics of sub-4 nm sized Au nanoparticles (NPs) supported on titania in H₂ at atmospheric pressure obtained by using aberration-corrected environmental transmission electron microscopy (ETEM), density functional theory (DFT) optimizations and ab initio molecular dynamic (AIMD) simulations. Our results showed unstable Au NPs losing their face-centred cubic (fcc) symmetry (from fcc to non-fcc symmetries) and revealed the drastic effect of hydrogen adsorption. In this work, we use the same approach to study the dynamics of equiatomic Au-Cu NPs in the same range of size and the results show an enhanced structural stability upon alloying by Cu. In spite of the morphology evolution from facetted to rounded shapes, the observed Au-Cu NPs are found to keep their fcc symmetry under atmospheric hydrogen pressure. AIMD simulation evidences a Cu segregation process from the sub-surface toward the upper surface layer, and a reversed segregation of Au atoms from the surface towards the sub-surface sites. The analysis of the chemical ordering in the core shows a tendency to a local chemical ordering where Au-Cu hetero-atomic bindings are favoured. The segregating Cu seems to play a major role in reducing the fluxionality of Au-Cu NPs in H₂ and thus, maintaining their fcc symmetry.

Synthesis and structural properties of high-entropy nanoalloys made by physical and chemical routes

The development of synthesis methods with enhanced control over the composition, size and atomic structure of High Entropy Nano-Alloys (HENA) could give rise to a new repertoire of nanomaterials with unprecedented functionalities, notably for mechanical, catalytic or hydrogen storage applications. Here, we have developed two original synthesis methods, one by a chemical route and the other by a physical one, to fabricate HENA with a size between 3 and 10 nm and a face centered cubic structure containing three (CoNiPt), four (CoNiPtCu and CoNiPtAu) or five (CoNiPtAuCu) metals close to the equiatomic composition. The key point in the proposed chemical synthesis method is to compensate the difference in reactivity of the different metal precursors by increasing the synthesis temperature using high boiling solvents. Physical syntheses were performed by pulsed laser ablation using a precise alternating deposition of the individual metals on a heated amorphous carbon substrate. Finally, we have exploited aberration-corrected transmission electron microscopy to explore the nanophase diagram of these nanostructures and reveal intrinsic thermodynamic properties of those complex nanosystems. In particular, we have shown (i) that the complete mixing of all elements can only occur close to the equiatomic composition and (ii) how the Ostwald ripening during HENA synthesis can induce size-dependent deviations from the equiatomic composition leading to the formation of large core-shell nanoparticles.

The nature of stability and adsorption interactions of binary Au-Li clusters with bridge adsorption structures

Earlier findings have confirmed that CO molecules have propensities to adsorb on low-coordinated gold atoms (top sites) of Au-based clusters, which can be treated by the Blyholder model wherein the σ donation and π-back donation take place. Here, the structural features and stability of (AuLi)_n (n = 1-9) clusters were first analyzed using the GA-DFT method. The new adsorption modes, vibration frequencies and electronic interactions for Au-Li clusters with CO were investigated in detail. More excitingly, we found that CO prefers to adsorb on the bridge sites of the Au-Li clusters rather than on the top sites, which are much lower in energies than the top adsorptions, and the C-O stretching frequencies are also red-shifted. AIMD simulations show that the adsorption structures still have good thermal stability at 500 K. The density of states reveals that the electronic structures of Au-Li clusters have excellent stability for the bridge adsorptions of CO molecules. The ETS-NOCV analysis and NPA charges show that the direction of charge flow is from Au-Li clusters → CO. Our study provides an idea to elucidate the new adsorption mechanism on Au-Li clusters and the connection between the geometries and reaction properties.

Single Metal Atoms Embedded in the Surface of Pt Nanocatalysts: The Effect of Temperature and Hydrogen Pressure

Embedding energetically stable single metal atoms in the surface of Pt nanocatalysts exposed to varied temperature (T) and hydrogen pressure (P) could open up new possibilities in selective and dynamical engineering of alloyed Pt catalysts, particularly interesting for hydrogenation reactions. In this work, an environmental segregation energy model is developed to predict the stability and the surface composition evolution of 24 Metal M-promoted Pt surfaces (with M: Cu, Ag, Au, Ni, Pd, Co, Rh and Ir) under varied T and P. Counterintuitive to expectations, the results show that the more reactive alloy component (i.e., the one forming the strongest chemical bond with the hydrogen) is not the one that segregates to the surface. Moreover, using DFT-based Multi-Scaled Reconstruction (MSR) method and by extrapolation of M-promoted Pt nanoparticles (NPs), the shape dynamics of M-Pt are investigated under the same ranges of T and P. The results show that under low hydrogen pressure and high temperature ranges, Ag and Au—single atoms (and Cu to a less extent) are energetically stable on the surface of truncated octahedral and/or cuboctahedral shaped NPs. This indicated that coinage single-atoms might be used to tune the catalytic properties of Pt surface under hydrogen media. In contrast, bulk stability within wide range of temperature and pressure is predicted for all other M-single atoms, which might act as bulk promoters. This work provides insightful guides and understandings of M-promoted Pt NPs by predicting both the evolution of the shape and the surface compositions under reaction gas condition.

Insight into the transient inactivation effect on Au/TiO2 catalyst by in-situ DRIFT and UV–vis spectroscopy

Au catalysts have drawn broad attention for catalytic CO oxidation. However, a molecular-level understanding of the reaction mechanism on a fast time-resolved scale is still lacking. Herein, we apply in situ DRIFTS and UV-Vis spectroscopy to monitor the rapid dynamic changes during CO oxidation over Au/TiO₂. A pronounced transient inactivation effect likely due to a structural change of Au/TiO₂ induced by the reactants (CO and O₂) is observed at the beginning of the reaction. The transient inactivation effect is affected by the ratio of CO and O₂ concentrations. More importantly, during the unstable state, the electronic properties of the Au particles change, as indicated by the shift of the CO stretching vibration. UV-Vis spectroscopy corroborates the structure change of Au/TiO₂ surface induced by the reactants, which leads to a weakening of the Au catalyst’s ability to be oxidized (less O₂ adsorption), resulting in the transient inactivation effect.

A molecular-level understanding of the Au-catalyzed CO oxidation on a fast time-resolved scale is still lacking. Here the authors monitor the rapid dynamic changes during CO oxidation over Au/TiO2 using in situ DRIFTS and UV-Vis spectroscopy, and reveal that the catalyst undergoes a surprising structural change at the beginning of the reaction.

Realistic Modelling of Dynamics at Nanostructured Interfaces Relevant to Heterogeneous Catalysis

The focus of this short review is directed towards investigations of the dynamics of nanostructured metallic heterogeneous catalysts and the evolution of interfaces during reaction—namely, the metal–gas, metal–liquid, and metal–support interfaces. Indeed, it is of considerable interest to know how a metal catalyst surface responds to gas or liquid adsorption under reaction conditions, and how its structure and catalytic properties evolve as a function of its interaction with the support. This short review aims to offer the reader a birds-eye view of state-of-the-art methods that enable more realistic simulation of dynamical phenomena at nanostructured interfaces by exploiting resource-efficient methods and/or the development of computational hardware and software.