Epitaxial Growth of Step-Like Cr2 S3 Lateral Homojunctions Towards Versatile Conduction Polarities and Enhanced Transistor Performances

Polarized Raman spectroscopy study of CVD-grown Cr2S3 flakes: unambiguous identification of phonon modes

We report a systematic Raman spectroscopy investigation of chemical vapor deposited 2D nonlayered Cr2S3, with both linearly and circularly polarized light over a wide temperature range (5-300 K). Temperature-dependent Raman spectra exhibit a good linear relationship between the peak positions of the phonon modes and temperature. Angle-resolved polarized Raman spectra reveal the polarization-dependent optical response of in-plane and out-of-plane phonon modes. Helicity-dependent Raman investigations complete definite assignment of all the phonon modes observed in the Raman spectra of 2D nonlayered Cr2S3 by the optical selection rule based on a Raman tensor. Our work realizes clear phonon mode identification over a wide temperature range for the emerging material 2D Cr2S3, an important representative of nonlayered 2D system with unique properties for optoelectronic and spintronic applications.

Liquid Phase Exfoliation of Few-Layer Non-Van der Waals Chromium Sulfide

Exfoliation of 2D non-Van der Waals (non-vdW) semiconductor nanoplates (NPs) from inorganic analogs presents many challenges ahead for further exploring of their advanced applications on account of the strong bonding energies. In this study, the exfoliation of ultrathin 2D non-vdW chromium sulfide (2D Cr2S3) by means of a combined facile liquid-phase exfoliation (LPE) method is successfully demonstrated. The morphology and structure of the 2D Cr2S3 material are systematically examined. Magnetic studies show an obvious temperature-dependent uncompensated antiferromagnetic behavior of 2D Cr2S3. The material is further loaded on TiO2 nanorod arrays to form an S-scheme heterojunction. Experimental measurements and density functional theory (DFT) calculations confirm that the formed TiO2@Cr2S3 S-scheme heterojunction facilitates the separation and transmission of photo-induced electron/hole pairs, resulting in a significantly enhanced photocatalytic activity in the visible region.

Lithium Ion Intercalation-Induced Metal-Insulator Transition in Inclined-Standing Grown 2D Non-Layered Cr2S3 Nanosheets

Gate-controlled ionic intercalation in the van der Waals gap of 2D layered materials can induce novel phases and unlock new properties. However, this strategy is often unsuitable for densely packed 2D non-layered materials. The non-layered rhombohedral Cr2S3 is an intrinsic heterodimensional superlattice with alternating layers of 2D CrS2 and 0D Cr1/3. Here an innovative chemical vapor deposition method is reported, utilizing strategically modified metal precursors to initiate entirely new seed layers, yields ultrathin inclined-standing grown 2D Cr2S3 nanosheets with edge instead of face contact with substrate surfaces, enabling rapid all-dry transfer to other substrates while ensuring high crystal quality. The unconventional ordered vacancy channels within the 0D Cr1/3 layers, as revealed by cross-sectional scanning transmission electron microscope, permitting the insertion of Li+ ions. An unprecedented metal-insulator transition, with a resistance modulation of up to six orders of magnitude at 300 K, is observed in Cr2S3-based ionic field-effect transistors. Theoretical calculations corroborate the metallization induced by Li-ion intercalation. This work sheds light on the understanding of growth mechanism, structure-property correlation and highlights the diverse potential applications of 2D non-layered Cr2S3 superlattice.

Stoichiometry-Tunable Synthesis and Magnetic Property Exploration of Two-Dimensional Chromium Selenides

Emerging 2D chromium-based dichalcogenides (CrXn (X = S, Se, Te; 0 < n ≤ 2)) have provoked enormous interests due to their abundant structures, intriguing electronic and magnetic properties, excellent environmental stability, and great application potentials in next generation electronics and spintronics devices. Achieving stoichiometry-controlled synthesis of 2D CrXn is of paramount significance for such envisioned investigations. Herein, we report the stoichiometry-controlled syntheses of 2D chromium selenide (CrxSey) materials (rhombohedral Cr2Se3 and monoclinic Cr3Se4) via a Cr-self-intercalation route by designing two typical chemical vapor deposition (CVD) strategies. We have also clarified the different growth mechanisms, distinct chemical compositions, and crystal structures of the two type materials. Intriguingly, we reveal that the ultrathin Cr2Se3 nanosheets exhibit a metallic feature, while the Cr3Se4 nanosheets present a transition from p-type semiconductor to metal upon increasing the flake thickness. Moreover, we have also uncovered the ferromagnetic properties of 2D Cr2Se3 and Cr3Se4 below ∼70 K and ∼270 K, respectively. Briefly, this research should promote the stoichiometric-ratio controllable syntheses of 2D magnetic materials, and the property explorations toward next generation spintronics and magneto-optoelectronics related applications.

Phase and Composition Engineering of Self-Intercalated 2D Metallic Tantalum Sulfide for Second-Harmonic Generation

Self-intercalation in two-dimensional (2D) materials is significant, as it offers a versatile approach to modify material properties, enabling the creation of interesting functional materials, which is essential in advancing applications across various fields. Here, we define ic-2D materials as covalently bonded compounds that result from the self-intercalation of a metal into layered 2D compounds. However, precisely growing ic-2D materials with controllable phases and self-intercalation concentrations to fully exploit the applications in the ic-2D family remains a great challenge. Herein, we demonstrated the controlled synthesis of self-intercalated H-phase and T-phase Ta1+xS2 via a temperature-driven chemical vapor deposition (CVD) approach with a viable intercalation concentration spanning from 10% to 58%. Atomic-resolution scanning transmission electron microscopy-annular dark field imaging demonstrated that the self-intercalated Ta atoms occupy the octahedral vacancies located at the van der Waals gap. The nonperiodic Ta atoms break the centrosymmetry structure and Fermi surface properties of intrinsic TaS2. Therefore, ic-2D T-phase Ta1+xS2 consistently exhibit a spontaneous nonlinear optical (NLO) effect regardless of the sample thickness and self-intercalation concentrations. Our results propose an approach to activate the NLO response of centrosymmetric 2D materials, achieving the modulation of a wide range of optoelectronic properties via nonperiodic self-intercalation in the ic-2D family.

Controllable CVD Growth of 2D Cr5Te8 Nanosheets with Thickness-Dependent Magnetic Domains

As a unique 2D magnetic material with self-intercalated structure, Cr₅Te₈ exhibits many intriguing magnetic properties. While its ferromagnetism of Cr₅Te₈ has been previously reported, the research on its magnetic domain remains unexplored. Herein, we have successfully fabricated 2D Cr₅Te₈ nanosheets with controlled thickness and lateral size by chemical vapor deposition (CVD). Then magnetic property measurement system revealed Cr₅Te₈ nanosheets exhibiting intense out-of-plane ferromagnetism with a Curie temperature (T_C) of 176 K. Significantly, we reported for the first time two magnetic domains: magnetic bubbles and thickness-dependent maze-like magnetic domains in our Cr₅Te₈ nanosheets by cryogenic magnetic force microscopy (MFM). The domain width of the maze-like magnetic domains increases rapidly with decreasing sample thickness; meanwhile, the domain contrast decreases. This indicates the dominant role of ferromagnetism shifts from dipolar interactions to magnetic anisotropy. Our research not only establishes a pathway for the controllable growth of 2D magnetic materials but also points toward novel avenues for regulating magnetic phases and methodically tuning domain characteristics.

Advanced Strategies in Synthesis of Two-Dimensional Materials with Different Compositions and Phases

In recent years, 2D materials-M_a X_b with different compositions and phases have attracted tremendous attention due to their diverse structures and electronic features. The common thermodynamically stable 2H and metastable 1T phases have been extensively studied, however, there are many unusual compositions and phases with novel physical properties that have yet to be explored. Therefore, summarization of the synthesis strategies, atomic structures, and the unique physical properties of 2D materials with different compositions and phases is very important for their development. In this review, the strategies including chemical vapor deposition, intercalation, atomic layer deposition, chemical vapor transport, and electrostatic gating for synthesizing various 2D materials with different phases and compositions are first summarized. Specially, the intercalation strategies including heterogeneous- and self-intercalation for controllable phases and compositions fabrication are mainly discussed. Then, the novel atomic structures of 2D materials are analyzed, followed by the fascinating physical properties including ferroelectricity, ferromagnetism, superconductivity, and so on. Finally, the conclusion and outlook are offered including the challenges and future prospects of 2D materials with different compositions and phases.

P-Type 2D Semiconductors for Future Electronics

2D semiconductors represent one of the best candidates to extend Moore's law for their superiorities, such as keeping high carrier mobility and remarkable gate-control capability at atomic thickness. Complementary transistors and van der Waals junctions are critical in realizing 2D semiconductors-based integrated circuits suitable for future electronics. N-type 2D semiconductors have been reported predominantly for the strong electron doping caused by interfacial charge impurities and internal structural defects. By contrast, superior and reliable p-type 2D semiconductors with holes as majority carriers are still scarce. Not only that, but some critical issues have not been adequately addressed, including their controlled synthesis in wafer size and high quality, defect and carrier modulation, optimization of interface and contact, and application in high-speed and low-power integrated devices. Here the material toolkit, synthesis strategies, device basics, and digital electronics closely related to p-type 2D semiconductors are reviewed. Their opportunities, challenges, and prospects for future electronic applications are also discussed, which would be promising or even shining in the post-Moore era.

Constructing a High-Quality t-Se/Si Interface Via In Situ Light Annealing of a-Se for a Self-Powered Image Sensor

The quality of the interface, e.g., the semiconductor-semiconductor or metal-semiconductor interface, is the main factor restricting the photodetection performance of a heterojunction. In this study, a high-quality Se/Si interface is constructed via in situ directional transformation of amorphous Se (a-Se) into crystalline Se (t-Se) on a Si substrate via light annealing. Benefitting from the high-quality interface and appropriate energy band between Si and Se, the t-Se/Si heterojunction exhibits an extremely high responsivity and detectivity of 583.33 mA W^-1 and 8.52 × 10¹² Jones at 760 nm, respectively. In addition, the device exhibits an ultrafast rise time of 183 µs and a decay time of 405 µs. Furthermore, an image sensor fabricated via local light annealing successfully recognizes patterns of "N," "P," and "U." This study provides valuable guidance for the construction of high-quality interfaces and the design of self-powered image sensors.